Fedora Installation :: Unable To Install F12 X64 From Boot.iso Over PPPoE / Enable It?
Jan 5, 2010
I want to install F12 x64 from boot.iso.
My ISP give Internet connection only by PPPoE. A problem is next.
After partitions creation installation offer me connection from eth0 device - I need ppp0 device.
Is any way to create ppp0 device, configure PPPoE connection during installation from boot.iso?
May be it is anywhere documentatons create your own boot.iso with added PPPoE ?
I don't want download full DVD F12 or LiveCD.
View 2 Replies
ADVERTISEMENT
Jan 9, 2010
I have a Dell Inspiron 1525 and I've been trying to boot into the live mode. I can get into the main 'Try Ubuntu without any changes' menu, but selecting that option causes the CD tray to spin up, followed by the head audibly flailing about for a minute or two causing the laptop to noticeably vibrate, followed by nothing. It doesn't boot or give any errors, it just stops. I can read the discs just fine in Windows.
So far I've tested shipit CDs of 9.10, 9.04 and 8.10. All cause the above problem. 8.04 works perfectly.
View 6 Replies
View Related
May 6, 2011
Today morning I was upgrading ubuntu 10.10 to 11.04. When the packages were downloading it was showing 20m left to download. At that time I had a battery of 2 hrs. As I had to go so I left my laptop on and went( the charger unplugged ). When I came back I get the following message code...
I had Widows 7 also. Thank god its fine so that I am able to ask question.
View 5 Replies
View Related
Jan 17, 2009
Just installed a fresh copy of F10. After install, when I boot It goes through a screen where it shows 3 bars loading. Once the last bar (white) is finished, and fedora 10 becomes white, nothing happens. If i press any key, it will give me a msg saying something along the lines of "reading contents of drive vol000 this make take a while". I rebooted after 2 hours. When i came back, I waited 8 hours.
View 4 Replies
View Related
Feb 18, 2010
I have recently adquired a Dell Inspiron laptop with Intel Core 2 processor and Windows 7 Home Basic Edition (64 bits) installed. Since I need for working linux I have performed a reduction of the main partition of Windows leaving free a 20 GB of hard drive. With an Ubuntu 9.04 Desktop version (64 bits) I have installed then Ubuntu linux in the empty space mentioned now then having a dual boot laptop (I have done this before with other computers, I knew how to do it so to make it work). All went well and both OS works fine. I have installed a lot of packs without any problem, when I installed thunderbird pack I notice that its version is 2.0. I didn`t think that was a problem until I wanted to install some addons and thunderbird complaints that those addons only work with versions superior to 3.0. " Ok" I said to myself, and looked here code...
View 2 Replies
View Related
Mar 26, 2010
I am trying to install *.tar.gz on linux
I am getting error like this
bash: ./configure: No such file or directory
View 2 Replies
View Related
Dec 30, 2010
I have a very big problem here. First a little background information. I tried searching this forum but didn't find anyone with similar situation.
I have installed Ubuntu and it's variations many, many times on different computers, and once in my current desktop PC. Right now I am in a situation where I want to install Ubuntu 10.04.01 (or any version, really) but I cannot.
I have tried to install both 32-bit and 64-bit versions, I have tried Ubuntu 10.04.1 and 10.10, I have tried to install with Wubi (currently running Windows 7 64bit), I have tried to burn the images to CD and created an USB installer, nothing works, it's always the same. Installer starts, I put in "Install Ubuntu", and the screen goes blank. Nothing but a white little cursor blinking in upper left corner of screen. And I cannot type in anything.
Previously I had Ubuntu 10.04 installed with Wubi, and it worked. Right now, nothing works. Anything helpful appreciated. I can provide some system info if needed.
View 5 Replies
View Related
May 3, 2011
Ok so recently a friend recommended I try Ubuntu. So I downloaded and ripped 11.04. Reset PC went to install and got to about 95% then got an error that said "Unable to Install GRUB in /dev/sda" then downloaded 10.04 LTS and got same issue along with 10.01 (friends disc) and same issue. I have tried both 64 and 32bit, have tried iso and usb. I was able to install it on an older machine of mine and enjoying it. But I really want it on my main machine. Here are the specs of my main.
MOBO = X58 SATA 6Gb/s USB 3.0 ATX Intel Motherboard code...
Number 8 and 9 are the issue and choices after words. I am unable to select any choice on step nine. when i hit OK it wont do anything.
I hope this is all enough info and would love any help that is given. My friend who is an Ubuntu user is throwing his hands in the air at this point lol.
While doing research I found a few ppl with similar issues. And one person said when he made his own /root and /home partitions it worked. I get similar issue even if I take those steps.
Ive collected as much info for you guys as I can think of if you need more info plz let me know.
View 4 Replies
View Related
Jun 1, 2011
Code...
Here are the messages appears on terminal. I can reach those URLs by browser and manually download them. But when I try to install them on terminal or via package managers, simply my attempt fails.. What would be the problem here?
View 2 Replies
View Related
Nov 25, 2010
I have installed fedora 14: Linux sunup 2.6.35.6-48.fc14.i686 #1 SMP Fri Oct 22 15:34:36 UTC 2010 i686 i686 i386 GNU/Linux
The problem I am having is that no matter which of the many ways I have found in the forum I can not satisfy the dependencies. For example from the directory that contains the files obtained from code...
View 8 Replies
View Related
Oct 13, 2010
I will say this now; I am still in high school, so forgive my stupidity. I am trying to install either 10.10 or 10.04 on a Dell 1525. It has no operating system on it, and the CD/DVD drive is nonexistent. I have tried to install 10.10 on it using a USB, with both UNetbootin and Pen Drive Linux. Using either one, both end up freezing at the "Preparing to Install" screen. When trying to install 10.04, it will not load, even after 24 hours. On the loading screen, I pressed F1 to view the terminal and got this output:
(process:352): GLib-WARNING **: getpwuid_r(): failed due to unknown user id (0)
Killed
I got all downloads from their home websites, www.ubuntu.com, www.pendrivelinux.com, and www.unetbootin.sourceforge.net. I have spent all my spare time since the newest release trying to fix whatever problem there is, so does anyone know what I did wrong?
View 9 Replies
View Related
May 28, 2011
I've just switched successfully from ubuntu to fedora today. Basically I am really happy with fedora, most problems I had I could solve (with the help of the Internet). However 2 major problem remain:
�) I am unable to run .jar files. I've already installed the "Java" package from the repo, but it didn't help. When typing code...
worked without problems, however a quick test (.....) told me that flash isn't working. When I try downloading and installing flash manually from the adobe site I get a message that this package is already installed.
View 5 Replies
View Related
Mar 20, 2011
I have installed on my Ubuntu 10.10 OS via my laptop MS Office 2011 using wine.
The trouble that I am experiencing is that when trying to install MS Office 2003 to my Pc/ Non-laptop computer with Wine I keep getting the error if I double click setup.exe in the MS Office 2003 CD code...
I have seen many tutorials online but all of them require modifying .DLL's in Wine and none of them have worked so far.
View 1 Replies
View Related
Jul 23, 2010
I have F11 running on my Acer laptop and I'd like to install F13 on a newly created partition.I have downloaded the DVD install a couple of days ago and tried to boot it using different options, but always failed. Below my attempts:
1) first option (Install or upgrade): it took a looooong time (like 4 or 5 hours) to get to the Loading vmlinuz message; after a couple more hours it was still there (with 4 or 5 dots more) and I decided that enough was enough;
2) second option (basic video driver): I tried it with and without the nomodeset option and in both cases the Loading vmlinuz message was immediate, but couldn't get past it;
3) first option (Install or upgrade) with the nomodeset option: again the Loading vmlinuz message was immediate, it added up to 10 or 11 dots and then hung;
4) I also tried to boot the same DVD on another laptop (just to rule out media problems) and quickly reached the first install screen, so the DVD is ok I think.
Note that in ALL the above described attempts, when the boot process hang I see my HD led constantly on and also the DVD led flashing.
View 1 Replies
View Related
Feb 10, 2010
I recently installed Deluge 1.2.0 from the following PPA:[URL]I using this on two different Linux computers. One is running Linux Mint 8 and the other is running Ubuntu Netbook Remix 9.10. The first time on either computer when I enable WebUI in the Deluge GUI it works fine. However if I ever disable it in plugins section I am subsequently unable to re-enable it (doesn't appear in the side panel again). Rebooting or reinstalling Deluge seems to have no effect.Is this a bug or am I doing something wrong?
View 3 Replies
View Related
Dec 30, 2010
Problem:
Error: no such device: f50139a2-b475-4ef5-8217-051bd145a24e.
grub rescue> _
I know it is saying that the harddrive that I installed ubuntu is missing.
Heres the story:
My friend's computer wouldnt let him boot to the CD to install Ubuntu on his computer.
So I put his harddrive into my computer as my 3'rd Harddrive and booted the CD on my Machiene and installed Ubuntu to his harddrive.
We got ubuntu to work just fine, and then I removed his harddrive from my computer... big mistake. I no longer have the harddrive that we installed ubuntu to so I cannot use any programs or anything.
What I want to do is get my Windows 7 working again. Right now I cannot do ANYTHING.
I have tried code...
View 2 Replies
View Related
Dec 31, 2010
I've been dual booting 10.10(with Windows7) for about a month. Today is the first time I've encountered a serious problem.
This morning, nothing functioned properly after trying to open up several programs. The computer seemed to be "frozen", although the mouse was working fine.
I decided to reboot, but then encountered an even bigger problem. It failed to boot and got this message code...
View 9 Replies
View Related
Feb 13, 2011
I am running a CentOS Server (v5.5 x64, with latest CentOS kernel)
The problem is that I cannot enable DMA on my boot drive. My boot drive is an IDE SSD. All my other hard drives are SATA:
/dev/hda = IDE/ATA
dev/sda - /dev/sdf = SATA
---
/dev/sda - /dev/sdd = RAID5 for storage
/dev/sde+/dev/sdf = RAID1 for storage
[Code]....
View 6 Replies
View Related
Dec 1, 2009
I installed fedora 12 as second os along with ulimtate vista on 64 bit machine.
I was able finish the install and boot to fedora first time. but after updating the software , i am unable to boot into fedora but am able to boot in to vista.
I am using a HP Pavilion HDX9000 notebook series. it has 2 100gb hdd. vista is on c and fedora is on d. boot info was written to MBR on C drive.
View 1 Replies
View Related
Jan 28, 2010
Having a major issue with my laptop. I am unable to boot into my Vista installation.I am currently posting this through my Fedora 11 installation which I had already. If anyone is interested, the BSOD error is:
0x0000007B (0x80399BB0, 0xC0000034, 0x00000000, 0x00000000)
As far as I know, a '7B' BSOD is usually a hard disk error but I am 100% sure the HDD is fine as I can read and write from both Fedora and Knoppix without issue. Steps taken so far: Obviously, I have tried the usual steps of trying to start windows in safe mode, last good config, and all of the F8 options. When they failed, I used fedora to check for some solutions online (Mostly useless answers from MS) and I found one successful case when a person flashed his BIOS back to an earlier time. Unfortunately, I cant get the BIOS update I got from the Dell website to boot from a USB drive (Says invalid boot disc - the BIOS on it is in the .exe format which I can't use in linux) and I do not have a floppy drive on the laptop.
So, I put in my Dell drivers and utilities CD hoping that it would give me some option to update (Or roll back) the BIOS but there was no such option. However, it did give me a load of diagnostic options including repair options by symptom so went with the "Unable to boot from BIOS". Unfortunately, that didnt help me at all. So, I got my Vista installation disc (OEM supplied) and managed to get to the repair menu (Which I had among my F8 options anyway) but this also has the option to reinstall. Unfortunately, it states that "Upgrade is unavailable" and that a clean install is the only thing I can select (At the expense of my files and settings).
As for the repair options, the automatic recovery doesn't seem to find any errors, asks to reset and see if all is well (It isn't). For some reason, system restore doesn't detect any restore points. There are no windows memory errors detected and I have no backups. So, i'm left with a command prompt that, by default, is asking for a file in this folder: X:/WINDOWS/System32/ I have no idea where it is getting the X: drive from - I have C and D drives for windows only. As per another online guide, I tried:
[Code]....
View 8 Replies
View Related
Apr 6, 2010
First of all, i'll just say this myself. I'm a dumbass and tried to fix somethings that wasn't even a problem from the start and now my 9.10 installation is totally fubar. There, done, now let's move on.
Ok, so I tried to delete a folder after compiling two binaries to the wrong folder and used the
Code:
rm -r
command on what I thought was the folder /home/lars/bin. And to add to the dumbass-ering, I was root while doing this. The computer hangs and leaves me with no other options than doing a hard-reset via power-button.
After rebooting I can't even see the login screen, it just hangs at the Ubuntu symbol.
So I give the recovery mode option in my grub menu a try and it gives me a bunch of lines, all looking good until I get this and the boot just stops with a blinking underscore. code...
Should I just beat myself for a while and then reinstall the OS or what...?
The hardware involved is a Asus EEEpc 1000h.
ps. I'm new to Linux and have so-far managed to get around by following guides and tips, just a heads-up.
View 9 Replies
View Related
Jan 2, 2011
I am able to get into GRUB and boot Linux, but whenever I select Windows, all I get is an error about a missing boot loader.
After the Windows install disk failed to repair it, I reinstalled the Windows system and then used the Ubuntu live-CD to restore GRUB in order to be able to boot into Linux again. Now I have the same problem as when I started (although the error screen is somewhat different now).
Does anyone know how to break this "evil circle" of mine?
I am using the 10.10 (GRUB 2 in other words).
View 5 Replies
View Related
Jan 12, 2010
I have tried to install ubuntu on my hp server ml350 m6 i have more than 25 times
but this error is coming when select install
busybox v1.1.3
(initramfs)
View 6 Replies
View Related
Jun 4, 2009
A problem with installing CentOS 5.3 from DVD ...
I downloaded the CentOS-5.3-i386-bin-DVD.iso, after recording an image on DVD
Start the installation, selecting Installation Method, chose Local CDROM - Message on my screen: "CD Not Found"
P.S. md5sum matches with this website developer
What a problems?
View 2 Replies
View Related
Jan 8, 2010
How can I install ssh?
I tried following:
yum install openssh
The installation works fine and on the last line appears: Complete!
But openssh is not working:
I tried
ssh root@172.21.35.110
-bash: ssh: command not found
Have you any ideas? The ping works to this maschine.
I checked the rpm (thanks to pSchaff)
rpm -qa *ssh*
openssh-4.3ps-36.e15_4.3
openssh-server-4.3p2-36.e15_4.3
Do I need additional openssh-client?
I tried: yum install openssh-client but without success --> it appers "nothing to do"
View 2 Replies
View Related
Oct 23, 2010
Installed ubunto 10.10. The OS installed just as the directions read. got to the reboot screen and after the reboot all I have is a flashing cursor. Its a new built system.
1T HD 8GB ram AMD X3 450cpu Ati PCI-e 1gb video card. I reinstalled and got the same problem this was NOT an update from 10.4. How do I solve the problem?
View 1 Replies
View Related
Dec 27, 2010
I've been unable to do a non-Wubi install of U 10.10 desktop 32 bit. My setup:
HP p6240f , Intel Core2 Quad Q8300 2.5 GHz, 4 MB L2 Cache, 1333 MHz FSB
Currently, I have a clean install of Windows XP (updated) on my desktop. Previously, I used a clean install of Windows 7, but ran into the same problems below. My U install problems are:
1.) Live CD will not boot upon restarting PC. As per the U documentation web site (URL) , md5sums confirmed that proper .iso copy was downloaded and burned to CD. (However, see log file below for md5 error)
2.) "Installing CD boot helper" does not work. I receive the following error message: "Could not retrieve the required installation files", and it refers to a log file. An excerpt of the log file is below.
12-27 18:06 DEBUG TaskList: #### Finished get_metalink
12-27 18:06 DEBUG TaskList: New task get_file_md5
12-27 18:06 DEBUG TaskList: #### Running get_file_md5...
12-27 18:07 DEBUG TaskList: #### Finished get_file_md5
[Code].....
View 5 Replies
View Related
Jul 11, 2011
I completed an install of Ubuntu server 11.04 last night. After the initial reboot I receive a message stating there is no boot disk. Needless to say, this was irritating. I have run Fedora 14 w/Amahi on this computer for several months but, I wanted to try something different. I am running the following:
Intel DG965WH MB
Intel Core 2 6300 @ 1.86Ghz
4gb Ram
3 2T HD's (WDCWD20EARS-00M, ST32000542A5 and, ST2000DL003-9VT1)
Nvidia 9600GT
Creative X-FI
Sony DVD Optical Drive.
I wanted to use server so I can setup an LV during setup, which doesn't appear to be offered with the Desktop version (during setup I mean). So, ANY help would be really awesome. I don't care which version, of the OPSYS, I use as long as it can do the following:
[Code]...
View 1 Replies
View Related
Jul 27, 2010
Since two days i am unable to add a ppa in my software sources.i have tried by both ways(terminal and directly) but this error shows up..code...
View 7 Replies
View Related
Dec 2, 2009
I am unable to change the installation location for the boot loader when installing Fedora 12 in the graphical installation mode. The 'Change device' button does nothing when I click on it during installation. I'd like to install the boot loader on my /boot partition. Is there some kind of bug that is preventing me from doing this?I am trying to install from the Fedora 12 386 DVD.
View 4 Replies
View Related
