I use openSUSE 11.1 and my YAST can't connect Internet: How to configure my YAST Internet configuration through proxy server in order to download and install the programs (for example dwnld and install WML from [URL])
View 9 RepliesI work with a proxy serverWhen i try to update my system i am not being allowed access. it tells me that i am denied access. what can i do?
View 7 Replies View RelatedProbably because I don't know what to put in some of the fields.So; all I want to do is to run my own e-mail server for my business. The network is set up, the web server is running, but I'm having no end of trouble with YAST and the e-mail server.I have a single server running open suse 11.3 32 bit. It is attached to a modem/router. I have a static IP address for my registered domain. The server has a static IP address (192.168.1.8 in this case). My server is NOT running either a DHCP server nor a DNS server - there is no need, since there is nothing else on this box. It has only one network connection - eth0.
I'm trying to set up an e-mail server. I have been unable to get an 'advanced' implementation to work because all attempts to create a suitable server certificate fail. So for now I'll stick with a 'standard' set up.I don't know what I should put in such fields as 'outgoing mail server' (I've assumed I should use the FQDN of my server);I've no idea what 'masquerading' is for or what I should do with it;I don't know what I'm supposed to put in the 'outgoing mail server' in the 'authentication' section;I don't know what to put in the 'downloading' section;and I don't know what 'accept remote SMTP connections' does.I can get the server to start, but any attempt to retrieve e-mail from it ends in an authorisation failure - the syslog shows a sign-on attempt from my 'real' IP address and some form of numeric userid which cannot be found.So, if anyone can tell me what to put in YAST to make it work, I'd be a very happy chap.
Yes, I can telnet to 'my.server.my.domain' 25, so something must be right. But my Linux knowledge is not enough to get it working properly.
My box has to connect to internet using specified http proxy.I have set proxy in both kde control center and yast2 control center. They both tell me the proxy works fine. But when I really try to use yast2 to update my system, it report an error:
Code:
Failed to download ./repo/repoindex.xml from [URL]
History: - [AbstractCommand.cc:195] URI = [URL]
Even I try
Code:
export http_proxy=http://XXXX
yast in command line,the error still exist.
In debian apt-get and slackware slackpkg,my proxy works fine. So I am sure it is not my fault and maybe it is a bug of yast2.
I'm currently running 11.2 and I configured Proxy settings in the YaST module. It seems that when I use a proxy I have problems updating. It can retrieve some files, but while getting others it fails. Furthermore, I can't establish a connection with the timeserver in the YaST -> NTP configuration module.
My question is if there have been changes from this version to 11.3 regarding the Proxy settings.
we have a weird problem with our opensuse 11.2 server installation.
We want to set up a LDAP Server using the Yast-LDAP Server configuriation tool.
This indeed already worked weeks ago until....this week.
Maybe some updates??!
I do not know what happend exactly. The server just does not want to start again and throws following error:
Starting ldap-serverstartproc: exit status of parent of /usr/lib/openldap/slapd: 1 failed
This happend after a little check of the configuration, but without a change, with Yast. Google delivered only "reinstall your box"-answers.
So.. i did that. And now the "mystical" part: The SAME ERROR occurs with a fresh vanilla system with a brand new and simple configuration (certificats, database, pw...the first Yast config dialog...). I did not change the way i set it up.
I remember, when i did this the first time with 11.2 on that machine, when no problems occured...everything was running out of the box (except the "use commen server certificate" option...).
Im new in this world of linux and suse. I have just installed the opensuse 11.2 in a Dell Inspiron 5160. Such laptop has a BCM4306 Wireless LAN controller. When I tried to configure a wlan connection, I found that the firmware was not installed. After looking in different forums, I installed the firmware b43. Now, my wlan card is abled to find the wireless of my router.
I have tried to configure a connection with YAST as well as with Network Manager, but both cases failled. Specifically, when I use Network manager, Im able to see in the applet my connection, how strong is the signal, but I see a yellow symbol (in one forum, such a box is shown with a green symbol).
I have check many time all about the secutity, encryption, and so one and all seems to be correct. But when I open the mozila firefox or the konqueror browser, no chance to surffer in internet. Now Im just a step to become crazy. The drivers are ok, the information about the router and the keys are ok, but in such a way, I am still harmloss.
I'm looking forward to the release of openSUSE 11.4, which I'm looking to install as an Internet facing gateway on a mini-ITX machine with 2 Ethernet cards. As such I've been reading up on the YaST Firewall trying to find out to configure it, and there's one thing I'd like to be able to do: 'stealth' all the firewall ports.
In other words, if someone were to hypothetically do a port scan of my external IP address, I would rather they not know whether any of the ports on my gateway are open or closed, so instead of replying with the status of those ports the packets get dropped. I've been able to do this with a product called Astaro Security Gateway, which I currently have installed on a second hand Dell Optiplex machine, but I am now looking into the possibility of installing this as a virtual machine inside an openSUSE 11.4 host (extra level of security) and would like the same functionality for the host OS.
I am new to using OpenLDAP on OpenSUSE with the yast configure tool. I have used Openldap on Fedora before and there was a slapd.conf file that I could modify. It appears that the yast does something different. Anyway I need to find out what the rootdn password is, but I cannot find it since there is no slapd.conf file.
View 2 Replies View RelatedI will be relocating to a permanent residence sometime in the next year or two. I've recently begun thinking about the best way to implement a home-based network. It occurred to me that the most elegant solution might be the use of VM technology to eliminate as much hardware and wiring as possible.My thinking is this: Install a multi-core system and configure it to run several VMs, one each for a firewall, a caching proxy server, a mail server, a web server. Additionally, I would like to run 2-4 VMs as remote (RDP)workstations, using diskless workstations to boot the VMs over powerline ethernet.The latest powerline technology (available later this year) will allow multiple devices on a residential circuit operating at near gigabit speed, just like legacy wired networks.
In theory, the above would allow me to consolidate everything but the disklessworkstations on a single server and eliminate all wired (and wireless) connections except the broadband connection to the Internet and the cabling to the nearest power outlets. It appears technically possible, but I'm not sure about the various virtual connections among VMs. In theory, each VM should be able to communicate with the other as if it was on the same network via the server data bus, but what about setting up firewall zones? Any internal I/O bandwidth bottlenecks? Any other potential "gotchas", caveats, issues? (Other than the obvious requirement of having enough CPU and RAM).Any thoughts or observations welcome, especially if they are from real world experience in a VM environment. BTW--in case you're wondering why I'm posting here, it's because I run Debian on all my workstations/servers (running VirtualBox as a VM for Windows XP on one workstation).
I just installed openSuse11.4 KDE in dual boot with Win7. I have observed that Firefox can open websites but in contrast to this, whenever I try to install rekonq web browser (thats because I find Firefox the slowest browser presently available on earth), Yast says about 593 MB of data to be downloaded and installed. It starts with 3.2 KB/s (or even lesser) speed and further decreases to about 1.3KB/s speed and then ... just stops there (waited for 2-3 hours for downloading just 4-5 MB of data).
View 9 Replies View RelatedIf I configure my OpenSuSE 11.2 system to use a proxy server in the YaST Proxy module, do I still need to configure my browser (i.e Firefox) to use these proxy settings, or is it done automatically under the covers?
View 1 Replies View RelatedAutomatic Proxy Configuration via DHCP | AGIX Linux Tutorials & HowTo's | Ubuntu Focuson openSUSE not work, Why? # These 2 following lines are the key to your pac success:option local-pac-server code 252 = text;option local-pac-server "http://192.168.1.254/wpad.pac";
View 2 Replies View RelatedI am trying to configure a wireless connection from YAST under the Network Settings tool.It doesn't seem to do anything. My USB wifi device is detected in YAST > Hardware and I am using the module it says Hardware is using. It doesn't seem to save the module under YAST> Network Settings> Network Card Setup. Is this tool broken or useless? It seems setting up WiFi should be easier than this. YAST should work shouldn't it?
View 9 Replies View RelatedI am having opensuse 11.0 installed. I have BSNL BB plan with "Always on" connection. How to configure internet connection in opensuse11.0 ?
View 1 Replies View RelatedThis morning I was configuring a DNS server through Yast at home, I've done it once before (in another wireless lan)and it works perfectly. But this morning, after I clicked "start dns server now", everything freezed, and caps lock light on keyboard kept flashing. I rebooted laptop,it couldn't boot into run level-5 and there were few "skipped" items and "failed" items displayed.... Sorry I'm new to linux so I re-installed it this afternoon, and kept /home partition, formatted / partition.
Everything seems to be fine after re-installation, again I tried configuring a DNS server and clicked "start dns server now", but the same problem appeared, caps lock light kept flashing and I rebooted the laptop but fortunately this time it didn't fail on any items when booting
In Yast-Network Settings, I choose "use controlled with network manager", and I can connect to wireless router and browsing web, but there are no any interfaces shown in Yast-Firewall, and this time, after I clicked "start dns server now", nothing happens, dns server just won't start...
I am using TATA Photon usb internet stick. It's a Huawei USB modem. OpenSuSe detects and shows it as mobile broadband. But can not connect to internet. Any1 has configured similar device before? It shows me in "network manager" but no option to active/connect it. In Windows I got auto dialer for Photon. And customer care says no support for Linux.
View 2 Replies View RelatedI need to have Opensuse 11.2 use my proxy server here in the office and it is by hostname/ip:8080 only not HTTP. The problem is using Yast2 I don't have the option of using the proxy that way it wants http. I've been using opensuse on and off since 9 (great flavor BTW my favorite) Easy as you need it to be and just as complicated as you want it to be, a perfect mix.
View 8 Replies View RelatedI have Fedora running on the comp which is sitting behind proxy, which required username and password to access internet. The username is E-mail address.
I've tried the following to configure internet access:
My question is how can I configure internet access through proxy system wide for all applications and commands?
I live in Taiwan and sometimes need to travel to Mainland China. How can I use a proxy to allow me access to location sensitive content. Ex: Facebook in China, or Pandora outside of the US?
View 2 Replies View RelatedI want to configure proxy caching on my openSUSE boxYast >>> Proxy >>>
View 5 Replies View RelatedI have installed openSuSE 11.2 and my fingerprint reader have been detected on Hardware Information. But when I try to enable it on "Fingerprint Reader", it throws an error: Cannot write PAM settings as you can see on the following pic:
Is there a way to solve this problem?
When using yast to configure/modify partitions I get the following error:
"The partitioning on disk /dev/sdb is not readable by the partitioning tool parted, which is used to change the partition table. "
"You can use the partitions on disk /dev/sdb as they are. You can format them and assign mount points to them, but you cannot add, edit, resize, or remove partitions from that disk with this tool."
I have never seen this before....I want to delete the paritions on this disk and start over...
In my YaST Network Settings (11.3), I see an entry labelled "Unknown Network Device" how to remove the confusion? The Overview tab also correctly lists my three known network devices (listed below), as does the Hardware Information utility. This is the output of lspci, and as far as I can tell, is accurate and complete. So what has YaST seen that it can't identify?
Code:
00:00.0 Host bridge: Intel Corporation 82845 845 [Brookdale] Chipset Host Bridge (rev 11)
00:01.0 PCI bridge: Intel Corporation 82845 845 [Brookdale] Chipset AGP Bridge (rev 11)
00:1d.0 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 01)
00:1d.1 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI [Code].....
I'm trying to setup a wireless AP with my old asus eeepc, so it can act as a repeater to connect my android device on the other end of the apartment. I've already created the Wireless Access Point using hostapd. It took very little configuring, just changed from mode 'a' to 'g' and changed the channel from 60 to 1 and It was all set. Next I setup a dhcp server. Also simple enough using yast.
Up to this point, I was able to connect my android device to the newly created wireless network. However It doesn't have internet access. I guess I have to configure iptables for this, but I find it incredibly confusing! Here are a few specs to help with any examples: The laptop is connected to the internet through eth0 with IP 192.168.2.120 Hostapd is using wlan0, and I'm pretty sure it created mon.wlan0 So, to sum up, when I connect my android device to the network I can, for instance, see what ever pages apache is currently serving on the laptop, but can't access the internet.
I've just spent the entire night trying to get my computer to share Internet with my laptop. I have DSL Internet with the modem configured to bridge mode. On the openSUSE server I have two NIC's. When setting up the DSL (pppoe) it created a dsl0 which is using the NIC eth0. So now I have dsl0, eth0, and eth1 I configured eth1 for DHCP server. When I connect with my laptop using DHCP it gets an IP address just fine. However I can't access the Internet. I think my problem is in the Kernel IP Routing Table. Here is the output from /sbin/route -n
[Code]...
dsl0 obtains IP from ISP eth0 is set to DHCP although that confuses me because how can the same NIC have two IP Addresses? eth1 static IP 10.30.60.1
i did install opensuse and everything ok; i did configure it to be the server and gateway for a little office network Everything seems to be ok most of the time but sometimes (usually between 5 and 7 pm each day) internet stops working and there is no way to let it start again. So i turn off the suse, switch all cables to the old fedora server, just turn it on fedora and internet works. Turn off fedora, connect suse, let it start and everythng ok...it happens all the times
View 9 Replies View Relatedis SAMBA server a ftp server, if not what is the name of ftp server in linux? I want to configure and use a ftp server
View 2 Replies View RelatedIm new in linux i want to configure my redhat machine as both router and transparent proxy!
View 1 Replies View RelatedWhen I start Yast it hangs at "downloading opensuse(...)repdata.xml". the only way to bring up the main window is to skip autorefresh
It seems like it cannot connect to any reporitories at all. When you try to install software from within Yast it is, once again, unable to download anything.