Ubuntu :: Send Messages, With 20+ Accounts ( Different Emails, But One Domain / SMTP Server )?
Jul 21, 2011
Has thunderbird (recent version) have a "TEST" function ? basically, i'm trying to send messages, with 20+ accounts (different emails, but one domain / SMTP server). one account works fine - the other one doesn't. i go to my "outgoing server" & everything is fine - usernames / ports etc..) The settings for each account do show the right outgoing server. If i 'send later' & close down thunderbird, 7 re-open - it asks me for my password again (which it saves), & then it is able to send the email.
QUESTION :- is there a TESt option that will test each & EVERY account in one timeslot ? Ie, will go through each email address - sends an email to itself (the same address), & sends it. it will then try the server again, to see if the email was received. & then give me a single report, of all the incorrect settings.(I've tried this 1 email account half a dozen times tonight & i dont know *WHY* its not sending on the 1st go.. )
View 1 Replies
ADVERTISEMENT
Jun 19, 2010
Somewhere out there there has to be someone that can help me set up my lamp server to send automated emails using my cable providers SMTP server
View 2 Replies
View Related
Aug 25, 2010
I have evolution set up to send emails using gmail's smtp server. I've always been able to do it with no problems, but a couple of days ago I stopped being able to send emails to gmail accounts. I can send emails to other addresses but not gmail. The same happens with my wife's laptop with ubuntu. The only thing I can think of is that we recently moved and thus changed ISP, but I don't see how that's preventing us to send mails specifically to gmail accounts...
View 3 Replies
View Related
Oct 28, 2010
I would like to send emails form my server using my gmail account.Does anybody know how to do it?
OS = OPENSUSE 11.3 server installation - NO GUI....
View 9 Replies
View Related
Nov 28, 2010
Evolution works fine for receiving mail, but I cant send anything.When i hit "send/receive" itll receive but ask for smtp password every single time. My understanding is that the password is your email password, but it wont accept it.
View 4 Replies
View Related
Apr 21, 2011
I'm looking for a smtp solution that will split all incoming emails and send them to two different servers.
On mail server 1 I have test@example.com
Om mail server 2 (different location than mail server 1) I also have test@example.com
MX-record for example.com should point to mail server 3. Of course there will be a mail server 4 that will do the same as mail server 3. Mail server 3 will receive all incoming mails and forward them to both mail server 1 and 2. This will be a simple and cheap but bullet proof redundancy solution. I'm interested in this solution, have already looked into clusters, backup mx, imap-sync and a ton more of solutions but this is the solution we want. ny one who can point me in the right direction? I've been searching for weeks, the solution exist but I can't find out how to set it up. Not all mail should be forwarded this way, only one example.com, not example2.com or example3.com.
View 3 Replies
View Related
Nov 27, 2008
I have a domain name registered in asianet.com, they provide email service also, can i use local mail server and registrar's smtp server at same time?
View 5 Replies
View Related
Jan 29, 2010
I just configured my first postfix mail server today. Everything is working correctly except for the fact that on all outgoing emails instead of the mail format being user@mydomain.biz it says user@hostnameofpostfixserver. I've looked everywhere I can think and I cant see where I'm substituting the host-name of the server for the domain name of my email. Where else could it be?Below is my main.cf. I am running ubuntu 9.10.# See /usr/share/postfix/main.cf.dist for a commented, more complete version# Debian specific: Specifying a file name will cause the first# line of that file to be used as the name. The Debian default
View 2 Replies
View Related
Dec 13, 2010
I am using the Postfix SMTP server for sending emails. However I just did a default installation and subsequently someone is sending spam using my SMTP server. I would like some help on securing my Postfix server and to block these mischievous emails being sent from my server.
View 2 Replies
View Related
Apr 23, 2011
I have installed an SMTP server using ...
sudo apt-get install postfix
but I sill cannot send emails from my local machine to my yahoo account using ...
echo "Hi Steve que tal ?" | mail -s "test message" steven_matthews_uk@yahoo.co.uk
View 8 Replies
View Related
Aug 26, 2010
I am thinking of getting a domain name or ten I do not know were to point the domain to?
and what do I need to setup if a user wants a domain name to point to his account on the server? ok more like I want to have a few domains pointing to my user accounts I have setup on the server..can I do this directly or do I need a server domain first before users can get a domain name?
I have a basic setup user web space and ftp and mysql setup
what extra would I have to install or not to be able to get a domain pointed to my server and/or user accounts?
I don't seem to be able to find anything specific on how to set this up anywhere.
View 7 Replies
View Related
Jan 31, 2010
I've got a server set up with Debian. The problem is that my ISP doesn't allow usage of port 25 (as I understand a lot of ISP's don't).I have PHP scripts hat use the mail() function to send e-mails through the Sendmail application.So, my question is: How can I relay messages sent to sendmail to an external SMTP server (like Google Mail, for example)? Would this be easier to do in the PHP configuration, or on the Sendmail side of things?I've used PEAR extensions in PHP to achieve this before, but scripts downloaded from the Internet generally just use the basic mail() function, and it would be a real pain to modify them all.
View 2 Replies
View Related
Jan 19, 2010
I want to run a DMZ postifx smtp relay that will collect and relay several domains, this I can do. But is it possible to then relay each domain to a different server?If so how ? and what set up is needed.
View 2 Replies
View Related
Jan 24, 2011
1. I have registered Domain name/website, suppose = test.com, hosted on another ISP.
2. I have another Static IP, suppose = 1.2.3.4
3. Now I want to setup/configure mail server to send and receive Emails for "test.com", say a user from anywhere can use mail server by using webaddress of "mail.test.com"
4. Mail server will be mange locally in my own setup, accessible from everywhere.
5. Please give some examples, howto use registered domain name (for example = test.com) with static public ip (suppose= 1.2.3.4), so user can use only mail.test.com, not static ip address.
View 4 Replies
View Related
Apr 20, 2010
I am newbie to postfix. I added a new domain to my postfix server in the main.cf under mydestinations variable and the relay_domains file. Also, added this domain to my backend exchange server. When I send a test message from the new domain, my messages from that domain appear to be stuck in the "queue active". What does it mean when you are stuck in this queue? Does this mean that my backend email server (exchange 2003) isn't allowing messages from this new domain OR that the POSTFIX server still needs configuring.
View 2 Replies
View Related
Feb 8, 2011
I'm stuck with postfix. It cannot send emails and I cannot find out why! smtpPort 25/tcp is open. I can telnet localhost with 25, but not the localhosts IP(192.168.1.15). Sendmail is OFF. Here is the main.cf file!
# See /usr/share/postfix/main.cf.dist for a commented, more complete version
# Debian specific: Specifying a file name will cause the first
# line of that file to be used as the name. The Debian default
[code]..
View 4 Replies
View Related
Mar 15, 2010
I am looking at setting up a multiple postfix SMTP servers for a single domain. Below is my requirement, I would appreciate if someone out there could guide me to achieve this using postfix..
1. Want to setup 2 postfix SMTP Server with 1 POP3 Server.
2. Server1 will host POP3 & SMTP services for domain "metallica.one".(IP: 1.1.1.1, MX: mx1.metallica.one)
3. Server2 will host only SMTP services for domain "metallica.one" (IP: 1.1.1.2, MX: mx2.metallica.one)
4. Server1 & Server2 will be used as load balancing for sending mails. (either manual settings in email client, or auto-loadbalancing is still preferred).
5. Mail received for domain metallica.one on Server2 should be pushed/forwarded/relayed to Server1 where POP3 services are running.
6. Outgoing mails for other domains from Server2 should be sent directly to the other-domain-recipients without relaying to Server1.
View 2 Replies
View Related
Apr 9, 2010
I have a server "test1" in domain [URL]. I installed sendmail on it. I have another mail server "mailsrv" installed in [URL] which is my primary mail server and contains all accounts and mailboxes. Now when I send email to [URL] from [URL] it sends successfully. But when I try to mail to user1@abc.com it tries to search user1 in [URL] but I want it to forward this mail to mailsrv.abc.com over SMTP port. Delivery will then be taken care by [URL]
My log shows following
Code:
Apr 9 18:37:06 test1 sendmail[7512]: o39Db6Hs007512: to=user1@abc.com, ctladdr=root (0/0), delay=00:00:00, xdelay=00:00:00, mailer=relay, pri=30047, relay=[127.0.0.1] [127.0.0.1], dsn=2.0.0, stat=Sent (o39Db6Il007513 Message accepted for delivery) It should not go to relay=[127.0.0.1], it should go to relay=[10.10.10.1]
View 4 Replies
View Related
Jul 3, 2010
I have a server that runs on a static IP address with many hosting accounts. I am using the IspCP to manage the different sites. When a mail is sent, the headers include the box's own domain name: [URL]. Now [URL] is no longer active, so if an email from another account: [URL] sends mail, there is possibility that this mail is rejected by the receiver, if the receiver system does rDNS.
The receiving server will check the headers smtp sent from [URL] and come up as a fake, because [URL] is no longer registered. I wonder if there is a way to make the smtp headers reflect only the domain name that sent the mail. Then if joe sends mail, the server should replace[URL] with [URL]. If this is possible, then users that send mail will not get bounced because the rDNS lookup will map [URL] to the ip and the mail will be accepted.
View 2 Replies
View Related
Apr 25, 2009
I have configured Postfix on a Ubuntu 8.04 box using this tutorial:I can send emails but I cannot receive any email because of a "bad recipient address syntax:"The log from /var/log/mail.info says this:
Code:
Apr 25 14:46:06 360romania postfix/pickup[31716]: 74A682190661: uid=0 from=<root>
Apr 25 14:46:06 360romania postfix/cleanup[32402]: 74A682190661: message-
[code]...
View 9 Replies
View Related
Apr 4, 2011
I come back to everybody cause I don't find an explicit how to do this!In our internal network, I've created an email server with Postfix and Dovecot. (Just for internal domain, no needed to go outside)
But I've some server which use linux too. All are on CentOS 5.5.I would like to configure these servers to use my internal mail server for send email, and not configure sendmail or postfix on each server.
What I've to do exactly on each servers to use it? I search on the web but I don't find something very explicit
View 3 Replies
View Related
Feb 8, 2011
I'm experimenting with with mail-servers now and I'm trying to configure postfix to send emails from one email(pop3 is gmail) to any email outside the local network. Server is Ubuntu 10.10 with the last updates.
View 1 Replies
View Related
Jul 26, 2010
I am using postfix as my MTA. It is running on ubuntu and I am administering the system through webmin, try as I might with different configurations, I can't send email from a client. when I look in the mail.log i only find:
Jul 26 15:31:00 alpha postfix/smtpd[17430]: connect from unknown[99.153.1.214]
Jul 26 15:31:31 alpha postfix/smtpd[17430]: lost connection after UNKNOWN from unknown[99.153.1.214]
Jul 26 15:31:31 alpha postfix/smtpd[17430]: disconnect from unknown[99.153.1.214]
View 1 Replies
View Related
Jun 11, 2009
I install qmail server from source according to document on qmailrocks.org but when i add domain and email account and after press the button create the next window in explorer is blank.
View 1 Replies
View Related
May 10, 2011
How to seup nagios to send email to mails in MS Exchange server ?
View 3 Replies
View Related
May 25, 2010
I'm trying to set up a basic smtp server on my local computer that I can send basic, unencrypted email through on port 25. I installed postfix, and I chose the following options:
Internet Site,
System Mail Name: localhost
Root and postmaster mail recipient: I left this blank
For other domains to accept mail, I entered : NONE, localhost
No force synchronous mail updates
Local networks: 127.0.0.0/8
[Code].....
View 2 Replies
View Related
Jan 20, 2010
How to communicate with an SMTP server with telnet, in order to send a mail?
telnet smtp.something.somewhere 53 Trying
10.xxx.xxx.xxx...
Connected to smtp.something.somewhere.
Escape character is '^]'.
And that is as far as I got. What do I have to do after?
What do I have to write after "HELO"?
View 3 Replies
View Related
Aug 3, 2010
I've been having this problem since 10.6 released, but have until now been successful with the "just use Thunderbird" response. My sendmail server hasn't been changed, but as clients upgrade from OSX 10.5 to 10.6 suddenly mail.app will no longer connects to send SMTP messages through the server. (IMAP connections to the same server using the same user/pass combinations work perfectly) When I look at the logs, things basically stop right after the STARTTLS command.
Google indicates alot of people are having similar problems, but I'm not seeing any solutions. Do any of you administrate sendmail servers where some of your clients are using Apple's Mail.app on Snow Leopard, and if so what settings are you using? At this point, I'm happy to make changes to the server to accommodate Apple's issue, I have too many Mac users connecting to my server. I just can't figure out what to change. I've enabled virtually every possible login authentication combination, and none of them work.
View 1 Replies
View Related
Mar 19, 2010
I have to configure sendmail to send messages only and not receiving any mails on a linux server when the mail server is on another server.how to configure sendmail?
View 5 Replies
View Related
Jan 2, 2009
I'm trying implement a small server for a university work, my server is creating, binding and listening but it don't accept any connection, these are the files I'm using in server:
Code:
// Definition of the Socket class
#ifndef SOCKET_H
#define SOCKET_H
#include <sys/types.h>
code....
I've made a client just for test it, but no ones run well, the server is always returning -1 when accept is called!!
What should I do to send and receive messages in this server??
View 3 Replies
View Related
