Somewhere out there there has to be someone that can help me set up my lamp server to send automated emails using my cable providers SMTP server
View 2 RepliesI would like to send emails form my server using my gmail account.Does anybody know how to do it?
OS = OPENSUSE 11.3 server installation - NO GUI....
Has thunderbird (recent version) have a "TEST" function ? basically, i'm trying to send messages, with 20+ accounts (different emails, but one domain / SMTP server). one account works fine - the other one doesn't. i go to my "outgoing server" & everything is fine - usernames / ports etc..) The settings for each account do show the right outgoing server. If i 'send later' & close down thunderbird, 7 re-open - it asks me for my password again (which it saves), & then it is able to send the email.
QUESTION :- is there a TESt option that will test each & EVERY account in one timeslot ? Ie, will go through each email address - sends an email to itself (the same address), & sends it. it will then try the server again, to see if the email was received. & then give me a single report, of all the incorrect settings.(I've tried this 1 email account half a dozen times tonight & i dont know *WHY* its not sending on the 1st go.. )
I have a server with a domain running and im trying to resolve the mail server but i can't see where to start. I use OpenSuse 11.2. Basically, for starting, i want postfix to send incoming emails to a php script or perl. for outgoing emails i guess that i could use php mail function and i will see what else to have. I configured the dns. I do a dig.mydomain.tld MX and i get the following:
mydomain.tld3600INMX0 mail.mydomain.tld
mail.mydomain.tld 3600INAmyNumericalIp
So now my system is receiving MX content but i dont know what to do.
opensuse v11.3 I enabled a NFS server on a host, set up a couple of exports, opened the ports in the firewall. When I open the NFS Client on another host and select "Choose", there is popup that states "Scanning for hosts on this LAN...". Then it returns an error "No NFS server found on your network. ..." That's funny because I had previously mounted the two exported directories already by entering the server name manually. How do I get the NFS server to respond to an automated search?
View 2 Replies View RelatedI come back to everybody cause I don't find an explicit how to do this!In our internal network, I've created an email server with Postfix and Dovecot. (Just for internal domain, no needed to go outside)
But I've some server which use linux too. All are on CentOS 5.5.I would like to configure these servers to use my internal mail server for send email, and not configure sendmail or postfix on each server.
What I've to do exactly on each servers to use it? I search on the web but I don't find something very explicit
I am using the Postfix SMTP server for sending emails. However I just did a default installation and subsequently someone is sending spam using my SMTP server. I would like some help on securing my Postfix server and to block these mischievous emails being sent from my server.
View 2 Replies View RelatedI have installed an SMTP server using ...
sudo apt-get install postfix
but I sill cannot send emails from my local machine to my yahoo account using ...
echo "Hi Steve que tal ?" | mail -s "test message" steven_matthews_uk@yahoo.co.uk
Evolution works fine for receiving mail, but I cant send anything.When i hit "send/receive" itll receive but ask for smtp password every single time. My understanding is that the password is your email password, but it wont accept it.
View 4 Replies View RelatedI'm looking for a smtp solution that will split all incoming emails and send them to two different servers.
On mail server 1 I have test@example.com
Om mail server 2 (different location than mail server 1) I also have test@example.com
MX-record for example.com should point to mail server 3. Of course there will be a mail server 4 that will do the same as mail server 3. Mail server 3 will receive all incoming mails and forward them to both mail server 1 and 2. This will be a simple and cheap but bullet proof redundancy solution. I'm interested in this solution, have already looked into clusters, backup mx, imap-sync and a ton more of solutions but this is the solution we want. ny one who can point me in the right direction? I've been searching for weeks, the solution exist but I can't find out how to set it up. Not all mail should be forwarded this way, only one example.com, not example2.com or example3.com.
I'm needing to stand up a Lamp server for a SugarCRM migration. I've been told I need to ensure php 5.2 on the box along with ensuring several mod's are installed as well for php and apache. I was planning on using the lamp provided from xampp (apache friends) but they're current build is using PHP 5.3, any suggestions on how to get around it? If I have to build the whole thing from several packages (apache, php, mysql) then no problem, but I really like the myphpadmin page that comes with the xampp installer.
View 2 Replies View RelatedI have a LAMP server and need a web page to send email messages. I could do it with my Win 2k server through my cable service but can't seem to get it to work here.
View 9 Replies View RelatedI currently have a LAMP server running with multiple virtual hosts configured. I have one virtual host with a sub directory that contains pdf news letters.do not want the directory browsable and tried putting an index.php file that re-directshe user to the root directory but when I go to the [web address]/[directory name] in any browser I see the contents of the folder listed.
Currently the news letter list is drawn from a database table and displayed as links on a page in the root directory. The links point to the file name in the sub directory. How do I block users from going to that sub directory and seeinge contents of that directory listed? Would I add another <directory> statement in the vhosts.conf file? If so how would I structure that directive?
setting up my LAMP server to send email messages through my cable network SMTP server. If you respond please realize that I am new to linux/apache. I cannot send emails out with the built in email server on Suse and don't even know if it is enabled. I used to do it with my IIS/ColdFusion server but there were options for the outbound SMTP server and authentication. I have searched and think I have to use something called Pear but to be honest the instructions are vague to say the least and it all looks greek to me.
View 2 Replies View RelatedI'm stuck with postfix. It cannot send emails and I cannot find out why! smtpPort 25/tcp is open. I can telnet localhost with 25, but not the localhosts IP(192.168.1.15). Sendmail is OFF. Here is the main.cf file!
# See /usr/share/postfix/main.cf.dist for a commented, more complete version
# Debian specific: Specifying a file name will cause the first
# line of that file to be used as the name. The Debian default
[code]..
I have configured Postfix on a Ubuntu 8.04 box using this tutorial:I can send emails but I cannot receive any email because of a "bad recipient address syntax:"The log from /var/log/mail.info says this:
Code:
Apr 25 14:46:06 360romania postfix/pickup[31716]: 74A682190661: uid=0 from=<root>
Apr 25 14:46:06 360romania postfix/cleanup[32402]: 74A682190661: message-
[code]...
Install and configure Pear so that I can send emails using php scripts on a Suse 11.2 LAMP server?
View 4 Replies View RelatedHow do you configure the firewall to allow external web access (it's a LAMP server) and internal access for samba shares ?
View 6 Replies View RelatedI'm experimenting with with mail-servers now and I'm trying to configure postfix to send emails from one email(pop3 is gmail) to any email outside the local network. Server is Ubuntu 10.10 with the last updates.
View 1 Replies View RelatedI am using postfix as my MTA. It is running on ubuntu and I am administering the system through webmin, try as I might with different configurations, I can't send email from a client. when I look in the mail.log i only find:
Jul 26 15:31:00 alpha postfix/smtpd[17430]: connect from unknown[99.153.1.214]
Jul 26 15:31:31 alpha postfix/smtpd[17430]: lost connection after UNKNOWN from unknown[99.153.1.214]
Jul 26 15:31:31 alpha postfix/smtpd[17430]: disconnect from unknown[99.153.1.214]
I'm rather (VERY) inexperienced when it comes to Linux, but Fedora 14 is the environment I have to use on my laptop at work, so please forgive any dumb that comes out of me.
How do I tell php to send an email with mail() using an external mail server?
The situation: I've got apache/php running a webserver on my local machine. It's for dev purposes only, and the website files I'm using are checked out from our SVN. This lets me make changes to our website while not actually changing our website.
I've come across an issue I'm fixing where I need to verify that an email is successfully getting sent out, and unfortunately, this email is sent out using php's mail(), and not our website's usual $mail object. Unfortunately, I don't have the authority to change how this sends out right now, just when it sends out.
I've been running everything fine on my machine for a month now, and haven't needed the mail stuff until now. How do I tell php to send an email using an external server?
How to seup nagios to send email to mails in MS Exchange server ?
View 3 Replies View RelatedHow to communicate with an SMTP server with telnet, in order to send a mail?
telnet smtp.something.somewhere 53 Trying
10.xxx.xxx.xxx...
Connected to smtp.something.somewhere.
Escape character is '^]'.
And that is as far as I got. What do I have to do after?
What do I have to write after "HELO"?
I've been having this problem since 10.6 released, but have until now been successful with the "just use Thunderbird" response. My sendmail server hasn't been changed, but as clients upgrade from OSX 10.5 to 10.6 suddenly mail.app will no longer connects to send SMTP messages through the server. (IMAP connections to the same server using the same user/pass combinations work perfectly) When I look at the logs, things basically stop right after the STARTTLS command.
Google indicates alot of people are having similar problems, but I'm not seeing any solutions. Do any of you administrate sendmail servers where some of your clients are using Apple's Mail.app on Snow Leopard, and if so what settings are you using? At this point, I'm happy to make changes to the server to accommodate Apple's issue, I have too many Mac users connecting to my server. I just can't figure out what to change. I've enabled virtually every possible login authentication combination, and none of them work.
I'm trying to set up a basic smtp server on my local computer that I can send basic, unencrypted email through on port 25. I installed postfix, and I chose the following options:
Internet Site,
System Mail Name: localhost
Root and postmaster mail recipient: I left this blank
For other domains to accept mail, I entered : NONE, localhost
No force synchronous mail updates
Local networks: 127.0.0.0/8
[Code].....
I have a domain name registered in asianet.com, they provide email service also, can i use local mail server and registrar's smtp server at same time?
View 5 Replies View RelatedI have installed a linux server in my office to run 16 machines. Its main use will be a internal mail server but will be also running websites.
I have installed Ubuntu 9.10 server x64 and have got apache running.
I am looking for the simplest more robust solution for smtp, pop3 and imap. I have only ever used qmail before and found it a pain to configure and its getting old so I though I should probably try something new. I have not much experience with running pop3 or imap on linux so would love a suggestion on that.
I am sure there is a nice guide out there somewhere but I cannot find it. My question is: The company I work for has a fully windows environment, servers and clients. The current server is on a Windows 2000 Server and I plan on replacing that. I wish to use Ubuntu server with Joomla for this purpose. This is my first venture into a purely command line interface, although I have played around with Ubuntu desktop in the past. My first question right now is: How do I log onto the Windows Network (active directory) from the ubuntu server. eth0 is reporting a valid internal IP on the network, so its been picked up okay.
Edit: I also want to assign a static internal IP address instead of grabbing from the DHCP. Edit2: Thinking about it, as the ubuntu server and windows server can ping each other do I even need to log into the domain? The server will only be serving web pages.
I'm wondering a couple of things about my LAMP stacks:
1) How do I get a list of all the network cards installed in a linux box? I've run this command and it shows 2 network cards which is probably all of them:
Code:
mii-tool -v
2) How can I check the percent utilization of a given network card? I.e., at any given time, what linux command will tell me the how much of a network card's bandwidth is being consumed? I've checked both ethtool and mii-tool and I don't really see any helpful stats.
3) How can I make sure that a linux box will optimally use both network cards? I'm a bit fuzzy on how IP addresses and network cards and hostnames work together.
I am trying to find out how to get the mobile broadband providers to appear on the network manager app, coz at the moment when i try to create a new mobile broadband connection the list of providers is empty.
View 3 Replies View Related