OpenSUSE Network :: How To Setup 2 Pppoe Connections

Jul 13, 2010

My server SUSE 10.2. I am already working with one pppoe connection, I need to configure the second on the same server? How I do this?

View 2 Replies


ADVERTISEMENT

OpenSUSE Hardware :: How To Setup 2 Pppoe Connections

Jul 13, 2010

My server SUSE 10.2. I am already working with one pppoe connection, I need to configure the second on the same server? How I do this? This forum has no such message....

View 3 Replies View Related

General :: Network Connections Gateway Setup Says 0.0.0.0

Feb 23, 2010

After editing my network connections gateway setup as 192.168.1.1 I get back 0.0.0.0 after I run nm-tool. I'm using Ubuntu ver 9.04 setup on my VMware server.

View 1 Replies View Related

Fedora Networking :: F11 - Routing Two PPPOE Connections

May 24, 2009

On a Fedora 11 machine, I configured ppp0 on eth0 and ppp1 on eth1, each one is connected to a modem, I also defined ppp0 as the default gateway.. Should I do anything else to load balance the 2 connections or will ppp1 take some of the load by default? Should I add any other routing rules? If yes then please tell me what should I add, keeping in mind that for each pppoe connection both the pppoe address and the remote address are not static so I actually needed some scripting to change the default gateway each time the remote pppoe address changes.

View 4 Replies View Related

OpenSUSE Network :: How To Configure A Pppoe Connection

Jun 26, 2010

I would like to know how to configure a pppoe connexion? I am testing version 11.2 on live cd but I can't manage to connect my laptop. I used the "green plug software", I filled all the blanks (I am not a total beginner because I have been using Mandriva for a year) but afterwards I can't select pppoe instead of eth0 What should I do?

I read on this forum NET INSTALL PPPOE - Alionet, communaut francophone d'entraide openSUSE et SUSE Linux that the only reason that I can't configure a pppoe connexion is because I am using a live version of 11.2 as result that it only recognizes an ethernet connexion and a modem (everything I said, is said in the forum I linked, but you'll have to read it in french )

I try to configure a pppoe connexion to Tl2, my internet connexion provider. I live in France. My modem is a Bewan ADSL ethernet 100, no need to configure it.

View 2 Replies View Related

OpenSUSE Network :: PPPoE On Minimal Server Installation?

Jul 12, 2010

I have minimal server installation suse 11.2 and i m trying to configure PPPoE through terminal windows but without any luck. I have DHCP activated on mine network card eth0. Mine gateway is mikrotik router board its working fine. I get an ip adres regular from dhcp server. Did someone do something like this.. does not have to be mikrotik as gateway just step by step configuration through terminal window cos i have minimal server installation... I dont use GUI cos its a web testing server on network

View 2 Replies View Related

OpenSUSE Network :: Reconnect A Pppoe Internet Connection?

Dec 31, 2010

I have a ppoe internet connection. I was easier and faster to configure it in Yast than in Windows XP. When
The provider here sometimes goes through some problems and the connection may disappear and return at any unexpected moment. In Windows there is a icon on system tray that dysplays such information and I know when the connection is gone. It also allows me to try to reconnect manually. Where do I find these information on Opensuse here do I manage to reconnect. In Windows it was also possible to set the connection to re-dial automatically when it was out. It was very useful if it failed in the middle of a download, the system reconnected and the download manager retried until download resumed. Is there some way to adjust opensuse to reconnect automatically when connection fails or some software that does it? Furthermore, is there a good download manager that works in Opensuse that pause, accelerates downloads and retries when connection fails?

View 3 Replies View Related

OpenSUSE Network :: PPPoE - Cannot Access LAN And Internet Simultaneously

Feb 7, 2011

I need to implement at my sister this kind of connection: She is connected on Local area network that has about 50-80 pc's, but for internet access she must start an pppoe connection. For now when she wants to use lan she must put her local address (ps: they dont have dhcp), for pppoe she uses dhcp. Problem is that on that way she can't access lan and internet at the same time. She must disconnect from lan and then start pppoe connection and vice versa. I'm intrested if it is possible to have lan access at the same time as internet access. some kind of tunel through lan up to isp. I was googling little and so PPPoE tunneling. Is it that what I need here?

View 9 Replies View Related

OpenSUSE Network :: Pppoe - Stuck And Doesn't Connect To Eth0

Jun 30, 2010

i'm using opensuse 11.3 and can't connect to the internet, my eth0 interface (which would be my modem i suppose) is found and when i "activate" it with ifup eth0, it gets stuck waiting for data (says so in ifstatus). If i try with knetworkmanager it is also stuck and doesn't connect to eth0. If i try to make it connect at boot, it doesn't work either.

I think the problem might be that in windows xp my modem has a "limited connection" but i can connect with my pppoe password anyway, but opensuse won't let me connect until it finds eth0 is working correctly which it never will because of how the internet company configures the modems i think. I don't know with which command i could "force" the pppoe connection even without a good connection to the modem, maybe that would work. But on the other hand, with other distros i can connect just fine so i don't know really.

View 1 Replies View Related

OpenSUSE Network :: Create A Gateway Server That Allows Virtual Private Network Connections?

Feb 26, 2010

I have openSUSE 11.2 installed and i need to create a gateway server that allows virtual private network connections. I want to play with my friends some lan games, but we are in different networks, so i want to create this gateway server so we can connect with VPN clients to this server and play freely.

View 7 Replies View Related

OpenSUSE Network :: Permanently Enable X Connections From All Machines On Local Network?

Jan 13, 2010

Does anyone know how to permanently enable X connections from all machines on my local network. I keep having to enter 'xhost +' to allow X connections.

View 2 Replies View Related

OpenSUSE Network :: No Internet After Install Of 11.4 Network Connections Fine

Mar 12, 2011

I have no Internet Access with Firefox

I first tried an upgrade from 11.3 to 11.4 and lost Internet Access, so i re-loaded 11.4 from scratch on clean partitions.

I am connected to my wireless WPA2/PSK connection, have an IP, am able to see the network.

I turned off and disabled the SUSE firewall.

I tried setting Firefox proxy settings to auto and to none, i dont use proxy.

I am currently posting this through an SSH connection to my 11.1 server from the new install of 11.4 on a Dell latitude D600 laptop (not using the on-board Broadcomm that is an issue for a later date).

I am running out of ideas anyone got a clue.

View 9 Replies View Related

OpenSUSE Network :: Make Network Connections Persistent When Using NetworkManager ?

Mar 31, 2011

I had a google of this but can't find anything useful. I use networkmanager to configure my wireless card. Currently this only works when I'm logged in to KDE. If I log out the system loses the network connection. Is there a way to make it persistent using NetworkManager?

View 9 Replies View Related

OpenSUSE Network :: Network Connections Didn't Have Connection

Jan 14, 2011

I just finished a fresh install of 11.3 on an HP 7900 small form factor and have no network connectivity. In Network Tools eth0 shows the state as inactive. Network Connections didn't have a connection, so after letting it create one there is no MAC address. I copied and pasted the MAC address from Network Connections eth0, set up a static address with default gateway, netmask, etc. all set appropriately and rebooted. Still no joy.

I want this to get an address via DHCP, I just set up a static address for testing.11.2 sensed the NIC without issue, but 11.3 doesn't seem to like me right now.I wanted to get this deployed on 40 machines today. Oh well.

View 2 Replies View Related

OpenSUSE Network :: Get Network Manager To Manage Those Connections?

Mar 19, 2011

network manager isnt showing any network interfaces. ifconfig shows wlan0 and eth0 and internet is working. how can i get network manager to manage those connections?

View 8 Replies View Related

OpenSUSE Network :: Network Connections Don't Show NIC's Last Date Used

Mar 21, 2011

I remember when using openSUSE 11.3 with KDE 4.5, the network connections started to show the last date used for my "NIC".I am using the plasmoid-networkmanagement plasmoid and KNemo.After I downloaded and installed openSUSE 11.4 64-bit, the network connection no longer shows the last date used. I have set up my card via Yast and Iam connected directly to the Internet. No proxy.To find where this is located, navigate to:Configure Desktop --> Network Settings --> Network Connections --> Wired tab.

View 2 Replies View Related

OpenSUSE Network :: Network Connections All Grey Except For VPN

May 3, 2011

First a warning that I'm so clueless it hurts. Initially I entered the Linux world as a solution to my blue screening Alienware Aurora desktop (which later fried anyway ironically enough). I decided to give up on Windows for everyday use cause you can't strangle an operating system. My first and there after Linux experiences have been fantastic. Internet works without prompting through various distributions of Ubuntu, Mint, and KDE with the exception of enlightenment.

But now I come to openSUSE 11.4 and as my title suggests I'm having a hard time connecting to the internet. I've got a wireless card and router and all that jazz but I can't even select the options for wired or wireless connections under Network Connections in the Network Management Settings. Everything is greyed out except for VPN. I even have the desktop wired to the router and it still is not giving me any indication that it will connect.

I'm wary of trying to enter ip addresses and things of the like because I honestly don't know what i'm doing here.

My router is a Netgear N150 Wireless WNR1000 and in the Kinfocenter under Device Viewer I found my wireless card to be a RaLink RT2561/RT61 802.11 g PCI and my wired device thingy to be an Intel 82540EM Gigabit Ethernet Controller.

View 3 Replies View Related

Fedora Installation :: Network Connections Is Inactive - Cannot Set Internet Connections

May 30, 2011

I recently installed Fedora 15 now, and during installation I set the internet connection manually, then did update and after reboot, the internet connection settings have been removed. Now I can not set because the network connection to the Internet Connection is inactive. I mention that before the update was functional internet connection.

View 5 Replies View Related

Ubuntu :: How To Setup PPPoE Connection

Jan 20, 2011

I have this strange problem. I can't setup my PPPoE connection through the kPPPoE. My ISP told me that this PPPoE has something like name server or something like that and i must use some other package to connect.

View 3 Replies View Related

General :: Setup PPPoE On Ubuntu?

Dec 1, 2010

how to setup PPPoE on ubuntu or even fedora which requires only username and pass to login.

as for pppoeconf.. it gives me error some modconf not found.

I currently have 10.04 installed and would like to update it after getting the internet working .

I won't be able to connect to internet in ubuntu so don't tell me methods which will require me to access internet IN ubuntu. If some downloading from windows is required it's good.

View 3 Replies View Related

OpenSUSE Network :: 11.2 Xen Bridged Networking - Setup Multiple DomU Through The Default Bridge Setup

Feb 4, 2010

Im trying to setup multiple domU through the default bridge setup. I am able to access only one of them through the network at a time. If you ping one of the domU it works perfectly but you cannot ping any of the others until you stop pinging the one and even then it takes a bit before you can. Ive looked around for a while and seen similar problems but nothing ever seems quite the same. Im probably missing something really stupid. Or is this the way the bridge is supposed to behave? Do i need to use a routed virtual network?

[Code]....

View 1 Replies View Related

Ubuntu Networking :: Setup A PPPOE Connection On 10.04?

Apr 29, 2010

I've just done a fresh install of Ubuntu 10.04 lucid lynx and how to setup a pppoe connection in ubuntu. ( thats after 2 hours of googling and trial and error)

system info: its a laptop : Dell Studio XPS 16 connected to a Ethernet hub thats connected to a dsl modem..

View 6 Replies View Related

CentOS 5 Networking :: How To Setup A PPPoE Server

Jan 5, 2011

I would like to set up a PPPoE server based on CentOS 5.5 i386, in order to give public IP addresses to my customers. Does have anyone a tutorial or can you give me some clues ?

View 1 Replies View Related

OpenSUSE Network :: Disable IPv6 On All Connections?

Jun 18, 2010

does opensuse 11.2 come with IPv6 enabled by default? where in the gnome gui can i access these settings?

Edit-i went into the gnome network manager applet and i cant find any IPv6 settings for any of my used connections-ethernet, wireless and VPN connections all seem to only IPv4. Can anyone else confirm that opensuse 11.2 uses only IPv4 on its network connections?

View 9 Replies View Related

OpenSUSE Network :: Using WiFi And Ethernet Connections

Feb 5, 2011

I've been searching for a couple of hours and have not found any threads that solve my situation... hope I'm not repeating something here.

Setup: Notebook with openSUSE 11.2 using KDE 4. Using Network Manager to manage network connection (although I've tried configuring this using ifup as well with no luck).

I need to be able to connect to client networks via a network cable (Ethernet) and connect to the internet via my MiFi 2200 Mobile WiFi. Both cards/connections are active with the following:

I have no problem mounting drives from the client's network. But, can not reach the internet. If I disconnect the ethernet cable, the browser will immediately connect to the internet and load web pages.

I'm assuming the ethernet connection is taking precedence over the wireless connection?

I can't imagine that there is not a way to set this up. If Windows can do it, I'm sure openSUSE can!

View 9 Replies View Related

OpenSUSE Network :: Command That Blocks All Connections?

Jul 16, 2011

Just wonder is there any command that blocks all connections?

I am aware about RedHat #sudo /sbin/services iptables panic

and wonder is there something with similar effect in opensuse?

View 5 Replies View Related

Ubuntu Networking :: How To Setup PPPOE Connection Over Wireless

Apr 22, 2010

My adsl modem is in bridge mode. I can connect to internet via pppoe . pppoeconf recognise the pppoe in eth0 and setup a connection and I can use it. How can I setup a pppoe connection using pppoeconf so that it uses wireless ? I set the wireless mode to bridge in modem settings. But, after that the access point stopped appearing in "aps in range" in network manager and I can't connect to it. pppoeconf also doesn't recognise wlan0 as a valid pppoe link . but dat is normal since i don't think it can check if wlan0 is pppoe without wlan0 being connected to the modem's wireless network. How can I connect to Internet with modem in bridge mode and connections via wireless interface of modem? Is pppoe over wireless even possible ? coz the datalink layer of wlan is not ethernet rite?

View 6 Replies View Related

OpenSUSE Network :: Router With 2 DSL Connections Not Port Forwarding?

Apr 26, 2010

I'm running suse 11.1 which is configured as a router. Configured are two DSL connections with static IP's and one LAN connection (3 NIC's all together).

Problem: suse firewall will only port forward connections from one of the DSL connections and not the other.

Because I'm running two DSL connections is there something special I have to turn on/enable on the firewall?

View 1 Replies View Related

OpenSUSE Network :: Monitoring Incoming And Outgoing Connections?

May 19, 2010

My question is simple - is there any linux app or applet which is able to show (monitor) incoming and outgoing connections assuming it's a direct internet access? I was using a firewall on a system off Redmont which was able to show every connection, listening ports of services if some were opened etc.

View 1 Replies View Related

OpenSUSE Network :: SuSEfirewall Blocking All Connections Tunnelled Over Ssh

Sep 14, 2010

My home computer has 11.3 and SuSEfirewall enabled. It connects to the net over the wireless and SuSEfirewall has this connection in the external zone.

I can successfully ssh into this computer from remote (the work computer) but none of the ssh port-forwarded connections work. I'm trying to tunnel VNC over ssh. I also tried setting http on the home computer to serve pages on a high-numbered port (8090) and tunnelling that but it also didn't work - proving that it's not a VNC problem.

Here are the relevant messages from the firewall logs on the home machine:

Code:

I don't understand why this isn't working now, I had the same setup on 11.2 and it worked fine.

The 95.91.92.92 is the public IP address of my home router, I don't understand why a connection would appear to be coming from there when I use ssh-tunnelling?

View 5 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved