I have a external harddisk attached to my linux PC.I have a laptop having windows 7 on my network.I want to to be able to open up the folder in the external harddisk(linux partition) and check the files from my laptop. People suggest samba. But I am not able to configure correctly. Please excuse me and give me few detailed instructions.
View 4 RepliesWhen in Thundar (on XFCE - Debian 8.2) and I click the "Network" icon in the left sidebar the following message is displayed.
Failed to open "/ on". Specified location is not supported.
Like the forum for #1I'm using debian 5.0 with a modem to connect to the internetand eth1 to network my home computers. When I try to browse the internet with Konqueror, I have to disable eth1 then wvdial just to browse the internet. How do I fix this?Note: My resolv.conf has my primary DNS address in it, for my ISP (nameserver 67.211.172.29) and so on.
View 2 Replies View RelatedI have a new Debian 5.04/ppc install on a G5 tower and it's not able to browse the local network. The clean install could see the network, then I installed the Samba server, and it hasn't worked since. Samba server never really worked, and I'm guessing I messed something up. I've reinstalled network-manager, and removed / reinstalled samba.
I have a small home network (6 machines) running wired and/or wireless, pc/mac and linux.This machine can PING other machines by name and IP address.This machine can PING itself by name and IP address
Other machines can PING this machine by IP address only, not by name.Nautilus network browser only shows the "Windows Network" icon, which, when clicked, shows an empty window.I've got networking up fine on all my other machines but this one is stumping me.
I recently did a clean install of Debian 5, and a backup program called BackupPC. Both machines are on a small local network served by a router. Both machines have statically mapped IP addresses, done by the router via matching MAC addresses in a table of corresponding IP addresses (192.168.0.2 (HP-PC-XP), 192.168.0.3 (Debian). I configured Backup PC correctly (I think)...Upon running Backuppc, the first thing it tries to do when its time to run a backup is to ping the machine to be backed up. The name of the PC is stored in a backup pc config file. (I believe BackupPC does a DHCP request with the machine name to get the ip address, but not sure). Running the backup results in BackupPC tells me that it can't ping my xp machine. If I open up a terminal window in debian, i can successfully ping my xp machine when i use the ip address. 92.160.0.2 If I ping using the host name of the xp machine (e.g. HP-PC_XP), the ping command displays some ip address i've never seen...something like 63.123.155.104....how is it getting that and how can it be corrected?
I recall that nslookup looks at the local hosts file first to resolve the name....i look in my hosts file and found no such address (only contained localhost)....now what?
I'm attempting to use a network bridge to connect my virtual machine, like so:
[Code]...
The issue is that when I type the following command, I get the further following horrible error message that doesn't seem to really point me to anywhere and I can't seem to find any relevant information to my problem on the web:
root@darkstacks:~# qemu-system-i386 -hda test.img -m 128 -curses -net nic -net tap,ifname=tap0 warning: could not configure /dev/net/tun: no virtual network emulation
Does anyone have any idea what I need to do here? My processor does not have the vmx flag, as it's a 2.4GHz P4. I don't know if that might have something to do with it.
I'm running kernel release 2.6.26-2-686 on a i686 and are trying to share files between my machine and some Windows 95/98 machines. When I enter smb://ip_number/share_name in Nautilus, it works. I can browse the files. When I try the same with smbclient or smbmount, it complains.
smbclient -I=ip_number -L=//server/share gives cli_rpc_pipe_open: cli_nt_create failed on pipe srvsvc to machine tf_calibration. Error was ERRSRV - ERRerror (Non-specific error code.)
I have a fresh install of CentOS 5.5. I am trying to browse to the Windows machines on my network (Places > Network Servers > Windows Network), but I get a blank window. I am able to ping the Windows machines using their IP address, but not by their name. What do I need to do to be able to see the Windows machines and also to connect to shared folders on these machines? So far I have tried starting SMB (via System > Administration > Server Settings > Services). I have also tried changing my smb workgroup to "WORKGROUP" (the default was mygroup which did not match my Windows machines.
View 8 Replies View RelatedUbuntu 9.10 now, before 9.04 was installed. On both versions I was unable to browse windows network - when I visit corresponding icon in nautilus, I see error message:
??????-???? -- ???????????? ??????.png
Looks like some service was missed at startup and not running.
Though File Manager allows me to browse Windows network directories ( Ctrl-L shows a path like smb://diskstation/mikeother/Web/Alta_Vista ), I can't figure out how to browse to them in applications like Firefox, which doesn't show "Network" as an option when doing File > Open. How can I browse to the Windows network within FF?
View 9 Replies View RelatedSuddenly having trouble browsing the Windows Network with Nautilus.I can still mount a windows/samba share with cifs, but I don't want to do this because symbolic links within in the share do not work correctly. I can still browse the share with smb:// in a web browser.
View 1 Replies View RelatedI have a Western Digital 3TB USB drive connected to a Raspberry Pi 2 running Raspbian Jessie. I created an 30GB ext4 system partition and a NTFS Data partition using the remainder of the drive. I formatted the NTFS partition as follows:
sudo mkfs.ntfs -Q -L Data /dev/sda2
The drive works fine on the Pi but when I connect it to a Windows 7 pc the pc doesn't recognise the format of the Data partition and can't access it.
On the Pi I ran:
$ sudo fdisk -l /dev/sda2
Disk /dev/sda2: 2.7 TiB, 2968557453312 bytes, 724745472 sectors
Units: sectors of 1 * 4096 = 4096 bytes
Sector size (logical/physical): 4096 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
[Code] .....
Partition table entries are not in disk order.
After doing updates to get current with Debian Jessie, I've noticed very annoying network problems going on.
This all happened while also setting up a media server box which led me to much confusion, much of what is described here [URL] ....
I've started this new thread to try to diagnose and properly take care of this specific problem alone:
Browsing the internet becomes very slow, unbearably to the point everything keeps loading up forever. This only happen while having a torrent application opened, the effects are almost immediate, closing the application and browsing resumes as normal.
How about throttling back torrent? This does not work, it even doesn't even need be at top speed. With bare minimum connections and speed will still lead browsing to a crawl.
Even so, every other device on the network is un-affected, router and other PCs continue to browse and respond very well, making it a specific on the computer in question (but also happens on my other debian jessie machine).
Can I even reach the internet? Yes I can, and this is the weird part... I can ping, solve DNS and almost everything else without issues, the only thing affected is actually browsing the internet.
I'd even setup DNS cache with dnsmasq to see if it could speed things up. Disabled ipv6, and trying pretty much every method I could find.
Having pretty much ruled out dns problems and internet connectivity, I'm at a loss for what to look for and try. Only symptom I can describe now is that the browser will start to load up webpage but never completes... but only while torrent is active.
My current setup:
I'm on Debian Jessie, a desktop with eth manually connected. Using dnsmasq for dns caching. Disable ipv6 on the network (by the way, it keeps disabling it self I dunno why).
Running KDE with ktorrent as the client. The same thing happens on my setup media box, also Debian but with deluged running instead.
Browser in question are Firefox and Chrome, both have issues with this.
Turns out it was just a setting in my own router, that apparently limits numbers of connections made, meaning while torrent is working other connections were sure dead.
But it also happens when lots of connections are being made in other ways too. The router in question is Humax HG100R-L2, provided by my ISP. The setting is in the firewall section called IP flood detection.
I need to set up a Debian server in a windows network so that users can securely ftp docs to the Debian server and then pull docs from the server when needed - using a secure ftp session. I have the Debian Server built and IP'd. Do I just need to set up the vsftpd.conf and thats it? Right now I am just concerned with getting ftp working.
View 7 Replies View RelatedI would like to connect from squeeze to my windows network. Do I need samba server, smbclient is already installed?
If I do a doubleclick -> Windows Network then get "Unable to mount location".
If I use -> Connect to Server -> Windows Share then it works well.
How to configure samba server that I can see Windows machines in "Windows Network"?
I noticed tonight when I go to Places, Network, it will bring up an icon for Windows Network, and I can drill down to my Windows box. But I can't see the other Linux box (a laptop running Kubuntu), and the same behavior occurs on the laptop when trying to view the Linux desktop. The laptop is connected wirelessly, if that makes a difference. Each box can ping the others, but I don't yet know how to browse one Linux box from the other Linux box.
View 1 Replies View RelatedI want to browse files (including music) on my iPhone5s from my PC, which is running Debian 8.2 "Jessie" with MATE desktop environment.
I ran Code:
Select allsudo apt-get install bluetoothctl in the command line, then after I run Code: Select allbluetoothctl,
I did this:
Code: Select allpower on
devices # To get the iPhone's MAC address
scan on
agent on
discoverable on
pair IPHONE_MAC_ADDRESS_HERE
trust IPHONE_MAC_ADDRESS_HERE
connect IPHONE_MAC_ADDRESS_HERE
I can connect Debian and my iPhone just fine, but where do I go from there?
How do I browse my iPhone's files from Debian?
I've also posted this on Unix Stackexchange [URL] ....
I'm not able to connect to my university's internet facilities under openSUSE 11.4. I have been able to connect in the past and I am still able to connect in Windows 7.When I try to connect to the university WiFi, a valid IP address is assigned to me and the gateway address appears to be correct, so I don't see a problem in the DHCP negotations. Same with my university's Ethernet: I get a valid IP address, but I can't connect to the internet.When I browse to any site with Chromium/Chrome/ Firefox/lynx/curl, the page is stuck at "Sending request". I have tried disabling my firewall - that didn't solve anything.I don't know what else I can try and the campus' network administrators are puzzled. How can I resolve my issue?
View 7 Replies View RelatedI had run one script in unix machine and want to copy the results to a windows machineBoth the machines are on different networksIn linux machine trying to do the ftp to the windows machine its giving connection refused. How to chech whether ftp is running on that linux machine or not?Also tried scp and ssh , both are failing
View 6 Replies View RelatedI try to connect my Debian Jessie to my Windows share
This is what I have done:
-> 1 - create an .smbcredentials file located in my /home directory (with account / password and domain)
-> 2 - implement /etc/fstab with information like that :
//192.168.x.x/Animes/media/Animes cifs uid=toto,dir_mode=0777,file_mode=0777,credentials=/home/.smbcredentials,iocharset=utf800
and when I try to go on my windows share, I have this message:
An error occurred while accessing 'Home', the system responded: mount: only root can mount //192.168.x.x/Audio-Video-01 on /media/Audio-Video-01
I think about one thing, if uid=toto is different in fstab than my current debian account session name, it is possible the problem came because of that?
(fstab, uid=toto and current session titi)
I've configured Debian 8.3 on AMD quad cores Opteron, for change, i've choise XFCE4. The desktop work fine, but thunar doesn't browse my local network, i cannot see my other computer ! I think there are missing an applet ? but whitch it ?
View 2 Replies View RelatedEvery time i try to click it, in the file manager, I get the error failed to open "/ on" The specified location is not supported.
I need to be able to connect to my storage server...
I'm having a installation problem. I am trying to install Ubuntu on my laptop that is currently running Windows 7, and win7 is needed for use in projecting songs in our church services. The HD is a 500 gb already partitioned with the max. of 4 partitions. Win7 files are on the sda2 partition and my data files are on sda3. Sda1 and sda4 are smaller partitions, one is 3 gb's the other is 1 gb.
My question is, what is the best set up for me to install Ubuntu? I can't create an extended partition since I already have 4 partitions. I like my current partition set up as far as windows goes, but I would really like to get Ubuntu installed. I'm fairly new with Ubuntu, I like what I've seen so far. I had it installed with wubi in windows XP on a laptop that I just sold, and I've upgraded to the windows 7 laptop now, and I'm stuck!
I have a small network,all my machines get their IPs dynamically in 192.168.0.0 network When I ping linux machine fron win7 or win2k8, linux responds. when I try pinging any machine from linux it says "unknown host sierac".
Recently, I created a new linux machine, linux machines can not talk to each other if I dont add their respective ips in the host file, but both of them can be contacted by windows machines through ping or remote desktop.
I am starting a MCSE course and part of it is to create and configure a domain etc etc I have done this and all my windows XP and 7 machines on my LAN are now functioning as part of the domain just great.
Unfortuntely, I have several Open suse machines which are currently not part of the domain yet (they are in a basic Workgroup).
get these computers onto the domain so that a user can log on using their domain credentials and I can apply security policies and what not?
Can I SSH from a windows machine out of my LAN network to a Linux Server inside my home LAN network?
View 6 Replies View RelatedI have known for a while that my puny Celeron 633 box is running an SMP kernel but I didn't care until now. I do not remember installing any SMP kernel. It would not have made sense.What should I do to make sure I'm running a uniproc kernel? I wanted to edit config-2.6.26-2-686 and change all the lines ending in SMP=yes to SMP=no but am not sure what this will do.
View 1 Replies View RelatedI cannot remote desktop to the Debian machine from anywhere,hether within the same network, or on a different network elsewhere. Also, the personal wiki I set up on it to be viewed via a normal web browser cannot be accessed, either. Both time out when attempting to connect to them. I can still ping the Debian machine when on the same network, though.
This started some time ago when we had a failure occur on our main server.had to powercycle everything in order to restore things back to normal, the Debian machine included. Since that time, this problem started to occur. This is a major thorn in my side in attempting to prepare for our website to move,I've been unable to figure out how to fix it.Originally, I thought it would be something in between the Debian machine and anything else, which would mean something like our firewall box or our hardware switch was the problem. But the tech support people who maintain those for us confirm that there is nothing wrong with them, so now I'm not certain anymore.
My sid machine currently can't access debian.org, through apt hitting the repositories, surfing through Epiphany or Iceweasel, or pinging the server directly. It was working fine until about four days ago. However, if I type in the IP address, I can access the website, so it must be some sort of DNS issue. My home server, running Squeeze, can access debian.org just fine. Any suggestions for how to fix it?
View 1 Replies View RelatedI've installed newest Debian (Squeeze) and then on fresh system made instalation of VirtualBox OSE as it is written on http://wiki.debian.org/VirtualBox.
I've also created virtual machine, however when I try to run it I got error message:
RTR3Init failed with rc=-1912(rc=-1912)
Please install the virtual-ose-dkms package and execute 'modprobe vboxdrv' as root
And later on code...