I just intalled OpenSuse 11.2 on VmWare Server 2.0.2, the network is configured as Bridged and is sucefully configured a fixed IP in my network. Ok... The problem is... I can ping / trace all addresses from OpenSuse console. But I Can't wget all of them... It's a random thing. the same address that trace's ok, don't work for HTTP.
View 2 RepliesI need some advice about virtual hosting on opensuse 11.1. I have about 6 domains running on the server. I use Webmin and Virtualmin on my server. Everything is working ok but I feel that I do something wrong
1. Lets say I have [URL] web and mail server running. When I write [URL] on my browser, the site is coming up but when I also write [URL] and I see the same page. There is no record on apache for [URL], there is only DNS record for the mail server. What do I do wrong?
2. Apache conf. is as below; do you think is it better to write "any" on address section instead of ip? What is the difference?
Address 88.11.11.111 (ip isn't true) Port 80Server Name domainname.com Document Root /srv/www/domainname.com/public_html
3. IP Address is the same for all domains. How I can configure that; when I write the ip address on my browser, only the specific site which I choose will be opened? Whichever I created last, that site is opening right now.
I have a mac and an openSUSE box connected wirelessly to a router. From my mac, if I ping the Linux machine by both ip address and hostname "elmo.local", I get a response. If I ping my mac from the Linux machine using its ip address, I get a response. However, if I ping the mac from the Linux box using its name "kermit.local" - nothing!
This means in order to share files between them via the network, I have to use the ip address rather than name, but I'd rather not. When I had Ubuntu installed instead of openSUSE this all worked fine out of the box, so I'm assuming it's a problem with the setup of openSUSE rather than the router or the mac.
I have openSUSE 11.2 installed and i need to create a gateway server that allows virtual private network connections. I want to play with my friends some lan games, but we are in different networks, so i want to create this gateway server so we can connect with VPN clients to this server and play freely.
View 7 Replies View RelatedI've not found how to configure more than one ip address with network manager.Nor with kde nor with plasmoid network manager.I need several virtual ip addresses for eth0 when the "default" of eth0 is connected i.e. "Connected to Auto eth0" should initialize the virtual interfaces.I have not found no even how to configure the ip address.I think this will be used from ifup config in yast or not?There I have the virtual interfaces but they are not taken from network manager.And last but no least: Is it possible that when using network manager the eth0 is enabled even no user has logged in?
View 4 Replies View Relatedwhile trying to set up Xen Virtual Nodes we encountered one issue with the network (which is why it is posted here On the DomU the interface is provided by a bonding -bond0- of three NICS. Now the Xen network script a) does not take this bonding b) destroyes even this bonding From a number of posts I assume I have to configure this by hand, correct? Is there an instruction how to do this? Simply create a bridge on top of bond0??
View 1 Replies View RelatedI would like to use zypper to update openSUSE 11.2 through the Virtual Terminals (tty1 thro' tty6).
Network Interface is wlan0 (Wireless LAN, home network through a Router) that requires a password using WPA2.
My question is how to start wlan0 through the command-line ?
i installed RHEL 6 as virtual host on one of the blades on HP enclosure. i set up network on eth0 and started it but i cannot even ping gateway from within this installation. i logged in as root. i set up everything such as IP, netmask, gateway, nameserver etc.
View 1 Replies View Related1) My Internet connection is COMCAST with a router box and one public IP address.2) My web server is Apache using 10.1.10.200 as its address.3) Now I want to add another host name (www.myhealth.com) on my server. I did DNS forwardin (with Godaddy) to my COMCAST static IP address.4) I also added (in my httpd.conf) a block for virtual hosting
View 4 Replies View RelatedRecently loaded 11.3 onto a virtual machine, however none of the network settings will allow me to connect to the internet. First time Ive had this happen, other distro's Ive experimented with connected with no problems. I recall seeing a similar topic some time ago (dont remember if it was here or another forum), but at the time, there had been no fix. Anyone know if this has been fixed?
View 5 Replies View RelatedI have just loaded Suse 11.4 and have had (2) problems, 1st: When I installed some additional programs, such as, Scribus, the system showed them as installed but they did not show up in the "applications" menu any where. I finally tracked them down and edited them in and they work fine - Why aren't they being automatically placed into the menu system? 2nd: I have a home network setup and all systems can see and work with each other, however, the host system is not shown as if it did not exist at all. for example; if I go to "network services" and select "Samba Shares" if other computers are connected it will show them but not the host - if no other computers are connected it shows nothing. On my 11.3 system it shows the host eg; "Linux-12fx blah blah" this is of course my host machine. I have replicated all of my settings on the 11.3 settings on my 11.4 system - no luck!
View 4 Replies View RelatedEDIT: Thread name should be "No network on XEN guest ofcourse". I am trying to run OpenSUSE 11.3 as guest in OpenSUSE 11.2 as host. First problem I came across was libvirtd service wasnt started and after that I was able to install guest OS. Now there is a problem as guest doesnt have connection with internet.
Here is the script for the guest
name="opensuse113"
uuid="2f1f1d63-c416-a9c4-3bc1-4e92e248c5cc"
memory=512
maxmem=512
[code]....
Here are the images that show how it is all configured taken from Virutal Manager.
network1 png
tmpbridge png
host config png
The last image is from the guest config I just named it badly. Observe that xen is up and runing and there are no others issue this far.
today I tried to configure a network route to a host for testing my network interface. Code: route add 192.168.1.15 eth0 As I have to eth interfaces and both interface got their IP from DHCP (192.168.1.11 and 192.168.1.12) and are in the same subnet, I shut the other interface down:
Code: ifconfig eth1 down Then I tried to test the interface by doing a ping to 192.168.1.15.
Problem: When I unplug the cable from eth0 (and eth1 is still plugged) the ping still works. Somehow my linux (it's debian) powers up again eth0 and pings over this port.
How can I stop my linux doing this. I just want to have the route added only on the one interface - not the other. Is it maybe some case of a default-gateway?
Having made the transition from a certain widely used operating system to linux, suse 11.2, x64, successfully and pleasantly we are still left with a few problems.One of these is a few applications i have to use which run only in that old OS. ?To that end I have installed VirtualBox and got them to run with one glitch. I cannot print from VBox to my HP LaserJet 4000, lpt1 printer, which works fine in suse. Searching and posting on the Vbox forums turned up that lpt1 is not supported in the current vbox and that I need to set up a virtual network, set up the printer as a network printer and set it up as an lpd/lpr printer in Vbox WinXP. Have tried many different ways to do this without success, I think the problem is I do not know how to set up a network printer in Linux.
The virtual network is vboxnet0, which does show up in ifconfig, along with my eth0 net, and I can ping the windows guest, gateway and the host from either side host:suse/guest:winXP) respectively. Have tried numerous ways of setting up printer in YaST which works in suse but still does not work from WinXP guest. Have read the suse manual and several sources and searched forums with no results.Finally I am thinking I just don't know how to set up a network printer in linux. Using cups, kde, suse 11.2, don't know what else to tell. Samba is installed, although I am not using it to the best of my knowledge.
I've been trying to understand how Linux creates the network/interfaces on a machine (been reading the Linux admin guide), but as I'm pretty new to this subject, I've got lost in the forest.
To provide with my goal:
1.) Learn about network setups on Linux
2.) Be able to maintain my own (virtual) network
3.) Configure my (virtual) network
I have a server that is on both a standard network and a virtual network, as follows: server1 attached to standard network server1 acting as Dom0 with two linux DomU guests (under Xen) I only have one network card. How do I configure server1 to have a different hostname on the standard network than on the virtual network? Here are the relevant network configuration files for server1:
/etc/sysconfig/network-scripts/ifcfg-eth0:1
DEVICE=eth0:1
BOOTPROTO=none
NETMASK=255.255.255.0
IPADDR=192.168.122.9
[Code]...
I need to blacklist any incoming/outgoing connections to Google. I need to add filter something like this: *google*
View 5 Replies View RelatedOpenSUSE version: 11.2 *and* 10.0 I am unable to send email. It appears I am being blocked by my ISP [URL]... A Wireshark trace shows ICMP type 3 Code 13 - "Administratively filtered". It's important to note that I don't know exactly when the problem started, because I seldom use my ISP email account, I use Yahoo web mail due to the "throwaway" nature if I get hit with spam. I only discovered the problem when testing the functionality of 11.2. I suspect the problem started several months ago: I restored openSUSE 10.0 and the problem exists there too. I wish I'd sent that last email via 10.0 before the upgrade.
The weird thing is that using Windows 2000 box I can get a successful connection using telnet (Telnet also fails on the openSUSE box.) It appears to me there is something in the Linux TCP stack that Teksavvy doesn't like. I am on dial up and I pointed this out to Teksavvy tech support, as I am probably the only person left on dialup and the reason no one else has reported the problem
I can lookup DNS hostnames with dig and nslookup, but nothing else seems to be able to resolve anything. ping, telnet, Firefox, everything gets "unknown host".
For example:
> dig yahoo.com
; <<>> DiG 9.6.1-P2 <<>> yahoo.com
;; global options: +cmd
;; Got answer:
;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 20438
;; flags: qr rd ra; QUERY: 1, ANSWER: 3, AUTHORITY: 13, ADDITIONAL: 0
;; QUESTION SECTION:
;yahoo.com.INA
;; ANSWER SECTION:
yahoo.com.17579INA209.131.36.159
yahoo.com.17579INA209.191.93.53
yahoo.com.17579INA69.147.114.224
;; AUTHORITY SECTION:
.10071INNSL.ROOT-SERVERS.NET.
.10071INNSI.ROOT-SERVERS.NET.
.10071INNSH.ROOT-SERVERS.NET.
.10071INNSF.ROOT-SERVERS.NET .....
> ping yahoo.com
ping: unknown host yahoo.com
> ping 209.131.36.159
PING 209.131.36.159 (209.131.36.159) 56(84) bytes of data.
64 bytes from 209.131.36.159: icmp_seq=1 ttl=55 time=97.2 ms
64 bytes from 209.131.36.159: icmp_seq=2 ttl=55 time=98.9 ms
I am running
Code:
On my laptop (HPDV7), using DHCP for network access, KDE4.
I use Network Manager to manage wired and wireless connectivity.
I also have Samba server running for connectivity to Windows machines.
My router runs DD-WRT.
How do I tell this HPDV7 system to propagate a Host Name up to the router?
In the DD-WRT status screen, I see Host Name as "*" associated with the assigned IP address.
I cannot, for example, ping my HPDV7 machine from my windows machine, I assume because the router (also providing DNS for my network) does not provide the name to address translation.
I CAN ping the IP address directly, and Samba connectivity from the Windows machine to HPDV7 works.
The file
Code:
I am running 11.2 and set ssh to boot at runlevel 3 and 5 through yast and started the service through the terminal. I have turned off the firewall on my wireless router and in the local firewall. When I try to connect from a machine in my office, I get the following
Code:
ssh: connect to host xx.xxx.xx.xxx port 22: Connection refused
When I run telnet from the machine, I get:
Code:
telnet: connect to address xx.xxx.xxx.xx: Connection refused
telnet: Unable to connect to remote host: Connection refused
netstat -tlnp on my machine shows:
Code:
tcp 0 0 :::22 :::* LISTEN 31622/sshd
I am trying to enable DHCP so that it will give out IP's to some XP boxes when they boot. I have had success doing it dynamically, but not statically using the host declaration.
host xpTest {
hardware ethernet 00:50:56:2A:3B:00;
fixed-address 192.168.100.2;
}
My question is, what should the subnet declaration be if I only want to hand out static IP's like this? Also, the host is the same name that is specified in /etc/hosts correct?
I'm running openSUSE 11.2 (Linux piura 2.6.31.12-0.2-desktop #1 SMP PREEMPT 2010-03-16 21:25:39 +0100 x86_64 x86_64 x86_64 GNU/Linux) and have a network problem. At work, ethernet works fine. When I plug it into my DSL router at home (which works with other computers), I encounter the following behavior: ping can resolve host names, however, traceroute and Firefox and Thunderbird cannot.
It happens for both wired and wireless connections.
How I setup my NetworkManager to use the correct host name on my system, if that is possible. NetworkManager ignores the specified hostname and uses 'localhost', which is a bit annoying.
View 9 Replies View RelatedI have OpenSuse 11.2 installed and I'm currently testing out Magento Commerce which is working as expected. In order to create fake customers the application requires a unique e-mail address for each customer. I currently use postfix and have all the e-mails being sent to my providers domain which i only have 2 email user accounts. How do i set up virtual e-mail addresses like joeblog@fakedomain.com and maryblog@fakedomain.com such that when the Magento Application sends emails to these addresses I would like to access the corresponding mail boxes on the same host. (i.e. the machine i run Magento on)
View 1 Replies View RelatedI only have one IP adress to access the server. But the server will host 3 web sites and I want them to be hosted in a vm. So, I want to setup 3 virtual machines to do it and use apache reverse proxy and vhosts to redirect the domain requested to the right vm. Now. I understand the concept, but I am not an expert to set that up....
I have an openSUSE 11.3 server. So, I have to set a virtual machine server, is that right? I have been told that I cannot do it with VMware server in oS 11.3. Can I use virtualbox for this? I only have to install virtual box? Is there a special version to install? Once the virtual machine server is install, is it trivial to create 3 vm? So, I want to know wich are the steps I have to take to set that up.
I just installed (n this 11.2 system) vmware server (v 2.02), to have access to a few small systems. One of them is a 11.1 guest which I just upgraded to 11.3, successfully (almost).
I have a problem, though: from the host I can not ping/ssh the guest.
Guest to host works fine (including names).
Code:
The firewall is down on both sides. I don't see anything with iptraf in the guest. The IP addres of the guest is correct, unless I'm too tired to see.
Why?
Code:
I have OpenSuse 11.3 with VirtualBox on it, and with installed Oracle DB (on host OS).. but, sometimes this computer is disconnected, without it's gateway (adsl router)... and in that case, I cannot ping from virtual OS to host OS, or another virtual OS. I tried to use 'Host only' option within VirtualBox, but it doesn't work. What should I do? It seems that virtual machines requires some kind of gateway/router, but since machine is disconnected, it's not working.. how could I fix it?
View 4 Replies View RelatedI have currently have a PC with 16GB of RAM. I will be running multiple virtual machines using VirtualBox. Would I get the best performance from running the VMs on a Linux host, or a Windows host?
View 4 Replies View RelatedWhen I converted to OpenSUSE 11.2, and went through YaST HTTP Server Configuration, creating my virtual hosts under the Hosts tab, YaST combinedm all int ile,"/etc/apache2/vhosts.d/ip-based_vhosts.conf".I did google and read, [URL]for further assistance.I'd like each virtual host to have its own file under vhosts.d, and wondering why YaST did not do that.The file /etc/apache2/httpd.conf laid out the file structure, and all vhosts.d/*.conf files are included.Is there a way to tell YaST to create separate files for each vhost, or does the user have to manually do it?
View 5 Replies View Related