Server :: Sendmail SMTP Send Doesn't Work With OS X 10.6 Mail.app Clients
Aug 3, 2010
I've been having this problem since 10.6 released, but have until now been successful with the "just use Thunderbird" response. My sendmail server hasn't been changed, but as clients upgrade from OSX 10.5 to 10.6 suddenly mail.app will no longer connects to send SMTP messages through the server. (IMAP connections to the same server using the same user/pass combinations work perfectly) When I look at the logs, things basically stop right after the STARTTLS command.
Google indicates alot of people are having similar problems, but I'm not seeing any solutions. Do any of you administrate sendmail servers where some of your clients are using Apple's Mail.app on Snow Leopard, and if so what settings are you using? At this point, I'm happy to make changes to the server to accommodate Apple's issue, I have too many Mac users connecting to my server. I just can't figure out what to change. I've enabled virtually every possible login authentication combination, and none of them work.
View 1 Replies
ADVERTISEMENT
Apr 11, 2011
I am trying to configure sendmail to use GMail to send emails. I followed the instructions at[URL]lay-howto.html but it failed.After I was done with these instructions, I think I "cooked" sendmail... Can no longer configure it and it seems that I will have to start from scratch again...How to get sendmail to send emails using Gmail's SMTP server?
View 12 Replies
View Related
Nov 15, 2010
I had configured sendmail on linux 5.2, Iam using public ip and my domain is registered[linuxforfreshers.info]. I am facing a issue that when I mail with the user sumit@linuxforfreshers.info then I am able to do it. But if somebody tries to send mail to the same user then it bounce backs. I had made the entry of domain in /etc/mail/local-host-name and also I put ok in /etc/mail/access.The mails are working properly with in LAN. But not able to work on WAN only I can send mail but not able to recieve mail.What else I need to do.
View 6 Replies
View Related
Jul 30, 2011
I am setting up a CentOS box as a NAT firewall that needs to also send mail. It needs to send this mail using an outside provider's SMTP. The provider requires SMTP over SSL. None of the machines inside the NAT will ever send mail except via the provider's SMTP nor will they ever receive mail except to local clients via the provider's IMAP servers.
So for the example the machine is TESTMACHINE. There is one internet facing ethernet port connected to a DSL modem via pppoe.
The SMTP it needs to send mail via is mail.host.net which requires SMTP over SSL (port 465) and username/password authentication.
The sendmail documentation is quite confusing on how to get this simple setup operating, so an example showing the appropriate changes to sendmail.mc and other require config files.
View 1 Replies
View Related
May 15, 2010
the mail server itself will receive mail, that part works. i'm using dovecot imap to grab my mail, that works. but if i try to send mail from my iphone using an account on that server it doesnt work. this is what i see in syslog: May 15 07:14:52 coax postfix/smtpd[1432]: NOQUEUE: reject: RCPT from mobile-166-137-139-003.mycingular.net[166.137.139.3]: 450 4.1.8 <eppo@customconnexions.com>: Sender address rejected: Domain not found; from=<eppo@customconnexions.com> to=<xxxxxxx@aol.com> proto=ESMTP helo=<[10.25.15.47]>
View 1 Replies
View Related
Jan 20, 2010
How to communicate with an SMTP server with telnet, in order to send a mail?
telnet smtp.something.somewhere 53 Trying
10.xxx.xxx.xxx...
Connected to smtp.something.somewhere.
Escape character is '^]'.
And that is as far as I got. What do I have to do after?
What do I have to write after "HELO"?
View 3 Replies
View Related
Apr 4, 2011
I come back to everybody cause I don't find an explicit how to do this!In our internal network, I've created an email server with Postfix and Dovecot. (Just for internal domain, no needed to go outside)
But I've some server which use linux too. All are on CentOS 5.5.I would like to configure these servers to use my internal mail server for send email, and not configure sendmail or postfix on each server.
What I've to do exactly on each servers to use it? I search on the web but I don't find something very explicit
View 3 Replies
View Related
Jun 1, 2011
I have configured Sendmail client to send mail to outside network ( Within local domain ), but i am unable to send any mail as i am getting the following error,
[root@cclx10 mail]# cat test |sendmail -v abhilash-o.padmanabhan@hp.com
abhilash-o.padmanabhan@hp.com... Connecting to [127.0.0.1] via relay...
abhilash-o.padmanabhan@hp.com... Deferred: Connection refused by [127.0.0.1]
I have the following configuration in my "/etc/sendmail.cf" file
# SMTP daemon options
O DaemonPortOptions=Port=smtp,Addr=15.146.237.113, Name=MTA
And netstat is showing that sendmail is listening on Port 25 on the IP address which is mentioned.
[root@cclx10 mail]# netstat -an |grep 25
tcp 0 0 15.146.237.113:25831 0.0.0.0:* LISTEN
tcp 0 0 15.146.237.113:25 0.0.0.0:* LISTEN
View 1 Replies
View Related
Jan 22, 2011
I'm currently running Ubuntu 10.10 Server using VirtualBox 3.2.12 r68302. I've setup a LAMP Server and Installed Redmine and I'm going to be starting some projects. The problem I have is that I've linked it to a subdomain thru my hosting, so things are a little more complex for me then usual. Here's the software I've added for this setup:
Ruby version 1.8.7 (i686-linux)
RubyGems version 1.3.7
Rack version 1.1
[code]...
how mail server functionality works as well as how to properly set the host of the virtual pc.
View 1 Replies
View Related
Jun 21, 2011
I try to configure nagios server in my network. In nagios server I need to configure sendmail rely agent. I configured sendmail like given below
Code:
dnl #DAEMON_OPTIONS(`Port=smtp,Addr=127.0.0.1, Name=MTA')dnl
define(`SMART_HOST', `mail.mydomain.com')dnl
define(`RELAY_MAILER_ARGS', `TCP $h 25')dnl
define(`ESMTP_MAILER_ARGS', `TCP $h 25')dnl
[code].....
View 1 Replies
View Related
Feb 24, 2010
I have users [URL] unable to send email to [URL]. [URL] user also unable to send email to [URL]. But both email addresses are fine as they can receive email from others or from [URL] and [URL]. I able to telnet mail server 110 and 25, no problem. Version: ESMTP Sendmail 8.12.10
Mail Log:
Feb 23 11:36:35 mail sendmail[16228]: o1N3aZxt016215: to=<xxx1@gas.com>, ctladdr=<xxx@abc.com> (501/501), delay=00:00:00, xdelay=00:00:00, mailer=esmtp, pri=442918, relay=gas.com, dsn=5.1.2, stat=Host unknown (Name server: gas.com: no data known)
[code]....
View 4 Replies
View Related
Oct 21, 2009
How to restrict some uses to send mail to outside domains except local in sendmail.I am using ( CentOS5 + Sendmail )
View 2 Replies
View Related
Jul 13, 2010
I have been trying to set up ssmtp so I can send email using Gmail's ssmtp servers. However, when I try to send mail (using mailx), I get the following message:
Code:
Can't send mail: sendmail process failed
Here's the last line from dmesg (the only one applicable, according to the timestamps and message content):
Code:
[484114.608378] sendmail[17975]: segfault at 0 ip b7dbbbf3 sp bfb0dc4c error 4 in libc-2.11.2.so[b7d44000+14e000]
Here's my ssmtp.conf:
Code:
#
# /etc/ssmtp.conf -- a config file for sSMTP sendmail.
#
[code].....
View 2 Replies
View Related
Nov 27, 2010
I'm running a server with Ubuntu 10.04 and I have installed postfix and courier. The server can recieve mail and I can fetch them using POP, but when I try to send mail it doesn't work. Postfix itself can send email if i telnet from localhost and I am using my ISP as a relay because they block port 25. I'm using outlook 2007 on my client computer and it just says that the server rejects the login attempt and tells me to check my username and password. Postfix listens on port 12 as well because the client connection also has outgoing on port 25 blocked. I have tried to use telnet to connect to the server, and I can connect. This is what I get:
[Code]....
Now what? I've tried searching for the answer but all I can come up with is AUTH PLAIN or AUTH LOGIN, but I don't know what to type after that.
View 2 Replies
View Related
Apr 28, 2010
I have a dedicated server running CentOS 5, Plesk 9.2.2, SMTP Postfix and Courier-IMAP.The issue I have is that on all domains on the server receiving email works fine however sending email never seems to work. This is from email programs, my phone, webmail and PHP. None of them seem to be able to send email. If it is of worth Spam Assassin is running however I don't feel it is causing any problems.
View 7 Replies
View Related
Jan 13, 2010
i have running sendmail 8.13 on my red hat enterprise linux 5.1, but i have a problem. I can send a mail from my line command terminal to hotmail, gmail, yahoo and any of these, but i can't send mail to my own domain ([URL]), when i wrote a mail i get a reply from MAILER-DAEMON@localhost.localdomain that says that the message had pemanent fatal errors and shows as user unknown the mail was suposed to recive the message.
For example, if i send one mail from user1@mydomain.com to user2@mydomain.com the user2 does not recive any mail, but that doens not happens if user1 sends a mail to any hotmail address or gmail or any other. Besides i also can't recive on my server any mail to user1@mydomain.com or user2@mydomain.com (for example), so please tell me what do i do to get the mail.
View 2 Replies
View Related
Apr 5, 2011
How to send mail using sendmail on slackware? Can you show me a simple bash program that sends a message to an email? I am new to slackware and I can't send my email using sendmail command. I checked my mail queue on my Webmin and i see this status "access map: lookup [URL]..
View 9 Replies
View Related
Jan 14, 2011
We host our own mail server on our Fedora box. We would like for our field people using there smart phones to be able to send and receive mail. Receiving is no problem but sending creates problems with relaying and port assignments. Is there any way sendmail can be configured to allow these mobile phone users (AT&T, Verizon) to send mail through our server?
View 1 Replies
View Related
Mar 17, 2010
I have sendmail setup on my server but for some reason the following command does not send me an email: echo "test" | mail -s testsubject xyz@gmail.com
however in my crontab i have MAILTO="anemail@anemail.com" and it that is pumping out emails.
I am running this on an AmazonEC2 machine running Fedora Core 8.
View 1 Replies
View Related
Apr 30, 2009
I would like to send the logfiles and the CallDetailRecording-files of my Asterisk-server weekly to my email-address.
But I'm having some issues...
This is the command I would use in a script :
View 5 Replies
View Related
Jan 28, 2010
I used fedora12 builded mail server uning sendmail and dovecot at my home, when I at home everything are works fine, no matter I sent email to hotmail, or hotmail sent to my mail server, but I got the problem that I can't access my home server when I at office, the error messages as below:
#telnet xxx.xxx.xxx.xxx 110
-ERR Cannot connect to POP server xxx.xxx.xxx.xxx (xxx.xxx.xxx.xxx:110), connect error 10061
#telnet xxx.xxx.xxx.xxx 25
[code]....
P.S there is no firewall between the my office and home
View 3 Replies
View Related
Aug 11, 2011
I'm trying to setup notification function for the Nagios Core which use Mail to send notification.I got an account from Rogers. I have SMTP server, email account with authentication information.My Nagios server is in a workgroup, there is now domain assigned to it, I just use nagiosserver.localdomain in /etc/hosts.I added Rogers SMTP server in /etc/mail/sendmail.mc and Future (AuthInfo) I created an /etc/mail/AuthInfo and add AuthoInfo:smtpserver "U:user" " P: pwd" "M:Plain"I added smtp server in /etc/mail/access for RelayI added root@nagiosserver.localdomain on /etc/mail/virtusertableI regenerated sendmail.cf by user m4 commandrestart sendmail service.When I ran: Mial -s test nagios4ccs@rogers.comIt did not prompt any error message , in the maillog it says the message is queued but It can not be sent out
View 3 Replies
View Related
Aug 30, 2010
This message was created automatically by mail delivery software. A message that you sent could not be delivered to one or more of its recipients. This is a permanent error. The following address(es) failed:
xx@xx.com
SMTP error from remote mail server after initial connection: host [URL] [ip address]: 550 Access denied...
View 6 Replies
View Related
Jun 25, 2011
the sendmail packages on my f15 server were updated from 8.14.4-20 to 8.14.5-1 yesterday. since then, every attempt to send mail via a smart relay have failed with :
Jun 25 14:05:10 server sendmail[23512]: p5PD59jr023512: from=root, size=208, class=0, nrcpts=1, msgid=<201106251305.p5PD59jr023512@server.{fromdom ain}>, relay=root@localhost
Jun 25 14:05:10 server sendmail[23513]: p5PD5A8l023513: from=<root@server.{fromdomain}>, size=480,
[code]....
i've tried using various different smtp relays and they all now throw the same error. without going through all my sendmail config, i have the following entries in /etc/mail/sendmail.mc :
define(`SMART_HOST', `{smtp server}')dnl
FEATURE(`authinfo', `hash /etc/mail/authinfo')dnl
and the /etc/mail/authinfo file contains :
AuthInfo:{incoming mail server} "U:{user}" "P:{password}"
View 1 Replies
View Related
Aug 30, 2010
This message was created automatically by mail delivery software. A message that you sent could not be delivered to one or more of its recipients. This is a permanent error. The following address(es) failed: xx@xx.com SMTP error from remote mail server after initial connection: host [URL] [ip address]: 50 Access denied...
View 4 Replies
View Related
Oct 15, 2009
I have installed F11 on my server bythis article! I have problem with certificatewhen I connectin from clients computers to my mail server for reciving mail! I have warning like this
View 2 Replies
View Related
Apr 8, 2010
How long normaly keep the mail server send mails on the outbox queue and try to send? What about hotmail, gmx and gmail mail server?
View 1 Replies
View Related
Aug 3, 2011
I am a bit of a linux newbie, but have been gradually teaching myself how to set up Sendmail 8.13.8 on a CentOS system to handle our MX mail for various domains we own on our local server. Configuration has gone well so far, except I cannot seem to get Outlook to authenticate with the SMTP server and I must readily admit to some large gaps in my knowledge. For testing purposes, I have tried to authenticate using Telnet with the following results:
Code:
220 my.domain.com ESMTP Sendmail 8.13.8/8.13.8; Wed, 3 Aug 2011 14:27:00 GMT
ehlo my.domain.com
250-my.domain.com Hello mytelnethost.btcentralplus.com [109.xxx.xxx.xx], pleased to meet you
250-ENHANCEDSTATUSCODES
[Code]...
View 7 Replies
View Related
Jul 5, 2011
How do e-mail clients know whether or not an e-mail is part of a thread? (For example, Thunderbird can fold e-mails into threads.) Do they just guess based on the Subject line, or do they know for certain based on an e-mail field? I was planning to tackle some more advanced filter programming on my Postfix server.
View 4 Replies
View Related
Apr 7, 2011
Im not able to find good response on this from google, urgent help required.
While im looking at my smtp server log at /var/log/maillog, im having these two errors for which im unable to find the reason.
1)Could not open inline file /etc/MailScanner/reports/en/inline.sig.txt, No such file or directory
2)did not issue MAIL/EXPN/VRFY/ETRN during connection to MTA
View 1 Replies
View Related
