Fedora Networking :: Network Manager Is Turned Off, But When Do That Firefox ALWAYS Has WORK OFFLINE Checked?

Apr 4, 2009

On my Linux box, (which is a proxy, webserver, mailserver, etc. etc. etc.) I use static IP's. Network manager is turned off, but when you do that Firefox ALWAYS has WORK OFFLINE checked. I could use Network Manager but that's not really the right way, cause I need the servers to work in level 3, etc. as well...Anyways, anyone know a way to make FF behave if I use Static IP without NM?

View 1 Replies


ADVERTISEMENT

Fedora :: Firefox Sets Itself To Work Offline?

Nov 19, 2009

I don't start a network connection when my machine boots FC11 64 bit. When I start the connection and the Firefox browser, I always find that Firefox has set itself to work offline. I use File->work offline and uncheck that box. This fixes the problem, but only till the next reboot. Even if I exit Firefox "in an orderly manner", the next time it will have set itself to work offline.

I had this problem in previous Fedora versions. I read about two solutions on the web. One was to write a script that removed a file called extensions.cache before Firefox ran. The other was to type about:config in the address bar of Firefox, acknowledge the warning message, and use the right mouse button to togglethe value ofoolkit.networkmanager.disable from "false" to "true".Are either of these good solutions? What exactly does "network manager" do? I think of it as the gui under System->Administration->Network, but it must be more.

View 2 Replies View Related

Ubuntu Networking :: After Install - Lost My Internet Connection - Wired Network - Work Offline

Apr 18, 2011

After i install it i lost my internet connection . i got a message " Wired Network " " you work offline ". i use cable ADSL ,.... my Pc information HP Pavilion 6700 running with both Window 7 & Ubuntu 10.10 note... my network connection work correctly on W7.

View 1 Replies View Related

Fedora Networking :: Network Manager - Adsl Connection - Ifup Ppp0 Doesn't Work

Nov 22, 2009

I have a pppoe adsl connection. When I disconnect and try to reconnect, network-manager keeps asking for my password. I type it again and again with no success. When I reboot, it works again. On ubuntu, I use pppoeconf and it works well. So on Fedora I made a connection with pppoe-setup but neither ifup nor
Code:

pppoe-connect
commands work. When I type
Code:
pppoe-connect
, it says
Code:
/usr/sbin/adsl-start: line 217: 13409 Terminated $CONNECT
"$@" > /dev/null 2>&1
. When I type

Ifup ppp0 doesn't work either. However, with exactly the same settings, ubuntu connects to the internet.

View 2 Replies View Related

Ubuntu :: Uncheck Work Offline In Firefox?

Apr 4, 2011

When I try to access the internet after I turn on my machine I get a message that I cannot access the internet due to my work offline is checked. After I uncheck it and try again, still no luck.

View 3 Replies View Related

Software :: Firefox: Changing Work Offline Default?

Jan 29, 2009

I'm running FFx 3.0.5 on Debian Lenny and like many people before me, I am annoyed with the Work Offline setting being the default setting. I have perused the previous threads on this topic and found two solutions:

1. shut off the Network Manager daemon

2. change the settings in prefs.js

I have shut down the Network manager but to no effect The relevant setting in prefs.js is:

user_pref("browser.offline", false);

how I can change this setting to default to Work Online?

View 10 Replies View Related

Fedora Networking :: Doesn't Work After Turned Off Wireless By Pressing A Wireless Button On Laptop?

May 19, 2011

Recently I have installed Fedora 14 on my other laptop. It's a dual boot with Windows 7. Everything worked perfectly fine, networking included, until my friend didn't accidently turned off the wireless by pressing a wireless button on the laptop. Since then the wireless on Fedora doesn't work. It does on Windows thought. I've tried restarting the laptop few times, but the wireless still doesn't want to work again.

View 2 Replies View Related

Ubuntu Networking :: Internet Connection: 'Work Offline' - "No Network Connection"

Oct 31, 2010

I have the "Work Offline" problem: when I boot up, the icon on the toolbar tells me I have "No network connection". This is not quite true, since I can access the first page of any website - only subsequent pages are inaccessible. I get a message saying that Firefox is offline. However, when I uncheck "Work Offline" in the File menu, it makes no difference to this behavior.

The problem is on my Ubuntu Dell desktop, which is connected to the internet with cable broadband via a D-Link router (wired connection). It has worked fine up till now. I use Ubuntu 10.04 and Firefox 3.6.11. I am writing this on my Ubuntu Dell laptop which is wired to the same router, so I assume the problem is not the router. I have tried various strategies suggested in threads on these forums, including editing about:config, changing "allow" to "deny" in some lines of /etc/dbus-1/system.d/NetworkManager.conf and changing from Automatic (DHCP) to Automatic (DHCP) Addresses only, but no luck so far. The contents of ifconfig are:

eth0
Link encap:Ethernet HWaddr 001:aa0:91:a7:51
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets: 0 errors: 0 dropped: 0 overruns: 0 carrier: 0
collisons: 0 txqueulen: 1000
RX bytes: 0 (0.0 B) TX bytes: 0 (0.0 B)
[Code]...

If I comment out "auto eth0" as well, it makes no difference. If I uncomment both lines ("auto eth0" and "iface eth0 inet dhcp") then I lose the internet connection altogether.

View 4 Replies View Related

Ubuntu Networking :: Wireless Switch Can't Be Turned On Again After Being Turned Off

Feb 2, 2010

The wireless connection works fine. The wireless switch automatically turns itself on every time I start the computer. However, after turning it off, I can't ever turn it on again unless I restart the computer. And because of this, the wireless connection is disabled until the next time I start the computer.I don't think this is a hardware problem because the switch can be turned on and off, although not in the way I expect.

I'm using ubuntu 9.10 on an Acer Aspire 4740G. The command [lspci | grep Network] shows Atheros Communications Inc. AR928X Wireless Network Adapter (PCI-Express) (rev 01). the [rfkill list] command shows (when the switch is on)

0: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no

and, as expected, shows (when the switch is turned off)

0: phy0: Wireless LAN
Soft blocked: no
Hard blocked: yes

I just want to be able to turn the switch on or off at any time I want as long as the computer is still on.

View 2 Replies View Related

Ubuntu Networking :: Stick On Network Manager 0.8 Doesn't Work - Restore Karmic's Version?

Feb 26, 2010

I added a repo from launchpad to install latest Network Manager and then installed it (version 0.8). Then I decided to rollback to Karmic's version (since 0.8 doesn't work) but failed: I removed the repo from sources.list

Then apt-get udpate
Then apt-get clean
Then apt-get install network-manager...

But still 0.8 version is downloaded and installed! How can I restore Karmic's version?

View 8 Replies View Related

Ubuntu Networking :: Network: Disconnected - You Are Now Offline

Jul 18, 2010

Everything worked fine until I downloaded some Ubuntu upgrades. Now, every time I try to connect to internet via network manager it says: " Network: Disconnected - you are now offline". so what to do...

View 9 Replies View Related

Ubuntu Networking :: Network Disconnected (You Are Now Offline)

Nov 20, 2010

The title message appears when I log in. Neither wired nor wireless network adapters show in ifconfig output. Network manager shows a simple networking disabled greyed out message. Both adapters work in live cd boot. Everything was working properly before; I'm not sure what happened.

View 3 Replies View Related

Ubuntu Networking :: 10.04 Wired Network Disconnected - You Are Now Offline

Sep 1, 2011

I just installed Ubuntu 10.04, complete noob, but I can't connect to the internet. I connect the ethernet cable, select auto ethernet and the icon animates for about 30 seconds. But then I get a notification "Wired network Disconnected - you are now offline".

Don't know what other information I should provide. I tried a few things from different posts like editing the dhcpclient.config but don't really know what I'm doing and none of these worked anyways. I'm not even sure if they were solutions to a similar problem! I'm using the same connection on my Mac OS 10.4.11 (different machine) and I have no problems. Could I use these same settiings in Ubuntu? I don't know what the different fields represent or what I should input in manual settings.

View 9 Replies View Related

Fedora Networking :: Network Manager Has Disappeared

Mar 11, 2009

I updated my FC10 just a day back. The problem is that Netwrok Manager has disappeared. And in spite of re-installing it, it doesn't appear on the panel when i enter 'NetworkManager' as root in the terminal.I have a USB modem right now. Update was made through a broadband connection. Ethernet works perfectly well but this USB modem of mine doesn't work at all. And I have to use USB not Ethernet.

View 9 Replies View Related

Fedora Networking :: Network Manager DHCP

Jul 7, 2009

I have got DHCP issues with Network Manager. Whenever I try to connect using static IP it works, but when I use use Netowork Manager with DHCP, it seems to try to connect and soon says "Network Disconnected"..I've managed to connect to wlan and eth using network, so there shouldn't be any hardware/driver issue.

View 4 Replies View Related

Fedora Networking :: Connecting Home Network To Work Network

Sep 20, 2010

Currently my office use a Cisco Firewall which will only allow the ANYCONNECT utility to do the vpn connection. I found a Linux utility (OpenConnect) which will do the same thing, but allow me more flexibility with my networking needs.What I ultimately would like to have is to have a switch that I can connect any network device into it and be connected to the office. IE (my IP Work Phone and Computer) Currently I have is a computer with fedora 13 and two network cards eth0 (home network - connected to a router) and eth1 which I would like to connect a switch to. OpenConnect communicates fine and I can see the work network from the Fedora machine. It creates a vpn0 tun/tap device and I don't know how to pass communication to/from the eth1 device.

Do I try to iptables the ports for the phone and services I need on the computer? Or do I build bridge; and If I do what am I bridging. I have tried making a bridge from eth1 to vpn0 which reply's with unsupported device or something like that.Unfortunately my network skills are bit limited and my office says "it can't be done". Their solution is for me to buy a ASA5505 (or something device) and have a static IP. I would have to make it work as my router and even then it will only DHCP 10 ip addresses; which will cause a shortage of IP addresses in the house.

View 1 Replies View Related

Fedora Networking :: 3G Dongle Doesn't Appear In Network Manager?

Jan 20, 2009

I have run Fedora 9 and 10 on my Dell Inspiron 640m for about 6 months now and generally experience very few issues with it. Specifically I've been running Fedora 10 KDE 64bit since it was launched. Up until I had to reload it a couple of weeks ago my Vodafone Huawei E172 3G dongle worked perfectly with Network Manager. Since the reload the dongle is detected by the OS (lsusb lists it correctly, etc) but nothing I do will make it appear in Network Manager.

I've tried manually configuring a GSM connection then plugging it in, but no joy. I've also tried using it in my Acer Aspire One which runs Fedora 10 XFCE and it work, but when I try it in another Dell Laptop running Fedora 10 KDE 64 bit it doesn't. I'm assuming that a recent update must have caused some issue as it has definitely worked in both Dell laptops in the past. As mentioned I've reloaded recently but the other laptop hasn't been.

I'm unsure where to go from here. I haven't been able to get Vodafone's beta drivers working under F10 (although I did under F9) and can't find any posts on this issue. The version of Network Manager that I'm running is NetworkManager-0.7.0-1.git20090102.fc10.src.rpm, which was released shortly before I reloaded. Chances are I just didn't try my dongle between the update coming out and the reload, so didn't notice the problem before hand.

View 14 Replies View Related

Fedora Networking :: Network Manager Settings All Grayed Out ?

Mar 10, 2009

I'm running Fedora 10. My Network Manager settings are all grayed out. They are uneditable. I can see the detected settings, but not change them. All of the settings fields are disabled.

Is there a way to enable these, so that they can be edited?

Starting with the menu in the upper left corner of the GNOME screen: System/Preferences/Internet And Network/Network Connections

The Network Manager window appears correctly.

I see all automatically generated settings that were created for my various devices:

In particular, I want to be able to edit "Auto vmnet8", for VMware usage.

I know about the workaround of going back to the manual network configuration as used in older versions of Fedora, such as editing the files in /etc/sysconfig/network-scripts/ifcfg-* and then enabling the old "network" service and disabling the "NetworkManager" service.

However, this workaround really won't work in this situation. The VMware interfaces, vmnet1 and vmnet8, are virtual interfaces that *only* exist when the VMware services are running. The VMware services are started *after* the old manual network configuration would be applied. So, at the time the scripts in /etc/sysconfig/network-scripts are processed, the vmnet1 and vmnet8 devices do not yet exist! I'm hesitant to change the numbering of services, lest other things break (VMware on Fedora 10 is rather fragile already).

I love the feature of NetworkManager to be able to automatically apply settings to newly materialized network devices (such as vmnet1 and vmnet8 when VMware is loaded). However, I need to also be able to edit those settings.

Is there a solution that will make my Network Manager "Edit" window not be entirely grayed out? I can see the settings pages just fine, but unfortunately, they are all disabled and I can't edit them at all.

View 11 Replies View Related

Fedora Networking :: Network Manager Connects With 'auto Eth 0'

Jun 23, 2009

I got a little problem with network manager. I got two connections in it, with two different DNS-Servers, because the one of my provider is very slow I surf with opendns, but sometimes that slows down too, so I want to change if necessary. Both connections got the same fixed IP.That worked all fine, until I got my new router (it's a Netgear WGU 624). It's connected by cable and I configured it like the old one. But for some reason instead of connecting to the manually configured connections, my fedora 10 creates a new one "auto eth 0" with a dynamic IP. So every time I boot or switch on from standby my PC connects with this one and I have to manually set it to the right connection. There's no chance to edit or delete it cause those two buttons are grey and won't work. I also tried restarting network manager manually and I also tried starting it with su as root.

View 14 Replies View Related

Fedora Networking :: Restore Network Manager Applet?

Jul 20, 2009

I lost my network manager applet after removing kde-desktop. restore it, as I dont find it in add to panel applications I dont have any clue, also how could I add bluetooth applet in notification area.

View 5 Replies View Related

Fedora Networking :: Network-Manager PPTP Add Routes

Jan 13, 2010

I currently managed it to get a pptp-connect to my home network. now I have another little problem. NetworkManager always routes the whole network traffic over my home network if i am connected to the home network.If i set the "Use this connection only for resources on its network" I have do manually say:

Code:
route add -net 192.168.1.0 netmask 255.255.255.0 dev ppp0
After that only the correct traffic runs over the vpn. Now my question is it possible to setup the route via the networkmanager gui?

View 3 Replies View Related

Fedora Networking :: Completely Remove Network Manager?

Mar 27, 2010

After an update in mid-February I can no longer get Network Managero run anyinterface. I tried downgrading ppp, but that did not help. I have tried to delete all devices, but there is no user interface from which I can do that. Network Manager does not appear in any system tray. I even did a complete remove and reinstall, to no avail.This is true on both 32 and 64 bit Fedora 12, and on laptops, desktops and VBox VMs.Here is what I see in messages.log:

Code:
Mar 27 12:09:46 vmf11x64 NetworkManager: <info> Activation (eth0) Stage 4 of 5 (IP6 Configure Timeout) scheduled...

[code]...

View 14 Replies View Related

Fedora Networking :: Connection Sharing With Network Manager

Dec 21, 2010

I'm trying to share internet connection with my wifi capable mobile device. For that I'm creating ad-hoc wifi connection in networkmanager with 'shared to other computers' ipv4 option. And there is the problem - the device cannot get the setting via DHCP. The firewall is adjusted properly by NM, dnsmasq is started. I've looked at dnsmasq arguments string and found that the temporary config file which is provided by NM is empty. So, where else should I look for a possible reason or should I just post a NM bug?

View 6 Replies View Related

Fedora Networking :: No Wifi Option In Network Manager

Feb 22, 2011

I just installed F14 today, all day I have been trying to get my wifi to work, I keep running in problems I found many threads with links to download drivers. I did that and in the README file loses me. It talks about compile driver from the source code.

PHP Code:

View 7 Replies View Related

Fedora Networking :: Network Connection Manager Gone / Not Working

May 15, 2011

Fresh install of Fedora 14 from Live cd.Used it for an hour or so, d-loaded some programs, had ti all running great. Wired connection to internet. Had the Network Connection Manager icon in panel. There was an icon saying new updates, alot of them, like 400 or so. Told it to go ahead and up date, left room. Came back hour later was done, said it needed to re boot, so I did. From then on, no internet, not icon, no Network Connection in the drop down list for preferences.

What I have tried:Worked off live cd, again, all works fine, icon, manager, internet all there.In installed version: In terminal, typed service Network Manager, it said unrecognized service.Did yum install network manager. It started to do it, but looked like it was trying to get stuff off mirrors, and of course there is no internet access. error PYCURJ ERROR 6.Of course I can re install, but I figure I will just end up in the same place a few hours from now.

View 6 Replies View Related

Fedora Networking :: Ipw3945 - Wpa_supplicant - Don't Want To Use Network Manager

Jun 26, 2011

I have a laptop with ipw3945 on. I don't want to use Network Manager. this is my wpa_supplicant.conf

PHP Code:

[code]....

I do as root:

PHP Code:

[code]....

In another terminal as root I do:

PHP Code:

[code]...

but no IP address got.

View 8 Replies View Related

Fedora Networking :: Does Network Manager In F15 Support Bridging

Aug 24, 2011

does Network Manager in Fedora 15 support bridging and if so, can you configure the bridge using your wireless interface? All of the information I've come across so far said that you can NOT create a bridge using a wireless interface, and that Network Manager doesn't support bridging, but this info was also from Fedora 12 and below, so I don't know if it's still relevant for Fedora 15. I would certainly hope that by now you can make a bridge from a wireless interface. Even the lowly VMware Player offers this option.

View 2 Replies View Related

Networking :: Unable To See Tkip Or Aes On Network Manager On Fedora 13?

Sep 23, 2010

I am running Fedora 13 and using Ndiswrapper with my pci wireless card. my router is a netgear wgr614v9 wireless router with wpa2-psk. When I try to connect to my network the only options I see for security are dynamic WEP (802.1x) and WPA &WPA2 Enterprise and for authentication all I see is TLS LEAP Tunneled TLS and Protected EAP (PEAP). I can connect to my network when I drop security on the network but other wise I am stuck. I have been trying to fix it for about a week now by myself to no avail

View 6 Replies View Related

Fedora Networking :: Fedora 15 - Virt-manager Network?

Aug 30, 2011

I'm a new fedora-user and are having some problems setting ut everything as i want:

The host to always use WIFI
The host to not see the ethernet-connection.
The guest to use ethernet
The guest to be able to get wifi when no ethernet is avaible.
The guest to install from PXE

The guest is going to be a Windows 7. Nothing is done so far, as i cannot figure out how to do this.

View 1 Replies View Related

Fedora Networking :: Network Manager Disconnects After 2-3 Seconds But It Works / Fix It?

Jul 3, 2009

I'm currently on F11, and experienced problems with Network Manager. Whenever I to connect to a network, wired or wireless, it just seems to try to connect, and then after 2-3 seconds, it just reports "Disconnected"..

Then I switched to network, and both wired and wireless works. so I don't think there is any driver or hardware issue...

Does anyone have any idea of this problem? The network manager have worked on the live CD version ( before installed to HD).

View 12 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved