OpenSUSE Network :: How To Configure A Pppoe Connection
Jun 26, 2010
I would like to know how to configure a pppoe connexion? I am testing version 11.2 on live cd but I can't manage to connect my laptop. I used the "green plug software", I filled all the blanks (I am not a total beginner because I have been using Mandriva for a year) but afterwards I can't select pppoe instead of eth0 What should I do?
I read on this forum NET INSTALL PPPOE - Alionet, communaut francophone d'entraide openSUSE et SUSE Linux that the only reason that I can't configure a pppoe connexion is because I am using a live version of 11.2 as result that it only recognizes an ethernet connexion and a modem (everything I said, is said in the forum I linked, but you'll have to read it in french )
I try to configure a pppoe connexion to Tl2, my internet connexion provider. I live in France. My modem is a Bewan ADSL ethernet 100, no need to configure it.
View 2 Replies
ADVERTISEMENT
Dec 31, 2010
I have a ppoe internet connection. I was easier and faster to configure it in Yast than in Windows XP. When
The provider here sometimes goes through some problems and the connection may disappear and return at any unexpected moment. In Windows there is a icon on system tray that dysplays such information and I know when the connection is gone. It also allows me to try to reconnect manually. Where do I find these information on Opensuse here do I manage to reconnect. In Windows it was also possible to set the connection to re-dial automatically when it was out. It was very useful if it failed in the middle of a download, the system reconnected and the download manager retried until download resumed. Is there some way to adjust opensuse to reconnect automatically when connection fails or some software that does it? Furthermore, is there a good download manager that works in Opensuse that pause, accelerates downloads and retries when connection fails?
View 3 Replies
View Related
Nov 15, 2010
I have wireless adapter USB rt1878 working fine.I have to setup pppoe to make internet connection?I need this help?
View 3 Replies
View Related
Nov 15, 2010
I have wireless adapter USB rt1878 working fine.I have to setup pppoe to make internet connection?I need this help?
View 1 Replies
View Related
Jun 26, 2010
I am deployed to Iraq and the Earthlink ISP here uses PPPoE to configure a connection to their wireless broadband. His english skills are pretty good and from what I gather, he's got a DSL connection that he's trying to connect me to. He showed me how he does it on a Windows machine but I can't figure it out on my ubuntu laptop. That windows machine didn't need any IP addresses or server names. It only used a username and password to connect. Of course a strong wireless signal detected was also pre-requisite.
I know my laptop works because I've had great success with it here lately, just not on the Earthlink service.I see their wireless is broadcast and I can connect to it. I just can't figure out how to post my credentials and authenticate.I don't see a way of entering my username and password because I don't know how to install (or configure) for PPPoE.I did use the pppoeconfig and got to the part where I add my username and password, but most of what's going on up to and after that, I do not have the knowledge base to use. So I figured that allowing the defaults and recommended settings would be acceptableYou'll have to forgive me if I've asked another dumb question here. I'm another one of those Linux enthusiasts who is learning and I'm just not willing to switch back to MS just to get internet while deployed.
View 1 Replies
View Related
Mar 14, 2011
I have an internet connection which requires pppoe setup to login with the specified username and password ip address is dynamic.Above are the screenshots for your reference for which I establish the internet connection.the pppoe settings can be done through "sudo pppoeconf" but for the screenshot No. 2.what is the procedure? I need to specify the service name for my internet connection.how to configure my internet connection.
View 8 Replies
View Related
Feb 1, 2010
Im new in this world of linux and suse. I have just installed the opensuse 11.2 in a Dell Inspiron 5160. Such laptop has a BCM4306 Wireless LAN controller. When I tried to configure a wlan connection, I found that the firmware was not installed. After looking in different forums, I installed the firmware b43. Now, my wlan card is abled to find the wireless of my router.
I have tried to configure a connection with YAST as well as with Network Manager, but both cases failled. Specifically, when I use Network manager, Im able to see in the applet my connection, how strong is the signal, but I see a yellow symbol (in one forum, such a box is shown with a green symbol).
I have check many time all about the secutity, encryption, and so one and all seems to be correct. But when I open the mozila firefox or the konqueror browser, no chance to surffer in internet. Now Im just a step to become crazy. The drivers are ok, the information about the router and the keys are ok, but in such a way, I am still harmloss.
View 1 Replies
View Related
Jun 18, 2011
I am having opensuse 11.0 installed. I have BSNL BB plan with "Always on" connection. How to configure internet connection in opensuse11.0 ?
View 1 Replies
View Related
Mar 31, 2010
I installed ubuntu Karmic Koala 2 weeks ago, and while I have been able to connect to my school wireless, I have not been able to establish a PPPoE connection (username and password).After my most recent try, following this guide:-karmic.htmlMy wireless connection has gone as well.My network manager applet shows my school network, and shows that it is trying to connect, but it cannot establish a connectionand i apologize in advance for any information that i am lacking. please let me know, and i'll try to get the information.I'm running ubuntu on a separate partition, alongside windows XP home.
View 2 Replies
View Related
Oct 2, 2010
I installed 10.3 (after buying it a couple of years ago and letting sit on the shelf) and can't get it to configure my ethernet connection or my wireless card. Yast doesn't include a list of available cards, and the error I get in installation-network setup is that the kernel isn't present. The machine I'm installing this on is a Lenovo, in which there isn't a discrete ethernet card (it's in the motherboard), but my wireless card (a Cisco LINKSYS 802.11G) is a discrete card. Because I'm divorcing Microsoft for a number of valid reasons, I don't have Windows available on that box.
View 4 Replies
View Related
Jul 13, 2010
My server SUSE 10.2. I am already working with one pppoe connection, I need to configure the second on the same server? How I do this?
View 2 Replies
View Related
Jul 12, 2010
I have minimal server installation suse 11.2 and i m trying to configure PPPoE through terminal windows but without any luck. I have DHCP activated on mine network card eth0. Mine gateway is mikrotik router board its working fine. I get an ip adres regular from dhcp server. Did someone do something like this.. does not have to be mikrotik as gateway just step by step configuration through terminal window cos i have minimal server installation... I dont use GUI cos its a web testing server on network
View 2 Replies
View Related
Feb 7, 2011
I need to implement at my sister this kind of connection: She is connected on Local area network that has about 50-80 pc's, but for internet access she must start an pppoe connection. For now when she wants to use lan she must put her local address (ps: they dont have dhcp), for pppoe she uses dhcp. Problem is that on that way she can't access lan and internet at the same time. She must disconnect from lan and then start pppoe connection and vice versa. I'm intrested if it is possible to have lan access at the same time as internet access. some kind of tunel through lan up to isp. I was googling little and so PPPoE tunneling. Is it that what I need here?
View 9 Replies
View Related
Jun 30, 2010
i'm using opensuse 11.3 and can't connect to the internet, my eth0 interface (which would be my modem i suppose) is found and when i "activate" it with ifup eth0, it gets stuck waiting for data (says so in ifstatus). If i try with knetworkmanager it is also stuck and doesn't connect to eth0. If i try to make it connect at boot, it doesn't work either.
I think the problem might be that in windows xp my modem has a "limited connection" but i can connect with my pppoe password anyway, but opensuse won't let me connect until it finds eth0 is working correctly which it never will because of how the internet company configures the modems i think. I don't know with which command i could "force" the pppoe connection even without a good connection to the modem, maybe that would work. But on the other hand, with other distros i can connect just fine so i don't know really.
View 1 Replies
View Related
Apr 23, 2010
I'm trying to setup PPPoE connection to establish my DSL connection, but I got
Code:
pppoe[3885]: read (asyncReadFromPPP): Session 4479: Input/output error
pppd[4104]: Cannot determine ethernet address for proxy ARP
in my sylog file.
When I do pppoe-start, it connected but I cannot ping into any destination (even to my modem in the same network). DNS servers are explicitly set in pppoe.conf and resolv.conf. Did I miss anything?
View 2 Replies
View Related
Feb 18, 2010
i can't get a pppoe conection working over a wireless network,in windows I have to connect to the router first, and then put in my user and password to get connected, but i don't know how to do this on fedora, i get connected to the router through network manager, and ping is ok, but when i try to make a new xDSL connection i don't know how to make it work through the wireless network that is established and working with my router.
View 9 Replies
View Related
Apr 7, 2010
Doing a fresh F12 install on a Dell Vostro 430. Machine needs to have 2 Network adapters for our setup.The install seems to go just fine but the on board network adapter doesn't appear to get detected/configured. If I look in /etc/sysconfig/network-scripts all I find is ifcfg-eth0 and ifcfg-lo. Looking carefully at ifcfg-eth0 I see it's the second card that I've put in the machine.As a test I removed the second network card and did another fresh install of F12. This time in /etc/sysconfig/network-scripts all I have is ifcfg-lo. When I go to system>Administration>Network Device Control I see no network devices displayed.
Is this an issue others have seen with F12 or is it possible my on board network adapter has an issue?BTW I did check the BIOS to be sure that Onboard Lan was enabled and it is.output from "lspci -k " with both cards installed on machine (I only listed Ethernet controllers)
View 2 Replies
View Related
Jun 13, 2009
My network is windows pppoe. How can I configure it for Fedora 11? Is there any graphical configuration tool available for that? Also, ubuntu 9.04 logs into pppoe network after restarting as I've made some changes in /etc/network/interfaces. Is there any option available for Fedora 11 to automatically log in to pppoe network after restarting?
View 4 Replies
View Related
Jul 25, 2010
i configured my laptop (running UBUNTU 10.04 LTS) for my broadband (bridge mode). I did that using PPPOE CONF command. Everything goes ok but only prob is i have to run this command and configure my net every time i restart my system. What i need is it should connect to the net whenever i use the PON DSL-PROVIDER and must turn off by using POFF..
View 1 Replies
View Related
Jan 20, 2011
I have this strange problem. I can't setup my PPPoE connection through the kPPPoE. My ISP told me that this PPPoE has something like name server or something like that and i must use some other package to connect.
View 3 Replies
View Related
Apr 24, 2011
PPPOE connection Timed Out-i have downloaded the rp-pppoe utility and installed for PPPOE connection.As per the instruction given with the utility i followed that .i have given pppoe-setup and given all the parameters required like service name , username ,password,firewall as none ,dsn as server an all the option .finally i got the message as congratulation you have successfully setup the pppoe connection.you can use pppoe-start and pppoe-status.
View 11 Replies
View Related
Jun 16, 2009
I have just installed FC11 from a DVD I created from an ISO.I also have FC10 (using here) and Windoze XP pro all on separate HDDs.I have not been able to configure my internet connection, when I try to create a new xDSL connection I get an error message; package needed 'rp-pppoe'.I don't now how to get the package without a connection.I have tried with and without Network Manager.
View 2 Replies
View Related
Feb 4, 2010
I have a Compaq Presario CQ61, instaled Ubuntu 9.10 and Windows 7 on it.
It works great except the PPPoE connection in Ubuntu, when i dial in Windows my download speed reach up to 91 Mb, rebooted in Ubuntu, downloaded same file from the same server with a speed of maximum 3 Mb, cheked in Windows again 80 - 90 Mb constant. I can't figure what slow's the internet connection in Ubuntu.
(NO iptables configured, NO HTB, CBQ ...etc configured) .
EDIT: I don't have any modem or router. I am using PPPoE directly from my PC. I didn't mentioned that I instaled Ubuntu two times but didn't figured out what was causing the problem, so I instaled Fedora 12 (64), this works fine and the speed reached 85 Mb. I instaled latest Ubuntu 10.4 on the same Laptop, the problem is not solved, the speed reaches up to 3Mb, when in Windows or Fedora reaches up to 95 Mb (yesterday).
View 2 Replies
View Related
Apr 29, 2010
I've just done a fresh install of Ubuntu 10.04 lucid lynx and how to setup a pppoe connection in ubuntu. ( thats after 2 hours of googling and trial and error)
system info: its a laptop : Dell Studio XPS 16 connected to a Ethernet hub thats connected to a dsl modem..
View 6 Replies
View Related
Jun 26, 2010
i am completely new to the world of Linux. But i want to learn it. My problem is , i cannot connect my PC to internet. I have a shared broadband connection which needs username and password to connect to internet. I don't know clearly but its something pppoe connection through wan mini port. or xdsl. I contacted my isp but in Our country (Bangladesh) a very few people use Linux or Ubuntu so they cant help me out. i searched many forums,, googled everywhere but cant make it working. i tried some command like "sudo pppoeconfig" but still dont understand. I know there are many people who know how to do this. My Pc configuration:
Processor: Intel Core2duo E8400 3.00GHz
Motherboard: Intel DG41TY
Ram: Transend 2GB 800 buss
Hdd: Samsung sata 400gb
Lan: Realtek PCie GBe family (built-in)
Ubuntu 9.10
I have Fedora 13 also. It looks almost similar to ubuntu at network connection.. is the settings will be the same.
View 1 Replies
View Related
Jul 14, 2010
What is the best client application for connecting through PPPoE (DSL connection)? Gnome's default network manager isn't very useful. I created a DSL connection but don't know how to use that.
View 1 Replies
View Related
Apr 6, 2010
i need help to create a PPPoE Connection ( Breoadband)using RHEL 5 cz my ISP use this type of connection .Plz if there is someone can show me the procedure step by step.
View 3 Replies
View Related
Aug 12, 2010
I am trying to configure a computer to make it as DHCP server.Well, my current connection is PPPOE.So, I should assign one interface to connect as PPPOE, and the other will be broadcast DHCP server.What configuration shall I apply to the dhcp.conf file?
View 3 Replies
View Related
Feb 21, 2011
im on node1 when i type the command ssh node2@ip the terminal hangs up a bit then an error message stating that connection timeout but here is a thing: i cant ping to node2
but i can terminate the ping manually using ctrl+c when i terminate the ping usual message appears stating 10 packets transmitted, 100% loss
ps: when i go to node3 and ssh to node2 it works fine and also i can ping from node3 to node2 very fine. and the firewalls are down at all nodes -all wired connection over a switch
View 6 Replies
View Related
Mar 8, 2010
I am using a broadband internet connection. Currently I am using pon and poff commands to start and stop the internet connection respectively. But for these commands to execute I should switch to the root user. I want even a normal user to be able to start or stop the connection. How can I do this?
View 1 Replies
View Related
