OpenSUSE Install :: ATI Fglrx Drivers - Cannot Boot Into Normal Mode
Jan 15, 2011
I've installed fglrx drivers with 1click install on openSuse11.3. If I try to boot in "normal mode" I end up in black screen. However if I boot in safe mode, then login and startx, everything works ok
Code:
~> fglrxinfo
display: :0.0 screen: 0
OpenGL vendor string: ATI Technologies Inc.
OpenGL renderer string: ATI Mobility Radeon HD 4300 Series
OpenGL version string: 3.3.10151 Compatibility Profile Context
Shows fglrx works OK, as well as overall performance is pretty good.
I've done
Code:
aticonfig --initial
radeon drivers is also blacklisted
but running (if it means something)
Code:
# depmod -a; lsmod | grep radeon
radeon 868858 0
ttm 64561 1 radeon
drm_kms_helper 32944 1 radeon
drm 221516 3 radeon,ttm,drm_kms_helper
i2c_algo_bit 6728 1 radeon
View 4 Replies
ADVERTISEMENT
Mar 10, 2011
Just a little disappointed. I downloaded the 11.4 Gnome by about midnight, checked the CD for integrity,and started the Live CD, and it worked quite well. Installed it, but troubles started. OpenSuse 11.4 won't boot up in the normal mode, but would boot up in the safe mode only. I am now writing from the safe mode, but would like to boot up normally. It get stuck after the first verbose page. And not a move from there. The laptop is Lenovo T400, Core2Duo with 4GB RAM, screen 1440x900. No problem with any other distros up to now.
View 9 Replies
View Related
Jan 2, 2010
I played with the graphics in kde4 and seem to have losy my installation. i have tried the rescue system option, recover system options and in desperation (i was just about to reinstall) tried booting in failsafe mode, and it worked!
where do i go to find out what the problem is regarding the normal boot mode? i think my pc is starting to resent the continual use of the reset button!
View 6 Replies
View Related
Apr 23, 2010
how do I make grub boot to allow me to choose, like safe mode and normal mode and all that second, how do I do automated back ups (preferably using file copy) for something like every sunday at 11:00 am using the command line, i use to know but forgot.
View 1 Replies
View Related
Mar 31, 2011
I'm currently using the default, open-source drivers. I'm aware that the ATI proprietary drivers have been released as a pre-release DL. How do I go about installing it? Is there a process I need to stick to? [URL]...
View 6 Replies
View Related
Aug 24, 2010
I've installed on my workstation the opensuse 11.2! After the reboot when I enter the username/password, nothing occurs... On the other hand, it's running well with the failsave, why??
Code:
title openSUSE 11.2 - 2.6.31.5-0.1
root (hd0,1)
kernel /boot/vmlinuz-2.6-etc... root=/dev/disk/by-id/ata-etc...
resume=/dev/disk/by-id/ata-etc....
splash=silent quiet showopts vga=0x317
initrd /boot/initrd-2.6.31.5-0.1-default
[Code]...
View 5 Replies
View Related
Nov 13, 2010
I'm posting this in the "General Help" category, because it doesn't really fit in another one. Feel free to move this thread, if it's the wrong place. I'm having a problem with my Linux. Since today, my Kubuntu 10.10 (running on an Dell XPS M1530) doesn't but anymore.
Neither normal, nor recovery-mode is working. I also tried out different kernels in the grub-menu without any success. The boot-process stops at:
Code:
...
...
[2.115441] EXT4-fs (sda2): mounted filesystem with ordered data mode: Opts: (null)
Begin: Running /scripts/local-bottom ... done.
done.
[code]....
View 7 Replies
View Related
Dec 22, 2010
Shut down the machine yesterday, got an error booting today. Since I'm new to Ubuntu (been using it for about a month now), I don't know what logs to check, what utilities to run, where to find bootup error message so I can copy here. I am now using it in recovery/low-graphics mode.
View 3 Replies
View Related
Jul 9, 2011
I have been running 11.4 now for quite a while. I installed maintenance to it trough Yast's Online update and now can't boot except through the failsafe mode of GRUB. How can I pinpoint where the failure is?
View 3 Replies
View Related
Dec 22, 2010
I have been trying to install fglrx drivers for my ATI card with Debian testing (x86) but without any luck. I have tried what it says here http://wiki.debian.org/ATIProprietary but I only come up with a blank screen (and also invoke-rc.d gdm stop does not work either?) I have also followed the directions at [URL]....html and that doesn't work either (make error 127). I must be doing something totally wrong.
View 6 Replies
View Related
Jul 6, 2011
In summary, after updating from 11.2 through 11.3 to 11.4, normal boot works fine, failsafe mode hangs with two fatal errors - "Module atiixp not found" and "Module ide-pci-generic not found". i would like to fix this a) so I have a recovery position b) so I learn a little more. As 11.2 has gone out of support I decided to embark on the upgrades to 11.3 then 11.4 using the zypper method described on this site. I think failsafe boot worked ok with the original 11.2 install, but I never had to use it in anger, so I can't be 100% sure. I did not test failsafe in 11.3, just checked that the typical cd set of applications seemed ok before proceeding with the upgrade to 11.4.
I have an AMD processor, chip set and an ATI 3800 series graphics card, so I added the ATI repositories for 11.3 and 11.4 as i worked through the upgrades. At 11.4 there were some graphics glitches during normal and failsafe boot which were successfully fixed by adding "nomodeset" to both boot options. Normal boot works fine but failsafe boot hangs with the error messages above. Searching for failsafe boot errors is unhelpful since, in all cases I have checked, normal boot fails too. I did try removing "Xfailsafe" from the failsafe options which produced no change.
I am guessing that, in failsafe mode, the ATI drivers are not loaded into the kernel and the idea is to default to some safer drivers which, in my case, are not present for some reason. However, there seems to be little information on the origin or purposes of atiixp so I don't know how to go about fixing this. I have not really researched the generic pci driver issue, but I am guessing that this is a fall back when the expected atiixp is missing.
View 8 Replies
View Related
Jun 28, 2011
I tried to make Compiz work using the experimental 3D support of the free Nvidia driver, because I am suffering from a bug in the proprietary driver (click here for launchpad entry). The free driver I mean is the one that shows up as "Experimental 3D support for NVIDIA cards" in the "Additional Drivers" manager (note: for some reason, this option will only present itself when no proprietary driver is currently active).
Now the strange thing is: the driver does not provide 3d support, and behaves generally awful (lots of glitches and so on) when I boot my system normally. But when instead I boot from the grub menu into recovery mode, then select "failsafe graphics", and then select "restart X", the whole thing works perfectly! So now I am running the experimental 3d driver, I have compositing working, 3d animations on docky. Somehow, the failsafe boot sequence does something right that my normal boot sequence does not. When I reboot in normal mode, everything is screwed up again.
I have no idea what statistics about my system I should include here, because I really have no idea what could possibly be wrong. I am running 32bits Natty in Classic mode, on an Ahtlon Dual Core 4850e machine, with a GeForce 6150 LE graphics card. These are the normal and recovery entries in my grub.cfg:
Code:
menuentry 'Ubuntu, with Linux 2.6.38-8-generic-pae' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
set gfxpayload=$linux_gfx_mode
insmod part_msdos
[code]....
View 2 Replies
View Related
Dec 30, 2009
I have a problem with my computer since it's behaving good in failsafe but is bad in normal mode for example I get no wireless in normal mode.
View 1 Replies
View Related
Nov 1, 2010
I am new to Linux. When I installed some applications and something through package manager,Now I get two added options in boot loader with identical names like failsafe and normal. what is that?multiple kernel?
View 3 Replies
View Related
Apr 17, 2011
I noticed that after making my build in suse studio my system freezes immediately after GRUB ( Normal or Failsafe) boot splash screen. I also noticed that this happens only with the specified kernel below. I'm not sure when using Kernel 2.6.37, one had the same problem. I never used it. The original kernel 2.6.34 had no problems such as the one I have described. My systems has no further problems only that it takes several restarts to go past the "Freeze". Below is a list of my system specs:
openSUSE 11.3
Kernel-pae 2.6.38.2-4.1 from Kernel Stable.
GRUB 0.97-174.1 from openSUSE 11.4
Upstart 0.6.5-33.1
xorg-x11-server 7.6_1.9.3-142.1 from X11:xorg 11.3 repo.
The GRUB from openSUSE 11.4 has been very stable and non-problematic. I will be buying an Intel core i5-2500K in a few months that's why I need the latest kernel and XOrg-X11-server. What could be causing the freezing?
View 6 Replies
View Related
Dec 7, 2010
I accidentally chose the "recovery mode" and now i dont know what to do. What commands i have to enter to go back to normal ubuntu mode with graphic etc?
View 9 Replies
View Related
Dec 14, 2010
my linux pc is connected to a lcd monitor with native resolution 1280x1024.The font at the textconsoles is too small for me.
I changed the entry "vga=..."in the file /boot/grub/menu.lst to "vga=0x0314".During the first few seconds the screen-resolution matches the setting of the vga-mode, but after then the vga-mode automatically switches to 1280x1024 (only at the textconsoles).The x-server is configured to 800x600 which is the resolution I want.I also tried vga=normal and vga=788. In older suse-version 10 and lower never had this problem.
View 7 Replies
View Related
Jul 14, 2011
I have installed openSUSE 11.4, and I really like it compared to other linux versions I've tried, but I find it requires a bit more linux know-how.
Being fairly new to linux, it has been quite the effort to learn but I started getting the hang of things via online support and such. Lately I've been having some problems.
I need linux to run a TCAD program, and it requires some openGL functionality and was giving me errors when I tried entering the software related modeling GUI.
Anyhow, I thought it had to do with my graphics drivers, so I decided to update them via ATI proprietary driver. After doing this, the system booted me into the console rather than X.
I tried numerous online guides on how to fix the issues, by running all sorts of boot commands (nomodset), and I read the graphics driver theory, as well as trouble shooting ATI graphics.
In the process, I also installed a radeonhd-xorg11-something through YAST, and that caused a black screen altogether upon boot. I managed to boot into failsafe with x, and from there I removed it via YAST, however this did not resolve issues. I also deleted any xorg.cionf files in hopes that the system will default back to the radeon driver.
As it stands right now, I can only boot into my system via failsafe mode. I'm keeping the unit off for now as it's probably tired from all the hard reboots I had to do . If someone can help me resolve this issue, I can turn it on and enter any commands required, such as finding out the graphics card, the kernel, the driver currently running, etc and I can post it here.
View 9 Replies
View Related
Aug 8, 2010
I started having this issue two days after installing openSUSE. When I try to boot it on battery (that is, without a energy plug) the laptop just turn off right at the beginning. I have other OS's installed and they are working properly and booting when in battery mode. I haven't got a clue of what I need to check to fix this, can anyone help me out? My laptop is a vostro V13.
View 2 Replies
View Related
Oct 27, 2010
Running Suse 10.3, desktop box, Asus M2NPV-VM, Athlon 64 3800+, two HDD RAID 1 config. I was getting 'bad block' errors when logging into Root, ran a search for fsck to try and fix the problem. Found out not a good idea to run while the system is mounted, tried to boot from install DVD, could not boot to a command prompt, tried to open the Repair tool, got a 'repair failed' message. Rebooted again to the HDD, but now it hangs, tried to go to Failsafe mode, same thing.
Was able to boot to Recovery mode, but not sure where to go from here. I also noted when booting to the HDD in 'verbose' mode it was showing a lot of 'irrecoverable error's on the boot logs concerning the HDD.
View 9 Replies
View Related
May 2, 2011
I've got this really huge problem, which I really want to solve, because otherwise I might even switch back to ubuntu. So here we go. Yesterday, I had a problem with mounting nfts hard drives and solved (you guys solved it actually) it by adding ntfs to the /etc/filesystems file. (I doubt, that it has anything to with that, but it might, so I will just tell you everything I did) I added an ATI driver repository as well, which is probably the key to this problem.(or at least something with drivers) --> not sure if I installed anything
So however, the problem is now, that the screen tells me, the signal would die just before the log in screen appears. ("No signal" --> screen goes to standby --> can't wake it up again--> no opensuse for me) I'm now running the system in some sort of safe mode and it works, but I think, that it is using my on board graphic card and not the actual "radeon hd 5600", which provides much better quality. just looked it up, yes it is using the crappy one (on board) So here's the question: First of all why does this error occur(worked fine before) and secondly how can I fix it?
View 9 Replies
View Related
Aug 1, 2010
I have an encrypted file system and recently installed proprietary ATI drivers for my graphics card. The moment I did that, Ubuntu boots with a black screen. Now I'm attempting to get back into the OS to remove the drivers, but when I choose Ubuntu Recovery Mode from the grub boot screen, it shows some dmesg output and then the screen goes black. Whats interesting is it doesn't even ask me to decrypt the hard drive (like it normally does). how I can get back into the OS to remove the drivers?
View 4 Replies
View Related
Jan 18, 2010
i am not able to start gnome desktop though most gnome applications work in icewm and xfce4 newly installed. the system config edit button i cannot understand what keys where to edit? how do we reinstall gnome fully? by the way my system is
intel 845 mother board[gigabyte]
LG Studioworks 520Si monitor.
250 80 Gb disks
512mb mem
LG dvd writer
View 9 Replies
View Related
Jul 29, 2010
I burned the live version of OpenSUSE 11.3 (Gnome, 32bit) to a CD to test the compatibility of an HP Pavilion p6510f. Although Xubuntu 10.4 booted up fine, OpenSUSE did not. A message about RAID would appear (too briefly to read) and then the computer would reboot.I checked in the BIOS and found that the SATA drive has 3 modes: IDE, RAID and AHCI. The hard drive was set to RAID.
When I changed the hard drive mode to IDE, I was able to run the OpenSUSE live CD; but the change ruined my Windows installation. Windows doesn't boot under IDE or RAID mode. (I have reset the mode to RAID and am restoring the Windows installation.) Is there an option/argument that I can pass to the kernel so that OpenSUSE will work under RAID mode? (Since Xubuntu 10.4 was able to do it, I'm assuming OpenSUSE should be able to.)
View 9 Replies
View Related
Apr 24, 2011
Basically everything was going fine, and i was enjoying the OpenSuse experience, then downloaded djl (Games Launcher) , installed some games and found that i had a very very very bad frame rate (about 1FPS), and my GPU is a NVIDIA GTS250 (1GB), and runs most games flawlessly under m$, so i went about installing the graphics drivers for my card. I followed the instructions and was under the assumption that i installed the correct ones, but now i cannot boot into any graphical interface. I think that it should be a graphics issue, as this was one of the few things done before rebooting. I have tried booting into the normal mode, and the failsafe, I have read many other "Not booting'' posts, and have tried their solutions without success, there include: Changing the boot parameters Logging in and manually trying to boot up the gui (init 3.... init 5... etc)
When the computer tries to load up OpenSuse in normal mode, it comes up with the normal loading screen, and then about 90% of the way it stops for about 30 seconds, and then switches over to a CLI, asking for a login, going through the log a couple of things fail, did have these noted down (but cannot find and will post along with other commands that i am asked to do) I want to try and avoid a reinstall as it took me a long time to get the WiFi card working.
View 9 Replies
View Related
Aug 26, 2011
I've recently jump from the Ubuntu/Mint ship, and figured I've give a polished KDE distribution a shot. Of course I turned to OpenSuSE, and I love it so far. I've resisted KDE quite a lot since 4.x came out but it's really come along. Much better than the (in my opinion) monstrous disaster that Gnome has become.
Anyways, on to my problem: I've installed the proprietary Nvidia drivers via the one-click-install shown in the wiki, and that worked great. But now my resolution at boot - that is the boot/loading screen, not my desktop - is shown at a very low resolution instead of my native resolution, like it was with OpenSuSE's default open-source Nvidia driver, which I'm guessing is Nouveau. On Ubuntu, this was pretty easy to correct; all you had to do was edit /etc/default/grub and put your resolution there, and tinker with some other options so that instead of Plymouth trying to set its own, it just carries over Grub's specified resolution. But I can't seem to do that with OpenSuSE. For one, I don't see /etc/default/grub, and more than that, I don't think you guys use Plymouth. I could be wrong on that second point, though. So, how can I change the boot screen's resolution to my native resolution? I'm using the latest Stable release (11.4) and latest Nvidia drivers. Other than that, the install is new.
View 5 Replies
View Related
Jul 6, 2010
A little while ago i bought a magazine with the openSUSE 11.1 distro on it but couldn't install it so i gave up. I am attempting to have another go. The problem is that the os will work fine when booted from CD in fail safe mode and can be installed from there but when out of fail safe mode the system begins to boot but freezes and will do nothing more.
View 9 Replies
View Related
Nov 23, 2009
It's been a while since I last used the fglrx drivers, especially on my laptop which has an AMD RS690 based video adapter. While the Open Source drivers get the job done most of the time, and especially with Compiz-Fusion (yay!) these drivers still lack much optimization and since they don't intend to optimize the OpenGL stack for the current drivers and instead they'll work on it for the Gallium3D drivers, the situation is not going to get much better any time soon. However the Free drivers have gotten very robust and with very good support all in all.At first I used the fglrx drivers, but went with the Open Drivers for two main reasons:Radeon drivers were the first to get true KMS support, so they fully supported Plymouth.
Fgrlx drivers had (or still have?) a hideous bug in that they would cause screen flicker and tearing all over the place if you had a composited desktop. Wasn't as bad with Metacity's Composer Manager compared to Compiz, but still very annoying. Also they didn't properly had (or still have) RandR 1.2 support which means that if you attach a secondary display, you can't configure it as a different screen at a different resolution (for instance, main laptop display running at native 1280x800 and the secondary screen, like a projector, running at 1024x768), which the Open drivers get most of the time (note this isn't perfect in the open drivers either).
So i wanted to give the fglrx drivers a whirl once again and see how do they run... However I do not fully remember the steps involved in getting Plymouth running with the VGA/VESA console driver and the fglrx drivers (all I can remember is that it involved rebuilding the initrd [which in F12 is initramfs] to leave out the Radeon driver and you could still use the vga=[mode] argument to get Plymouth), the only other thing I can remember is that you had to run plymouth-set-default-theme to get the theme back. The main thing stopping me from going back to fglrx is that I'm not sure if all the composite issues have been resolved.
View 2 Replies
View Related
Jan 17, 2011
I'm running 10.10 from an 8GB USB flash drive with persistence to see if I can get it working the way I need it before I can completely transition from Windows. I have an onboard ATI Radeon HD3300 running dual monitors which is on the list of supported devices for the FGLRX driver package, but I've encountered multiple issues.
First, when I chose to activate it from the Add'l Drivers dialog, it gave an error: "SystemError: installArchives() failed". I found a forum where someone had suggested opening the Terminal and giving the following commands:sudo aticonfig --initialfollowed bysudo rebootWhen my system rebooted, the Ubuntu screen showed "Ubuntu 10.10" in a plain font instead of the Ubuntu graphical logo, and then it quickly displays an error in a dark-colored font and then the screen flickers several times before stopping at a full-screen terminal. I have never used Linux before, so I don't know any commands at all or even what to do from here. I just want the dual screens to work and have the correct resolution.
Am I going to have to format and reload my flash drive again?
View 1 Replies
View Related
Dec 17, 2010
I am posting this to see if anyone else has had an issue with Vmware Workstation 7.1 using unity mode with a Linux Host. The issue I am having is when I try to move a window from my virtual machine in unity mode the screen crashes and then disappears. Everything seems to work while not in unity mode. I have tried various thing like disabling 3d mode in VMware, disabling various KDE effects. I only have these problems with a dual monitor setup, if I switch to a single monitor everything works just fine.
[Code]....
View 1 Replies
View Related
