I am trying to find out how to get the mobile broadband providers to appear on the network manager app, coz at the moment when i try to create a new mobile broadband connection the list of providers is empty.
View 3 RepliesHow do I activate static DNS for mobile broadband. I can't find any place to write down this information. Settings are made in Network Manager - not Yast.
View 3 Replies View RelatedI want to use my laptop to share network for VoIP adapter. I'm using mobile stick as well as wi-fi and Network manager under Gnome 3. Voip adapter asks for address via DHCP to gain the access to the server some where in the other side of the world.
View 6 Replies View RelatedI have u usb 3G stick and I configured a mobile broadband connection to connect to the internet.I filled all details and saved the connection.Now I clicked on the network manager icon in top right corner, but there was no connection with the name I just created.Again I checked in edit connections dialog box and found the connection there.Now how do I connect to this newly created connection while there is no option in network manager?
View 9 Replies View RelatedI am having problems with my 3 dongle- when I connect it to my netbook it flashes green so it detects a 3G network. However there is nothing in network manager enabling me to choose the mobile broadband so I can't use it. I know there should be an entry "mobile broadband" after the wireless networks listed.
I know the dongle works because I have previously used it successfully- I was using Linux Mint 8 and have now updated to version 9 and when I have tried to use it have been unable to do so.
I have gone into the connections and my 3 connection is present but there is no way for me to select it in network manager.
I have a broadband mobile modem iCon 225 (Option) with SiMobil provider (Slovenia). I run ubuntu 9.10 (Karmic Koala). I connect to the internet without problem. After a few minutes, the modem lights start signaling that there is no connection, but the network manager shows connected status. I have to reconnect the network manager to regain connection. After about a dozen times of reconnecting like this, I have to reboot the system, as it won't connect, even if I unplug and replug the modem.
I've noticed these frequent disconnects have started a few days ago. I did experience disconnects in the past, but as nearly often as this. I can't attribute disconnects to activity/inactivity, as they seem to happen no matter what I do.
I have a k3806-z vodafone mobile broadband modem, on ubuntu 10.04. I have added the mobile broadband connection with the network manager wizard. But network manager does not list my connection. I installed usb-modeswitch and usb-modeswitch-data. Still nothing. The disc utility tells me it recognises the modem as a cd drive and a storage device. Evidently usb-modeswitch is not working.
View 11 Replies View RelatedShould this mobile broadband stick work? It's not showing in Network Manager.
[Code]....
I'm using a 'ice.net' D-50 (CDMA EV-DO rev A) mobile broadband USB modem, also sold as Cmotech CNU-680 in other areas. The modem is connected to a USB port on a hp8710w mobile workstation.
As the 11.2 Gnome Network Manager won't connect this modem to Internet (see my first post here), I have downloaded and installed a 'D50 Modem Manager program' from [url]
After unpacking and installing this cmotech-qtmodem-1.6-1.i586.rpm package for suse on 11.2 x86_64, the gui application 'D-50 Modem Manager' is found in the Internet Group.
However, neither this program does connect the D-50 modem really on 11.2 x86_64 (as it did on 11.1 x86_64). Tried both traditional network setup and with Network Manager.
Any idea and suggestion how to trobleshoot this further? I think I've seen that a newer version cmotech-qtmodem 1.9 has been mentioned on the web, but without being able to find and download this version.
Command output as follows:
As normal user:
On the Modem Manager gui: D-50 modem is ready
From Login script Debug window:
As root:
It seemed like the modem connected, but Firefox was not able to connect afterwards (Server not found)
I connect to the internet with a mobile broadband dongle. I would like to change the dns settings as page loading seems to be running slow. However, there is no ip tab associated with mobile broadband in the knetwork manager module. There is however for my vpn connection. I have found reference to the ip tab in other postings but alas I am stumped. Is it possible that the mobile broadband connection does not load that tab whereas users on wireless or ethernet have it? That is the only solution I can think of.
View 2 Replies View RelatedProblems with setting up mobile broadband in KDE4? Than use this instruction: openSUSE starter: Step 2. Need mobile broadband? Use the GNOME applet to make the GNOME nm-applet work under KDE. With this nm-applet I have set up mobile broadband within couple of seconds.
View 1 Replies View RelatedI have a Huawei E173u-2 mobile broadband usb stick. It is recognised as a gsm-modem and shows up as such in the networkManager-plasmoid. I have set up the connection details for my ISP (O2), but I can't connect. When I click on the connection, "signal strength" is shown as well as "operator" (o2 - de). The "connection state" changes to "Preparing to connect", then "Setting network address". Then the modem vanishes and comes up again a few seconds later.
Here is the log (/var/log/messages):
Code:
It seems like there is a connection for about 5 seconds, then the modem hangs up and restarts .
The stick works fine with our windows netbook, so I don't think it is a hardware failure.
How do I get this working?
My system:
opensuse 11.4
kernel 2.6.39-30-desktop (2.6.38 gives the same error)
kde 4.6.3
plasmoid-networkmanagement 0.9.svn1192577-168.6
I have this usb stick:
The problem is that I have no clue what information I am supposed to give when configuring it through KNetwork manager. The password is disabled and I think the username should be telenor which is my ISP, the other info lines in KNetwork manager, however, I am very uncertain of, and I can't seem to get it working. I have switched from traditional setup with ifup to user controlled through Network Manager and the modem is detected. The module option seems to be loaded and the 'mode' of the stick seems also to be correct, it is not detected as a storage device at least.
I've just installed openSuse 11.3. How can i connect to the internet. The Mobile Broadband tab on YaST is not clickable. On Linux Mint that tab is available.
View 2 Replies View Relatedi am using mobile broadband to connect with network after i connecting mb.it drops it's connection for every 10 minutes.i need to restart to reconnect it.it is happening in kde.
View 5 Replies View RelatedI manage to get my mobile broadband working (connected, I mean) in both root & user account. However, my web browser, IM etc only work in root account.In user, knetworkmanager does show that my Huawei E160G is working fine, connected but I still can't surf the net & chat. I've included the dialout & uucp group for user account but that still doesn't resolve the problem
View 9 Replies View RelatedI want to install a driver for the Mobile broadband HSDPA modem of the Lenovo T510 nootebook because it dosent work with the Networkmanager.
I use opensuse 11.3 whith the kernal 2.6.34-12.
So what i want to do:
1) get attached patch
2) install and extract kernel source
3) patching and compilation (only drivers/usb/serial subdirectory)
4) copy resulting modules to kernel modules directory
If I compile: make O=../temp prepare i get a mistake.
The exactly mmessage is:
I am looking to buy my own unlocked/never-locked mobile broadband modem, and I want it to work well on my 64-bit 10.04 Ubuntu system (triple-booting MacBook 4,1). Is there a list of mobile broadband modems supported in the linux kernel out there somewhere? I did try to find one myself, but no luck. The Huawei E220 looks good, but it is discontinued.
View 2 Replies View RelatedI m nokia mobile to connect to internet in 11.2 configured it all in n/w manager with phone number *99#
APN: XYUX(as given by provider)
Also wrote the dns in resolv.conf but all in vain . it is not connecting neither dialing any number just shows "activating" but with no progress earlier in 11.1 i used kinternet (but i couldn't find it here) is there not any other dialer ? as i ve heard that n/w manager is quite troublesome.
I have a Acer Aspire running dual boot Ubuntu 9.10 and Vista. Although it has an Atheros wireless card (AR5001 according to linux, AR5007 according to Vista) until recently I didn't have any apparent problems with it.I installed a ZTE MF112 Mobile Broadband Dongle. Now I am experiencing great difficulty in communicating with my wireless router (with both LAN and WAN traffic). Connecting to the network in the first place appears to happen quite smoothly and my computer obtains a DHCP IP address. However the ping response times are measurable in seconds rather than the milliseconds I would expect, and any traffic across the network crawls, or just times out and fails.
I do not believe it is the router at fault as two laptops, both also with Ubuntu, can connect to it fine and swapping it out for another router does not fix the problem either. Also there is no problem connecting from Vista.I suspect that installing the dongle has altered something which has made the bugs in the wireless card/drivers apparent and that's where I need some help.
I am trying to use my tmobile 8320 blackberry as a modem I hook it up through the USB and the phone is recognized I go into network manager to enter the settings for my Apn and Number to dial to and when I try to enter the Network to connect to the apply button goes away and it won't let me go past that point is this something screwed up in Ubuntu
View 1 Replies View RelatedI have internet access using mobile broadband and i also have a wireless network for home usage without internet access.
When my wireless network is connected every application in ubuntu (Meerkat) tries to use it for inernet access (as neededobviously). As soon as i disconnect from the wireless network (and assuming the mobile broadband is on) everything has access to the internet again using the mobile brodband.
How do i tell ubuntu that i don't want it to use my wireless network for internet access?
is there any tool (terminal command preferably) which can show the frequency and the type of the connected mobile broadband network. I mean HSDPA/GPRS etc and 900/2100MHz. At my country there are 2 frequencies used for UMTS, 900MHz for rural areas and 2100MHz for urban and I need to know what type is the connection and what is the used atm frequency. I am using wvdial for connecting to the internet.
View 2 Replies View Relatedi am using samsung S3310 with aircel when i am connecting new mobile broadband connection my device is not identifying ,so that i cant connect Internet.but everything okay i mean settings in mobile and pc. for same connection i used Nokia mobile its identified and Internet was connected but samsung mobile is not identifying in terminal i typed LSUSB my device is shown in that.
View 9 Replies View RelatedI need help with connecting to cdma mobile broadband for a tethered samsung phone. When I first installed Suse the phone icon on the network manager icon was all i needed to do to connect to the cdma network.After rebooting later the icon is gone and i cannot manage to connect. The connection is still there, but it is as if the computer no longer recognizes my phone as a modem. Well sense i just installed i figured lets try reinstalling to see if it was a bad installation. It happened exactly the same again. If anyone has any idea how to get network manager to allow me to connect to the internet again i would be grateful.
specs:
toshiba satilleite l305
Suse 11.3
Samsung R560 (Samsung Cdma Technologies)
I am trying to use the HUAWEI E1756C USB stick to connect to the internet. Installing usb_modeswitch and usb_modeswitch-data allowed networkmanager to "recognize" the stick and set up a mobile broadband connection.
The result is that NM succeeded in connecting (one of every five attempts) but firefox does not surf, nor emails can be downloaded etc. Just like if not being connected. The USB modem shows the steady blue LED as connected.
A NM issue? I have tried disabling NM control and tried with PPP clients like NMTSMON, wvdial and even Sakis3g. All with the same results. They seem to connect and show flux up and downloaded but no surfing.
resolf.conf shows is pretty much empty and no DNS there.
The working settings in Window$ are:
Same settings with Sakis3G, or NMTSMON or NM result in connection with no action from applications that use the internet.
I have had a similar issue with WLAN each time I change to a different network. I solve that by forcing to update the DHCP. I mean using -su dhcpd wlan0
But attempts like dhcpcd ttyUSB0 or dhcpcd ttyS0 get the same result. So no idea if this is an DHCP, or DNS or another issue.
My box is an ASUS EEEPC 2005H netbook with OpenSuSE 11.2 and KDE
I am using open suse 11.3 with kernel 2.6.34 KDE is 4.4.4, I have Lenovo G550 laptop My system sometimes detects and connects the modem to internet and sometimes its doesn't detects and I am unable to connect to internet I have all the updates installed. Because of this I have to use Forbidden OS (windows)
View 2 Replies View RelatedOn my Lenovo T410 (openSUSE 11.4 KDE - 64bit) I have mobile broadband. Gobi-loader is installed and working properly. However when I try to setup mobile broadband connection the KDE Control Module crashes. Tried many times also after reboots, though KDE Control Module keeps crashing.
View 6 Replies View RelatedJust replaced a working install of Ubuntu because i like GS over unity but i cant get my USB760 EVDO card to work. The usual fix of editing the cd.rules file and copying some information into modem.fdi does not seem to work on F15..
Also, noticed that when i attempt to create a broadband connection using network manager it allows me to go through all of the setup dialogs, but never actually adds the broadband connection.
I have a dell insp 1545 windows7-ubuntu9.10 dual boot. the linux os would not activate the wireless network function in the network manager (but the cricket broadband was being detected and was in fact active). well, i did a little looking around and found another network mgr (wicd?, i think it's called... or something like that) and installed it. IT is working, but now the cricket broadband is down, which is my mainstay internet connection right now. i'm thinking that maybe it's got something to do w/the flipflop.sh function but that's just a wild guess.
View 1 Replies View Related