Ubuntu Networking :: Doesn't The Wired Ethernet Connection Work
Jul 25, 2011
I have installed Ubuntu 11.04 using Wubi through Windows 7. It seems to be working but it will not connect to my wired internet connection. It tells me there is no wired connection, when there is. I used sysinfo and its not showing any network adapter or controller. I have a board with nvidia nforce go 430, could it be a driver issue. It works fine in windows though. Tried using a wireless adapter and all is working. But why doesn't the wired ethernet connection work.
View 9 Replies
ADVERTISEMENT
Jul 24, 2010
I have a HP Mini running Ubuntu Desktop 10.04, and I cannot get a wired connection to work. My network card is "Broadcom Corporation BCM4312 802.11b/g (rev 01)", and I have the restricted drivers for the card installed. Wireless works fine, though.
My /etc/network/interfaces:
View 4 Replies
View Related
Sep 18, 2010
I recently tried out OpenDNS on my wired connection, however after it was slower than faster, I tried going back to the original settings that the connection had (so basically to Automatic DHCP).
For some reason the connection wouldn't connect again. So I thought I'd try deleting that connection and creating a new one, but this still doesn't work. When I try to connect using NetworkManager it just does the 'loading' icon for 30ish seconds then says disconnected.
My wireless still works fine however.
I'd very grateful as i'm worried i've messed up the ethernet port and I need it for when I got University in a couple of weeks
View 1 Replies
View Related
Jul 6, 2011
These days I wanted to connect to the internet on my laptop using a wired connection. When I inserted the ethernet cable, I was surprised to see that it doesn't work on Ubuntu 11.04. So I decided to boot into Windows and see if it works or not. And I found that it works without problems on Windows.
View 2 Replies
View Related
Nov 30, 2010
Just noticed that auto connection to my wired ethernet is not being established after restarts I'm making. Never recall this in the past. I do get an auto connect when I shutdown and restart. I'm using 10.04 LTS Lucid Lynx.
Also have noticed that nearly every upgrade over the past week or so is calling for restart to complete the upgrade. Can there be any unwanted problems in doing several upgrades over a period of several days before doing the restart? I'd like to think not.
As you can imagine these two issues together are causing some lost time.
View 5 Replies
View Related
Jul 24, 2011
I have two laptops (Dell & Lenovo), both have wifi.
I am having one wired Ethernet connection.
I want to share this Internet connection among two system , to access Internet from both the system.
I had tried by creating a wireless network, but was not able to do so.
View 3 Replies
View Related
Jul 2, 2011
I've got Puppy Linux on a USB key, and yesterday, while I was on the internet with it, it hanged. I didn't know what to do, and I rebooted from the button (I now know what to do ). The problem is that, after rebooting, Puppy doesn't recognise the router. I've tried to apply the drivers that are on Puppy, but there aren't any compatible.
My router is a Xavi 7968 and my Network Card is:
NIC Fast Ethernet PCI Familia RTL 8139 from Realtek
(On Realtek's website, there isn't any driver linux-compatible)
View 7 Replies
View Related
Jun 13, 2010
laptop: averatec 6200 series
ethernet driver: SiS 900
wirless lan driver: rt2500
I got 10.04 installed and running pretty well.I cant get the wired ethernet to work but the wireless works. i did the the command line
[Code]...
also, dont know if i matters but ive got 8mbps/1.5mbps cable (motorala surfboard cable modem) and a linksys wrt54g wireless router.
View 4 Replies
View Related
Oct 6, 2010
while my brother was browsing the web on my windows partition he had a blue screen pop up, one of the soft/hardware error ones, not a true BSOD, anyways, ever since my lan port on the computer seems to not be activiating as no wired connection is recognized. The lan port/card is directly attached to the Mother Board, it's a gigabyte motherboard in a self-build computer. I'm just wondering if there's anything I can do to troubleshoot this and see if it is truly a hardware problem or if its something else.
View 9 Replies
View Related
Dec 5, 2010
I have just installed ubuntu 10.04 using the wubi installer to dual-boot my machine. Under ubuntu, I am not able to connect to the internet or my router. Everything works fine under windows. I have tried to find relevant information in the forums, but nothing seems to work for me. I have tried disabling ipv6, setting a static ip, but no go. ifconfig shows no IP, dhclient results in no DHCP offers and pinging my router's IP results in Network is Unreachable.
View 9 Replies
View Related
Aug 1, 2010
I'm running an up-to-date Fedora 12 machine with the Gnome desktop (meaning with Network Manager). My network connection is a wired ethernet to a switch which then connects to a Netgear router. For some reason, this machine can't renew its leases with DHCP, so NetworkManager deactivates eth0, taking my machine off the network. I have to click Network Manager and enable eth0, which seems to work every time.
How can I fix it? Here are the relevant bits from /var/log/messages showing a failed DHCP request and then the successful renewal.
Code:
Aug 1 04:00:08 ironton dhclient[12452]: DHCPREQUEST on eth0 to 192.168.1.1 port 67
Aug 1 04:00:08 ironton dhclient[12452]: DHCPNAK from 192.168.1.1
Aug 1 04:00:08 ironton NetworkManager[1261]: <info> (eth0): DHCPv4 state changed reboot -> expire
Aug 1 04:00:08 ironton NetworkManager[1261]: <info> (eth0): device state change: 8 -> 9 (reason 6)
Aug 1 04:00:08 ironton NetworkManager[1261]: <info> Marking connection 'System eth0' invalid because IP configuration expired.
[Code]...
View 5 Replies
View Related
Jun 5, 2010
I have a Zotac Ionitx A-U. I can't get it to establish an internet connection with the wired ethernet within Ubuntu. The chip is detected, but trying to bring up the connection stalls out at trying to obtain a DHCP lease, like this:
DHCP DISCOVER ...
DHCP DISCOVER ...
No DHCPOFFERS received
Specs:
Ionitx A-U
Ubuntu 10.04 x64 kernel 2.6.32-22 (also didn't work in 9.10)
[Code]...
View 3 Replies
View Related
Mar 19, 2011
Using 10.10 and have a wired connection that according to the system is connected, but when I open a browser I can't connect to any sites. What am I missing here? I can't for the life of me figure this out.
View 6 Replies
View Related
Jan 18, 2010
I recently purchased an Acer Aspire 1410 notebook running Windows 7 home edition. I installed Ubuntu 2.3 and my wireless and network LAN connection is not working. I saw on a link in this forum, someone was having similar problem. However, when i tried the solution that was recommended/suggested to the person, it did not work for me.
what I can do to get my wireless and wired connection to work?
View 9 Replies
View Related
Feb 8, 2010
We finally got internet in our apartment in China, but my husband was the only one home when the guy came to set it up (on his windows machine).
He connects by plugging in, then clicking a desktop icon labeled "Broadband Connection" where a box pops up with a username, a password box, and some buttons, one of which says "connect".
I am trying to figure out how to set this up on my netbook so that I can use the internet at home too. I have a feeling that even if I had been home when the setup guy came, he wouldn't have had a clue what to do with mine anyway.
On the WinXP machine: Connection Properties state that this is a PPPoE connection, with TCP/IP, QoS, and Deterministic Network Enhancer all checked. Under the security tab, unsecured passwords are allowed.
View 6 Replies
View Related
Mar 21, 2011
I am having difficulties connecting to my router with my Ubuntu 10.04 laptop. Wireless works fine and I can get a wired connection when I boot into Windows 7. In Network Connections there is no Auto eth0 listing and when I create a wired connection, as soon as I enter details, the 'Apply' button grays out! Am I missing some permissions?
Here is some terminal output:
ifconfig
Code:
eth0 Link encap:Ethernet HWaddr 00:23:5a:d2:1f:13
inet addr:192.168.1.67 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::223:5aff:fed2:1f13/64 Scope:Link
[Code]...
View 9 Replies
View Related
May 4, 2010
I installed Ubuntu10.04, It cannot driver Wired network and wireless. Later I installed linuxMint9, wireless is ok, but wired network doesn't work. I am sure the lan cable is ok. It works in Windows.
View 3 Replies
View Related
Feb 14, 2011
what is the command to restart the network services? ive forgotten i think it uses -hup switch though. about 1 in 20 boots on my desktop ubuntu system results in the system insisting its no longer on a network yet has a fully functioning network card. a reboot always fixes the issue but that doesnt seem like a long term solution to me. If I ping a neighbouring system I get nothing. (sent packet count increases in ifconfig) If I ping from a neighbouring system back to my desktop I get nothing (no change in packet count) I can bring down and back up the network interface with no results. A sniffer shows the system definitely isnt sending anything out Everything worked previous boot and will work again after a reboot.
View 2 Replies
View Related
Oct 11, 2010
I am unable to get my wired network connection to work. My laptop sees the wired connection, but will not connect. I am running 10.04 on aLenovo T400 with 3 gb of ram.
View 7 Replies
View Related
May 1, 2011
I cant get my wired internet connection to work. The command 'dpkg -s pppoeconf' returns ' installed ok installed'. My connection is through a router which is probably in a semi-bridge mode and I need to dial a connection to get the net started. The connection Auto eth0 is setup properly with the correct cloned MAC Address (that of my laptop).
I've also executed 'sudo pppoeconf' and ran the whole series of steps which towards the end said that my connection will be set on boot. However, the net doesnt work directly and I dont know how to dial manually either. 'sudo ifup eth0' returns 'interface eth0 already configured'. I tried some 10-15 threads but none worked. Ubuntu is handicapped without internet.
View 2 Replies
View Related
Dec 6, 2010
My desktop PC has 2 NICs. I have Ubuntu on it since several years, and I remember that both eth0 and eth1 used to work. However, I discovered recently that currently only eth0 works, and eth1 is dead, but I don't know why. It's been a while since I've tried eth1, so I have no idea when exactly it broke. I suspect the problem may be related to the fact that the MAC address is incorrect: it is set to 00:00:00:00:00:00, which seems wrong. But I have no idea how this happened...Any idea what might be wrong and how I can fix it? Here is some output which I think is useful:
Code:
peter@cheetah:~$ ifconfig -a
eth0 Link encap:Ethernet HWaddr 00:18:f3:68:42:78
[code]....
View 9 Replies
View Related
Jan 14, 2010
As of now, my internet works fine when connected with an ethernet cable.The problem is it doesnt seem like my wireless is working at all.The led light is orange, (its usually blue when it connects) and I cannot see my home dsl network.Is thereany specific troubleshooting steps I should take?HP dv6000 laptopwireless card: Broadcom Corporation BCM4311 802.11b/g WLAN
View 6 Replies
View Related
Mar 7, 2010
I got a problem about network proxy setting. With the graphics setting interface, I set auto proxy with the URL address but it is weird that the setting only work with eth1(wireless), doesn't work with etho(wired). however my wireless driver is always a problem for Linux. i also tried export http_proxy= XXXXX:8080 it still doesn't work at all.
View 2 Replies
View Related
Apr 18, 2011
After i install it i lost my internet connection . i got a message " Wired Network " " you work offline ". i use cable ADSL ,.... my Pc information HP Pavilion 6700 running with both Window 7 & Ubuntu 10.10 note... my network connection work correctly on W7.
View 1 Replies
View Related
Feb 23, 2011
I'm currently running Fedora 13, after I updated the kernel to 2.6.34, I have to run (as a superuser) "service NetworkManager start" in order to start my network manager, is there are way I can run this on startup?
Also my ethernet connection seems to only work when I restart/boot up my computer, when I wake my computer up from being asleep, the ethernet stops working.
View 2 Replies
View Related
May 2, 2015
I'm using a wired ethernet dongle due to my machine not having an ethernet port, however it sometimes drop connection, how can I diagnose whether if the dongle is faulty or my system is having trouble maintaining a connection.
View 14 Replies
View Related
Feb 16, 2011
I'm having mysterious wired network problem with my Karmic/9.10 machine. It hasn't been in network a while, but now I finally got the cabling done. I can't get the IP from dhcp server (TW-EA510), and static settings doesn't work either. Fresh cabling showed OK 1Gb connection on tester, and win7 laptop works fine. I even tried with long cable though the rooms, but it doesn't help, so it definately isn't the new cabling.
Log from the router after issuing #"dhclient":
Feb 16 23:01:43 DHCP SERVER: DHCPDISCOVER from 00:01:29:fb:c5:d1 via br0
Feb 16 23:01:43 DHCP SERVER: DHCP offer to 00:01:29:fb:c5:d1
Feb 16 23:01:49 DHCP SERVER: DHCP request from 00:1b:ea:c8:a0:ba
Feb 16 23:01:49 DHCP SERVER: DHCP ack to 00:1b:ea:c8:a0:ba
Feb 16 23:01:54 DHCP SERVER: DHCPDISCOVER from 00:01:29:fb:c5:d1 via br0
Feb 16 23:01:54 DHCP SERVER: DHCP offer to 00:01:29:fb:c5:d1
Feb 16 23:02:03 DHCP SERVER: DHCPDISCOVER from 00:01:29:fb:c5:d1 via br0
[Code]....
Motherboard is some old Lanparty with two ethernet ports, NVidia CK804 and Marvell 88E800 rev 13 Gigabit netwok adapters, neither of them works. At least another of them has been worked earlier when I last got it wired. It's been a while, so I'm not sure which one of them and with different router if that matters.
View 3 Replies
View Related
Nov 13, 2010
I've recently bought a recycled computer for my office. The plan was to get an old cheap computer and use it to write LaTex documents but nothing else. However, I can't seem to get the thing to connect to the internet. I'm on a University network which has a funny setup but I don't think that's the problem.So here's the deal. I have tried this with 9.04, 10.04 and 10.10 and it hasn't worked. The computer recognizes the ethernet cable. If I issue the command "sudo mii-tool eth0" and get back "eth0: negotiated 100baseTx-FD, link ok". However, click on the networking logo on the top right, and click auto eth0, it tries to connect for about 30 seconds, then gives up. Unfortunately I'm pretty clueless when it comes to networking so I have no idea what to do to try to fix this.
View 8 Replies
View Related
May 11, 2010
It was working just fine, until the other day I yanked it out. The wireless works just fine on the same router. If I login to a windows 7 instance on this dual boot laptop then the ehternet works just fine. So it's not a hardware, cable or router issue. The card even gets an ip, but I can't connect to the internet.
View 2 Replies
View Related
Jun 7, 2010
I just installed Ubuntu on my windows pc with no problems....except for wireless that is. I have a USB Linksys WUSB54G adapter to access my 2WIRE, WEP network. The thing is, it shows up in the top right hand corner. It even gives me the signal strength. But when it comes to using Mozilla, it is never able to access a page. If I try to Ping something, it's unable to. So I thought maybe I need to use ndiswrapper with my .inf and .sys files from the driver for my windows. I installed it, and added the driver to it...everything went O.K. I check it and it says it's installed and working. Again, I can see the wireless networks, and "connect" but when I try to use the connection there is nothing. I have also tried my neighbours non-WEP connection, but it still doesn't work. So I'm sort of at a loss with what I should do now. I see the networks, can "connect" but can't browse. I installed the drivers from my windows, and it still doesn't work. I used a LIVE CD of Knoppix and I can connect to the Network within 30 seconds and start browsing the net.
View 2 Replies
View Related