OpenSUSE Network :: Wi-Fi Connection Does Not Work After Boot
Apr 19, 2011
I have a router working as an access point for Internet access. It is used by sveral computers. Wi-Fi connection to Internet through this router does not work after boot on openSUSE 11.4.The cannection becomes established, shows IP address, access point MAC address,the signal level is high. But Internet is unaccessible with traceroute returns"the host is unreachable" message.
If to disable the automatic start of the interface and start it manually with ifup wlan0, nothing changes: the interface still does not work after first start.This is very annoying because this laptop is use by a girl who cannot restart interface. She says she cannot do anything with it.
View 6 Replies
ADVERTISEMENT
Nov 17, 2010
I deleted the firewall files "K09SuSEfirewall2_init", "K01SuSEfirewall2_setup", "S11SuSEfirewall2_setup" and "S01SuSEfirewall2_init" from "/etc/rc.d/rc5.d" in order to disable the firewall when rebooting.
As a consequence all network services are not working. I can't connect to any other machine nor to the internet.
I rebuilt the symbolic files based on the ones for runlevel 3, but still no network services are available.
Any suggestions how to make it work again? I'm using Suse 11.3.
View 9 Replies
View Related
Feb 13, 2010
I had work well with opensuse 11 and the internet also work well but when I turn off my computer and then use the XP and work with it. I find out the connection with the internet doesn't work in the opensuse 11. I made a repair and format to opensuse 11 but without any change the net still doesn't work.
CPU Pentium4
Motherboard Gigabyte intel 945 S-series
Dial up connection
I have no experience with opensuse.
View 4 Replies
View Related
Apr 5, 2010
i have huawei usb stick modem, i'm connecting to internet with wvdial command, i have configured the file "wvdial.conf" to be able to connect, everything works fine i guess but the update applet still show me the message
Code:
Unable to check whether updates are available
connect to the internet and connection manager too .. it tell me i'm not connected, i think i must configure my connection in an other way .. but i don't know how ..
View 5 Replies
View Related
Feb 25, 2011
I got everything working except any localhost connections from within the server. I've tried to connect using localhost, 127.0.0.1, and dedicated IP from within the server and several CMS sites I have moved over to the server and all the local host connections fail.
View 9 Replies
View Related
Sep 14, 2010
I have an OpenSuSE 11.1 in vmWare ESX and every other boot I can't access any running network services (ssh, webmin, qmail, mysql, ...) from outside. I just need to login, reboot and voila - network services are working.I gradually updated to 11.2 and 11.3 by following the wiki with success but this problem remained. So I reverted to snapshot of 11.1 and now I would like to identify and solve the problem here first.I also looked at /var/log/messages /var/log/boot.msg /var/log/lastlog but can't find anything usefull. I will now compare those files from the working and non-working boot but meanwhile someone already has an idea or experience what could be wrong?
View 3 Replies
View Related
Feb 5, 2010
I was absolutely dazzled, but my wife made me drop it after 20 days of not being able to get an internet connection.
I thought of trying again after so long to see if things had become easier for every Argentina user who has a Huawei connection (more than half of the country).
Unfortunately not.
The problem is the following:
I have a Huawei SmartAX MT810 usb-modem/router. In order to establish a connection, I need to run the following commands AS ROOT (which is why I cannot use a simple kde autostart bash script)
Code:
modprobe br2684 ; br2684ctl -c 0 -b -a 0.33 ; ifconfig nas0 up ; pppd call adsl
What's more, these commands cannot be run before the modem is operational, since they will end with an error.
In other distros I used to place these commands in /etc/rc.local. I tried placing them in /etc/rc.d/boot.local , but with no success: they are executed before the modem is operational.
In my complete ignorance of all things computer-related I thought it would be a good idea to place a caveat before the execution of the commands:
Code:
READYorNOT=$(dmesg | grep "modem operational") ; while [ "$READYorNOT" = "" ] ; do echo "Modem not operational" ; done
As a result the whole boot sequence gets stuck until I hit ctrl-c.
View 8 Replies
View Related
Oct 31, 2010
I have the "Work Offline" problem: when I boot up, the icon on the toolbar tells me I have "No network connection". This is not quite true, since I can access the first page of any website - only subsequent pages are inaccessible. I get a message saying that Firefox is offline. However, when I uncheck "Work Offline" in the File menu, it makes no difference to this behavior.
The problem is on my Ubuntu Dell desktop, which is connected to the internet with cable broadband via a D-Link router (wired connection). It has worked fine up till now. I use Ubuntu 10.04 and Firefox 3.6.11. I am writing this on my Ubuntu Dell laptop which is wired to the same router, so I assume the problem is not the router. I have tried various strategies suggested in threads on these forums, including editing about:config, changing "allow" to "deny" in some lines of /etc/dbus-1/system.d/NetworkManager.conf and changing from Automatic (DHCP) to Automatic (DHCP) Addresses only, but no luck so far. The contents of ifconfig are:
eth0
Link encap:Ethernet HWaddr 001:aa0:91:a7:51
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets: 0 errors: 0 dropped: 0 overruns: 0 carrier: 0
collisons: 0 txqueulen: 1000
RX bytes: 0 (0.0 B) TX bytes: 0 (0.0 B)
[Code]...
If I comment out "auto eth0" as well, it makes no difference. If I uncomment both lines ("auto eth0" and "iface eth0 inet dhcp") then I lose the internet connection altogether.
View 4 Replies
View Related
Feb 21, 2011
im on node1 when i type the command ssh node2@ip the terminal hangs up a bit then an error message stating that connection timeout but here is a thing: i cant ping to node2
but i can terminate the ping manually using ctrl+c when i terminate the ping usual message appears stating 10 packets transmitted, 100% loss
ps: when i go to node3 and ssh to node2 it works fine and also i can ping from node3 to node2 very fine. and the firewalls are down at all nodes -all wired connection over a switch
View 6 Replies
View Related
Feb 2, 2010
I can make a connection to the vpn server, the connection starts, but nothing happens! My IP address remains the same as previous! There is nothing added to my Knetworkmanager, I'm a beginner I should use a pcf file for my vpn connection. I use it properly, I'm sure because the connection starts and an icon is added to my panel and remains until I disconnect.
I checked it via ifconfig -a, the last part (which is for vpn) is:
Code:
tun0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00
inet addr:141.213.169.76 P-t-P:141.213.169.76 Mask:255.255.255.255
UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1390 Metric:1
RX packets:4 errors:0 dropped:0 overruns:0 frame:0
View 2 Replies
View Related
Jun 6, 2010
I just switched to Ubuntu from Win7 and want to setup VPN connection to my office network. On windows I was using SonicWall Global VPN client using details:
Host: <myname>.dyndns.org
User: <user>
Pass: <pass>
I read in DynDNS.com that simple VPN connection from network manager will not work here and ddclient need to be installed.
View 4 Replies
View Related
Apr 3, 2010
how to get my wireless connection to work on the network. I don't see anywhere to go to see if the wireless adapter is even setup in Fedora. My other question is when I boot up and get the options to select the OS the first one is Fedora but the other one says it is other.
I think that is is booting up the recovery partion of Windows. I don't know how to change it so that it is looking at the correct portition. I know it has something to do with the menu.lst file but when I try to open it says that I do not have premission. I am not sure where to go to edit it.
View 6 Replies
View Related
Jun 7, 2011
I've not found how to configure more than one ip address with network manager.Nor with kde nor with plasmoid network manager.I need several virtual ip addresses for eth0 when the "default" of eth0 is connected i.e. "Connected to Auto eth0" should initialize the virtual interfaces.I have not found no even how to configure the ip address.I think this will be used from ifup config in yast or not?There I have the virtual interfaces but they are not taken from network manager.And last but no least: Is it possible that when using network manager the eth0 is enabled even no user has logged in?
View 4 Replies
View Related
Feb 1, 2010
Im new in this world of linux and suse. I have just installed the opensuse 11.2 in a Dell Inspiron 5160. Such laptop has a BCM4306 Wireless LAN controller. When I tried to configure a wlan connection, I found that the firmware was not installed. After looking in different forums, I installed the firmware b43. Now, my wlan card is abled to find the wireless of my router.
I have tried to configure a connection with YAST as well as with Network Manager, but both cases failled. Specifically, when I use Network manager, Im able to see in the applet my connection, how strong is the signal, but I see a yellow symbol (in one forum, such a box is shown with a green symbol).
I have check many time all about the secutity, encryption, and so one and all seems to be correct. But when I open the mozila firefox or the konqueror browser, no chance to surffer in internet. Now Im just a step to become crazy. The drivers are ok, the information about the router and the keys are ok, but in such a way, I am still harmloss.
View 1 Replies
View Related
Sep 27, 2010
I installed OpenSuSE 11.3. The only "extra" package I put in after the install was VirtualBox-ose. The firewall is disabled. I gave the machine a static IP address. I can get to the Internet from the machine. I enabled sshd to start on boot with "chkconfig sshd on" and also verified the service is running on the machine. I can ssh user@localhost from the machine as well.
When I try to connect to SSH from another machine, I get a connection refused. I verify that the firewall is down. I also try to get to VNC -- same problem: Connection refused. I ping the machine for fun. If I try to SSH again, it sometimes gives me a logon? I would check the server logs for the connection refused, but I wouldn't know where to look. I started in /var/log/messages, but nothing seemed to jump out there. I also find it strange because I can RDP to a windows guest running under VirtualBox. The Windows guest uses Bridged Network and DHCP.
I also find it interesting that I sometimes type a "ping google.com" from the 11.3 box and it will just hang - no output. Then I open firefox and get to the internet. All of a sudden, ping starts to give output. Could this be a neetwork card issue? A configuration issue? I don't know where to start.
View 1 Replies
View Related
May 16, 2011
So up until I updated from Opensuse 11.3 to 11.4, I hadn't any issues with my network connection. At least none worth mentioning. Once I installed 11.4, I've had weird issues with varying lengths of connection. Sometimes I can't connect anywhere, sometimes I can only get to the router, sometimes I'm 100%. I'd fiddle with YAST until everything worked. I honestly have no clue whether or not anything I did had any effect.
Enough of the iffy history, here's what's happening now. For the past few weeks up until last night, I have been at 100% connectivity. I never turned off my computer until last night (it just shut itself off, like the cord was unplugged. I dunno what happened, maybe it was my foot, maybe the PSU. I think it has happened before.). When I turned it back on, I was only able to connect as far as my router (192.168.1.1, a D-Link Gaming router that has always been very good to me). I could not make it to my modem (192.168.0.1, a Quest DSL modem. Once I can get here, then usually I'm good to go 100%).
I tried again this afternoon, and no change. I then get the crazy idea to unplug the ethernet cable from it's PCI-card home and return it to the onboard port (which I long ago declared defunct). Immediately after plugging it into that port, I ran "ping 192.168.0.1" and I started getting returns. I open up Firefox and try to load an external page, and nothing happens. I go back to the console that I was pinging from, and it had stopped. I start pinging my router, and no luck. What I conclude from my little experiment is that the router is not at fault.
1. It did not change at all between being at 100% and being at 0% after reboot.
2. I was able to get returns from the modem, past the router, for a brief period of time while using the defunct ethernet port.
Since I never had these problems before updating to 11.4, I'm inclined to believe that it was the update that started these problems.
View 9 Replies
View Related
Feb 27, 2010
I have been trying to install Xubuntu 9.10 in an old desktop computer (Mobile AMD Duron, 213 Mb RAM) but the mouse doesn't work! Neither the Network connexion... When I boot with an USB (same OS) everything works fine... I can also boot with Puppy Linux (working in other partition) without any problem.
View 4 Replies
View Related
Oct 11, 2010
I am unable to get my wired network connection to work. My laptop sees the wired connection, but will not connect. I am running 10.04 on aLenovo T400 with 3 gb of ram.
View 7 Replies
View Related
Jan 14, 2011
I just finished a fresh install of 11.3 on an HP 7900 small form factor and have no network connectivity. In Network Tools eth0 shows the state as inactive. Network Connections didn't have a connection, so after letting it create one there is no MAC address. I copied and pasted the MAC address from Network Connections eth0, set up a static address with default gateway, netmask, etc. all set appropriately and rebooted. Still no joy.
I want this to get an address via DHCP, I just set up a static address for testing.11.2 sensed the NIC without issue, but 11.3 doesn't seem to like me right now.I wanted to get this deployed on 40 machines today. Oh well.
View 2 Replies
View Related
May 16, 2011
I'm new in SUSE 11.4. My problem is: I'm using Alfa AWUS036H card. It's recognised and I can establish connection to my network, but cant get to Internet. I can't surf the web cos Firefox tell me that connection is timed out. Now I'm confused why I can't surf the web even if I'm connected. Also, I trayed to instal linux drivers for this card folloving Ubuntu "how to" and it just dont work.
View 4 Replies
View Related
Nov 27, 2010
with the ifup method everything works fine. But now I bought a wireless card, so I prefer to use the network manager to manage my connection. On my computer I need a static IP for wired connection, so I created a new wired connection and I called it "wired connection". But network manager always connect automatically to "Auto eth0" and I can't find how to modify this connection. Setting "wired connection" as default didn't change anything, probably becouse it need me to unlock the default wallet... Now, another problem, I really don't know why network manager applet doesn't appear on system tray, but I'm sure that I'm using it instead of the ifup method.
View 9 Replies
View Related
Jul 6, 2011
I installed a simple VPN pptp. Works fine to connect to the linux server. However I would like to connect my other linux-server and (more important) my old Novell 6.0 server. Anyone have an idear what I need to change?
View 3 Replies
View Related
May 14, 2010
I am trying to Setup citrix ICA client 9 on Ubuntu 9.04 Server. I installed it very easily and I am not getting any lib error also. But when I try to connect to the citrix server, it fails with a pop up saying "Error in Network Connection Network or Dialup connection may be preventing ......" This is driving me crazy from 3 days. My project is to check the feasiblity of a Linux desktop
View 1 Replies
View Related
Nov 22, 2009
I have a pppoe adsl connection. When I disconnect and try to reconnect, network-manager keeps asking for my password. I type it again and again with no success. When I reboot, it works again. On ubuntu, I use pppoeconf and it works well. So on Fedora I made a connection with pppoe-setup but neither ifup nor
Code:
pppoe-connect
commands work. When I type
Code:
pppoe-connect
, it says
Code:
/usr/sbin/adsl-start: line 217: 13409 Terminated $CONNECT
"$@" > /dev/null 2>&1
. When I type
Ifup ppp0 doesn't work either. However, with exactly the same settings, ubuntu connects to the internet.
View 2 Replies
View Related
Apr 18, 2011
After i install it i lost my internet connection . i got a message " Wired Network " " you work offline ". i use cable ADSL ,.... my Pc information HP Pavilion 6700 running with both Window 7 & Ubuntu 10.10 note... my network connection work correctly on W7.
View 1 Replies
View Related
Jun 25, 2010
In short: browsing the internet with domain names does not work. The long version: I've configured my network with DHCP and ifup. Ping works on my internal net and with servers in the internet. Dig work's too! I get the right IP to the requested domain. When i try to access the internet using firefox or even wget i get an DNS error. For example wget is showing the following error: Resolving heise.de... failed: Name or service not known. wget: unable to resolve host address 'heise.de'
Again dig show me the right IP and if i add the entry to /etc/hosts it work's too! I've even tried it with manually setup of ip address, nameserver and default gateway but with the same result. Switching off the firewall has no effect on this problem, too.
View 9 Replies
View Related
Jan 5, 2011
I install from openSUSE-11.3-NET-x86_64.iso. Installation was succesfull, but after install all packet on test internet / update was error. And after log in in installed system internet not work. I use router with DHCP
View 8 Replies
View Related
Feb 23, 2011
I'm currently running Fedora 13, after I updated the kernel to 2.6.34, I have to run (as a superuser) "service NetworkManager start" in order to start my network manager, is there are way I can run this on startup?
Also my ethernet connection seems to only work when I restart/boot up my computer, when I wake my computer up from being asleep, the ethernet stops working.
View 2 Replies
View Related
Oct 16, 2010
I had Kubuntu 64-bit installed and decided to try OpenSUSE instead as I was having problems getting the audio to work on Skype. After installing OpenSUSE 11.3 (64-bit), I do not have network connectivity (Ethernet or Wireless)? Neither adapter can be detected? I thought the install would be fairly straightforward as Kubuntu 64-bit detected all the hardware.
View 6 Replies
View Related
Dec 5, 2010
The computer is not assigned an IP/connected to the network after boot. It does not do so automagically after a few hours either. I'm required to do:
Code:
sudo /etc/init.d/networking restart A few times before I get a connection.
The hardware
Ethernet/network card
Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02) (from lspci)
[code].....
View 9 Replies
View Related
