After installation and deinstallation of XEN the main topic "Virtualization" is missing in the YAST control center.
Under "Software Management" I searched for "yast" but found no fitting module.
How can I reinstall?
I'm having trouble with Yast, I noticed today that I can't open the control centre from the desktop (along with install/remove software) when opening from the command line I get. the following output:
** (y2controlcenter-gnome:9050): WARNING **: error accessing /desktop/gnome/lockdown/disable_command_line [Failed to contact configuration server; some possible causes are that you need to enable TCP/IP networking for ORBit, or you have stale NFS locks due to a system crash. See GConf configuration system for information. (Details - 1: Failed to get connection to session: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.)]
Yast2 control centre opens, but none of the options load when selected. I have tried updating everything through Zypper which didn't work. (aka zypper ref/up etc). Then I tried removing yast and installing it again. When I did this (and downloaded the Yast control centre again the above errors, reappeared.
I recently upgraded my SuSE 11.2 to KDE4.4 from "download.opensuse.org/repositories/KDE:/KDE4:/Factory:/Desktop/openSUSE_11.2/". Most things run fine, however the "Akonadi Control Center" does not appear in my KDE "System Settings". Akonadi itself seems to run, at least Contact uses it for the addresses.
I searched for all "akonadi" packages, but I didn't find ones which I do not have installed.
I installed OpenSuse 11.4 Gnome on my Toshiba laptop. A couple of things i noticed while trying the live CD first is that the file manager recognized my NTFS partitions and after I installed I expected it to do the same. Also, while installing I thought I selected a secure logon with username & password. After installation it boots right into the desktop GUI. I haven't had a lot of time playing with OpenSuse yet and I have browsed through some threads and I couldn't find a way to configure a secure logon and do I have to mount the Windows partitions in the Command Line or is there a tool I can use in the control center?
View 7 Replies View RelatedAs a Fan of openSuSE on the Desktop i'm about to create the version 2.0 of our local LUGS munotLinux distribution which should be localized for switzerland and contain a lot of additional software.
For this case I tried to modify the control.xml file in the root image for yast to hide the dialogs for language/keyboard layout, location and deskop choice (it will be a kde based distro). I can set the language, keyboard and location defaults correctly, but I couldn't get any success in disabling the regarding dialogs yet. And after all googeling and reading the available documentation I can't find a hint about the correct way to modify the control.xml this way.
something odd I've noticed with 11.3 on my laptop--if I adjust my resolution through the Monitor applet in the Control Center or if I make changes to my Touchpad settings through the Control Center, the changes are lost when I log into my laptop. Do you think I botched an installation?
I've tried to determine what actual files are affected via the two applets with the thought that maybe I don't have the necessary permissions on them or that I can throw a bandaid on it with a start-up task to overwrite them. Alas, I've got nuthin'
Yesterday, after I first installed Slackware 13.1 I had no trouble replacing the default wallpaper with a simple gradient. Very easy. Today, (after re-formatting the drive and re-installing the entire system because I messed around with a script and it wouldn't boot) I can't change it. I spent about an hour messing around with menus and settings trying to figure out how I did it, and eventually, as a last resort, turned to the help file. It tells me to choose Configure Desktop from pop-up menu when right-click on the background.
But Configure Desktop doesn't appear in the pop-up menu. (At least, not anymore it doesn't.) The help file also says to use the Control Center, but I can't find any trace of that either. I haven't the slightest idea why these are missing. Since I re-installed everything onto a freshly re-formatted drive, anything I played around with before shouldn't have any effect on the new installation. The problem is there both when I login as root and user. I really don't want to try re-installing everything again.
The only changes I've made to the system since the re-install is to edit /etc/inittab to replace the 3 in id:3:initdefault: with a 4, so I get a graphical login, and to edit /etc/rc.d/rc.inet1 to place an & at the end of the dhcpcd request which, according to the instructions I was following should put it in the background to speed up boot-time slightly. I haven't (knowingly) played around with anything that should affect KDE, except changing settings from within the KDE menus. I know it's probably going to be something very simple, and possibly obvious in retrospect, but I'm new to Linux and have no idea what I'm doing here.
I've got a fresh install of 11.3 on a x64 machine. I've managed to work through most of the initial hiccups and get a smooth system.However I've noticed that the 'System Logs' option in YAST is missing. Has anyone else noticed this? Is there some supplimental package that I should install? If it was removed from 11.3, is there an easy way to find and read these logs?
View 7 Replies View Relatedwhy is there two different buttons to do the same job? i made the default sound device creative x-fi with the kmix in the right hand corner but i still couldnt hear any sound. i then found out from another forum thread in this forum that to change the default sound device you have to go through yast. it works now but it is confusing. same for networking. network manager is installed by default in 11.4 but if you click on the icon in kde tray it says no network interfaces found. you then have to go to yast,network and click the radio box for network manager then click on ok. i hope in future releases of opensuse there will be one way to change the defaults.
View 2 Replies View RelatedAbout a week ago, I installed all the updates that popped up. I didn't actually look at what was being installed.
Since then, most of the items in the Yast2 Control centre won't run and just pop up an error box with the following (Firewall):
terminate called after throwing an instance of 'std::logic_error'
what(): basic_string::_S_construct NULL not valid
YaST got signal 6 at YCP file /usr/share/YaST2/clients/firewall.ycp:20
/sbin/yast2: line 440: 19436 Aborted $ybindir/y2base $module "$@" "$SELECTED_GUI" $Y2_GEOMETRY $Y2UI_ARGS
Xlib: extension "RANDR" missing on display "::ffff:127.0.0.1:11.0".
[Code]....
This is the error message I got today when updating.
patch:yast2-control-center-4200.noarch conflicts with yast2-control-center-qt.i586 < 2.20.2-1.3.1 provided by yast2-control-center-qt-2.19.3-6.1.i586
I am a newbie of KDE desktop. Where can I find the functions of control center of Gnome in KDE desktop? For example, the "Remote Desktop Preference"
View 6 Replies View RelatedWhen I try to adjust the mouse and keyboard parameters, changes aren't applied. I adjust them to were I want to, click on accept, but then when I look on the settings again, they are set to default again. This must be some kind of bug. I already updated using the LXDE repository.
View 9 Replies View RelatedI have 2 identical hardware systems running 11.2.I swapped over the DVB card. In the second system is the TV icon in yast missing.Looked at hardware....the card is known.Any idea how to configure yast so it shows the TV icon?
View 2 Replies View RelatedThere are lots of technologies which are used for virtuaizing such as OpenVZ, Xen, VMWare, KVM.
I tried all except KVM. Is there any web gui control pane which can be used for KVM virtualization ?
Like, HyperVM is used for openvz and xen, vmware have their own control panel web gui
I just had to do a reinstall of 11.3 when plasma refused to run. Now I'm noticing that applications are missing from (pacman) repo, but when I browse the repo with firefox, the rpms are there, they're just not being found by a yast search... Both mplayer and kdelnive are not found by yast. There are probably others...
View 5 Replies View RelatedFresh install of OpenSUSE 11.2 and I'm having issues with sound. Installed what I needed for various codecs (mp3, dvd etc etc). Sound now plays through applications yet when I go to Control Center and try to adjust the Sounds, I get a dialog box that says "Waiting for Sound System to Respond" and it just hangs there.
This is an old Shuttle box with Nvidia onboard everything. I've selected all pulse and alsa packages and did a reinstall on them to no avail.
Not sure how/when/why it happened the volume control app on my control panel is missing. I tried adding it by doing a "Add to Panel" but the volume control app says it is now deprecated.Is there any other way to change the volume quickly instead of having
to open pulseaudio volume control
I just installed Ubuntu amd64 10.04 on my Gateway LT3114u Netbook. The video card on this device is ATI Radeon� X1270. For some reason the automatic driver installed by Ubuntu is not working perfectly, I noticed that because: When the "Appearance Preferences" - "Visual Effects" are set to "Normal" or "Extra", some very weird lines and images apear, and I can�t read any word as the characters are messy. But if this setting is "None", the system works just fine!
Also, I tried to install the ATI driver and the "ATI Catalyst Control Center" and when I try to run it, it says the ATI driver is not working ok. Any tips on how to solve it? Please consider Im a begginer for Ubuntu.
I have been using YaST to install software. It has been working probably. But yesterday when I want to use it again. I can goto that SUI (blue screen) but I just can't go into the software management. and then I try the other options. None of them can't be used.
View 9 Replies View RelatedWhere is Gnome Control Center. I checked System, Preferences but it is not there
View 1 Replies View RelatedI tried adding sample programs to the Control Center by adding them to the Preferences/Administration menu, but that doesn't work. I'm using Lucid Lynx.
View 1 Replies View RelatedI know that you can have a nice control center if you have nvidia or ati drivers installed. Is there such a thing for intel graphics (Intel GMA or HD graphics)?
View 2 Replies View RelatedToday is my sort of third day with the OS and I'm still loving it. I've been able to get the hang of quite a few things in Maverick but there is one thing that I really need help with.Back in Win7, I had the very same situation and after a week of messing around I was able to get it working; it was sheer luck, but hey, who cares?
I'm running an ASUS M4A785-M motherboard with an integrated ATI 4200 video card and using a 32" Toshiba TV with HDMI video and sound, which Ubuntu was kind enough to download the proper drivers for all on its own; Win7 didn't. Problem is, the best resolution I can use is 1920x1080, but at that point some of the text looks just too small, so I use the 1776x1000 resolution instead. Still, the grand majority of websites don't fill the browser. I have to manually zoom in each time so they can look properly. I know that after a week of tinkering in Win7 I got it working just fine without the need to zoom in on pages. I can't remember for the life of me how I did it and I had accidentally formatted the entire HDD once and all those settings got lost.Lower resolutions make it worse too. On some of them, the actual computer window won't even fill the TV unless I change certain settings, and then it still looks horrible because everything gets stretched out sideways and gets squashed and even if the PC screen doesn't fill the whole tv, it overcasts itself in the middle; as if I was using a much smaller monitor and it was overcasting.
when running XFCE, changing the font in qtconfig fails to change fonts in KDE apps such as ktorrent and koffice. This is rather annoying because default KDE fonts are excessively large and blurry on my monitor. Is there any way to force KDE apps to obey qtconfig settings?
View 2 Replies View RelatedFrom a fresh install of OpenSuse 11.2 64 bit the default is KDE. But if you want to install both KDE and Gnome on the same machine. I got to Yast --> Patterns --> And tick Gnome Desktop Environment and Gnome Base System.
That inturn pops up with a dependency issue. That states the following:
#### YaST2 conflicts list - generated 2010-02-24 13:18:37 ####
pattern:gnome-11.2-20.22.1.x86_64 requires patterns-openSUSE-gnome, but this requirement cannot be provided
uninstallable providers: patterns-openSUSE-gnome-11.3-1.1.1.i586[http-download.opensuse.org-ae9db630]
patterns-openSUSE-gnome-11.3-1.1.1.x86_64[http-download.opensuse.org-ae9db630]
patterns-openSUSE-gnome-11.2-20.22.1.x86_64[openSUSE 11.2-0]
patterns-openSUSE-gnome-11.2-20.22.1.i586[repo-oss]
patterns-openSUSE-gnome-11.2-20.22.1.x86_64[repo-oss]
[ ] do not install pattern:gnome-11.2-20.22.1.x86_64
[ ] break gnome by ignoring some of its dependencies
[x] deinstallation of patterns-openSUSE-kde4_pure-11.3-1.1.1.x86_64
#### YaST2 conflicts list END ###
So my question is what exactly does removing and applying the Gnome pattern do. Because it seems to change alot more than just branding. It changes the default environment to GTK. How would go about reverting the pattern back to KDE after the install of all the correct Gnome Dependencies.
I can get the installation history via the command line:
Code:
rpm -qa --last | less
Is it not possible to get it from YaST in the same way as you can in Synaptic? It would not only be nice to see a basic list, but also what has been pulled in as dependencies and have it grouped by 'installation sets'. Too much to ask?
I don't know why this is happening, however, all of a sudden I am unable to install any packages (from OpenSUSE repos of course) using either Zypper from the CLI or YaST2. Every time I try and install anything, or perfom a zypper dup, I am greeted with the below error message.
Code:
error: error(-30987) getting "" records from Requireversion index
error: db3 error(-30987) from dbcursor->c_get: DB_PAGE_NOTFOUND: Requested page not found
error: error(-30987) getting "" records from Requireversion index
error: db3 error(-30987) from dbcursor->c_get: DB_PAGE_NOTFOUND: Requested page not found
error: error(-30987) getting "" records from Requireversion index
error: db3 error(-30987) from dbcursor->c_get: DB_PAGE_NOTFOUND: Requested page not found
error: error(-30987) getting "" records from Requireversion index
error: db3 error(-30987) from dbcursor->c_get: DB_PAGE_NOTFOUND: Requested page not found
error: error(-30987) getting "" records from Requireversion index
error: db3 error(-30987) from dbcursor->c_get: DB_PAGE_NOTFOUND: Requested page not found
error: error(-30987) getting "" records from Requireversion index
error: db3 error(-30987) from dbcursor->c_get: DB_PAGE_NOTFOUND: Requested page not found
error: error(-30987) getting "" records from Requireversion index
error: db3 error(-30987) from dbcursor->c_get: DB_PAGE_NOTFOUND: Requested page not found
error: error(-30987) getting "" records from Requireversion index
I'm no stranger to OpenSUSE's package manager, however I have yet to come across this error before.
when in command line (because i cannot start plasma either) i get an error message stating [/usr/lib/YaST2/bin/y2base: symbol lookup error: /usr/lib64/libstdc++.so.6:undefined symbol: _ZNst_num_getIcSt19istreambuf_iteratorIcSt11char_traitsIcEEE2idE, version GLIBCXX_3.4] i would like to know how bad it is and if it can possibly can be fixed
View 9 Replies View RelatedAnyone know what happened to the nvidia repos and are they going to come back up?
Can't access it through yast, ftp, or a web browser.