OpenSUSE Network :: Cannot Write PAM Settings (abug Or Configuration)?
Feb 13, 2010
I'm using openSUSE 11.2 (GNOME), When I go to yast and if I try configuring Fingerprint Reader or Windows domain membership I get the following error
Code:
Cannot write PAM settings
I want to understand whether its a bug or something related to configuration. When I
[code]...
View 2 Replies
ADVERTISEMENT
Nov 11, 2010
Linux beginner, first project is a NAS based on Debian Lenny. Have SMB and AFP running. Hooked to a gigabit network. 8 disk RAID6 with mdadm. Need the NAS to back up our production company's video files.First attempt at back up was very, very slow on smb and afp. Used a Mac disk benchmark app, shows 100+MBps reads, but only .4MBps (as in 400kbps!) writes. Went through office LAN, and also tried just cabling the two machines (MacPro and Debian NAS) directly. Same results. Not sure what the write speeds are internally, as I don't know of any Linux/Debian disk testing software.
View 8 Replies
View Related
May 8, 2010
I am running Slackware 12.2.
I have checked the file like /etc/rc.d/rc.inet1.conf, and the command 'ip' or 'ifconfig', but still can not figure out how to write a script to switch between two network configurations easily.
Suppose that one configuration uses DHCP server to dynamically give the ip address, and uses a Default Gateway 1.1.1.1, a net mask 1.0.0.0, a DNS server 1.1.1.0;
and in another configuration the Ip address is fixed, and use a Default Gateway 2.2.2.2, a net mask 2.0.0.0, a DNS server 2.2.2.0;
Anyone would like to give me a hint on how to write one (or two separate) script(s) to switch between these two settings?
View 4 Replies
View Related
Apr 13, 2010
if you try to browse the web from the machine, or log in through a nomachine (nxclient/nxserver) session, it claims there is no internet conenction. You have to run System|Administration|Network and select the stored "Location" for our wired connection. There does not seem to be an option to make this (one and only) "Location" the default. If the machine is up and incoming connections are possible (samba & apache), surely outgoing connections should be working without extra fiddling?
The issue with nxserver (nomachine) becoming unavailable on a re-booted unattended machine (unless someone logs in AT THE MACHINE and runs System|Administration|Network) is causing problems for remote access.
View 2 Replies
View Related
Jun 3, 2010
I need to set up a little virtual network with Debian Lenny guests (the host is Debian Squeeze, but I don't think it matters). I installed Lenny in a VM and it works fine. Then I cloned the hard drive, garion@Laptop:~$ VBoxManage clonevdi Linux 1.vdi Linux 2.vdi created a new VM with exactly the same settings as the first one and booted the new disc. The problem is that there's no eth0 in the new VM, but it is in the original one. Also if I "unplug" the cable, dmesg won't notice anything. In the original VM it works fine. They both have the same virtual network card: PCnet-FAST III (Am79C973). I've also tried NAT as well as internal network settings.
View 2 Replies
View Related
Nov 4, 2015
I got this message when I tried to get in WifiSettings.
"The system network services are not compatible with this version"
What should I do?
View 1 Replies
View Related
Nov 17, 2010
I deleted the firewall files "K09SuSEfirewall2_init", "K01SuSEfirewall2_setup", "S11SuSEfirewall2_setup" and "S01SuSEfirewall2_init" from "/etc/rc.d/rc5.d" in order to disable the firewall when rebooting.
As a consequence all network services are not working. I can't connect to any other machine nor to the internet.
I rebuilt the symbolic files based on the ones for runlevel 3, but still no network services are available.
Any suggestions how to make it work again? I'm using Suse 11.3.
View 9 Replies
View Related
Jul 17, 2011
I installed openSUSE on one of my work system. The network port wasn't working when I was installing, but works fine now (checked in Windows). But for some reason, I am not able to configure the network. I used both Dynamic and Static IPs (both work fine in Windows) but still no go. I am using Yast Control Center for this purpose. I can't even ping the default gateway when I am using custom settings. When I use dynamic settings, it says Unreachable Network.
View 7 Replies
View Related
Jan 31, 2010
I've updated a desktop from 11.1 to 11.2 with the NET CD. After completion everything worked fine, though I have some issues with the NIC. been looking on the net and the provided solutions haven't been able to resolve the matter. After reboot I don't get an IP address, I go into Yast2 and network settings displays:
I have to delete the unknown device everytime after a reboot in order to get a new IP address. After that all works as it is suppsed to. I've been looking into the /etc/udev/rules.d/70-persistent-net.rules and deleted all that was in there,
View 6 Replies
View Related
Feb 9, 2010
I have a desktop computer running OpenSUSE 11.2 with two network cards installed. I would like to use both cards for connecting to the internet using different networks. The setting would be the following: eth0 is the main (default) card, almost all programs should use this NIC for connecting to the internet. eth1 is used only by a few programs, which have setting for selecting which network interface to use. The two NIC's are connected to different networks, so the IP address of the NIC's, the related subnet masks and gateways are also different.
Saying short, I would like to have the two NIC's as they would be in two separate computers. I can set the IP address and subnet mask of the NIC's. The main problem is that I can only declare one gateway. How can i setup this? I do not use network manager, I configure network cards using yast, but if needed I can of course use ifconfig directly.
View 9 Replies
View Related
Apr 20, 2011
I can't access any of the wired network settings and theres a red square with an X through it. Here are some snap shots. This is really funky.Is this red box with the X suppose to be here?
View 3 Replies
View Related
May 7, 2010
I was configuring my visual settings and thinking that my pc could handle the max setting I enabled it. Now I cant see or do anything. Is there a way to reset them???
View 2 Replies
View Related
Feb 26, 2010
I want to change DNS settings. How do I make it from yast?
View 1 Replies
View Related
Jun 29, 2010
i have client and server PCs, both with openSuse 11.2.
on the server side, i have mounted HD partition to /vmshare dir. relevant line in /etc/fstab reads:
Code:
/dev/disk/by-id/ata-WDC_WD3200AAJS-07B4A0_WD-WCAT16493946-part2 /vmshare reiserfs user,acl 1 2
i want to export /vmshare dir via nfs. i have configured it through yast and resulting line in /etc/exports reads:
Code:
/vmshare *(rw,root_squash,sync,no_subtree_check,crossmnt)
the permissions for this directory is drwxrwxr-x root vmshare.
i can successfully mount the exported dir on client side, i can move between directories and list contents, but i can't write into it (not even as a root). on the server side, i can write to the directory only as root. the vmshare group is created on both machines with same gid as well as all users have same uids. firewalls are down.y.
View 3 Replies
View Related
Sep 15, 2011
Using SuSE 11./4 on two machines. Successfully set up a server to share a folder. The client is able to read files from the folder, but not write to them.the client perspective, the shared folder permissions are read and write if owner, read only for all otherHowever, the server shared folder has been set up for sharing, and the permissions are set for read and write to all.
One more thing. When the client goes into the samba share, it sees the workgroup. Clicking into that, it sees the name of the server computer. Clicking into that,it sees two folders: "profiles" and "users". Clicking into "users" goes into the shared folder. I tried setting the permissions from the client side on the "users" folder using root privileges to allow reading and writing without any success
View 6 Replies
View Related
Jan 8, 2011
once upon a time i manually entered my ISP's DNS servers in /etc/resolv.conf Now i have changed ISP, my old DNS setting are still present even though i have edited my resolv.conf file to my new ISP's DNS servers. Internet still works fine, i just want to use my new ISP's DNS as my old ISP will be closing its doors very soon. Am i doing something wrong, or better put.forgot to edit another file..? I did do this a while ago, so i apologise in advance for my incompetence. I'm stilling running 11.1 / Router has DHCP configured. my resolv.conf file is below
Code:
cat /etc/resolv.conf
### /etc/resolv.conf file autogenerated by netconfig!
#
# Before you change this file manually, consider to define the
# static DNS configuration using the following variables in the
# /etc/sysconfig/network/config file:
# NETCONFIG_DNS_STATIC_SEARCHLIST
[Code]...
View 9 Replies
View Related
Sep 16, 2011
I installed openSuse 11.4 (KDE). It was excellent - everything was working great except for Subversion which use to work fine on 11.3 (command line is broken on 11.4, Eclipse/Subclipse works fine on both).
Subversion kept going to the proxy server instead of going directly to our internal Subversion server. I tried (1.) setting the proxy settings in Yast with excluding for our Subversion server, (2.) tried adding the usual settings in ~/.subversion/servers (which worked fine in 11.3). I could not check out on the command line from the local server, I can check out from external servers, eg: Google.
(I installed from the live CD download. I think this is using something some plasma widget thing for the network management.) Why is Subversion not using the usual ~/.subversion/servers file for its settings in 11.4 (KDE)? What is it using and how can I make it not use the proxy server? (Someone else mentioned his Subversion only started working after he used some Chrome plug-in to change the proxy settings but had no idea why?)
View 1 Replies
View Related
Jan 24, 2010
I have installed my Konica Minolta mc 2430dl printer (opensuse 11.2 x64).
View 2 Replies
View Related
Mar 27, 2010
I have a Canon MX860 network printer but I cannot get it to connect with my openSUSE 11.2 computer
View 9 Replies
View Related
Jun 19, 2010
i am using intel hardware on this working on suse linux 10.2 . i am not able to configure the network card IP address I have tryed using dhcp and static both way. Currently intel DG41RQ network card is assembled in my system. by using command ifconfig i can see only lo but eth0 is not displayed their.
View 4 Replies
View Related
Dec 12, 2010
I've just installed OpenSuse 11.3 on my new laptop but I've skiped the network configuration during the installation of system, but after that when I use the command : dhclient eth0 I'll be connected without any problem except when I reboot the system, I should retype the command to connect
View 3 Replies
View Related
Aug 28, 2010
If I configure my OpenSuSE 11.2 system to use a proxy server in the YaST Proxy module, do I still need to configure my browser (i.e Firefox) to use these proxy settings, or is it done automatically under the covers?
View 1 Replies
View Related
Dec 22, 2010
If you cannot connect with Skype, don't change your settings. The problem comes from Skype. Google for Skype outage.
View 4 Replies
View Related
Jan 17, 2010
This is a follow-on to "samba write failure crashes linux". It has the dmesg output when the write failure occurs.The remote server is os/2 v4.50 fp3.The failure occurred in this instance attempting to write a file from the localhost to a samba-mounted resource on a remote host. The failure always happens when at least 3 MB have been transferred. Smaller files are not a problem.
Other cases:
1. Saving any email (thunderbird) attachments to the localhost,
2. Downloading anything to the localhost using Firefox.
The most notable aspect are the phrases "kernel BUG" and "invalid opcode".
[Code]...
View 1 Replies
View Related
Jun 4, 2010
I had set up a Samba server on SuSE linux a few years ago with a single shared directory. It has been running fine ever since, surviving various system upgrades and hardware migrations without ever needing to change the configuration (well, maybe once or twice). However, since a few weeks ago, it refuses write access to the share. It just returns NT_STATUS_ACCESS_DENIED when I try to create or write to a file. That's also what /var/log/samba/log.smbd says (nothing more AFAICT). It's the same for all clients, i.e. remote Win XP PCs or local smbclient.
The funny thing is that it allows write access immediately after rebooting the server, but after a while (the next day or so) it refuses again. Restarting smbd or nmbd doesn't change anything here. I suspect that this started after installing the latest security updates for OpenSuSE 11.2 on May 17th. The new packages were (according to /var/log/zypper.log):
xorg-x11-libXext-2379.noarch
libmysqlclient-devel-2315.noarch
openSUSE-build-key-2398.noarch
libpython2_6-1_0-2213.noarch
libpng-devel-2159.noarch
Somehow I can't see which of these might have an influence on samba. But I am absolutely and positively sure that I didn't change anything else. I logged into the server only once in months, and all I did was doing the updates using the updater applet.
View 3 Replies
View Related
Nov 8, 2010
I have installed opensuse 11.3 64 bit. For many years was able to connect to a file server within our domain via konqueror in all previous versions of opensuse using: smb://user@server.ip.adress/userdata/user_name/
This would ask me a password and then I would be able to move, read, create and delete files. I never configured samba on the linux client because this method always worked. However very recently (I suspect since I installed 11.3) I am facing a problem I cannot resolve. I can still log in, browse the remote folder, read files, create new ones (for example a txt file), delete them, but I cannot copy into that remote folder files larger than about 20KB (I try copying or moving files by dragging them from my desktop into the konqueror window that shows the remote folder contents).
Small files are OK, but for files are larger than ~20KB there is an error saying: Could not write to file smb://{path_to_my_file_in_the_remote_folder}. Strangely, the file is nevertheless created in the remote folder, but with a fixed length size of 32KiB.
View 2 Replies
View Related
Apr 20, 2010
I have a work desktop plugged into the work network. As I opened my firewall settings I noticed that it is turned off. My question is how should I configure it? I saw that the interface isn't assigned to any zone... I should assign to internal zone and open some port that I need in order to work? There are some guidelines for configuring the firewall?
View 2 Replies
View Related
Sep 13, 2010
i just installed open suse 11.3 after using linux mint 7(based on ubuntu 9.04).i am currently using two internet connections at home, the first is a vodafone mobile modem, which is workind excellent, and the other is a LAN network, that on windows uses a *.exe program to run. i managed to make all the IP, NETMASK, DNS settings and the internet connected, but without the .exe program it just disconnects after 10 minutes.this is the same thing that happens with the connections on windows if i start the computer and not run the "net.exe" program, but if that program is running the internet connections works just fine. i tried using wine to run net.exe, but it just gives an error message.
View 5 Replies
View Related
May 8, 2010
i installed suse (KDE) on my old notebook and now I'm trying to get the wlan to connect to our router and can't figure out how to get it to work. My card seems to work, the network manager even finds the router, but i just cant get a connection. I followed the steps of the "Getting Your Wireless to Work" thread and these are the results:
[Code]....
- i messed around a bit with the network settings and might have cluelessly broken something (or broken it more)
- i tried a usb-wlan-card as an alternative, which didn't work either, but could possibly have messed things up even more.
View 7 Replies
View Related
Dec 16, 2010
I have a laptop running OpenSuSE 11.2. I use the Yast menu to set up network settings via "traditional" ifconfig setup (not NetworkManager), because I found NM unusable in prior releases when doing network gymnastics such as router re-flashing, LAN reconfiguration, etc. where I needed control of the IP address, netmask, DHCP, tftp, etc. My laptop works fine with Yast "traditional" ifconfig configuration for eth0 connected to router to Internet. Works fine with Yast ifconfig configuration for USB WiFi as wlan1 to WiFi router to Internet. Also works fine for virtual machines on vmnets NAT-ed to the Internet. Works fine as long as there is only one network connection, that is.
Now, I have a second laptop. I want to network laptop #2 eth0 to laptop #1 eth0 for file transfer and/or Internet access WHILE laptop #1 is is linked to the Internet through wlan1. Unfortunately, I have not figured out how to get Yast/Network Configuration to do that. I have not been able to get Yast/Network Configuration to see both wlan1 and eth0 at the same time--when the Yast utility finishes, I do >ifconfig and >route, and I find that I have lost either eth0 or wlan1. Thus, when I do direct-connect file transfers, I loose the WiFi Internet connection on both machines.
I suspect that it might have something to do with Yast/Network Configuration utility not being able to handle two network interfaces on the host with different IP addresses. how to properly put an OpenSuSE machine on two networks simultaneously? And then how to turn on IP forwarding so that I can use laptop #1's WiFi as an Internet gateway for laptop #2?
View 1 Replies
View Related