OpenSUSE Network :: Instance Attempting To Write A File From The Localhost?
Jan 17, 2010
This is a follow-on to "samba write failure crashes linux". It has the dmesg output when the write failure occurs.The remote server is os/2 v4.50 fp3.The failure occurred in this instance attempting to write a file from the localhost to a samba-mounted resource on a remote host. The failure always happens when at least 3 MB have been transferred. Smaller files are not a problem.
Other cases:
1. Saving any email (thunderbird) attachments to the localhost,
2. Downloading anything to the localhost using Firefox.
The most notable aspect are the phrases "kernel BUG" and "invalid opcode".
[Code]...
View 1 Replies
ADVERTISEMENT
Oct 3, 2010
I have a machine installed Red Hat Linux 8.I have installed xampp-linux-1.7.3a.tar. I've finished installing lampp start.But it still does not understand why when I use the website notice:"connection was refused when attempting to contact localhost".
View 4 Replies
View Related
Jun 4, 2010
I had set up a Samba server on SuSE linux a few years ago with a single shared directory. It has been running fine ever since, surviving various system upgrades and hardware migrations without ever needing to change the configuration (well, maybe once or twice). However, since a few weeks ago, it refuses write access to the share. It just returns NT_STATUS_ACCESS_DENIED when I try to create or write to a file. That's also what /var/log/samba/log.smbd says (nothing more AFAICT). It's the same for all clients, i.e. remote Win XP PCs or local smbclient.
The funny thing is that it allows write access immediately after rebooting the server, but after a while (the next day or so) it refuses again. Restarting smbd or nmbd doesn't change anything here. I suspect that this started after installing the latest security updates for OpenSuSE 11.2 on May 17th. The new packages were (according to /var/log/zypper.log):
xorg-x11-libXext-2379.noarch
libmysqlclient-devel-2315.noarch
openSUSE-build-key-2398.noarch
libpython2_6-1_0-2213.noarch
libpng-devel-2159.noarch
Somehow I can't see which of these might have an influence on samba. But I am absolutely and positively sure that I didn't change anything else. I logged into the server only once in months, and all I did was doing the updates using the updater applet.
View 3 Replies
View Related
Nov 8, 2010
I have installed opensuse 11.3 64 bit. For many years was able to connect to a file server within our domain via konqueror in all previous versions of opensuse using: smb://user@server.ip.adress/userdata/user_name/
This would ask me a password and then I would be able to move, read, create and delete files. I never configured samba on the linux client because this method always worked. However very recently (I suspect since I installed 11.3) I am facing a problem I cannot resolve. I can still log in, browse the remote folder, read files, create new ones (for example a txt file), delete them, but I cannot copy into that remote folder files larger than about 20KB (I try copying or moving files by dragging them from my desktop into the konqueror window that shows the remote folder contents).
Small files are OK, but for files are larger than ~20KB there is an error saying: Could not write to file smb://{path_to_my_file_in_the_remote_folder}. Strangely, the file is nevertheless created in the remote folder, but with a fixed length size of 32KiB.
View 2 Replies
View Related
May 19, 2011
I'm just trying to do simple name-based virtual hosting (different domains/content, same IP).
What I've done is uncomment the "NameVirtualHost *:80" line in listen.conf. Then I have one file "domain.conf" in vhosts.d/ with:
Code:
<VirtualHost *:80>
ServerName www.domain1.com
DocumentRoot /srv/www/htdocs/domain1
<Directory "/srv/www/htdocs/domain1">
[Code]....
View 9 Replies
View Related
Jun 9, 2010
I'm running
Opensuse 11.2
Kernel Linux 2.6.31.12-0.2-desktop
GNOME 2.28.2
I have an instance of Nautilus File Browser that will not close or be killed, and it always opens to the same directory, kdenlive in my home directory.
Rebooting, logging out and in as someone else, then logging back in again as myself doesn't stop it. And, I'm afraid to uninstall Nautilus. I've tried Re-installing it to no avail.
View 4 Replies
View Related
Apr 15, 2010
I have a problem with one of my new OpenSuse installation. I install ntop on this machine so the port 3000 become open, but when i want to use it on a other pc, it cannot see the open port. I really don't understand why i cannot access this port.
I disabled firewall to make sure everything pass.
Here my ntop on my localhost
Nmap done: 1 IP address (1 host up) scanned in 0.07 seconds
Here my ntop from another host
Nmap done: 1 IP address (1 host up) scanned in 0.07 seconds
View 2 Replies
View Related
Jun 28, 2011
I had some fun here, with my local Cyrus IMAP daemon. I "updated" the machine to openSuse11.4 (from 11.2) by doing a fresh install. Because some of my involved HW here isn't capable of IPv6, I switched it off using yast2:
Netzwerkgeräte/Netzwerkeinstellungen [my translation: Network devices / Network Settings] Globale Optionen [global options] Removed the mark on "IPv6 aktivieren" [activate IPv6]
Then I had a hard fight with Cyrus IMAPd, mostly caused by user brain damage on my part... But one thing really looks like a problem on the Suse side of the fence: My /etc/hosts missed the "localhost"-entry for IPv4 ! This was the contents:
Code:
# special IPv6 addresses
::1 localhost ipv6-localhost ipv6-loopback
127.0.0.2 godot.site godot
[Code].....
I haven't seen this effect on 11.2 here and I haven't seen it on "my other" machine (running 64 bit version of Suse 11.4). But there I think IPv6 is still activated. I will check this, as soon as I get there.
Should this be reported as a potential bug in 11.4 ? Or is there some way, I could have messed up this. (No I didn't edit /etc/hosts by hand, before I corrected this thing)
View 2 Replies
View Related
Feb 25, 2011
I got everything working except any localhost connections from within the server. I've tried to connect using localhost, 127.0.0.1, and dedicated IP from within the server and several CMS sites I have moved over to the server and all the local host connections fail.
View 9 Replies
View Related
Feb 27, 2011
I recently installed OpenSUSE 11.3 amd64 from DVD on a new HP 625 Laptop. Whenever networking is activated, application startup slows down significantly. When I deactivate networking in the nm-applet application startup is fine. I am using the broadcom-wl package from packman for the broadcom wireless card (BCM4313)
View 9 Replies
View Related
Jun 25, 2010
FreeNX server is SUSE 11.2 /(i586)
Cliente is windows 7 (64)
NX> 148 Server capacity: not reached for user: usb
View 4 Replies
View Related
Nov 25, 2010
I installed WordPress 3.x on my localhost/Apache server, but I can neither install plugins nor update anything.This happens with both the stable WP3.0 version and the 3.1 beta. When I try to search the Plugin Directory from the WP dashboard, I get this message: An Unexpected HTTP Error occurred during the API request.When I run an update, I get a page asking for the login credentials for the ftp user ("To perform the requested action, WordPress needs to access your web server. Please enter your FTP credentials to proceed. If you do not remember your credentials, you should contact your web host."). Since I'm part of the 'ftp' group on the system, I enter my system login information, click Proceed -- and get a blank page that does nothing.
I've gone to YaST, and I see that the system ftp user has a 6-character password (which may or may not be mine). I'm afraid to change it and risk screwing up other ftp-related functions. I'm running openSUSE 11.3, and am obsessive about updating. I will note that I have an old 2WIRE router that often requires me (including Zypper repos) to enter IP addresses instead of DNS-based URLs to successfully download stuff. Not sure if this is related, but just in case...
View 1 Replies
View Related
Jan 24, 2010
I have a Karmic server install on which I've set up a network drive mapping to a NAS (CIFS). I'm having trouble with automounting the disk though, as (from what I can tell) the disk is attempting to mount before the network is up.dmesg shows the following:
Code:
[ 10.421192] lirc_dev: lirc_register_driver: sample_rate: 0
[ 10.427116] lirc_mceusb[2]: Topseed Technology Corp. eHome Infrared Transceiver on
[code]...
View 2 Replies
View Related
Nov 9, 2010
I think I screwed up my Administrative username in mysql.
mysql -u root mysql
ERROR 1044 (42000): Access denied for user ''@'localhost' to database 'mysql'
Can I just copy all the files in /var/lib/mysql >>reinstall MySQL >> copy all the old folders into the new /var/lib/mysql ( while MySql is off)
View 9 Replies
View Related
Feb 15, 2010
I have KDE 4.4 and Firefox 3.6. Whenever I click a link from a plasmoid widget, it tries to open Konqueror and another instance of Firefox. The page actually loads in the opened Firefox window, but the task bar shows an instance of Konqueror and another instance of Firefox, that keeps loading for a while then close. See image below:
I currently have setup the browser default application as "firefox". If I set this option to use the default application, it opens in Konqueror and I don't see additional windows in the task bar. If I change the option to "firefox %u", then it exhibit the same issue, but the process is much faster, so the loading windows don't stay for long in the task bar. Additionally, it opens the link on a new Firefox window and opens the page twice. Although Konqueror is not loaded, the bouncing icon next to the mouse pointer shows up and stay for a while.
View 1 Replies
View Related
Jun 29, 2010
i have client and server PCs, both with openSuse 11.2.
on the server side, i have mounted HD partition to /vmshare dir. relevant line in /etc/fstab reads:
Code:
/dev/disk/by-id/ata-WDC_WD3200AAJS-07B4A0_WD-WCAT16493946-part2 /vmshare reiserfs user,acl 1 2
i want to export /vmshare dir via nfs. i have configured it through yast and resulting line in /etc/exports reads:
Code:
/vmshare *(rw,root_squash,sync,no_subtree_check,crossmnt)
the permissions for this directory is drwxrwxr-x root vmshare.
i can successfully mount the exported dir on client side, i can move between directories and list contents, but i can't write into it (not even as a root). on the server side, i can write to the directory only as root. the vmshare group is created on both machines with same gid as well as all users have same uids. firewalls are down.y.
View 3 Replies
View Related
Sep 15, 2011
Using SuSE 11./4 on two machines. Successfully set up a server to share a folder. The client is able to read files from the folder, but not write to them.the client perspective, the shared folder permissions are read and write if owner, read only for all otherHowever, the server shared folder has been set up for sharing, and the permissions are set for read and write to all.
One more thing. When the client goes into the samba share, it sees the workgroup. Clicking into that, it sees the name of the server computer. Clicking into that,it sees two folders: "profiles" and "users". Clicking into "users" goes into the shared folder. I tried setting the permissions from the client side on the "users" folder using root privileges to allow reading and writing without any success
View 6 Replies
View Related
Jan 24, 2010
I have installed my Konica Minolta mc 2430dl printer (opensuse 11.2 x64).
View 2 Replies
View Related
Feb 13, 2010
I'm using openSUSE 11.2 (GNOME), When I go to yast and if I try configuring Fingerprint Reader or Windows domain membership I get the following error
Code:
Cannot write PAM settings
I want to understand whether its a bug or something related to configuration. When I
[code]...
View 2 Replies
View Related
Nov 8, 2010
I had installed UEC 10.04. It is a 2 server configuration with CC, CLC, SC and Walrus on one server and NC on another server. I could run instance of images, But when i try to ssh to the instance, it doesn't work.
It shows ssh: connect to host xxx.xxx.xxx.xxx port 22: No route to host. This to me seems there is a problem with my network connection. Pl find below the ifconfig output of the two servers:
Controller:
eth0 Link encap:Ethernet HWaddr 00:0c:29:90:95:17
inet addr:172.18.144.36 Bcast:172.18.145.255 Mask:255.255.254.0
inet6 addr: fe80::20c:29ff:fe90:9517/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
[Code]...
View 3 Replies
View Related
Oct 29, 2010
After upgrading from 9.10 to 10.04, a hundred or so of (for example)
Code:
error (network unreachable) resolving '14.42.117.203.in-addr.arpa/PTR/IN': 2001:500:13::c7d4:35#53: 1 Time(s)
messages appear in syslog each day. Each URL has from 2 - 6 attempts at various ipv6 addresses. My question is why is bind9 trying to resolve ipv6 addresses? I have done nothing to enable or disable ipv6 and thought that if not explicitly enabled I would not have to be concerned with it.
View 1 Replies
View Related
Mar 9, 2011
I am having a terrible time getting any networking to work with a new RedHat Enterprise 6 64 bit install. I am installing on an HP Proliant DL380G7.I have downloaded the driver - hp-netxtreme2-6.2.23-2.src.rpm from the HP website.Followed directions and did the following:1.Build Environment Setup - installed redhat-rpm-config and kernel-devel2.Installed the source (hp-netxtreme) rpm.3. Build the Binary RPM - installed rpm-build and ran the following:rpmbuild -bb /root/rpmbuild/SPECS/hp-netxtreme2.specIt runs through the build process and near the end I get the following:make -C /lib/modules/2.6.3271.el6.x86_64/build UBDIRS=/root/rpmbuild/BUILD/hpnetxtreme26.2.23/obj/default/bnx2-2.0.23b/src modulesexpr: syntax erromake[2]: Entering directory '/usr/src/kernels/2.6.32-71.el6.x86_64'/usr/src/kernels/2.6.32-1.el6.x86_64/arch/x86/makefile:81: stack protector enabled but no compiler supportmake[2]: gcc: command not found
make [3]: ***[/root/rpmbuild/BUILD/hp-netxtreme2-6.2.23/obj/default/bnx2-2.0.23b/src/bnx2.o] Error 127make[2]: ***[_module_/root/rpmbuild/BUILD/hp-netxtreme2-6.2.23/obj/default/bnx2-2.0.23b/src] Error 2make[2]: Leaving directory '/usr/src/kernels/2.6.32-71.el6.x86_64'
[code].....
View 2 Replies
View Related
Nov 17, 2009
Ive installed Gaussian '03 on fedora Core 10, but I'm unable to run it. It aborts and i get the following error
Code:
Erroneous write during file extend. write -1 instead of 4096
Probably out of disk space.
Write error in NtrExt1
View 3 Replies
View Related
Mar 21, 2010
(Using Lenny.) And where is the VLC manual? Help button just has "about". Synaptic must have it under some other name than vlc doc or vlc manual.
Back-ground... just inherited moderate amount audio files, the mp3 files would play and wma files would not play. Installed ffmpeg, not sure if that fixed it.
1. selecting a music file in the directory will start a new instance of VLC, even when there already is one(vlc panel) displaying.
2. Selecting a wma file will start a new instance of VLC with no sound. However, using the VLC file menu and selecting a wma file from a directory will play sound (sounds pretty good too for cheap speakers).
3. Not sure what I did, but now the VLC is playing every tune in the whole directory, { cool, I discovered how to play tunes all day} but closing the VLC pane doesn't turn off the music. Or at least tell me how to turn off the player.
View 4 Replies
View Related
Jun 8, 2010
I recently set up a Linux VPS and installed JDK 6u20 on it; I tried running a class and here's the result
Code...
The file "Server.class" is in the location I specified - why am I still getting the error?
View 3 Replies
View Related
Apr 19, 2011
If a file is opened from the common prompt with something like:
gedit somefile &
Is there a way to close somefile while leaving the instance of gedit still open? My idea is that sometimes I will have more than one file open in gedit. I run a script daily that updates to a log file. The log file is then opened and viewed with gedit.
View 5 Replies
View Related
May 13, 2009
I recently installed Gentoo on my desktop & have been attempting to get Xorg working properly.
I ran the "Xorg -configure" tool, but when attempting to test the configuration file by using X (X -config /root/xorg.conf.new), X starts properly & I see the dotted black / white screen & X cursor.
The issue is that I have no keyboard or mouse input (I tried this with 2 separate keyboards, one USB & one PS2. My PS/2 keyboard LED's actually turned off when testing X).
Basically, I need to restart my system whenever I attempt to test my Xorg.conf.
I checked the file (don't currently have it accessible, as I'm at work), and found nothing wrong with the configuration.
View 2 Replies
View Related
Jun 9, 2010
I'm running
Opensuse 11.2
Kernel Linux 2.6.31.12-0.2-desktop
GNOME 2.28.2
I have an instance of Nautilus File Browser that will not close or be killed, and it always opens to the same directory, kdenlive in my home directory. I'm a newbie and have already googled. Rebooting, logging out and in as someone else, then logging back in again as myself doesn't stop it. And, I'm afraid to uninstall Nautilus. I've tried Re-installing it to no avail.
View 4 Replies
View Related
Feb 28, 2010
how to stop the instance before shutting down. I tried dbstop and oracle stop, but neither work.
View 5 Replies
View Related
Oct 23, 2010
Is there any way to make Dragon Player so there is just one running instance of it at a time? Like if i have something playing and i click on something else to play have it so that the instance currently running changes to the new file instead of opening a new window?
View 1 Replies
View Related
