OpenSUSE Network :: Update Applet Doesn't Work With Connection
Apr 5, 2010
i have huawei usb stick modem, i'm connecting to internet with wvdial command, i have configured the file "wvdial.conf" to be able to connect, everything works fine i guess but the update applet still show me the message
Code:
Unable to check whether updates are available
connect to the internet and connection manager too .. it tell me i'm not connected, i think i must configure my connection in an other way .. but i don't know how ..
View 5 Replies
ADVERTISEMENT
Feb 25, 2011
I got everything working except any localhost connections from within the server. I've tried to connect using localhost, 127.0.0.1, and dedicated IP from within the server and several CMS sites I have moved over to the server and all the local host connections fail.
View 9 Replies
View Related
Jan 3, 2011
I am working on ubuntu (Xubuntos) using VMware virtual machine. when I enter apt-get update it gives following error;
Code:
xubuntos@xubuntos-tinyos:~$ sudo apt-get update
Code:
Err http://tinyos.stanford.edu edgy Release.gpg
Cannot initiate the connection to 3127:80 (0.0.12.55). - connect (22 Invalid argument)
Err http://tinyos.stanford.edu edgy/main Translation-en_US
[Code]...
View 2 Replies
View Related
Feb 27, 2010
I have been trying to install Xubuntu 9.10 in an old desktop computer (Mobile AMD Duron, 213 Mb RAM) but the mouse doesn't work! Neither the Network connexion... When I boot with an USB (same OS) everything works fine... I can also boot with Puppy Linux (working in other partition) without any problem.
View 4 Replies
View Related
Mar 24, 2010
My kupdate-applet tells me it has a recommended update: KDE 4.3.5 from the official opensuse update repo. Problem is I already have a more recent version of KDE 4.3.5 installed from the official opensuse KDE repo. In yast I pressed the "switch system packages" button for the KDE repo. How can I make the update applet ignore this "recommended" update? Note that the updateApplet itself is installed from the opensuse update repo. If I don't do this, then the older update applet from the KDE repo always has a recommended update for... Kupdate-applet.
View 2 Replies
View Related
Nov 22, 2009
I have a pppoe adsl connection. When I disconnect and try to reconnect, network-manager keeps asking for my password. I type it again and again with no success. When I reboot, it works again. On ubuntu, I use pppoeconf and it works well. So on Fedora I made a connection with pppoe-setup but neither ifup nor
Code:
pppoe-connect
commands work. When I type
Code:
pppoe-connect
, it says
Code:
/usr/sbin/adsl-start: line 217: 13409 Terminated $CONNECT
"$@" > /dev/null 2>&1
. When I type
Ifup ppp0 doesn't work either. However, with exactly the same settings, ubuntu connects to the internet.
View 2 Replies
View Related
Mar 28, 2011
I cant use the option "export" from the VPN settings in the Gnome Network Manager, when I tried to export a popup says "Unknown error"This happend also in 11.3 and now in 11.4, so it is a nm-applet problema I think... Is there any other way to export my VPN connections?
View 5 Replies
View Related
Nov 17, 2010
I deleted the firewall files "K09SuSEfirewall2_init", "K01SuSEfirewall2_setup", "S11SuSEfirewall2_setup" and "S01SuSEfirewall2_init" from "/etc/rc.d/rc5.d" in order to disable the firewall when rebooting.
As a consequence all network services are not working. I can't connect to any other machine nor to the internet.
I rebuilt the symbolic files based on the ones for runlevel 3, but still no network services are available.
Any suggestions how to make it work again? I'm using Suse 11.3.
View 9 Replies
View Related
Aug 23, 2009
I wireless network card is Broadcom Corporation BCM431, but is doesn't work after I update kernel from
2.6.29.6-217.2.7 to 2.6.29.6-217.2.8.
Linux localhost.localdomain 2.6.29.6-217.2.7.fc11.x86_64 #1 SMP Fri Aug 14 20:53:08 EDT 2009 x86_64 x86_64 x86_64 GNU/Linux
View 2 Replies
View Related
Jan 4, 2010
I installed from scratch 11.2, but i see now that the Automatic update doesn't work. I run "Refresh" on Updater Applet and it come up with an error: PackageKit Error repo-not-available:
View 9 Replies
View Related
Jan 5, 2011
I install from openSUSE-11.3-NET-x86_64.iso. Installation was succesfull, but after install all packet on test internet / update was error. And after log in in installed system internet not work. I use router with DHCP
View 8 Replies
View Related
Sep 9, 2011
I just performed a KDE update from 4.7.0 to 4.7.1 on my OpenSUSE 11.3 64-bit machine and my desktop is in bad shape: the plasma stuff doesn't seem to work at all...and I don't have any panels...the default one on the bottom of the screen is gone also. I tried creating a new user in Yast, but when I log in I get a blank black screen. KDE seems to be pooched!
View 9 Replies
View Related
Mar 24, 2010
Microphone used to work well, but now it does not Indicator in Gnome sound properties does not move and there is no sound in Skype.
View 2 Replies
View Related
May 19, 2010
I've patched my kernel to enable my IDE-mode SATA drivers (ata_piix.c), and everything works fine. But when I attempt to create a Driver Update Disk with this structure, it doesn't work (though the same format works for SLES11):
[Code]....
View 1 Replies
View Related
Jun 4, 2010
(Beginner)Just installed openSUZE 11.1 Dual boot with Vista. I can set up my wireless settings, wep, etc and it says it connects just fine. But when I try to USE the internet it doesn't work. Nothing in update, nothing in firefox. It says it is connected but it's acting like something is blocking it.
View 2 Replies
View Related
Feb 13, 2010
I had work well with opensuse 11 and the internet also work well but when I turn off my computer and then use the XP and work with it. I find out the connection with the internet doesn't work in the opensuse 11. I made a repair and format to opensuse 11 but without any change the net still doesn't work.
CPU Pentium4
Motherboard Gigabyte intel 945 S-series
Dial up connection
I have no experience with opensuse.
View 4 Replies
View Related
Apr 19, 2011
I have a router working as an access point for Internet access. It is used by sveral computers. Wi-Fi connection to Internet through this router does not work after boot on openSUSE 11.4.The cannection becomes established, shows IP address, access point MAC address,the signal level is high. But Internet is unaccessible with traceroute returns"the host is unreachable" message.
If to disable the automatic start of the interface and start it manually with ifup wlan0, nothing changes: the interface still does not work after first start.This is very annoying because this laptop is use by a girl who cannot restart interface. She says she cannot do anything with it.
View 6 Replies
View Related
Apr 28, 2011
Ubuntu Natty amd64 italian.indicator applet for evolution doesn't work at all.No green color and counter(s) always 0 when new mail arrives.Also tried in guest session to have new configuration for evolution with no success.
View 1 Replies
View Related
Mar 25, 2010
I updated Firefox today via Yast, since this time it doesn't show any page.I choosed in Configuration no proxy.The sites are empty, nothing just white.I also tried a downgrade to the previous version, didn't help.The Firewall I deactivated for test in Yast, too.A new profile didn't help, starting as administrator either not.
View 4 Replies
View Related
Apr 20, 2011
In previous openSUSE versions I was using WICD as network manager. I upgraded my openSUSE to 11.4 and resolved give a try to the NetworkManager. I can get network connection, but the dhcp doesn't update the /etc/resolv.conf, so I can't navigate because the dns isnt set.
I tried to reinstall all related packages (dhcp, dns and networkmanager) without success.
If I run dhcpcd the resolv.conf get updated, but dhclient doesn't do the same. It seems that's a dhclient script issues, but I don't know how to test.
View 9 Replies
View Related
Apr 2, 2010
The main thing preventing me from going Linux although I have it installed in a multi-boot is the probelm I have with Reconnecting the Network (eth0)
If I reboot everything is fine and I am automatically connected to internet via my Ethernet_NAT_router/Homeplug_PowerLine/Cable_Router (using DHCP)
But if I manually disconnect the Network using the tray icon, or through the terminal, when I reconnect the Network Manager says I am reconnected but actually I am not connected to the internet. I can load my Cable Routers configuration page but pages beyond that in the outside world are accessible no longer...
To regain access I have to reboot.
The reason this is important for me is that I reckon if I could get this sorted then if I put the laptop to sleep it will will wake up and reconnect.
As it is using Linux sleep function is unworkable unless I don't mind losing internet.
I am determined to get this sorted eventually as I feel sure there must be a solution. My laptop isn't new but is a good workhorse.
Dell Inspiron 4100 / OpenSUSE Linux 11.2 Gnome
View 9 Replies
View Related
Oct 16, 2009
I'm trying to get my vsftp server to run. When ssl is disabled it works pretty fine, but after turning on I get the following error:
[Code]...
View 9 Replies
View Related
Aug 24, 2011
just downloaded Chromium, but the x button for closing a tab doesn't work. How can i fix it?
View 7 Replies
View Related
Apr 14, 2010
How can I make the security applet stop showing an update for firefox 3.5.9? I have a more recent version installed from mozilla repo: firefox 3.6. The mozilla repo already has a higher priority (95 instead of 99), so I don't know what to do.
View 5 Replies
View Related
Aug 11, 2010
I have opensuse 11.1 Gnome on Lenovo S10e. I'm wanting to establish a mobile internet connection. I have tried so far...*UMTSMON but when I click on it nothing happens. I have reinstalled the program several times to no avail. *WINE to run the Optus program, however the program doesn't find the HUAWEI USB stick & *Via a Bluetooth connection (use mobile phone as a modem) didn't work either Anyhow, I have tried these and some other ways to get mobile to no avail.
Also, have gone to network connections-mobile broadband-add-configure it- but what am I forgetting to do? Need a path I can take to get mobile internet working. (I even have a direct SIM card slot in this laptop
View 5 Replies
View Related
May 1, 2010
I have installed openusese 11.2 since about 2 months ago. Everything running well. But since the network admin deploy proxy server, I couldn't get update than.[URL]this problem, was that related to proxy settings?Or did I miss something else?
View 4 Replies
View Related
Mar 26, 2010
we have here a few openSUSE-machines (some 11.1 and 11.2) which mounts their /home from a NFS-Server and imports the users via NIS. I now wanted to use X-Forwarding via SSH, but that doesn't work with NIS-Users.On my machine I use Gnome and my XAUTHORITY-Variable points to /var/run/gdm/auth-for-bup_deg-E3TMSz/database
Why isn't the default ~/.Xauthority-File used for my cookies? What do I have to change to get X-Forwarding in my Setup running?
View 1 Replies
View Related
Oct 9, 2010
I'm running lucid 10.04 on my netbook (regular desktop distro though). I enabled the proprietary drivers needed to get wireless working (I have an hp mini 110 by the way), but the applet in the taskbar will never show a connection, even if it is connected.
View 1 Replies
View Related
Jul 18, 2011
I have an appliance called my_appliance.raw. To start the appliance locally, I use:
[code]...
After that I would like to ssh into the guest from the host but just the ssh command doesn't work. firewall is disabled on guest. the ip I use is the one that ifconfig shows when I run it on guest. sshd is running.
View 2 Replies
View Related
Mar 3, 2010
The auto connect feature of NetworkManager Applet (version 0.7.997) isn't working on my system. If the WiFi connection dies, Network Manager doesn't detect that the connection has been lost and try to reestablish the connection. I have to manually click on the WiFi hotspot to reestablish the connection. This appears to be the case both while the computer is running and when I first boot it up (i.e. when booting, if the first attempt at establishing a WiFi connection doesn't succeed, Network Manager doesn't retry or try another hotspot).Is this "normal" behavior for Network Manager? If not, does anyone know a fix? Here's some more info about my system:
Computer: Dell Inspiron 1318 laptop
WiFi Chip: Broadcomm BCM4238
Kernel Version: 2.6.31.12-174.2.22.fc12.x86_64
[code]....
View 3 Replies
View Related
