I got everything working except any localhost connections from within the server. I've tried to connect using localhost, 127.0.0.1, and dedicated IP from within the server and several CMS sites I have moved over to the server and all the local host connections fail.
View 9 Repliesi have huawei usb stick modem, i'm connecting to internet with wvdial command, i have configured the file "wvdial.conf" to be able to connect, everything works fine i guess but the update applet still show me the message
Code:
Unable to check whether updates are available
connect to the internet and connection manager too .. it tell me i'm not connected, i think i must configure my connection in an other way .. but i don't know how ..
I have been trying to install Xubuntu 9.10 in an old desktop computer (Mobile AMD Duron, 213 Mb RAM) but the mouse doesn't work! Neither the Network connexion... When I boot with an USB (same OS) everything works fine... I can also boot with Puppy Linux (working in other partition) without any problem.
View 4 Replies View RelatedI have a pppoe adsl connection. When I disconnect and try to reconnect, network-manager keeps asking for my password. I type it again and again with no success. When I reboot, it works again. On ubuntu, I use pppoeconf and it works well. So on Fedora I made a connection with pppoe-setup but neither ifup nor
Code:
pppoe-connect
commands work. When I type
Code:
pppoe-connect
, it says
Code:
/usr/sbin/adsl-start: line 217: 13409 Terminated $CONNECT
"$@" > /dev/null 2>&1
. When I type
Ifup ppp0 doesn't work either. However, with exactly the same settings, ubuntu connects to the internet.
I deleted the firewall files "K09SuSEfirewall2_init", "K01SuSEfirewall2_setup", "S11SuSEfirewall2_setup" and "S01SuSEfirewall2_init" from "/etc/rc.d/rc5.d" in order to disable the firewall when rebooting.
As a consequence all network services are not working. I can't connect to any other machine nor to the internet.
I rebuilt the symbolic files based on the ones for runlevel 3, but still no network services are available.
Any suggestions how to make it work again? I'm using Suse 11.3.
I had work well with opensuse 11 and the internet also work well but when I turn off my computer and then use the XP and work with it. I find out the connection with the internet doesn't work in the opensuse 11. I made a repair and format to opensuse 11 but without any change the net still doesn't work.
CPU Pentium4
Motherboard Gigabyte intel 945 S-series
Dial up connection
I have no experience with opensuse.
I have a router working as an access point for Internet access. It is used by sveral computers. Wi-Fi connection to Internet through this router does not work after boot on openSUSE 11.4.The cannection becomes established, shows IP address, access point MAC address,the signal level is high. But Internet is unaccessible with traceroute returns"the host is unreachable" message.
If to disable the automatic start of the interface and start it manually with ifup wlan0, nothing changes: the interface still does not work after first start.This is very annoying because this laptop is use by a girl who cannot restart interface. She says she cannot do anything with it.
The main thing preventing me from going Linux although I have it installed in a multi-boot is the probelm I have with Reconnecting the Network (eth0)
If I reboot everything is fine and I am automatically connected to internet via my Ethernet_NAT_router/Homeplug_PowerLine/Cable_Router (using DHCP)
But if I manually disconnect the Network using the tray icon, or through the terminal, when I reconnect the Network Manager says I am reconnected but actually I am not connected to the internet. I can load my Cable Routers configuration page but pages beyond that in the outside world are accessible no longer...
To regain access I have to reboot.
The reason this is important for me is that I reckon if I could get this sorted then if I put the laptop to sleep it will will wake up and reconnect.
As it is using Linux sleep function is unworkable unless I don't mind losing internet.
I am determined to get this sorted eventually as I feel sure there must be a solution. My laptop isn't new but is a good workhorse.
Dell Inspiron 4100 / OpenSUSE Linux 11.2 Gnome
I'm trying to get my vsftp server to run. When ssl is disabled it works pretty fine, but after turning on I get the following error:
[Code]...
just downloaded Chromium, but the x button for closing a tab doesn't work. How can i fix it?
View 7 Replies View RelatedI have opensuse 11.1 Gnome on Lenovo S10e. I'm wanting to establish a mobile internet connection. I have tried so far...*UMTSMON but when I click on it nothing happens. I have reinstalled the program several times to no avail. *WINE to run the Optus program, however the program doesn't find the HUAWEI USB stick & *Via a Bluetooth connection (use mobile phone as a modem) didn't work either Anyhow, I have tried these and some other ways to get mobile to no avail.
Also, have gone to network connections-mobile broadband-add-configure it- but what am I forgetting to do? Need a path I can take to get mobile internet working. (I even have a direct SIM card slot in this laptop
we have here a few openSUSE-machines (some 11.1 and 11.2) which mounts their /home from a NFS-Server and imports the users via NIS. I now wanted to use X-Forwarding via SSH, but that doesn't work with NIS-Users.On my machine I use Gnome and my XAUTHORITY-Variable points to /var/run/gdm/auth-for-bup_deg-E3TMSz/database
Why isn't the default ~/.Xauthority-File used for my cookies? What do I have to change to get X-Forwarding in my Setup running?
I have an appliance called my_appliance.raw. To start the appliance locally, I use:
[code]...
After that I would like to ssh into the guest from the host but just the ssh command doesn't work. firewall is disabled on guest. the ip I use is the one that ifconfig shows when I run it on guest. sshd is running.
I've two computers with 1000Mbps cards, one opensuse 11.2 32 bits (AMD K7 over 1Ghz and 2MB RAM) and the other Opensuse 11.3 11.3 64 bits (single processor, 3GB). Both of the cards are configured with skge. The swith is an SMC 10/100/1000 and it reports connection at 1000Mbps on both cards. The i386 is a server and the other is a client.
I've in the client some directories of the server mounted by nfs.
I'm testing the connection copying long files (1GB for instance) and the copy reaches 14MBps at most, and most of the time it is more or less at 10MBps, which is too far from 1000Mbps.
It may be a problem of configuration? The switch is not good enough? or may be another kind of problem ?
I have a problem with one of my new OpenSuse installation. I install ntop on this machine so the port 3000 become open, but when i want to use it on a other pc, it cannot see the open port. I really don't understand why i cannot access this port.
I disabled firewall to make sure everything pass.
Here my ntop on my localhost
Nmap done: 1 IP address (1 host up) scanned in 0.07 seconds
Here my ntop from another host
Nmap done: 1 IP address (1 host up) scanned in 0.07 seconds
I had some fun here, with my local Cyrus IMAP daemon. I "updated" the machine to openSuse11.4 (from 11.2) by doing a fresh install. Because some of my involved HW here isn't capable of IPv6, I switched it off using yast2:
Netzwerkgeräte/Netzwerkeinstellungen [my translation: Network devices / Network Settings] Globale Optionen [global options] Removed the mark on "IPv6 aktivieren" [activate IPv6]
Then I had a hard fight with Cyrus IMAPd, mostly caused by user brain damage on my part... But one thing really looks like a problem on the Suse side of the fence: My /etc/hosts missed the "localhost"-entry for IPv4 ! This was the contents:
Code:
# special IPv6 addresses
::1 localhost ipv6-localhost ipv6-loopback
127.0.0.2 godot.site godot
[Code].....
I haven't seen this effect on 11.2 here and I haven't seen it on "my other" machine (running 64 bit version of Suse 11.4). But there I think IPv6 is still activated. I will check this, as soon as I get there.
Should this be reported as a potential bug in 11.4 ? Or is there some way, I could have messed up this. (No I didn't edit /etc/hosts by hand, before I corrected this thing)
This is a follow-on to "samba write failure crashes linux". It has the dmesg output when the write failure occurs.The remote server is os/2 v4.50 fp3.The failure occurred in this instance attempting to write a file from the localhost to a samba-mounted resource on a remote host. The failure always happens when at least 3 MB have been transferred. Smaller files are not a problem.
Other cases:
1. Saving any email (thunderbird) attachments to the localhost,
2. Downloading anything to the localhost using Firefox.
The most notable aspect are the phrases "kernel BUG" and "invalid opcode".
[Code]...
I recently installed OpenSUSE 11.3 amd64 from DVD on a new HP 625 Laptop. Whenever networking is activated, application startup slows down significantly. When I deactivate networking in the nm-applet application startup is fine. I am using the broadcom-wl package from packman for the broadcom wireless card (BCM4313)
View 9 Replies View RelatedI broke my apache server. I went into the Yast administrator / HTTP Server and enabled the "rewrite" module. The server stopped working so I went back in and disabled it. Now the server still doesn't work and when I try browsing to any of the sites on it all I see is a page that says "No database selected" for any sites using databases. For static sites I get a 404 error. I broke rule #1 and didn't have back-up configuration files so now I'm stuck. What could the Yast module have done to my configuration files? I have restarted apache several times and even re-booted the computer.
View 3 Replies View RelatedFreeNX server is SUSE 11.2 /(i586)
Cliente is windows 7 (64)
NX> 148 Server capacity: not reached for user: usb
I installed WordPress 3.x on my localhost/Apache server, but I can neither install plugins nor update anything.This happens with both the stable WP3.0 version and the 3.1 beta. When I try to search the Plugin Directory from the WP dashboard, I get this message: An Unexpected HTTP Error occurred during the API request.When I run an update, I get a page asking for the login credentials for the ftp user ("To perform the requested action, WordPress needs to access your web server. Please enter your FTP credentials to proceed. If you do not remember your credentials, you should contact your web host."). Since I'm part of the 'ftp' group on the system, I enter my system login information, click Proceed -- and get a blank page that does nothing.
I've gone to YaST, and I see that the system ftp user has a 6-character password (which may or may not be mine). I'm afraid to change it and risk screwing up other ftp-related functions. I'm running openSUSE 11.3, and am obsessive about updating. I will note that I have an old 2WIRE router that often requires me (including Zypper repos) to enter IP addresses instead of DNS-based URLs to successfully download stuff. Not sure if this is related, but just in case...
I recently tried out OpenDNS on my wired connection, however after it was slower than faster, I tried going back to the original settings that the connection had (so basically to Automatic DHCP).
For some reason the connection wouldn't connect again. So I thought I'd try deleting that connection and creating a new one, but this still doesn't work. When I try to connect using NetworkManager it just does the 'loading' icon for 30ish seconds then says disconnected.
My wireless still works fine however.
I'd very grateful as i'm worried i've messed up the ethernet port and I need it for when I got University in a couple of weeks
I've just upgraded to Ubuntu 11.04. Everything worked fine, until I rebooted. Now I can not connect to my home wireless internet, so I can't re-enable third party software sources. I am currently using a different computer, so I know that our internet works. I checked the wireless switch on my laptop, and it says that wireless is enabled. I've rebooted, and it still doesn't work. I tried our wired internet, and that didn't work either (although I'm not sure if our wired internet works; we haven't used it in a few years)
View 3 Replies View RelatedThese days I wanted to connect to the internet on my laptop using a wired connection. When I inserted the ethernet cable, I was surprised to see that it doesn't work on Ubuntu 11.04. So I decided to boot into Windows and see if it works or not. And I found that it works without problems on Windows.
View 2 Replies View Relatedi have wired connection(auto auth) , it was working till yesterday , but now its not working simplicity its not receiving to enter my name and password , its mikrotick hotspot .
ubuntu 11.04
I think I screwed up my Administrative username in mysql.
mysql -u root mysql
ERROR 1044 (42000): Access denied for user ''@'localhost' to database 'mysql'
Can I just copy all the files in /var/lib/mysql >>reinstall MySQL >> copy all the old folders into the new /var/lib/mysql ( while MySql is off)
I just installed Ubuntu on my windows pc with no problems....except for wireless that is. I have a USB Linksys WUSB54G adapter to access my 2WIRE, WEP network. The thing is, it shows up in the top right hand corner. It even gives me the signal strength. But when it comes to using Mozilla, it is never able to access a page. If I try to Ping something, it's unable to. So I thought maybe I need to use ndiswrapper with my .inf and .sys files from the driver for my windows. I installed it, and added the driver to it...everything went O.K. I check it and it says it's installed and working. Again, I can see the wireless networks, and "connect" but when I try to use the connection there is nothing. I have also tried my neighbours non-WEP connection, but it still doesn't work. So I'm sort of at a loss with what I should do now. I see the networks, can "connect" but can't browse. I installed the drivers from my windows, and it still doesn't work. I used a LIVE CD of Knoppix and I can connect to the Network within 30 seconds and start browsing the net.
View 2 Replies View RelatedI am working on ubuntu (Xubuntos) using VMware virtual machine. when I enter apt-get update it gives following error;
Code:
xubuntos@xubuntos-tinyos:~$ sudo apt-get update
Code:
Err http://tinyos.stanford.edu edgy Release.gpg
Cannot initiate the connection to 3127:80 (0.0.12.55). - connect (22 Invalid argument)
Err http://tinyos.stanford.edu edgy/main Translation-en_US
[Code]...
I have installed Ubuntu 11.04 using Wubi through Windows 7. It seems to be working but it will not connect to my wired internet connection. It tells me there is no wired connection, when there is. I used sysinfo and its not showing any network adapter or controller. I have a board with nvidia nforce go 430, could it be a driver issue. It works fine in windows though. Tried using a wireless adapter and all is working. But why doesn't the wired ethernet connection work.
View 9 Replies View RelatedI have the "Work Offline" problem: when I boot up, the icon on the toolbar tells me I have "No network connection". This is not quite true, since I can access the first page of any website - only subsequent pages are inaccessible. I get a message saying that Firefox is offline. However, when I uncheck "Work Offline" in the File menu, it makes no difference to this behavior.
The problem is on my Ubuntu Dell desktop, which is connected to the internet with cable broadband via a D-Link router (wired connection). It has worked fine up till now. I use Ubuntu 10.04 and Firefox 3.6.11. I am writing this on my Ubuntu Dell laptop which is wired to the same router, so I assume the problem is not the router. I have tried various strategies suggested in threads on these forums, including editing about:config, changing "allow" to "deny" in some lines of /etc/dbus-1/system.d/NetworkManager.conf and changing from Automatic (DHCP) to Automatic (DHCP) Addresses only, but no luck so far. The contents of ifconfig are:
eth0
Link encap:Ethernet HWaddr 001:aa0:91:a7:51
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets: 0 errors: 0 dropped: 0 overruns: 0 carrier: 0
collisons: 0 txqueulen: 1000
RX bytes: 0 (0.0 B) TX bytes: 0 (0.0 B)
[Code]...
If I comment out "auto eth0" as well, it makes no difference. If I uncomment both lines ("auto eth0" and "iface eth0 inet dhcp") then I lose the internet connection altogether.