I have installed an SMTP server using ...
sudo apt-get install postfix
but I sill cannot send emails from my local machine to my yahoo account using ...
echo "Hi Steve que tal ?" | mail -s "test message" steven_matthews_uk@yahoo.co.uk
I am using the Postfix SMTP server for sending emails. However I just did a default installation and subsequently someone is sending spam using my SMTP server. I would like some help on securing my Postfix server and to block these mischievous emails being sent from my server.
View 2 Replies View RelatedSomewhere out there there has to be someone that can help me set up my lamp server to send automated emails using my cable providers SMTP server
View 2 Replies View RelatedI have the following config with Postfix:
Quote:
But it keeps coming up with:
Quote:
Is there any reason from these configs as to why this should be occuring?
This was the guided step by step tutorial I followed: [url]
I have wordpress installed on my VPS, which is running 10.04.1 LTS. I appear to be having an issue whereby the server isn't sending out emails to new users, nor to myself when I get comments on the blog.I'm at a dead end for where to look next, because the settings are exactly the same as they were with my previous VPS (and they were always pretty generic), but yet it doesn't work.
View 5 Replies View RelatedI'd like to have anything that tries to send mail locally on my machine (including crontab reports for instance) to be handled by my ISP's smtp server instead of my machine acting like it's own SMTP server. I've spent around 15 hours trying to figure out how to do this and I keep either getting into things that I don't understand, or hitting brick walls (for instance, I found nullmailer, but after installing it, it seemed like it would only work on Unix) Is there an application like nullmailer which I can use as my MTA to forward all internal mail to a different SMTP?
View 3 Replies View RelatedHas thunderbird (recent version) have a "TEST" function ? basically, i'm trying to send messages, with 20+ accounts (different emails, but one domain / SMTP server). one account works fine - the other one doesn't. i go to my "outgoing server" & everything is fine - usernames / ports etc..) The settings for each account do show the right outgoing server. If i 'send later' & close down thunderbird, 7 re-open - it asks me for my password again (which it saves), & then it is able to send the email.
QUESTION :- is there a TESt option that will test each & EVERY account in one timeslot ? Ie, will go through each email address - sends an email to itself (the same address), & sends it. it will then try the server again, to see if the email was received. & then give me a single report, of all the incorrect settings.(I've tried this 1 email account half a dozen times tonight & i dont know *WHY* its not sending on the 1st go.. )
One of our postfix servers is for sending/receiving internal emails only. When a user entered a wrong recipient address, it will take almost an hour for the user to get the "Recipient address rejected" email. What can be done to let the user get the "Recipient address rejected" email quickier.
View 7 Replies View Relatedi had configured mail server in linux. i had configured sendmail in linux client . i have error while sending mail through thunderbird smtp auth error how can i resolv the issue .....
View 1 Replies View RelatedI just got control over a server that was hacked several months back. The other day we started receiving rejected emails sent from my server to a yahoo email address that is no longer active that contained users login information. I am trying to find the process that is sending these emails. So far its been like finding a needle in a haystack. The email that is being sent is appending the login information each time it is sent so there must be a local file that contains this information. I have tried using grep and find without any luck.
View 2 Replies View RelatedI have a 64bit linux server with 5 virtual hosts on it. When someone fills out a contact form on one of the sites...I get 15-20 copies of the same email. At first I thought it was the kids clicking send multiple times because the first emails were coming from the children's ministry "Email The Cast" section. But then I started getting multiples from the adult sites too. All contact forms are set to come to me.
What's stranger is that my registration section for one of the sites uses the SAME php script (different file) to email me a notification that someone has registered but I only get 1 copy of that.
I would like to send emails form my server using my gmail account.Does anybody know how to do it?
OS = OPENSUSE 11.3 server installation - NO GUI....
i'm not a techie but have tried my best to solve the issue without success. I have a static IP from local ISP and my computer is configured with 192.168.1.2 (LAN IP).
I have installed ubuntu server 9.04 and want to send emails from my server for which I've configured postfix. But I dont know what to do next.
My questions are:
1. Do i need to install DNS server for using postfix? If not, what should I install to send emails from this server?
2. Do I need to forward any particular port in my router?
3. If I dont have a fully qualified domain, what are the configurations I need to do to send emails?
I want to send mails via gmail with php. I need to know how to configure main.cf, php.ini, postfix,smtp... and all what is necessary. I tried a lot but no results.
View 5 Replies View Relatedi've got Evolution as an email client in Fedora 12.ve got only one IMAP account configured, which seems to be working OK. However, temporarily it is not sending emails. I write an email and hit send/receive and get error. "Error while sending message" ir seems that it is downloading messages, but not sending. There is a quick, but annoying solution to it: restart Evolution. As soon as it is restarted (close and ope the application) it is working OK for some time.
View 2 Replies View RelatedI have a static IP from local ISP and my computer is configured with 192.168.1.2 (LAN IP).
I have installed ubuntu server 9.04 and want to send emails from my server for which I've configured postfix. But I dont know what to do next.
My questions are:
1. Do i need to install DNS server for using postfix? If not, what should I install to send emails from this server?
2. Do I need to forward any particular port in my router?
3. If I dont have a fully qualified domain, what are the configurations I need to do to send emails?
I have an rsync backup job scripted and run by cron at 12:00 every day. It emails me the log from rsync. The problem is that it sends the same email every minute starting at 12:00 and ending at 1:00. I can't figure out what I did to cause this. It is not happening on my other ubuntu server.
Code:
# m h dom mon dow command
* 12 * * 1,2,3,4,5 /home/barry/bin/backup.sh > /dev/null
Code:
#!/bin/sh
rsync -aut /usr/share/library /mnt/backup/WordPress > /home/barry/backup.log
[Code]....
I have sendmail setup and it works fine sending emails to outside email addresses. When I try and send email to our internal groupwise server the mail never gets there and I get an error message in the log user unknown.
View 1 Replies View RelatedI have installed Ubuntu onto a machine and am trying to get it to receive fax's and email them to me! After spending days on this I have installed efax-gtk and have successfully set it up to receive fax's and email them to me!
Everything is working, I can send and receive fax's ok, But when I set it with the 'mail_fax' script, I dont get an attached file, All I get is a directory location of the temp file, Witch is obviously deleted by the 'mail_fax' script! No Attachment is in the email.
/home/dell/efax-gtk-20101103135335.pdf
Fax 20101103135335 received by efax-gtk attached
All I want is the attachment to be attached!
I'm trying to get logwatch to email me. I think my logwatch.conf file is okay. I have postfix installed. The mailer as far as I can tell is set correctly ("usr/bin/mail"). When I run logwatch - I get "no mail for aubrey"
Heres my logwatch.conf file:
Code:
linux-qwkb:/home/aubrey # edit /usr/share/logwatch/default.conf/logwatch.conf
########################################################
# This was written and is maintained by:
# Kirk Bauer <kirk@kaybee.org>
#
# Please send all comments, suggestions, bug reports,
# etc, to kirk@kaybee.org.
#
######################################################## .....
I have a domain name registered in asianet.com, they provide email service also, can i use local mail server and registrar's smtp server at same time?
View 5 Replies View RelatedEvolution works fine for receiving mail, but I cant send anything.When i hit "send/receive" itll receive but ask for smtp password every single time. My understanding is that the password is your email password, but it wont accept it.
View 4 Replies View RelatedI'm looking for a smtp solution that will split all incoming emails and send them to two different servers.
On mail server 1 I have test@example.com
Om mail server 2 (different location than mail server 1) I also have test@example.com
MX-record for example.com should point to mail server 3. Of course there will be a mail server 4 that will do the same as mail server 3. Mail server 3 will receive all incoming mails and forward them to both mail server 1 and 2. This will be a simple and cheap but bullet proof redundancy solution. I'm interested in this solution, have already looked into clusters, backup mx, imap-sync and a ton more of solutions but this is the solution we want. ny one who can point me in the right direction? I've been searching for weeks, the solution exist but I can't find out how to set it up. Not all mail should be forwarded this way, only one example.com, not example2.com or example3.com.
I have two accnts in Thunderbird 3.1.10 in Lucid 64bit - gmail and itt-tech.edu (smtp.live.com). I removed apparmor because of the bug not allowing the file system to be mounted. I can send via gmail, not smtp.live.com. Smtp settings are correct. Any security package setting that might be hindering this mail send action?I have UFW installed.
View 1 Replies View RelatedWhen I am using Mailutils to send messages to myself as a test, I get them but they are from <"ryandward@ryandward"@gmail.com> which is not a valid email address and I have no idea why my system is configured to send them from this address. This is indicative of some problem there is going on in my system.
View 9 Replies View Relatedi have problem in sending emails using outlook on my client machines i.e XP i am getting the error Relay access denied. i am using fedora 9 as our server. with dovecot and postfix and fetchmail.it was working fine previously .
View 1 Replies View RelatedSince we switched our server to Squeeze, I'm receiving emails from the cron about a mysql error (...can't use locks with log tables). But this is not the issue I want to talk about here. The issue is that since the executed command is: /usr/bin/mysqlcheck -uroot -pmypassword --all-databases --check-only-changed --silent which is a command that was automatically added to the cron by the mysql package (I believe), the password is sent in clear text in the email's subject. In my sense, this is a serious security issue (sending root password in email subject...)
I don't know at what level it should be corrected, but it seems to me like it should be corrected in the Debian distrib, shouldn't it ?
And for now, how can I hide the password in the emails I receive ?
I want to know that by default do we need to configure SMTP and POP3/IMAP sever for sending and receiving mails in Linux server and client machines or we can directly send and receive mails without configuring these mail servers?
View 2 Replies View RelatedIn order to have greater control over the emails sent out the company I imagined the following scenario.ScenarioDescribing in words what I need.ser sends an email to user@hotmail.com for example, using the smtp of my isp (is the internet).Before the email is sent, the firewall checks if the recipient is blocked transparent, if you are locked out rejects the email.I searched several forums and mailing lists, but did not find scenarios similar to mine.Where found situations in which the mail servers were internally in the company, which is not my case.
View 2 Replies View RelatedI have proxy running. I have seen LAN machines sending packets by iftop -P -F 192.168.10./24
[Code]....
How do i set my iptables so that I can only send and recieve http,smtp,ssh,dns,dhcp request in and out of the proxy
[Code]...