OpenSUSE Network :: Get The NFS Server To Respond To An Automated Search?
Jan 15, 2011
opensuse v11.3 I enabled a NFS server on a host, set up a couple of exports, opened the ports in the firewall. When I open the NFS Client on another host and select "Choose", there is popup that states "Scanning for hosts on this LAN...". Then it returns an error "No NFS server found on your network. ..." That's funny because I had previously mounted the two exported directories already by entering the server name manually. How do I get the NFS server to respond to an automated search?
View 2 Replies
ADVERTISEMENT
Jun 19, 2010
Somewhere out there there has to be someone that can help me set up my lamp server to send automated emails using my cable providers SMTP server
View 2 Replies
View Related
Jan 29, 2011
I'm using debian lenny.When I boot with kernel 2.6.36, ping always respond with Network is Unreachable. But when I boot with kernel 2.6.26 it works. I can't even ping the dafault router of 2.6.26 kernel when I am at 2.6.36. Also, system/administration/network does not show any connections while it shows something at the other kernel.
View 1 Replies
View Related
Jul 29, 2011
My organization is running a VMware vSphere based platform. On top of that we have a Sun Gridengine cluster consists of a number of ubuntu VMs.At the moment, we deploy new cluster nodes from the VM template. Although it already saves us lots of time, we still need to configure the network, host name, register DNS record manually.In a near future, we will need to add 100+ more hosts to the cluster. So we are seeking a automated deployment so that a VM does the following during its first boot:
1)configure the network for the correct IP with DHCP or manual.
2)request a designate host name (maybe from a pre-defined datasource?) and configure host name.
3)register itself to our DNS servers.
We don't really have experiences for running big cluster. So welcome to share your opinions and experiences.Specially I'd very keen to find out if there is any well-proven solution right there or I will need to implement from the scratch.
View 7 Replies
View Related
Aug 17, 2009
Run a script on ServerA which uses a ssh-connection to ServerB to execute a few commands on ServerB. As ServerB only allows login with username+password the whole stuff gets more complex. SSH provides key authentication enabling passwordless login as you probably know. So as stated in many tutorials I did the following:
Quote:
ssh-keygen -t dsa
ssh-copy-id .ssh/id_dsa.pub osr@10.17.120.207
Trying to connect with
ssh osr@10.17.120.207
should now be passwordless but I'm somehow still getting the prompt for the password.here the output from ssh -vvv osr@10.17.120.207
Quote:
OpenSSH_4.1p1, OpenSSL 0.9.7d 17 Mar 2004
debug1: Reading configuration data /etc/ssh/ssh_config
debug1: Applying options for *
[code]....
interesting are probably the following lines:
Quote:
debug3: Not a RSA1 key file /users/osr/.ssh/id_dsa.
debug2: key_type_from_name: unknown key type '-----BEGIN'
View 11 Replies
View Related
Jul 4, 2011
I have two servers, both running Ubuntu 11.04 Server. One is a web server, running only a LAMP stack and openssh-server. The other is running server daemons for TeamSpeak and Minecraft. Today, the game server just went down. I can access the LAN by using SSH to connect to the web server, and ping it from there. However, it won't respond to SSH or anything else. The server is a few kilometers from here, so I will be going there tomorrow.
This happened once before, probably about a month ago or something. That time, the web server was running just fine, but the game server was powered off. I thought there had been a power disruption, because when I checked the BIOS settings of the game server, it wasn't set to resume after AC power loss. The web server was set to do this, so it made sense that it would be up and running again after a brief power loss. There were also some news reports about power disruptions in my area.
The thing is, I changed the BIOS settings of the game server to make sure this wouldn't happen again. When I go there tomorrow, I will bring the server back up. However, I would like to know what caused this so that I may prevent it from occurring again. Is there a logfile or something that I can check tomorrow to find the problem?
View 2 Replies
View Related
Apr 29, 2010
I have Centos 5.4 installed on my server. Everything works perfect, however sometimes apache does not work properly. When I write my domain to browser it tries to reach the site, however it can't get any result. (There is no "browser couldn't find" error). The browser just tries to get the content.
When I login to my server with ssh using my domain name, there is no problem. (Named works.) When I give the "service httpd restart" command the problem disappears.I looked at httpd log files but there wasn't any problem at that time.I use the API's of the Facebook and Twitter, so there are many Curl requests are made with PHP. Could that be the reason?
View 2 Replies
View Related
Apr 22, 2009
How do I make a scripts to automated login ftp to more 20 server at one time? From fedora to ftp X 20 linux server.
View 2 Replies
View Related
Sep 27, 2010
This is my first post and I am a linux newbie.. took on the challenge of setting up an ubuntu server with proxy and firewall with vpn access as well.. sounds good? While messing with things, I installed ebox server, know called Zentyal and perform backups, however, when performing a full restore, following instructions and all it does not restore correctly. I ran many attempts with verious configurations and still allways got some errors, such as eboc-ebackup failing to start, etc. most noteably wa sthe ldap error, which i figured out how to fix by restarting once logged into and then rebooting.
I say the Clonezilla options for a full backup, and it sounds great, but does require me to perform a full abckup, while bring the server down to perform. What I wanted to know, was what do you recommend for performing a full backup (possibly to NTFS partition or USB key with FAT32) with automation or even if i had to perform the trigger, just without needing to bring the server down, so when i go into production i dont have any issues backing up anytime?
View 2 Replies
View Related
Jun 12, 2010
The desktop search has stopped working in Gnome.I get a message that says 'Search Service not running' with a button that says 'Start Search Service'.When I click the button nothing happens
View 1 Replies
View Related
Mar 14, 2010
I recently updated my girlfriends laptop (and my own) to KDE 4.4 (using the Factory repository). I am also using some additional repositories like PackMan.
I recently read on this forum, that the updater-applet is only updating from the main repositories (the ones set up after install). I would like to update from all updates periodically using "zypper dup".
I read somewhere else, that cronjobs are used to run scripts based on schedules. how I could run "zypper dup" with a cronjob and preferably under root, so I dont have to type the password every time?
View 9 Replies
View Related
Jan 21, 2010
I am trying to get a server to boot off the lan (pxe). I added a tftp server and tested it as operating successfully. I just plugged the pxe-server in and see the dhcp request/response as expected. The pxe-server then sends out an arp to the same address as the dhcp exchange, but the server never responds.
1. as the pxe-server already has info on the mac/ip-addr, why is it now sending another arp
2. why doesn't the server respond? I have most of my network setup the same way and the dhcp exchange is fine.
3. I'm guessing that the arp is triggered by the bootp exchange (next-server).
I do not have the server in the host table under that address.
127.0.0.1 localhost
127.0.1.1 ubuntu-desktop
192.168.5.101 windows1
Do I need to add 192.168.5.120 with a name to get arp to respond?
View 1 Replies
View Related
May 26, 2011
I just finished set up a PXE server, and was wondering is it possible to automated save/redirect files from the client into server? Basically, test will be running on client, and wanted to save the result(text file) into server after done testing.
View 1 Replies
View Related
Jul 21, 2011
I'm confronted with a problem and haven't been able to find a solution using Google and the likes. I have created a netinstall image based on CentOS 5.6 with kickstart which works great while pointing to the HTTP / NFS repository in isolinux.cfg like this:Code:label publisherkernel vmlinuz append initrd=initrd.imgks=http://192.168.0.198/kickstart/ks.cfg cdncontentpublisherThe problem however is that the location of the kickstart file and repository/ies might vary and I don't want to create a separate ISO for each and every location.
View 5 Replies
View Related
Sep 11, 2010
I need to create a network boot from 1 laptop to another, with a crossover ethernet cable between them, no routers no nothing, my computer is supposed to be the server. I followed half dozen tutorials over the internet but I think my major problem is with the dhcp serverfollowed this tutorial[URL]but when the client boots it makes several dhcp requests but doesn't respondwireshark capture looks something like this until the client times out
Code:
1 0.000000000 0.0.0.0 255.255.255.255 DHCP DHCP Discover - Transaction ID 0x200d8ad
[code].....
View 7 Replies
View Related
Mar 16, 2010
I have two dhcp server (dhcp3) in the same network, this network is a link layer network so every host is seen as directly connected. The two servers have debian lenny and there are near 13 AP mikrotik to give connection to the XO laptops (from the project one laptop per child). This is for two public schools (each one with one server) that are connected via a p2p connection and each one provides internet for the school and outdoor too. The servers are also file servers, proxy, etc.
Each time a laptop asks for an IP, it sends a broadcast message and this petition gets to both servers, now a days the first server that reply is the one the laptop associate with. What I want to do is, knowing the bandwith use of the ADSL, the clients connected to the server, and the cost to the AP that the laptop associate with, decide wich is the best server to be connected to. What I want to achive is to balance the load and to decide the optimum connection, because now it could happen that one server is very loaded and the other is free. I tried to run dhcp with inetd and use tcp wrappers to invoke a script to check a condition before responding and, in case to be the best server, reply to the laptop, but i couldn't get the dhcp server to respond when I run it with inetd. here is my inetd.conf
bootps dgram udp wait root /usr/sbin/tcpd dhcpd3
View 1 Replies
View Related
May 18, 2010
There is this server running squid and dansguardian as proxy for the local network. Everything is working fine. But I have seen that from time to time the danguardian dies out and fails to respond to shutdown or restart commands. And this is because of the binary located at /usr/local/sbin named dansguardian goes empty. There are multiple instances and hence copying another named dansguardian.2 to dansguardian does it. And dansguardian works normally as it should. Looked into dmesg and /var/log/messages but nothing there. It was compiled and not installed from pre compiled binaries. And runs on CentOS5.4 Final.
View 3 Replies
View Related
Jan 9, 2011
I got a CentOS server setup as a dhcp server using dnsmasq. I followed this guide more or less: [URL] So, the problem seems to be concerning the DNS server on the clients. In windows I get the "limited connectivity" icon for the network, and when I select troubleshoot it says the DNS server does not respond. Issuing 'ipconfig /all' clearly shows the IP of the CentOS machine as the DNS server, which should be correct, yes?
ETH0 is working as WAN connection and that works great.. no problem with the WAN connection at all on the CentOS machine. ETH1 has the IP 192.168.0.1 and mask 255.255.255.0 When starting eth1, it sometimes says that it can't start eth1 because the IP 192.168.0.1 is already in use.. but that is most certainly not the case. Maybe there's some kind of issue here that messes with the DNS? What's mind boggling is that it works great on a linux machine (dhcp client) and on a windows xp machine. but it does not work on the windows 7 laptop and a vista laptop and a pda device.
View 1 Replies
View Related
Mar 1, 2011
I have a CentOS 5 Server running for private fun... Just for playing with it and learn a little linux.this server has to Network interface cards. one for connecting from extern and one from connecting from the LAN.when i want to connect from lan (eg via SSH) this allways works!when i want to connect not from LAN this only works sometimes! only if i establish at the same time a connection from LAN it wors mostly.with other devices i have no problem (tested another server with just 1 NIC) and this works too.also the problem is not dyndns because i have the same problem when i try to connect through the direct IP.
View 3 Replies
View Related
Nov 16, 2010
I have CentOS 5.5 x86_64 with Apache, php and mysql.
I have just installed OTRS (helpdesk - trouble ticket system) on that server and no users.
This system works with perl, apache and mysql.
I notice that is slow to respond and at times unresponsive the apache welcome page. code...
View 5 Replies
View Related
Mar 13, 2010
I'm trying to find a secure way to backup files on my Prod Server to Backup Server. It must be automated, so I will need to run a command with cron which will login to Prod Server from Backup Server and backup data. 1. Do you think it would be secure enough to do this by creating an passwordless RSA private key on Backup Server and adding it's public key to authorized_hosts file on Prod Server? I can't think of a way to Automate this without having to enter any passwords without passwordless RSA key. Is there another. more secure way? 2. Should I create a special user for backup, which will only have read access to all files in the directory that I am backing up? If so, How can I run a check that this new backup user indeed has read access to ALL files in the folder that I intent to back up? How can I ensure the backup process will not skip files due to some permission problem? 3. I'm thinking of using rsnapshot tool, which uses rsync.
View 10 Replies
View Related
Apr 16, 2010
I recently set up a new web/file server with 9.10 server x64 with 2 NICs and I am trying to configure eth0 to respond to my LAN for internal samba filesharing and eth1 to handle website/ftp requests on my static IP, but whenever eth0 is up the server is not accessible at 173.XX.165.65 for web or ftp but both work fine at 10.1.10.100. When eth0 is down, public IP works fine. I have set /etc/network/interfaces like this:
Code:
# The primary network interface
auto eth0
iface eth0 inet static
address 10.1.10.100
[Code].....
View 1 Replies
View Related
Aug 11, 2009
I cannot get either sendmail or postfix to send a 220 response, nor respond with details. See below for sample telnet output. Details: I have a server that requires email, but only for light use. I'm definitely not an expert, but I have set up a sendmail configuration on a previous server. I tried to configure sendmail first and then postfix later, when I couldn't get sendmail working. I'm not sure exactly what the problem is, but I have a feeling the following might yield some important information. Note: this is the result for Postfix, but virtually the same thing happened with sendmail, too. That is, initially the telnet connection would close immediately. Afterwords, I could connect a second time but then it never responded with a 220 banner nor any 250's.
[Code]...
View 4 Replies
View Related
Aug 3, 2010
I am running KDE 4.4.4 Stable from the openSuSE Repository for KDE 4.4.4 stable as included with 11.3.At first after initial installation Kontact worked and I could access Email, Address Book, Calendar, etc. from the icon bar. Now, Kontact starts, opens the Summary page, but no selections respond, only the Kwin responds to terminate the application, it just seems to hang and has to be killed to terminate. Anyone have similar issue or ideas on what may be causing it? I can start KMail, Kaddressbook, as separate applications and all respond as normal.
View 4 Replies
View Related
Oct 11, 2010
I recently setup a new Linux server running Fedora 10. For some reason all ping response times are rounded to the nearest 10ms. For example, running the simple command "ping yahoo.com" give the following sample results:
64 bytes from ir1.fp.vip.re1.yahoo.com (69.147.125.65): icmp_seq=12 ttl=57 time=60.0 ms
64 bytes from ir1.fp.vip.re1.yahoo.com (69.147.125.65): icmp_seq=13 ttl=56 time=50.0 ms
64 bytes from ir1.fp.vip.re1.yahoo.com (69.147.125.65): icmp_seq=14 ttl=56 time=40.0 ms
64 bytes from ir1.fp.vip.re1.yahoo.com (69.147.125.65): icmp_seq=15 ttl=56 time=50.0 ms
I could post a larger result set but its all the same... every response is rounded to a multiple of 10ms. This wouldn't be a big deal except that the server is running Nagios for monitoring so accurate stats are important. The Nagios check_ping and check_icmp commands are also returning rounded off results. How can I get ping to simply respond with the actual response times rather than a rounded off number?
View 1 Replies
View Related
Feb 4, 2010
This is opensuse 11.2.
Somehow zypper is running at 100% cpu and won't die with command line kill, the system monitor kill, terminate or anything. I set it's priority to the lowest it will go, tried to stop it then kill it, nothing works as it simply is not responding to anything and it has been running now for 47 hours.
Is there a way to simply dump a process out of memory without requiring it to respond to a signal? because signals are doing nothing.
View 6 Replies
View Related
Jan 21, 2010
I'm new to networks and servers, been using Linux on the desktop for a while now but always relied on the company's IT guy for setting up everyting LAN-based.
Now I want to build up my home LAN, and want to do it with Linux. I've managed to set up LAMP and file share servers.
What I am looking for is information on what I need, and how to set up a server for the following tasks:Centralized Username and Password, that when the user logs into any one of the desktops in the LAN, it uses this for authentication
Something that allows this authentication to be utilized in other servers (file access, web access, router logging, etc.). Something to make it easier for continuing permissions from one service to another. e.g. I have IPCop filtering content, and it has provisions for tracking who is making which request if there is authentication going on. (optionally) to run a script for mounting Samba shares or mapped network drives so from one system to the next. For example, in whatever box somebody logs in, it mounts a server share ("smb://Myserver/users/<username>") to a local folder ("my_user_share").
So;user "fred" ="smb://Myserver/users/fred" and user "wilma" = "smb://Myserver/users/wilma" but both would find their respective one mounted under "~/my_user_share". This would be irrespective of which box they are loggin in with. If the server share location changes (new server/servername), I change it on the server so the next time they log in it points to the right place.
I guess it is similar to Window's Active Directory, though I'm not sure what it's called, how to configure it and what it is and is not capable of doing.
View 2 Replies
View Related
Feb 26, 2010
I have openSUSE 11.2 installed and i need to create a gateway server that allows virtual private network connections. I want to play with my friends some lan games, but we are in different networks, so i want to create this gateway server so we can connect with VPN clients to this server and play freely.
View 7 Replies
View Related
Jan 7, 2011
I have recently make a website. When I enter to it by http://localhost it works fine, but when I enter by my IP, nothing apears. Firefox told me that the server takes too long to respond.
View 1 Replies
View Related
May 12, 2011
I have an opensuse 11.3 install which I want to set up as a network boot server to install Solaris 10 on a Sun Ultra 10 client. According to what I've read, this requires rarpd and tftpd which I've set up on opensuse, but also bootparamd which I can't find for 11.3. It seems it was last included with opensuse 9.2. Does anyone know if it's available, if I could use the suse 9.2 version, or any alternative?
View 3 Replies
View Related
