OpenSUSE Install :: Hal.dll Missing - Won't Boot Windows
Apr 25, 2011
I've seen a few other posts well over a year or 2 old about hal.dll missing, and windows not dual booting with grub, but all of those involved resizing or moving partitions. This install i just did of opensuse 11.4 only involved formatting over a Ubuntu partition which already ran and dual booted windows xp with no problem (no problems during ubuntu install) I am hesitant to try any previous fixes posted in the forums as my issue doesn't seem to have come about for the same reasons. I thought windows and linux were playing well these days, guess not.
i am having a problem with my dual boot setup. I originally installed windows XP on a 100gb hard drive, from there i downloaded and burnt ubuntu off so i could install it on my 200gb hard drive. For a little bit i struggled to even get it to install because it wouldn't recognize my onboard nvidia graphics, i ended up having to get an alt boot disk and fix it with technique in this link:
[URL]
Now after the bios boot, my screen shuts off for awhile and takes me directly to the login screen for ubuntu. No Grub, no windows boot options, nothing. I tried booting windows by choosing it from the bios boot menu but all it does is hang at prompt and doesn't boot at all. I tried the live cd fix and reinstalled grub but nothing changed. What i think is happening is that it boots the Grub menu but it doesn't display it because of graphical confrontations. It hangs for about 10 seconds, the grub default time, and then turns my monitor back on to display the Ubuntu login screen.
ere's my issue I've got an 80GB SATA drive and a 320GB IDE drive, I've already installed Windows 7 on the SATA drive. 80 is too small (in my opinion) to dual boot openSuse and Windows 7. Can someone explain me how to use a partition from the 320 IDE to install openSuse, and how to setup grub so I wouldn't have any problems booting to Windows?
I have installed openSuse 11.4 and works perfectly. The main problem is, I have another system on my HD, Windows XP, and unable to boot to my XP system. If I choose Windows on Grub menu, its just show me the same text as in the menu.lst at Windows' section. I am able to boot in Windows, by adding 'makeactive' but then, I unable to see the grub menu. And to boot to oS again, I must insert DVD installer and made an update. How tiring.
Most of the time when I install XEN on openSUSE 11.1 and SLES 11, the XEN kernel starts in a terminal rather than with X Windows. I have installed XEN during initial installation and with Yast after installation, both directly on the hardware and in Hyper-V. Does anyone know why this occurs?I don't have this problem with SLES 10. I am too frustrated to restart all the systems to provide exact details and hope this will be enough information. It is possible that it is related to the degree to which I performed online updates on the systems before installing XEN.
I'm running suse 11.3 gnome and it's running great but I need to boot into windows. I did have a windows partition on it but in my infinite wisdom a while back I tried to remove linux and thought I could just delete it.
I'm started getting a grub error 22 message and from reading forums it suggested fixing my mbr with windows recovery disk. I don't have that disk as it was pre-installed on my laptop. When I switch on my laptop listed is opensuse 11.3 and windows. When I click windows it tries to start fades and I get what looks like a blue screen with text but it's gone quickly.
Basically I can get into linux no problem but can't fix the windows partition. I wouldn't bother only college are insisting on a software which only runs on windows ArcGIS. Any suggestions to possible solutions or is it out to buy a new laptop?
I'm trying to install OpenSUSE on an external usb drive but when I boot from USB, all I get is a message saying "Missing Operating System". I've tried different ways of partitioning the drive either by letting OpenSUSE do it automatically or doing it myself. It's just a basic partitioning scheme, with swap on one partition sdb2 and the rest on root sdb1 .
I made sure to have GRUB be installed on the root partition of sdb (usb drive) instead of in the MBR (I've installed Fedora and Ubuntu on usb drives this way).
recently installed opensuse 11.2 from a dvd iso image i downloaded from the net over my existing dual-boot win7-ubuntu machine.i thought that there would be a triple-boot windows menu that will show windows7-ubuntu and opensuse in the windows boot menu and which would enable me to choose which os i want to choose from to start with....but when i installed opensuse 11.2 i saw that opensuse created its own bootmenu.i see five entries on the grub menupensuse-failsafe opensuse-windows1-windows2 and diskette.but when i choose windows 1 or windows 2 it windows 7 does not boot up instead the system asks me to insert a CD1 which i do not know what it is.And if i insert opensuse dvd it again tries to install opensuse.
As you can understand i am a pretty novice linux user i just used ubuntu for some time....Can you explain me how i can boot from windows7 and use windows7........You may laugh but i cannot even boot my windows7 and cannot use them...in opensuse when i look at the disk's contents i can see computer retains all the data but i cannot boot windows7
When I installed it, I used lvm to parition my hard drive and just let it do its thing. It shrunk my windows partition to 150 GB of 250 GB. I assumed it would let me dual boot just like ubuntu let me do but when I booted. It only gave me two options Desktop -- OpenSUSE 11.3 and failsafe -- opensuse 11.3. Those are also the two options it gives me when I look at the boot loader settings. Did I delete my Windows parition or did I just forget to specify to allow for a dual boot and how can i fix this so I can dual boot
i have a toshiba laptop running Windows 7 64 bit and i would like to install openSUSE 11.3 64 bit on it. I downloaded the DVD version and would like to know how i should do it.
My main os, albeit only because of gaming, is windows 7, and I was looking to dual boot with 11.3. I couldn't find any documentation of this, so here it goes: Does the executable on the 11.3 disk install opensuse like wubi does ubuntu?
I am trying to dual boot windows 7 and openSuse. I have shrunk my main partition and it is now unallocated. When running the DVD at the disc section I got the message Delete partition /dev/sda1 (199.00MB) This is my windows system partition (NTFS)
Delete windows partion /dev/sda2 (261.49GB) This is my main partition C: (NTFS) (Don't want to delete this Resize impossible due to inconsistent fs. Try checking fs under windows. Delete windows partition /dev/sda3 (16.31GB)This is my recovery partition.(NTFS) I also don't want to delete this. Resize impossible due to inconsistent fs. Try checking fs under windows. Delete partition /dev/sda4 (103.34MB) HP tools (FAT32) (Not sure about this, but would rather keep it.
Create swap volume /dev/sda1 (2.01GB) Create root volume /dev/sda2 (20GB with ext4) create volume /dev/sda3 (276.08GB for /home)
I also pressed created partition and clicked on the unallocated space but I got an error telling me that I either didn't have enough space or hadn't selected enough partitions. (The unallocated space was 20GB)
I have done my due diligence looking for some kind of USB recovery prog or "diskette" that I can get into recovery system or even just boot a xp cmd prompt so I can fix it from there. I have tried several different programs and none seem to work. Go figure. Anyone know of any recovery disks for windows xp that can be booted from a USB?
I have OpenSuse 11.4 running and I just installed Windows 7 in the same HDD on some extra space. Windows killed grub (I knew it would) so I put in my grub cd and selected "Detect any OS". It took a second and found my new windows installation along with my Opensuse (one option was single user mode, the other was just normal). When I selected the regular opensuse install, all I get is a nice looking terminal thingy with suse's logo in the background and I get a login prompt (command line login, no gui). So my first problem is that -- I can't get the GUI to work. Also, when I try to login at the prompt I get this error:Error in service module
In some spooky way I managed to install Mandriva and have windows in all its flavours in working order, however Suse is still a challenge too far. I have one partition to spare, divided it up into one main and one for swap and tried to get the installer to understand that one should be / and the other swap and that they had to be formatted to ext4. I think I succeeded in doing that. However, I then want to get a working bootloader with working entries for Windows AND Mandriva. The installer wants to know all kinds of stuff and I have no clue what to tell it in order to have a working bootloader or GRUB or whatever.
After shutting down linux the first time on suse 11.2 the grub loader won't show me the option to boot windows. I tried using wine and dosemulator to get to windows and it doesn't work because I don't know the file name to open windows.
Their are certain programs that I can only run in windows and I need windows open to install them.
Yesterday (Sept. 28) I managed to install openSuSE 11.3 on my Toshiba Satellite Pro C650 laptop, side-by-side with Windows 7 which was pre-installed. In brief I'd like to report the problems I had encountered up to yesterday.
1. Upon inserting the DVD and after the start of the installation the system would take me to non-GUI (Text) Mode and would finally respond with the message: "No repository found."
2. After that I tried to install openSuSE 11.2 and 11.1. There, although the installation went through smoothly, I had to deal with a new problem; when I selected to boot Windows 7 from the grub menu the system responded with the message:
rootnoverify (hd0,1) chainload +1 BOOTMGR is missing
Upon booting the computer from the DVD with the Linux OS and before I hit ENTER I changed the Kernel by hitting F5 (or whatever key corresponds to Kernel at the bottom of screen) to "Failsafe mode". That did the job. The installation started and ended smoothly. Oh! one other thing I did is to edit the preselected disk partition and delete the swap partition since the disk has to have four and not five partitions.After that, I became root and edited "/boot/grub/menu.lst" file to correct the "(hd0,1)" for the Windows 1 to "(hd0,0)" since it is the first OS.
I have decided to jump from windows to Opensuse and experince more of an Linux world. Windows always stores its boot detail in MBR similarly for Linux too but i have learnt that in many different installation of Linux that we can store in the first part of the Partition but trying out i have always failed to start, since the MBR fails to identify it. I have also tried EasyBCD and adding the link to Grub as the first partition but that too it din't work.
Question 1: i hate to writing multiple times on my MBR.
Question 2 Also let say due to some reason if i have to reinstall my windows the GRUB get lost. How can i restore back.
I was dual booting windows 7 with opensuse 11.3 and then realized I wasn't ever using Opensuse. I then deleted the partition it was in and now I cannot boot into windows. Grub immediately takes over upon booting but doesn't detect any partitions. I tried booting from an opensuse cd and changing the boot order priority, but grub still comes up. I don't have a windows 7 installation disc
I am having a very strange problem with GRUB: it refuses to boot from certain partitions, and in a very strange way. This is what I've noticed so far:When using GRUB in the default OpenSUSE 11.3 graphical interface and trying to boot it, GRUB almost always gives me Error Message 16: Inconsistent filesystem structure. The GRUB manual says that "This error is returned by the filesystem code to denote an internal error caused by the sanity checks of the filesystem structure on disk not matching what it expects. This is usually caused by a corrupt filesystem or bugs in the code handling it in GRUB. " I've ran fsck on all the partitions and neither of them has any corruption. When I switch to the non-graphical GRUB window, the message changes to Error Message 18: "Selected cylinder exceeds maximum supported by BIOS".
The GRUB manual says that "This error is returned when a read is attempted at a linear block address beyond the end of the BIOS translated area. This generally happens if your disk is larger than the BIOS can handle (512MB for (E)IDE disks on older machines or larger than 8GB in general). " However, I haven't touched any BIOS settings when the problem started to appear, and the BIOS is brand new anyway so it doesn't have such limits. When I try to boot directly from the command line, it roots to the boot partition just fine, but refuses to load the kernel, giving me the error 16 again.
When I try to boot Windows from the non-graphical GRUB list, it gives me the error 18 again, but it always succeeds when I do all the booting directly from the command line. One time I was able to boot Linux from the command line by using rootnoverify instead of root, but never again since then. One time it didn't boot Windows even from the OpenSUSE graphical interface, error 18 again. Sometimes it boots even Linux just fine, but it happens quite rarely now. The problems started appearing just recently, and without any reason that I could think of. I also ran setup again in order to reinstall GRUB, and it worked for one boot, but not any more...
My partition list is like this: (hd0,0) Windows 7 boot, NTFS, primary (hd0,1) Windows 7, NTFS, primary (hd0,2) Windows XP, NTFS, primary (hd0,3) Extended (hd0,4) /root, EXT3, logical (hd0,5) /home, EXT3, logical (hd0,6) swap, logical (hd0,7) /boot, EXT2, logical
I am very much excited to try out openSUSE 11.3.. But i am very much afraid of losing my data in windows partitions without knowing the exact procedure to install it..here are my existing partition list... Please have a look at it and suggest me..
c : 40 GB d: 120 GB e: 140 GB f: 140 GB
and i have some free space of 28 GB.It is unallocated.I want to install openSUSE into this free space.Now please tell me whether i can proceed with the default disk configurations given at the install time or do i have to modify and adjust the partitions or do i have to create partitions for the available free space.
I'm doing some research for a friend who wants to dual boot Windows 7 with a Linux Distro that has Perl inbuilt & also supports .MP3 and other popular codecs "out of the box"
From my limited research, OpenSUSE seems to fit the bill (as does Mandriva Powerpack).
Also, how easy is it to create a dual-boot with Windows 7 with this distro?
i have openSUSE 11.3 as my primary OS. and i want to be able to dual boot windows vista. from what i read i would have to reinstall the 11.3 to set up to dual boot. i may have that wrong.
recently I've installed Opensuse 11.4 dual booting beside windows 7 . now I want to restore windows 7 boot to remove OpenSuse 11.4 ...I've tried many ways to remove grub and restore window's boot . I tried bootrec /fixmbr and bootrec /fixboot but in when it comes to the last step it says (cannot find system path )I also tried nt60sys method to restore windows boot and it failed 2 sound like the grub installed is rock solid one
ok basically i have 2 hard disks one Seagate 500GB Sata, and one Western digital SATA my windows 7 is on the western digital and i think thats sda1, and opensuse is on the seagate the grub loader is on the western digital, and earlier today everything booted fine, till i went to boot windows
i had 2 "other" options, i selected the first one and it failed, the second other booted to windows, after about 3 hours on windows and doing nothing. i went to reboot and go to opensuse, and got a "grub loading stage 1.5., please wait" and it loads forever and nothing happens, it just idles im currently on the livecd just to get an operating system to use to get the net
I tried a lot of distros and the one who i liked was openSUSE, I really liked it! And now I want to install openSUSE in my PC, but, there's two problems.
1- I need to keep Windows Vista, because i am the only onein my house who knows how to use a linux (at least, use a little bit, hehe). 2- I don't know how to make a dual boot with Vista and openSUSE.
I want a tutorial showing me how to make the Dual Boot (Windows Vista x openSUSE), and, if possible, with screenshots.
