OpenSUSE Network :: Offline Rpm Configuration Using Windows?
Jan 6, 2010
Look I have just installed suse 11.2 KDE at 32 bit. Now I need to get all the drivers and codecs to work properly. So I can download using yast and a bunch of repository urls. If Im wrong please correct me. My internet connection is one of those 3g HSDPA connections so I usually connect a usb modem to my computer (Huawei e220). I've googled around and from my understanding, I need to download an application called kinternet. However kinternet has naturally got dependencies and those dependencies also have dependencies and so on... I'm assuming this tree is pretty massive given the fact that I installed via live CD, the question thatbeckons is how do I download kinternet along with all known dependencies...wait for it.... in WINDOWS??? is it possible or do I have to hunt down every single dependency?? the idea is to get these rpms install them manually on my PC in order to get my modem working on the freshly installed system and perform any future updating using yast on that system with my 3g modem.
View 4 Replies
ADVERTISEMENT
May 27, 2011
I have a couple of nfs shares which I configured through the yast NFS client module. It entered these in my fstab file to start on bootup. A sample entry is:
10.2.1.30:/home/opt/Cindy/homenfsdefaults 0 0
As long as the foreign computer is online all is well. If the foreign computer is taken off line, soon after KDE applications such as Dolphin and the panel freeze, even if I am not using the shares. When the foreign computer comes online again, everything unfreezes on my computer and works fine. Likewise, if the other computer is not online when I boot, there is a long delay while the system waits for the share to come up. Is there something in my configuration that I can change to stop either or both of these problems? I am running 11.4 x86_64 on a wired network with static ip addresses.
View 9 Replies
View Related
Jun 8, 2010
My suse 11.2 has auto login. How to change to login password to keep the kids off my computer, and offline.
View 1 Replies
View Related
Mar 27, 2010
I have a Canon MX860 network printer but I cannot get it to connect with my openSUSE 11.2 computer
View 9 Replies
View Related
Jun 19, 2010
i am using intel hardware on this working on suse linux 10.2 . i am not able to configure the network card IP address I have tryed using dhcp and static both way. Currently intel DG41RQ network card is assembled in my system. by using command ifconfig i can see only lo but eth0 is not displayed their.
View 4 Replies
View Related
Dec 12, 2010
I've just installed OpenSuse 11.3 on my new laptop but I've skiped the network configuration during the installation of system, but after that when I use the command : dhclient eth0 I'll be connected without any problem except when I reboot the system, I should retype the command to connect
View 3 Replies
View Related
Sep 29, 2010
I need to set up a Debian server in a windows network so that users can securely ftp docs to the Debian server and then pull docs from the server when needed - using a secure ftp session. I have the Debian Server built and IP'd. Do I just need to set up the vsftpd.conf and thats it? Right now I am just concerned with getting ftp working.
View 7 Replies
View Related
May 5, 2011
I would like to connect from squeeze to my windows network. Do I need samba server, smbclient is already installed?
If I do a doubleclick -> Windows Network then get "Unable to mount location".
If I use -> Connect to Server -> Windows Share then it works well.
How to configure samba server that I can see Windows machines in "Windows Network"?
View 2 Replies
View Related
May 31, 2010
I have a external harddisk attached to my linux PC.I have a laptop having windows 7 on my network.I want to to be able to open up the folder in the external harddisk(linux partition) and check the files from my laptop. People suggest samba. But I am not able to configure correctly. Please excuse me and give me few detailed instructions.
View 4 Replies
View Related
Dec 4, 2015
I try to connect my Debian Jessie to my Windows share
This is what I have done:
-> 1 - create an .smbcredentials file located in my /home directory (with account / password and domain)
-> 2 - implement /etc/fstab with information like that :
//192.168.x.x/Animes/media/Animes cifs uid=toto,dir_mode=0777,file_mode=0777,credentials=/home/.smbcredentials,iocharset=utf800
and when I try to go on my windows share, I have this message:
An error occurred while accessing 'Home', the system responded: mount: only root can mount //192.168.x.x/Audio-Video-01 on /media/Audio-Video-01
I think about one thing, if uid=toto is different in fstab than my current debian account session name, it is possible the problem came because of that?
(fstab, uid=toto and current session titi)
View 3 Replies
View Related
Jul 18, 2010
Everything worked fine until I downloaded some Ubuntu upgrades. Now, every time I try to connect to internet via network manager it says: " Network: Disconnected - you are now offline". so what to do...
View 9 Replies
View Related
Nov 20, 2010
The title message appears when I log in. Neither wired nor wireless network adapters show in ifconfig output. Network manager shows a simple networking disabled greyed out message. Both adapters work in live cd boot. Everything was working properly before; I'm not sure what happened.
View 3 Replies
View Related
Dec 10, 2010
I have 3 computers. One running openSuse 11.3 with SAMBA and the other 2 are Windows 7 Professional boxes. I have the same user name and passwords for all three boxes.
From the Linux box I can access one of the Windows 7 boxes but the other won't accept my user name and password. The one that won't accept has Windows LiveID Sign-In Assistant installed. Apparantly that's an automatic install now.
I've read that there is a bug with the SAMBA libsmbclient [URL].
I tried updating via YAST but still end up with version 3.5.4-5.1.2 and this doesn't work.
View 1 Replies
View Related
Sep 1, 2011
I just installed Ubuntu 10.04, complete noob, but I can't connect to the internet. I connect the ethernet cable, select auto ethernet and the icon animates for about 30 seconds. But then I get a notification "Wired network Disconnected - you are now offline".
Don't know what other information I should provide. I tried a few things from different posts like editing the dhcpclient.config but don't really know what I'm doing and none of these worked anyways. I'm not even sure if they were solutions to a similar problem! I'm using the same connection on my Mac OS 10.4.11 (different machine) and I have no problems. Could I use these same settiings in Ubuntu? I don't know what the different fields represent or what I should input in manual settings.
View 9 Replies
View Related
May 3, 2010
I'm trying to make a local package server for my offline development network. Can anyone recommend a mirror containing every single package for CentOS 5.4 x86 as well as 64 bit? I've looked around but I haven't had too much luck yet.
View 1 Replies
View Related
Mar 9, 2010
I just intalled OpenSuse 11.2 on VmWare Server 2.0.2, the network is configured as Bridged and is sucefully configured a fixed IP in my network. Ok... The problem is... I can ping / trace all addresses from OpenSuse console. But I Can't wget all of them... It's a random thing. the same address that trace's ok, don't work for HTTP.
View 2 Replies
View Related
Apr 4, 2009
On my Linux box, (which is a proxy, webserver, mailserver, etc. etc. etc.) I use static IP's. Network manager is turned off, but when you do that Firefox ALWAYS has WORK OFFLINE checked. I could use Network Manager but that's not really the right way, cause I need the servers to work in level 3, etc. as well...Anyways, anyone know a way to make FF behave if I use Static IP without NM?
View 1 Replies
View Related
Apr 20, 2010
I have a little problem with my Linux Suse 11.2 Server. I have unused network card with one port, and one with 4 ports and two used ports.
so->
eth1 is connected to a dsl-modem
eth2 is connected to a switch
i want my suse server to route between modem and switch.
Somehow, I can't go in the internet via eth1. I have to create a bridge br0 to go in the internet. very strange, when i delete the bridge and set eth1 as primary device, i have no internet.
How can i route from eth2 (10.x.x.x) to (eth1 or br0 (80.109.145.x) to Modem (80.109.145.1)?
View 1 Replies
View Related
Aug 12, 2010
I am using Sony vaio E series laptop. Previously, I was using my E63 nokia phone as modem for internet connection and i have installed K-internet in my Opensuse OS, and configured wvdial.conf as follows:
[Dialer Defaults]
Init1=ATZ
Init2=ATQ V1 E1 S0=0 &C1 &D2 + FCLASS=0
Init3=AT + CGDCONT=1, "IP","bsnlnet","",0,0
Baud=4608000
Modem Type= Analog Modem
[Code]....
But now, I have Reliance Brodband Connection through LAN. when I am Pluggin in my LAN cable in my laptop YAST Network Configuration Showing Marvell Ethrtnrt is not Configured, When i am going to configured that part it's showning me no Enther net present or Configured By ny Hardware Is detecting ethernet. So, I have concluded that it might be the problem with my wvdial.conf. Also, additional information are as follows:- S- Open suse 64bit, Version- 11.2, cause I cannot Connect to my Internet now? What should I do to have this Problem Fixed?
View 3 Replies
View Related
Apr 18, 2011
After i install it i lost my internet connection . i got a message " Wired Network " " you work offline ". i use cable ADSL ,.... my Pc information HP Pavilion 6700 running with both Window 7 & Ubuntu 10.10 note... my network connection work correctly on W7.
View 1 Replies
View Related
Feb 13, 2010
I'm using openSUSE 11.2 (GNOME), When I go to yast and if I try configuring Fingerprint Reader or Windows domain membership I get the following error
Code:
Cannot write PAM settings
I want to understand whether its a bug or something related to configuration. When I
[code]...
View 2 Replies
View Related
Mar 19, 2010
I am trying to enable DHCP so that it will give out IP's to some XP boxes when they boot. I have had success doing it dynamically, but not statically using the host declaration.
host xpTest {
hardware ethernet 00:50:56:2A:3B:00;
fixed-address 192.168.100.2;
}
My question is, what should the subnet declaration be if I only want to hand out static IP's like this? Also, the host is the same name that is specified in /etc/hosts correct?
View 3 Replies
View Related
Apr 28, 2010
I haven't been able to get a working X11 environment on a Dell PowerEdge 1850. Using YaST without an X11 environment sucks particularly when you are trying to configure Apache. In addition, the Apache configuration files seem to have changed significantly since the last time I configured Apache on a SuSE Linux distribution. Where can I find good documentation on editing suseconfig files to ensure that I get the modules installed that I need for the collaboration tool that I'm installing?
View 2 Replies
View Related
Dec 23, 2010
Automatic Proxy Configuration via DHCP | AGIX Linux Tutorials & HowTo's | Ubuntu Focuson openSUSE not work, Why? # These 2 following lines are the key to your pac success:option local-pac-server code 252 = text;option local-pac-server "http://192.168.1.254/wpad.pac";
View 2 Replies
View Related
May 6, 2011
I've got problem with configuration of 6to4 tunnel. I do it like they do here using iproute2 HTML Code: [URL] And still I can't ping ipv6.google.com: I' ve got Destination unreachable: Address unreachable
View 1 Replies
View Related
Oct 16, 2010
Do you use any offline dictionary? Someone recommend a dictionary for linux/openSUSE.
View 3 Replies
View Related
Aug 7, 2011
I'm trying to setup a wireless AP with my old asus eeepc, so it can act as a repeater to connect my android device on the other end of the apartment. I've already created the Wireless Access Point using hostapd. It took very little configuring, just changed from mode 'a' to 'g' and changed the channel from 60 to 1 and It was all set. Next I setup a dhcp server. Also simple enough using yast.
Up to this point, I was able to connect my android device to the newly created wireless network. However It doesn't have internet access. I guess I have to configure iptables for this, but I find it incredibly confusing! Here are a few specs to help with any examples: The laptop is connected to the internet through eth0 with IP 192.168.2.120 Hostapd is using wlan0, and I'm pretty sure it created mon.wlan0 So, to sum up, when I connect my android device to the network I can, for instance, see what ever pages apache is currently serving on the laptop, but can't access the internet.
View 1 Replies
View Related
Jan 16, 2011
my friend does not have a internet connection, he require vlc (to watch movies) and g++(as c++ compiler). how he can install these softwares in his pc offline??
View 9 Replies
View Related
Dec 29, 2009
I've just spent the entire night trying to get my computer to share Internet with my laptop. I have DSL Internet with the modem configured to bridge mode. On the openSUSE server I have two NIC's. When setting up the DSL (pppoe) it created a dsl0 which is using the NIC eth0. So now I have dsl0, eth0, and eth1 I configured eth1 for DHCP server. When I connect with my laptop using DHCP it gets an IP address just fine. However I can't access the Internet. I think my problem is in the Kernel IP Routing Table. Here is the output from /sbin/route -n
[Code]...
dsl0 obtains IP from ISP eth0 is set to DHCP although that confuses me because how can the same NIC have two IP Addresses? eth1 static IP 10.30.60.1
View 5 Replies
View Related
May 15, 2010
I use openSUSE 11.1 and my YAST can't connect Internet: How to configure my YAST Internet configuration through proxy server in order to download and install the programs (for example dwnld and install WML from [URL])
View 9 Replies
View Related
