Ubuntu :: 1.10 - Unity Missing Drivers Without Identifying

Dec 29, 2010

Tried to test the 10.10 Netbook's Unity but after keying the password I got a "Unity missing driver" without any identification of the driver. Is it available in the repositories? How can I identify it to install it? Why isn't it included?

View 5 Replies


ADVERTISEMENT

Debian Installation :: Missing Network Drivers / And Missing Make To Install Them

Dec 1, 2014

I have an asus pc, and its network hardware is not recognized by debian, the drivers are not even in the list provided during the installation process. I managed to download them from another pc, but if i try to make them and install them, i'm stucked because Make is not installed on debian (nor is sudo).So i need a connection to install the drivers that provide me a co0nnections..

View 4 Replies View Related

Ubuntu / Apple :: Drivers For Unity On MacBook

Jan 10, 2011

I have maverick currently installed on my MacBook 2,1 (mid-2007 model) and I decided to get myself an iso of the natty alpha 1 to run in a VM. When I booted into it, it said I couldn't run unity because I didn't have the required drivers. I kinda expected that (it's a pretty old computer, though it runs fast), but I'd like to know where I could maybe get a supported driver for this model of Macbook.

View 8 Replies View Related

Ubuntu :: 11.04 - NVidia And Unity (Drivers Installed But Not In Use)

Apr 30, 2011

I've just installed the brand new Ubuntu 11.04 and all goes well until...I log in a session. There is a window telling me that my graphic card isn't too good to run Unity, when I have no problem under 10.10 to run all the eye-candy. Now I have a NVIDIA Quadro NVS 120M with 512 megs of memory. I've install the NVIDIA current driver in the Additional Drivers application and reboot. But nothing...in the additional driver app it says that the current driver is installed but not currently in use...what should I do before giving up and install unity-2d?

View 2 Replies View Related

Ubuntu :: Icons Are Missing From Unity Launcher ?

Apr 29, 2011

I've just installed the new Ubuntu 11.04 and encountered a strange problem. The Launcher bar appears, everything is ok, but i can see no icon on the Unity Launcher. When i move the mouse over the launcher, it tells me where the icons should be. The apps also open when I click in those places. But NO icon? Can anybody tell me why is this happening? It is very annoying. I would accept it easier if it didn't work at all.. but not this way.

View 3 Replies View Related

Ubuntu :: Weather Information Missing In Unity

Apr 29, 2011

Since the upgrade to Unity I cannot find the really nice weather/temperature information that used to be by the clock.

How can I get it back??

View 5 Replies View Related

Ubuntu :: Stop Unity To Install NVidia Drivers?

Jun 7, 2011

This is probably very simple but can someone tell me how I stop Unity in order to install graphics drivers?

View 2 Replies View Related

Ubuntu :: U11.04 Unity Panel Icons Missing / Get Them Back?

May 5, 2011

After playing around with Ubuntu Tweaks to remove the "Recent Documents" logging, I somehow ended up losing the icons for "Applications" and "Files & Folders".

I tried lots of different things but the only thing that seemed to sort it was this:

Log out. Log in under Ubuntu Classic (for some reason dropping back to tty with Ctr, Alt and F2 didn't do it). Bring up the terminal and do code...

Log back into Ubuntu (not classic) and hopefully, you should end up with all icons back as they were.

This worked for me but I can't remember if I'd gotten rid of the ".recent-documents.xbel" file in my home folder first, so if all else fails you could try that before you start removing and re-installing Unity.

View 4 Replies View Related

OpenSUSE :: VMWare Using Unity Mode With Twinview Using Nvida Drivers

Dec 17, 2010

I am posting this to see if anyone else has had an issue with Vmware Workstation 7.1 using unity mode with a Linux Host. The issue I am having is when I try to move a window from my virtual machine in unity mode the screen crashes and then disappears. Everything seems to work while not in unity mode. I have tried various thing like disabling 3d mode in VMware, disabling various KDE effects. I only have these problems with a dual monitor setup, if I switch to a single monitor everything works just fine.

[Code]....

View 1 Replies View Related

General :: Install Missing Sound Drivers In Ubuntu?

Mar 21, 2010

I seem to be missing drivers for my Gateway laptop MA7. I have looked in System->Admin->Hardware Drivers, but it does not show up in there.There are also no devices listed in Sound->Hardware. I'm guessing at this point that I don't have the driver installed.

However, I get the following output code...

View 1 Replies View Related

Ubuntu Servers :: 9.10 Server Cpufreq Missing Drivers

Apr 29, 2010

I'm running 9.10 server on a mini-itx board. The CPU is Core 2 Duo T5450 and supports Enhanced Speedstep and the BIOS is set to auto, enabling C1E.I've been trying to get cpufreq to work but none of the drivers are present.When I try to load suitable ones they are always not found.Does someone know if cpufreq is not supported on the server kernal? Or what command will apt-get the modules that aren't here now?I've been reading the cpufreq tutorials but can't get past loading a suitable driver - which means I'm nowhere now. My notebook runs the same CPU and cpufreq is working fine with desktop Ubuntu install of 9.10.

View 5 Replies View Related

General :: Ethernet Drivers Are Missing?

Apr 5, 2010

I installed FEDORA 8 on my laptop for a class project. everything went find except. with I attempt to connect to any network. I keep getting the no network device error. so I tried to install the Ethernet and wi-fi driver directly without success.

View 1 Replies View Related

Ubuntu Networking :: Missing Wireless Rt3070sta Drivers In Lucid

May 1, 2010

Has anyone managed to get wireless Ralink rt3070 drivers working in Lucid? Before in Karmic, you could "sudo modprobe rt3070sta" as they were "stagging" drivers already in the kernel, but apparently they're missing from the kernel in Lucid as reported here [URL]... I get errors when compiling the latest drivers from Ralink (DPO_RT3070_LinuxSTA_V2.3.0.2_20100412) and they don't seem to work.

View 3 Replies View Related

Ubuntu Installation :: NVidia Drivers Won't Install On 10.04. Missing Headers?

May 23, 2010

I'm trying to install the current drivers (from the Hardware Drivers tool) but it fails, refering me to jockey.log, which contains this:

Code:
2010-05-23 16:19:46,978 DEBUG: nvidia_current is not the alternative in use
2010-05-23 16:19:47,106 DEBUG: nvidia_current is not the alternative in use

[code]....

View 2 Replies View Related

Ubuntu Networking :: 10.10 - 3G USB Modem Drivers (Package Missing For WvDial)

Nov 20, 2010

1) I have micromax 372g usb modem(3g).. but it is not being connected ubuntu 10.10
2) I suppose my device is being recognized and I tried this method [URL] but when I tried to install, it said that package missing for wvdial.

What should I do. Where can I get this package and how can I install it (with no dependany check). My life is extremely difficult without internet on ubuntu, I am ready to give any other information that u need. I have ubuntu 10.10 maverick dual boot with windows. And yes take into consideration that I don't have internet on ubuntu. So provide me full detail how to install it from other media and commands to execute them.

View 9 Replies View Related

Ubuntu Networking :: Latest - No Wireless Drivers - Firmware Missing ?

Aug 6, 2011

I had 10.04 and my wireless worked out of the box.

I just installed the latest and my wireless says "firmware missing"

The card is : 00:09.0 Network controller: Broadcom Corporation BCM4306 802.11b/g Wireless LAN Controller (rev 03)

View 1 Replies View Related

Ubuntu :: Missing Icon In Unity Launcher "Label Empty"?

May 11, 2011

I just upgraded to Natty 11.04 and am getting used to the Unity Launcher. I was trying to add a terminal to the launcher and I'm not sure what I did but now if I copy the icon from nautilus "/usr/share/applications" over to the launcher it creates a blank space like the icon is missing but if you scroll over it and right click you see Label Empty / Keep in Launcher.

The weird thing is that if I create a link to terminal in /usr/share/applications and drag the link over to the launcher it appears as it should.

View 3 Replies View Related

Ubuntu Installation :: All Proprietary Drivers Missing After Upgrade To 8.04.2, Kernel 2.6.24-27-lpia?

Apr 26, 2010

I did open a bug for this as well:After upgrade to to Ubuntu 8.04.2, kernel 2.6.24-27-lpia all proprietary drivers are gone.Therefore, I cannot use wireless, webcam, sound, usb, etc... making work next to impossible. Does anyone know how to correct this easily and quickly so I am effective at work?

View 1 Replies View Related

Ubuntu :: Identifying CD Contents Without Booting With It?

Nov 6, 2010

So I have a bunch of CDs I have burnt over the past year or two, and only problem is, I would burn them, use it and forget about it. I never bothered labelling it. Now, I want to label them appropriately. Is there any way I can find out the following just looking at the CD contents-

1. Distribution - lucid / karmic / etc
2. Architecture - amd64 or i386
3. Type - server, desktop, alternate etc

I know if I boot into the machine from the CD drive, I can find out, but I prefer not having to do that

View 1 Replies View Related

Ubuntu :: Identifying UPNP Connections To Sever?

Jul 13, 2011

I have a setup with a mythtv backend that streams media via the built in upnp to two xbox 360s. This works perfect at the moment. However I need a command/script that can identify if either of the two xbox's are connected via upnp. I need this so that I can have the system auto shutdown if no one is connected using the existing mythtv sleep wake features. (Basically if a script returns 1 then dont shutdown if returns 0 then shutdown.)

Code:
if upnp is connected then
dont shutdown
else
shutdown
fi
Thanks
Chris

View 5 Replies View Related

Debian Installation :: 5.0.3 'Lenny Missing Drivers \ Doesn't Work At All?

Feb 27, 2010

In reply to my last question about Wireless incompatibility in Debian 5.0.3 'Lenny', I found out it was because of missing drivers that I chose to ignore, despite the notifications.Now I've got this problem again, this time with different hardware and a different distribution of Debian (Debian Testing 'Squeeze' i386). As well as asking me to load up ipw2100-1.3.fw (of which I already have), it asks me to load tigon/tg3_tso5.bin. Loading the firmware is no problem. Finding and downloading nthe firmware is the problem here.I've searched through packacges and bug reports for a dowload link, but I've only come across a bundle with the driver I need, as well as a few unneeded extras. IT doesn't work at all.

View 1 Replies View Related

Ubuntu Servers :: Identifying Drive Format To Mount?

Aug 3, 2010

I've installed Ubuntu Server, and Webmin following this guide, and all is well so far... I've mounted some drives with some pre-existing data on them, and can view the data on those drives. But I have one drive that I can't seem to mount, and I'm pretty sure there's data on it. But I can't seem to find how to identify what format the data is in, ie.. ntfs, ext2, ext 3, etc. Its likely pretty simple, but how can you identify the drive format before you attempt to mount it?

View 2 Replies View Related

Debian Installation :: Loading Missing Firmware - Failure To Detect Drivers

Aug 5, 2014

So, I am having certain issues regarding Debian installation. Since my Wi-Fi card, Intel PRO/Wireless 3945ABG, requires non-free drivers not provided within Debian install image, I am bound to use USB stick during installation process to get those drivers, iwlwifi-3965-1.ucode and iwlwifi-3965-2.ucode, to enable Wi-FI on my system. However, no matter what I do, I cannot get debian-installer to detect drivers present on the machine. I have tried virtually everything - downloading drivers from multiple sources, renaming drivers properly, using ext4 instal of fat32, using gpt instead of msdos, placing files in /firmware instead of root directory - but no matter what I do, the outcome is the same. USB stick seems to be working properly. Am I bound to downloading non-free image now, or is there a solution?

View 9 Replies View Related

SUSE :: Drivers Missing - Wireless Not Working - Poor Display Quality?

Nov 29, 2010

I installed openSuSE 11.2 sometime ago in a COMPAQ Presario CQ60-419WM laptop (the ones that Wal-mart sold for $300 about a year-and-a-half ago. I installed the 64-bit version because I saw that the processor could support that (perhaps that was not a good idea). I have some problems that seem related to not having the necessary drivers. My wireless has never worked and my display is far from what I would like it to be (the response is slow, if a drag a window, its motion is jerky, if I scroll down in a browser window, the motion is wavy). The look and feel is very different from what I get at work and I do not know how to fix it.

[code]...

View 3 Replies View Related

Networking :: Identifying Multiple Ssh - Tunnels?

Sep 7, 2010

got the problem with multiple ssh-tunnels. The case is:I have 1 server running Slackware 13.0 with external ip and few windows-machines. inetd daemon is running on the server, my script is listening on port 2345. I create multiple ssh-tunnels from client machines to the 2345 port of the server in order to initiate script execution. For debugging reasons the script simply echoes the incoming information to the connection initiator. This is how the connection is initiated.

Code:
ssh <user>@<my_server_IP> -L 5555:<my_server_IP>:2345
echo "hello"|nc -vn 127.0.0.1 5555 (a port on a client-machine, that is forwarded to <my_server_IP>:2345)
gives "hello" output.
Code:
client1 port 5555|----ssh-tunnel---- eth0|-------server---------------|

[Code]...

The problem is that i need my script to execute some commands (registry parsing) on a remote client machine with winexe utility. So I need to identify each tunnel or each connection in order to execute the command on each of the client workstations. I need at least to have access to some ID of the ssh session or a tunnel, through which a certain connection was initiated and then use it to create a reverse tunnel or just connect to certain client via that client`s tunnel.

View 3 Replies View Related

Networking :: Identifying Where The Network Connection Is Being Cut-off From?

Feb 4, 2010

Starting from January, my Internet connection has become "unstable". I mean that I get occasional interruptions of the connection. This is particularly annoying while listening to a webradio or using voip. Of course, prior to January 2010, I could stay hours or days without interruptions. Now, I have to reconnect manually every 5 min to the service although the reconnection to the ISP is done immediately. So, before I take my axe and visit the office of my ISP, I would like identify where is that connection drop happening. Is it at my pc? at the ADSL modem/router? or the ISP? I use a wireless connection with WPA to my router. Then, the router is basically an ADSL modem. I am running Kubuntu locally. How can I follow up on the network status between different elements and see who is cutting off my connection?

View 1 Replies View Related

Server :: Identifying Links To A File?

Dec 23, 2010

How do we check as to how many links have been created that point to a particular file?

Let's say there is this file /work/contacts.dat

and we have, let's say, 10 soft links that have been created by different users in their home directories. Now how can I figure by looking at the file /work/contacts.dat that there are 10 (soft or hard)links pointing to this particular file so that I know that it is being used or refered to by those many users and before deleting it I can check with them.

View 3 Replies View Related

Software :: Red Hat 9 - Replicating And Identifying The Root Cause

May 31, 2010

I just encountered a very weird issue and I am having hard time replicating and identifying the root cause. We have one RH9 server and we received an alert that the /var reached 85%, I checked and found out that /var/log/audit.d is occupying most of the space. It has a lot of files inside it consisting file size of 21MB each everyday. I ask the customer if can housekeep and it eventually climbed up to 100%. My colleague did some house keeping but what he did was he compressed the audit.d directory and remove it.

After that users are complaining they cannot telnet to the server even though the service is on. I have recreated the audit.d directory and restarted the xinetd as usual. Still the same problem. And the weird thing is that I cannot even switch to any user from the root. I tried to do "su - someuser" but it hangs there without doing anything. I also tried to telnet, it will ask for login and password but same thing it hangs in there. Did some restart on xinetd and did "chkconfig telnet off" "chkconfig telnet on" but with no success. Could this be caused by the deletion of audit.d? Or is the 100% utilization of /var the system could not cope up? The good thing is everything worked fine after restart. But still the root cause is unknown. If I check /var/log/secure it shows the user being authenticated though it is not getting any session. /var/log/messages also does not reveal anything.

View 3 Replies View Related

Ubuntu Installation :: System / Fails Due To It's Failure Of Identifying The Packet Id?

Sep 1, 2011

Ubuntu has been reporting a System error problem but when it try's send a report to your servers, it fails due to it's failure of identifying the packet id, i honestly have no idea of how to go about fixing this problem or even identifying the packet that's broken, please do help, as now my Apache server's not working properly, and a couple of other programs are getting affected by this, event installing and updating s an issue.

View 1 Replies View Related

General :: Identifying The Desktop Environment And Distro?

Jul 18, 2010

I'm looking for the best way to identify what distro the user is running and what the desktop environment is running. I'm building some pipeline tools for a visual effects studio and need some generic commands for passing paths to the user's file manager from within Maya and Nuke. The workstations I have access to are FC12 with xfce4 so for that I'd pass a system command :

Code: ("thunar "+$path)I've been identifying Fedora workstations with:

Code: # cat /etc/issue

Is there a command to identify what the current window manager is? Preferably something generic that'll work on the other distros as well.

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved