OpenSUSE Network :: Apache Configuration - How To Get Modules Installed
Apr 28, 2010
I haven't been able to get a working X11 environment on a Dell PowerEdge 1850. Using YaST without an X11 environment sucks particularly when you are trying to configure Apache. In addition, the Apache configuration files seem to have changed significantly since the last time I configured Apache on a SuSE Linux distribution. Where can I find good documentation on editing suseconfig files to ensure that I get the modules installed that I need for the collaboration tool that I'm installing?
i am trying to set up LAMP on an old pc i have installed linux, apache, mySQL and PHP following this guide Installing Apache2 With PHP5 And MySQL Support On OpenSUSE 11.3 (LAMP) | HowtoForge - Linux Howtos and Tutorials. i have installed phpMyAdmin but when i try and acess it i get this error
Error MySQL said: Cannot connect: invalid settings.
phpMyAdmin tried to connect to the MySQL server, and the server rejected the connection. You should check the host, username and password in your configuration and make sure that they correspond to the information given by the administrator of the MySQL server.
I am getting a error bellow error msg when running gns3, can some explain what needs to be done. Cant import Qt modules, PyQt is probably not installed?
I want to run snort through a web application with exec("snort -v -i eth0 ") php function.for example when start button was pressed snort should be run,but the execution failed with this error:but when I run snort command via command line as root it will execute successfully.I think this problem is for that apache user haven't access to network adapter, is my guess correct? I have no experience with apache, should I change apache configuration? what is the configuration for this problem.I think I should find a way to allow apache to access but I don't know how?
I have installed apache php and mysql on my pc during debian installation... some of my friends complain they cannot access my webserver from their home and it's available only within my local network... Please help regarding this...
I am relatively new to linux and am running into a problem. I just got a new laptop and need to configure/install it's wireless driver but am getting an error when running "make". The error is: make[1]: Entering directory `/lib/modules/2.6.37.1-1.2-desktop/build' make[1]: *** No rule to make target `modules'. Stop.
I have scoured these forums and know that others have the same issue (when configuring other drivers/programs). I am sorry if this post is redundant. It sounds like the Makefile is pointing to the wrong directory. I am using opensuse 11.4, have make and gcc installed. My kernel is linux-2.6.37.1-1.2 (I just re-installed the desktop kernel to make sure it was up to date). The driver I am trying to install is located here: AUR (en) - rtl8192ce.
Another forum suggests pointing somewhere in the /usr/src/linux-2.6.37.1-1.2 directory instead. Is this correct? Should I be pointing to a folder within this? I am not a programmer but any description about what I am actually putting in this directory and why would be awesome (so I can learn a bit more). Or just helping me solve the problem would be great too.
To make my problem simple to understand I've attached a picture. Basically, in the Webmin>Apache configuration page, where I used to also enable/disable the modules Apache was using (on Ubuntu 8.04) I've noticed now that the option to configure the modules is no more (on Centos 5). So, I'd like to disable and enable some modules but can't, like the mod_python for example which gives me hundreds of errors in the Apache's logs, but cannot.
how to view the Apache modules again in Webmin?
just noticed can't attach images... here's the link to the picture: [URL]
I installed apache from a source *.tar.gz with default configuration. Can I enable other modules (like mod_ssl, mod_dav_svn,...) while apache is running?
I'm trying to configure Apache, however I have some problems.. linux-top:~/appli/httpd-2.2.14 # ./configure --prefix=/root/appli/ checking for chosen layout... Apache checking for working mkdir -p... yes checking build system type... i686-pc-linux-gnu checking host system type... i686-pc-linux-gnu checking target system type... i686-pc-linux-gnu Configuring Apache Portable Runtime library ...
checking for APR... reconfig configuring package in srclib/apr now checking build system type... i686-pc-linux-gnu checking host system type... i686-pc-linux-gnu checking target system type... i686-pc-linux-gnu Configuring APR library Platform: i686-pc-linux-gnu checking for working mkdir -p... yes APR Version: 1.3.9 checking for chosen layout... apr checking for gcc... no checking for cc... no checking for cl.exe... no configure: error: in `/root/appli/httpd-2.2.14/srclib/apr': configure: error: no acceptable C compiler found in $PATH See `config.log' for more details. configure failed for srclib/apr
My first message on this forum, I'm a new comer in the Suse world (after 10 years of debian, ouch) I really like this distro so far. Fast, clean, simple. I got an "acess denied" issue with the apache configuration though. I've installed apache through yast and configured it with yast-http. Permissions are okay and a index.htm file is in the directory.
I won't ask for a direct answer cause everything can be found on the wiki. However, I'm surprised that configuration files are not erased when the related software is uninstalled. I've spent the afternoon trying to make it work so I guess the config files are spoiled right now. I tried to erase all the config file but can't find the yast-http ones, so it does not launch the wizard like the first time. yast-http also warns about my network ruled by NetworkManager, and that it could not run properly with it, how come?
this might not be a Centos related issue, but since I'm using Centos I guess it doesn't hurt to ask; I've used Ubuntu before and haven't encountered this. So, I've just installed Centos and Webmin and now I'm trying to configure the server. Problem is that on the Apache configuration page I don't have the option (should be there) to configure the Apache modules. I've attached a file to show where the modules option should (as before) appeared.
I've a server with opensuse 11.4 (from a 11.3 upgrade), but I can't run Apache.. I've tried latest version (official repository and Apache repository), but it give me always same error:
[error] (38)Function not implemented: apr_socket_accept: (client socket)
I've have removed and reinstalled apr/apr-utils also, but nothing..
1) How to check all installed modules in Ubuntu? 2) How to check whether I installed a specific module or not? For example, uhci_hcd ? 3) How to install a specific module?
I m facing a problem in installing GNS3 Cisco simulator on Fedora 14. I persistently followed the instructions on the [URl]... website and the readme that came in with the GNS3 source package. The main packages needed before running GNS3 are:
Ive compiled and installed all the above packages...it took almost a lifetime, especially for Qt and PyQt. Then, I compiled and installed the GNS3 package and that went well too. But when I run the gns3 executable, I m getting the error message given below:
[root@mnpc GNS3-0.7.2-src]# gns3
Can't import Qt modules, PyQt is probably not installed. I did a double install on PyQt, but the problem still persists.
I have a doubt, suppose i have a module having different versions.I have installed one of these module, now i want to check module info of installed module, Is there any way to check it
i am using intel hardware on this working on suse linux 10.2 . i am not able to configure the network card IP address I have tryed using dhcp and static both way. Currently intel DG41RQ network card is assembled in my system. by using command ifconfig i can see only lo but eth0 is not displayed their.
I've just installed OpenSuse 11.3 on my new laptop but I've skiped the network configuration during the installation of system, but after that when I use the command : dhclient eth0 I'll be connected without any problem except when I reboot the system, I should retype the command to connect
I have installed openSuse and set up a as web server have apache2 running but need to change the MPM to worker. How is this done, I am new to OpeneSuse and Unix/Linux I know where to change the worker settings I just need to enable it over the prefork default. I know how they work I just need how to change to worker.
I desperately need to get my apache server on OPenSuse to use the worker MPM I have tried simply placing worker in the quotes of the apache file /etc/sysconfig/apache2 but when I stop and start apache in the task monitor it is still showing the httpd2 processes to be prefork. Also there seems to be a problem on restart saying it cant find MPM.
There seems to be many different ways of controlling bandwidth usage of downloads of content from Apache2. Does anyone know which is the standard module deployed/deployable in OpenSuse?
Apache is set to start on runlevel 2, 3 and 5, just like MySQL. For some obscure reason this always fails. I tried resetting the runlevels, but this did not help and I always have to start apache manually after reboot.
How can I analyze this problem? In the Apache logs I don't find the cause. Is there an other log I can check?
I am running 11.3 64bit. I need to set up a simple web server, and I was trying to follow this tutorial to do it HowTo: Configure a Linux Apache Web Server on Suse/openSUSE for SSI, Includes, CGI, Common Gateway Interface, AddHandler, ExecCGI, AllowOverride, htaccess, DocumentRoot The web server is running but this part could not be applied and I need to change the ownership. it seems the command lampserver does not exist.
Im trying to setup pwm config on this computer so that the fans wont come on to loud. Motherboard is DFI lanparty JR p45-t2rs. there is pwm hardware, as i have used pwm config in arch on the same computer. any pointers you can give me to get pwm control working on this pc? edit: during sensors detect. im told that the it87 module is needed. but i cannot load it:
I want to enable Pretty URLs in Concrete5 and Joomla CMSs. So far I have- enabled pretty urls in the CMS- created .htaccess files (as they showed)- changed AllowOverride None to All in /etc/Apache2/httpd.conf <directory>- restarted ApacheBut the pretty urls still don't work, When I click any link on either site it gives me a page not found error. If I use the "non-pretty" URLs, all the links work. So I guess Apache either doesn't read the httpd config file or it doesn't read the .htaccess files or something else. Has anyone got this working? What else did you do?
