I am trying to connect my huawei e160 usb modem but it keeps failing and does not show on the Network Manager, checking on /var/log/messages this it what I get:
Oct 5 15:31:30 LPKENBITD002 modem-manager: (ttyUSB1): re-checking support...
Oct 5 15:31:30 LPKENBITD002 modem-manager: (Huawei): (ttyUSB1) deferring support check
Oct 5 15:31:33 LPKENBITD002 modem-manager: (ttyUSB1): re-checking support...
Oct 5 15:31:33 LPKENBITD002 modem-manager: (Huawei): (ttyUSB1) deferring support check
Oct 5 15:31:36 LPKENBITD002 modem-manager: (ttyUSB1): re-checking support...
Oct 5 15:31:36 LPKENBITD002 modem-manager: (Huawei): (ttyUSB1) deferring support check
I tried to connect to the huawei cdma EC325 modem. using the network manager applet. System asked which tpe of connection i selected cdma and gave the username and password for the account and the password for my opensuse account.Still i cannot connect to the internet using huawei ec325 modem.How to rectify the problem What shall i do next.
I can not get NetworkManager to handle my Huawei E220 usb modem. I have searched forums and tried a lot of things. I have just upgraded from openSUSE 11.2 to openSUSE 11.3 using zypper. It seems to work fine except that umtsmon stopped to work, so for now my laptop has no connetion to internet at all. Here are some information about my settings:
I have used usb_modeswitch to make the device a modem. Am I right if I say that usb_modeswitch is a one time command, or does it swap the setting each time it is called? Anyhow lsusb states that the device is a modem. (All the time.) code...
My machine is running on a dual-boot Windows Vista/openSUSE 11.2 scenario. I have been trying to get my Huawei E1550 to work on Linux for the past few days trying numerous methods suggested in other forums from people with the same problem, but I have not produced any fruitful results.
Plugging in the USB modem results in Linux detecting it as a CD-ROM. I have installed usb_modeswitch in attempt to switch it to a modem, but Linux still fails to recognize it. Windows Device Manager and lsusb both give ProductID=1001 and VendorID=12d1 connected to USB1. I'm guessing since Windows detects the correct IDs, the Linux versions should also be correct. In any case, I ran usb_modeswitch with the Default IDs for /etc/usb_modeswitch.conf, which gave 0x1446 as the ProductID, not 0x1001. Upon running usb_modeswitch, the product ID could not be found so the program fails and quits asking if it's connected (and it is).
Just to test, I also ran wvdial which unsurprisingly did not detect the modem and could not send the init strings. All commands were done using root privileges. Also note that when after usb_modeswitch is run and upon plugging in the USB, NetworkManager pops up near the tray saying "attached" but still shows the device as a CD-ROM.
I am new to Linux and opensuse is lovely to me . However i have a problem, I dual boot windows and OpenSuse 10.3(because it plays mp3 out of the box) I actually tried newer versions but the problem is that I cant install this Huawei E1752 usb modem. I have failed people. Please help me. I need to use it for internet.
i'm running Kubuntu karmic and i've been using a 3G Huawei E1552 modem to connect to the internet, everything was going well when suddenly my modem stopped working. I've tried reconfiguring everything, i even reinstalled kubuntu from scratch with no success.Here's a part of my /var/log/debug
HTML Code: Feb 8 17:14:01 alberto-laptop kernel: [ 1532.099883] usb-storage: device found at 7 Feb 8 17:14:01 alberto-laptop kernel: [ 1532.099888] usb-storage: waiting for device to
I have a weird problem on my laptop. Everything works okey on PC though.
I'm using kNetworkManager on my OpenSuse 11.2 on PC.
Everything works fine there with the following settings: 1. Make a new GSM Connection in kNetworkManager and enter settings there 2. Edit etc/sysconfig/network/config file and set .....DNS_Policy from "auto" to "" 3. Enter openDNS to /etc/resolv.conf (nameserver xxx.xxx.xxx.xxx)
It works like that on my PC.
I did the same on my laptop. The modem connects fine, but the DNS'es ain't resolved. So skype etc will work, but no pages will open in Firefox for example.
What else should I need to do to make this work?
It's weird it works the SAME way on my PC, but doesn't on my laptop.
I am having desperate problems trying to connect to the net with a Huawei E173 USB modem. I was using Linux Mint 7 which I upgraded to version 9 today to see if that would fix the problem but it made no difference. Basically it seems the only time I can connect to the net in linux is if I use the modem in windows and then restart straight into linux, in that case it sometimes gets recognised and works. So at least I know it can work.
I've been trying loads of stuff like usb_modeswitch I found on the net but none of it has worked. Here is what ls-usb gives me -
[Code]....
I am unable to get any work done without the net and I will not have access to a wired connection til the new year.
i tried to connect whit this key on opensuse 11.3 but i can't the device is recognized i start to connect it and the system show me "activating" but the light never comes blue , it's always green and it's impossible go to internet i use kde..
I am unable to connect to internet using my cell phone(sony ericsson X1i xperia). When i connect from wired internet it connects without a problem. What settings should i change/ programmes to execute? Thank u in unticipation
trying to make my 3G modem (a ZTE MF622) work with OpenSUSE 11.2. KNetworkManager is recognizing it (so I suppose it's not on Storage Mode), I can create the 3G connection and connect, but I can't navigate on any sites (ping gives "unknown host" for any IP). Also, the KNetworkManager applet doesn't show anything on fields "Name servers" and "Domains" (they are blank). Tried some instructions from the internet here and there, but didn't have any luck.
I'm using OpenSuse 10.3. I have a stick modem of Zain (Sudan), I use it for the internet. I need help on how to configure OpensUSE 10.3 so I can use it for the internet.
i've just installed opensuse 11.2 everything is working fine but i'm unable to connect to the internet through my adsl modem the network is shown to be active but after i configure the dsl connection i can't see any option from where to connect
I am running OpenSUSE 11.4 on an HP 625 laptop and uses a Huawei EC1260 USB modem to connect to the internet. The configuration on NetworkManager worked prefect and the there is no problem connecting. The problem is when I disconnect the modem manually, I am unable to reconnect it via NetworkManager. I have to physically unplug the modem and insert it again, then only I can connect to the internet again
I have a lenovo desktop pc (WIN7) that I connect to the interrnet with. I have a custom built box (SuSE11.3). I have clear internet service and use a USB modem to connect to the internet. Clear does not make a Linux driver yet... I can connect to the Internet through VMware desktop with SuSE as the guest OS. However, I want to connect my other system to a router and my other PC. Would I be able to access the web with the linux box? I have a free NIC card on both pc's, I'm just not savvy enough to network them so if anyone could explain or tell me if it is even posssible to network the 2, My goal is to run SuSE on one, WIN7 on the other and access the internet from both.
My router/adsl modem is not connected to a power supply so when power goes and comes the network will do a re-boot. Now the problem is my OpenSUSE network won't come back on! I set the static ip as Autoeth0 to eth0 however when network updates I losse eth0. Why is this happening? Why doesn't the PC simply re-connect? Can I do it via command line?
I am trying yo install the Samba package but not able to as it is failing to connect to RHN network. Do I have to register to RHN in order to get the SAMBA ?
I am trying to use the HUAWEI E1756C USB stick to connect to the internet. Installing usb_modeswitch and usb_modeswitch-data allowed networkmanager to "recognize" the stick and set up a mobile broadband connection.
The result is that NM succeeded in connecting (one of every five attempts) but firefox does not surf, nor emails can be downloaded etc. Just like if not being connected. The USB modem shows the steady blue LED as connected.
A NM issue? I have tried disabling NM control and tried with PPP clients like NMTSMON, wvdial and even Sakis3g. All with the same results. They seem to connect and show flux up and downloaded but no surfing.
resolf.conf shows is pretty much empty and no DNS there.
The working settings in Window$ are:
Same settings with Sakis3G, or NMTSMON or NM result in connection with no action from applications that use the internet.
I have had a similar issue with WLAN each time I change to a different network. I solve that by forcing to update the DHCP. I mean using -su dhcpd wlan0
But attempts like dhcpcd ttyUSB0 or dhcpcd ttyS0 get the same result. So no idea if this is an DHCP, or DNS or another issue.
My box is an ASUS EEEPC 2005H netbook with OpenSuSE 11.2 and KDE
I've just installed openSUSE 11.2 (KDE 4.3) on my Dell 1720 lapcrusher (a fresh install - had no space to install next to my old openSUSE 11.0, so had to wipe that). I have a huawei e169 (e620) that worked fine in 11.0 (after some initial trouble/configuring, details of which I cannot remember) using knetworkmanager, but try what I might in 11.2 I cannot get this HSDPA modem to connect to my ISP (Virgin Mobile Broadband in Brisbane Australia).
I'm looking for some advice on where to start - first up the modem is detected fine in KDE 4.3, I can setup a profile with the correct APN "VirginBroadband" and "blank" inserted for username/password, and PAP enabled and CHAP disabled - thats pretty much how it was setup under openSUSE 11.0, and it will try to connect but always will not authenticate - I'm not sure at which stage of authentication the process goes pear shaped. I've tried different combos of turning on/off compression/echo options etc, turning on/off MSCHAP/MSCHAP2, but to no avail.
Although my Huawei e200 usb stick is working well under ubuntu, its not working in openSUSE. I think the udev rule provided by the vendor is suited for a debian system and not for openSUSE. When i see the dmesg output, it adds driver for ttyUSB0 and as soon as it adds it also removes it. This sequence goes on continuing till i unplug my usb stick from my computer. The udev file(78-haier.rules) provided by the vendor is as follows:
The haier.sh script that the udev runs is as follows:
[Code]...
# may not use this driver if the product id is already compiled into another driver modprobe -a option echo "0x${VID} 0x${PID}" > /sys/bus/usb-serial/drivers/option1/new_id
I have a 3G modem Huawei e173s-6, the usb id is 12d1:1c0b. It's only detected as storage, not as modem. According to some tutorials I've found, I had to use usb_modeswitch and udev rules to make it automatically switch to modem mode, and usb id 12d1:1c05. I followed the tutorials, and the usb changes the id, but after the switch it is still recognized only as storage.
I have the suspicion that I have to add the driver to the kernel, since this is 11.3, but I haven't the slightest clue what to do. Does someone have experience making this modem work in 11.3? tutorial: USB_ModeSwitch ~ View topic - Huawei E173s working config
I moved from Debian to Ubuntu a few months ago, with everything working fine, except my 3G modem (which worked with wvdial and umtsmon in Debian).
The packaging claims that it is a Huawei E160, but lsusb says different: E220 (12d1:1003).
I've followed various instructions from these forums and the wiki, and it seems to be being recognised as a modem (I can set up an O2 prepaid (UK) connection), but it refuses to connect.
I am trying to connect my Asus EEEPC to an option icon 431 usb modem.
I have successfully installed the HSO driver however am unable to connect through network manager. I have successfully connected through Rhel Beta 2, Fedora 13 and Ubuntu 9+, however, desperrately want to be able to use centos 5..5
I would like to get my Huawei E169 (aka. Vodafone Mobile Connect K3520, E620 etc.) USB UMTS/3G modem running with my openSUSE 11.1 x86 installation on my MSI Wind U100. The GPRS/UMTS connection works perfectly fine with the stand-alone application Vodafone Mobile Connect for Linux. However, there's the drawback that this app overwrites /etc/resolv.conf (leads to DNS issues if I would like to connect via NetworkManager again) and doesn't disable the off-line mode for Firefox automatically. Consequently, I would like to use NetworkManager for the GPRS/UMTS connection, too.
The NetworkManager configuration dialogue (I'm using the GNOME applet) seems to recognize the plugged USB stick without any issues (I get a radio button for "Huawei E620 USB Modem" in the respective add connection wizard). So I've created the configuration for my provider and saved it. After that I've tried to connect via the applet. However, approx. 2 seconds after I selected the connection, the applet says "Network disconnected" (German: Netzwerkverbindung getrennt) and the stick also obviously doesn't get connected (visible via LED). I created several new connections with different names, replugged the stick, rebooted with and without the stick plugged, but without any success. I also installed the special RPM package which is recommended in Huawei UMTS USB Stick - openSUSE, but - of course - the corresponding 11.1 package. I also used the application manually and got the following result: Looking up for HUAWEI modem and switching modem to BBO 06
[Code]....
Can this time out of the serial command be the reason for the unsuccessful connection? And if yes, how can I force the system to wait longer here? Moreover, I'm wondering, that the GNOME NetworkManager applet doesn't allow me to enter the DNS entries for my GPRS/UMTS connection. Where can I add these entries manually or is that not needed?
I upgraded from 11.2 to 11.3 and with great disappointment I discovered that my HSPA modem, that worked out of the box under 11.2, work no more. At the first attempt NetworkManager is able to build the connection, I am able to use Yast to download new packages and online updating but at the first use of firefox the internet connection hangs up. Any attempt to disconnecting/reconnceting the usb stick gives the following error in the kernel echo:
I want to configure the Huawei E220 modem I recently bought in Fedora 10. I read lot of detail documents in the internet. All were interesting and explaining the wvdial.conf file. The problem I have is that, the file asks for the phone # to dial, username & a password. I don't have these information since my ISP didn't provide those. It works perfectly in Windows, in which above information are not needed, because when plugged in Windows, a software installation launches, which does the job to connect to the internet. So, is there a way to configure the modem to connect to the internet without those information. Because my ISP refuses to provide those, when I called there customer services.
