OpenSUSE Network :: Can't Connect Using 3g Modem

Nov 29, 2009

trying to make my 3G modem (a ZTE MF622) work with OpenSUSE 11.2. KNetworkManager is recognizing it (so I suppose it's not on Storage Mode), I can create the 3G connection and connect, but I can't navigate on any sites (ping gives "unknown host" for any IP). Also, the KNetworkManager applet doesn't show anything on fields "Name servers" and "Domains" (they are blank). Tried some instructions from the internet here and there, but didn't have any luck.

View 9 Replies


ADVERTISEMENT

OpenSUSE Network :: Zain Connect Stick Modem

Jul 27, 2010

I'm using OpenSuse 10.3. I have a stick modem of Zain (Sudan), I use it for the internet. I need help on how to configure OpensUSE 10.3 so I can use it for the internet.

View 7 Replies View Related

OpenSUSE Network :: 11.3 - Cannot Connect Huawei Modem (Keeps Failing)

Oct 5, 2010

I am trying to connect my huawei e160 usb modem but it keeps failing and does not show on the Network Manager, checking on /var/log/messages this it what I get:

Oct 5 15:31:30 LPKENBITD002 modem-manager: (ttyUSB1): re-checking support...
Oct 5 15:31:30 LPKENBITD002 modem-manager: (Huawei): (ttyUSB1) deferring support check
Oct 5 15:31:33 LPKENBITD002 modem-manager: (ttyUSB1): re-checking support...
Oct 5 15:31:33 LPKENBITD002 modem-manager: (Huawei): (ttyUSB1) deferring support check
Oct 5 15:31:36 LPKENBITD002 modem-manager: (ttyUSB1): re-checking support...
Oct 5 15:31:36 LPKENBITD002 modem-manager: (Huawei): (ttyUSB1) deferring support check

View 9 Replies View Related

OpenSUSE Network :: Can't Connect To Internet Huawei EC 325USB Modem / Fix It?

Jun 4, 2010

I tried to connect to the huawei cdma EC325 modem. using the network manager applet. System asked which tpe of connection i selected cdma and gave the username and password for the account and the password for my opensuse account.Still i cannot connect to the internet using huawei ec325 modem.How to rectify the problem What shall i do next.

View 2 Replies View Related

OpenSUSE Network :: Unable To Connect To The Internet Through Adsl Modem?

Jun 11, 2010

i've just installed opensuse 11.2 everything is working fine but i'm unable to connect to the internet through my adsl modem the network is shown to be active but after i configure the dsl connection i can't see any option from where to connect

View 1 Replies View Related

OpenSUSE Network :: Can Not Get USB Modem Huawei E220 To Connect To Internet / Sort It?

Aug 5, 2010

I can not get NetworkManager to handle my Huawei E220 usb modem. I have searched forums and tried a lot of things. I have just upgraded from openSUSE 11.2 to openSUSE 11.3 using zypper. It seems to work fine except that umtsmon stopped to work, so for now my laptop has no connetion to internet at all. Here are some information about my settings:

I have used usb_modeswitch to make the device a modem. Am I right if I say that usb_modeswitch is a one time command, or does it swap the setting each time it is called? Anyhow lsusb states that the device is a modem. (All the time.) code...

View 7 Replies View Related

OpenSUSE Network :: 11.3 - Windows7 - Clear Internet Service And Use A USB Modem To Connect

Jan 9, 2011

I have a lenovo desktop pc (WIN7) that I connect to the interrnet with. I have a custom built box (SuSE11.3). I have clear internet service and use a USB modem to connect to the internet. Clear does not make a Linux driver yet... I can connect to the Internet through VMware desktop with SuSE as the guest OS. However, I want to connect my other system to a router and my other PC. Would I be able to access the web with the linux box? I have a free NIC card on both pc's, I'm just not savvy enough to network them so if anyone could explain or tell me if it is even posssible to network the 2, My goal is to run SuSE on one, WIN7 on the other and access the internet from both.

View 3 Replies View Related

OpenSUSE Network :: Router/adsl Modem Is Not Connected To A Power Supply - How To Connect It

Feb 5, 2011

My router/adsl modem is not connected to a power supply so when power goes and comes the network will do a re-boot. Now the problem is my OpenSUSE network won't come back on! I set the static ip as Autoeth0 to eth0 however when network updates I losse eth0. Why is this happening? Why doesn't the PC simply re-connect? Can I do it via command line?

View 5 Replies View Related

CentOS 5 Networking :: Connect Network Manager Usb Modem?

Jul 30, 2010

I am trying to connect my Asus EEEPC to an option icon 431 usb modem.

I have successfully installed the HSO driver however am unable to connect through network manager. I have successfully connected through Rhel Beta 2, Fedora 13 and Ubuntu 9+, however, desperrately want to be able to use centos 5..5

Here's some info up front code...

View 17 Replies View Related

Ubuntu Networking :: Network Manager Doesn't Seem To Be Able To Use Modem To Connect To Internet

Feb 9, 2010

I have installed WvDial (apparently) but it has no icon or launcher to start it by default, how do i get it to run? I also need basic set up how to. I am running Ubuntu 9.10 (Karmic) and network manager doesn't seem to be able to use my modem to connect to the internet (set up wizard works, appears connected, but then I get page not found error). Hence I wish to use WvDial to try to connect instead.

View 9 Replies View Related

Fedora Networking :: Updates Ruined System - Unable To Use Network Manager To Connect To The Net Through My USB Modem

Mar 12, 2009

I've FC10 installed. After updating a few days back, I'm unable to use Network Manager to connect to the net through my USB Modem. All the threads I've read say to do

Code: yum update NetworkManager but how can I do it without net connection? Can anyone post the exact link of the Network Manager's latest and BUG-FREE rpm so that I can directly run it?

View 10 Replies View Related

OpenSUSE Wireless :: Unable To Get Modem To Connect

Oct 9, 2010

I am trying to connect to wireless broadband using SuSE 11.2 and a Huawei E160E USB modem, through Internode Australia.

Networkmanager does not seem to recognise the modem so I am trying other means. I believe I have got wvdial to connect (it reports a correct IP address, the light on the stick goes solid blue and I can ping external IP addresses). However it can't find a DNS nameserver and I can't work out how to provide one to wvdial, and therefore can't do anything through the connection (I would rather not revert to ifup because this laptop travels between WLANs). I followed swerdna's comprehensive instructions on setting up a wireless broadband modem in YAST, but I got lost on the very last instruction: KMenu --> KInternet. I can't find this on my application launcher.

View 7 Replies View Related

Ubuntu Networking :: Huawei E1552 Modem To Connect To The Internet, Everything Was Going Well When Suddenly Modem Stopped Working?

Feb 8, 2010

i'm running Kubuntu karmic and i've been using a 3G Huawei E1552 modem to connect to the internet, everything was going well when suddenly my modem stopped working. I've tried reconfiguring everything, i even reinstalled kubuntu from scratch with no success.Here's a part of my /var/log/debug

HTML Code:
Feb 8 17:14:01 alberto-laptop kernel: [ 1532.099883] usb-storage: device found at 7
Feb 8 17:14:01 alberto-laptop kernel: [ 1532.099888] usb-storage: waiting for device to

[code].....

View 4 Replies View Related

OpenSUSE :: Unable To Connect PPTP (VPN) Over Ppp0 - 3G Modem (MMX 310G)?

Nov 23, 2010

I have installed and setup 3G which works perfectly fine. I use sakis3g scripts for connecting to 3G network. My VPN profile created with network manager (client/NetworkManager GUI) works well.

#cnetworkmanager --activate-connection=user,'XXXXX_vpn_singapore',wlan0,&

Now when I do the same with using using ppp0 (which is after connecting to VPN) I get the following error messages. #cnetworkmanager --activate-connection=user,'XXXXX_vpn_singapore',ppp0,&

[Code]...

View 9 Replies View Related

OpenSUSE Wireless :: Exchanged Modem/router For Same Model But Now Cannot Connect To Internet Using WEP

Dec 1, 2010

I had an ATT "2Wire" modem/router that was working but connection to the Internet was often poor. An ATT technician came to my home and swapped out the modem/router for the identical model. I changed the ESSID and WEP code to match the new unit and everything was fine with the following wireless units: a wireless desktop, two cellphones, three wireless Archos tablets, and a couple of e-reader tablets. So all seemed to be fine wirelessly. However...

My laptop (SuSE 11.0, KDE3) simply won't connect no matter what I do. I changed the ESSID and WEP info in the lappy exactly as was done with the other wireless devices named above. But no good. The lappy does see the modem/router (a good, strong signal appears in KNetworkManager). But it seems as if the modem/router is rejecting the lappy's attempted handshake using the new ESSID and/or WEP information.

I thought that perhaps there was something wrong with the lappy's wireless card, so I took it to a Starbucks to see if it would connect there on an open network, and it did without problem. So the lappy's wireless card appears to be working fine. It just won't talk to the encrypted modem/router at home. Here are the settings on the lappy. Hopefully something here is easily identified as the culprit. With all the clicking I've done it certainly is possible that I ticked something that should not have been ticked and just don't realize what I've done.

Network settings screen:
Global options tab:
Network setup method: user controlled with Network Manager
Change default route via DHCP (ticked)

[code]....

Why won't the new modem/router which is exactly the same as the old one except for the ESSID and WEP work with my lappy yet it does work with a bunch of other wireless devices?

View 9 Replies View Related

OpenSUSE Network :: Configure USB Modem In 11.1?

Sep 18, 2009

I have bought a new USB modem from my service provider. The model they provided is "Huawei EC1260" Huawei Terminal. As usual the official support is for windows and mac.

I tried to install this device using two methods..

1) Set knetworkmanager settings to "traditional with ifup". Then in wireless setup there is a choice of having "usb" (A tick box). I selected that, and setup completed successfully but the knetworkmanager was not up(I did ifdown wlan0 (wlan0 was the wireless config name), ifup wlan0 and the rcnetwork restart.)

2) Again knetworkmanager was set to "traditional method with ifup. This times while adding the connection I specifically selected the type "USB", then clicked to finish the configuration. The configuration finished without any errors but when I checked the Network Configuration screen no USB device was added there.

Are there any specific steps to configure a USB modem

View 9 Replies View Related

OpenSUSE Network :: Sharing A Usb 3g Modem

Feb 14, 2010

i'm running suse 11.2 and using a ZTE mf627. thus far i can connect to the internet using usb_switcher/vwdial but i want to share it across a LAN. all the how-to's on connection sharing I've seen use the network manager/network settings, but the device doesn't show up in either

View 2 Replies View Related

OpenSUSE Network :: 3g Modem Is Not Connecting

Apr 21, 2010

I'm trying a long time to configure my 3g modem to connect.I had tryied using the KDE Network manager and the modem stay in "Waiting authorization" for ever ^^.The KDE Network manager runs ok in Kubuntu.I had tryied download and install kppp, but kppp don't open my modem (/dev/ttyUSB01)Then how can I configure my modem?

View 1 Replies View Related

OpenSUSE Network :: Configuring LAN Modem Not Possible In 11.3?

Jul 26, 2010

I have a devolo MicroLink 56k Fun LAN modem, which I could configure in openSuse 11.2 as an DSL device. With 11.2 it worked fine. But it isn't possible in 11.3 to configure it, because I cannot set the dial up internet provider phone number for this DSL device.I also tried it to configure it as a modem, but then it used the /dev/modem device, which is the wrong device for this LAN modem.

View 3 Replies View Related

OpenSUSE Network :: ICS With USB Modem / Dynamic IP

Apr 18, 2011

I have a box with 1 ethernet card and Huawei E160 USB modem. So, I have configured eth0 interface with IP 192.168.1.1 and modem0 interface with dynamically assigned IP. Now, I'd like to share Internet from modem0 to eth0 and so to the rest of home local network.

I need your advice on how to do it. All the manuals I've read deal with two ethernet cards that have static IPs. It seems that YAST lacks the GUI for it, too. Also, I need the configuration to work even with no user logged in so I'm using ifup instead of NetworkManager.

View 5 Replies View Related

OpenSUSE Network :: USB Modem Not Recognized?

Jun 10, 2011

I am using 11.4 gnome desktop on hp elitebook 8440w. I have a reliance netconnect plus usb modem. (ZTE AC 2726).

Initially it was recognized but didn't work. But now system is not recognizing it. What should i do. Please suggest.

View 9 Replies View Related

Ubuntu Networking :: Cable Modem Networking - Can't Connect To Each Other On The Home Network

Feb 14, 2010

I just got connected to Charter Cable Internet service a few days ago and I'm having a weird problem with my home network. Prior to this my network worked fine. On my network I have a desktop running Ubuntu 9.10/64 and Virtualbox with WinXP installed, an HTPC with Ubuntu 9.10/32 installed and a laptop dual booted with Ubuntu 9.10/32 and WinXP. The desktop and HTPC are hard wired to a wireless router and the laptop is wireless. The cable modem is hard wired to the router. I have samba installed and UFW is disabled. The problem is: with the cable modem turned off or on standby, all machines connect to each other and can transfer files, etc just fine but when I activate the cable modem all of the machines can connect to the Internet but the machines running Ubuntu can't connect to each other on the home network. If I boot the laptop into Windows, it can connect to the Linux machines just fine but if I boot it into Linux, it won't connect to the Linux machines but it can connect to the Internet and as far as the desktop, Ubuntu won't connect to the network but Windows running in the Virtualbox with bridged networking can connect to all of the machines.

View 2 Replies View Related

OpenSUSE Network :: 11.2 - 3G USB Broadband Modem Keeps Disconnecting

Jan 23, 2010

I am running a 3-G wireless USB broadband modem, and connecting with Network Manager, but I keep getting disconnected when idle after 5-6 minutes. I am used to using Kinternet to connect with my 3-G wireless USB broadband modem, and setting it up in Yast / Network / Modems, but was not able to configure my modem there (for some mysterious reason) so ended up using Network Manager instead.

What's going on here regarding YAST being unable to configure my modem (even when Network Manger is disabled). But my main problem at this point is that my connection times out after about 6 minutes if I'm idle. This is a big problem for me because I type slow and frequently get disconnected while posting on message boards. Where are the idle time out settings are for Network Manager? I can't seem to find them.

View 3 Replies View Related

OpenSUSE Network :: HW Modem Connects But Ppp Dies W/e #2?

Mar 14, 2010

I just loaded 11.2 & Kde 4.3. Installed both Kinternet and Kppp. My modem is a USR PCI HW modem 2976. Hardware Info shows it connected to /dev/ttyS4. I configured the modem with Yast as modem0. The user access box is checked for Kinternet Both Kppp and and Kinternet will dial out.

The connect response comes back from the ISP and either of the dialers will hang and the dial tone comes back. The firewall is showing modem0 in the External section. Nothing changes if I shut the firewall off.There's nothing in the dmesg I could find. Could this be a pppd permission problem?

View 5 Replies View Related

OpenSUSE Network :: Huawei E1550 USB Modem In 11.2?

Mar 17, 2010

My machine is running on a dual-boot Windows Vista/openSUSE 11.2 scenario. I have been trying to get my Huawei E1550 to work on Linux for the past few days trying numerous methods suggested in other forums from people with the same problem, but I have not produced any fruitful results.

Plugging in the USB modem results in Linux detecting it as a CD-ROM. I have installed usb_modeswitch in attempt to switch it to a modem, but Linux still fails to recognize it. Windows Device Manager and lsusb both give ProductID=1001 and VendorID=12d1 connected to USB1. I'm guessing since Windows detects the correct IDs, the Linux versions should also be correct. In any case, I ran usb_modeswitch with the Default IDs for /etc/usb_modeswitch.conf, which gave 0x1446 as the ProductID, not 0x1001. Upon running usb_modeswitch, the product ID could not be found so the program fails and quits asking if it's connected (and it is).

Just to test, I also ran wvdial which unsurprisingly did not detect the modem and could not send the init strings. All commands were done using root privileges. Also note that when after usb_modeswitch is run and upon plugging in the USB, NetworkManager pops up near the tray saying "attached" but still shows the device as a CD-ROM.

View 5 Replies View Related

OpenSUSE Network :: Set Up / Recognize Usb Dial-up Modem

Jun 12, 2010

I have an external usb dial up modem. lsusb shows: Bus 001 Device 002: ID 2001:f10d D-Link Corp. [hex] Accent Communications Modem How do I set this up? It probably needs a driver, how do I check it, or better yet, can I get yast to tell me if it recognizes the modem or needs firmware? I know linux and dial up is like the seventh circle of hell. Just wondering if there was a snowball's chances of getting this working. Sorry if this is the wrong section to ask in. Seemed like as good as any when I checked.

View 9 Replies View Related

OpenSUSE Network :: Set Up Dial Up Modem Using Yast

Jun 28, 2010

I have a US Robotics serial modem, and I have smpppd enabled in system services, with wvdial and kppp installed. When I try to set the modem up using yast, I keep getting hung up by the different screens. First a screen that asks if I need to dial a number to get out. I have to dial 9, so I have that entered. Then a screen that asks for "country" and "provider."

When I try to enter anything, nothing shows in the boxes, so I go to a screen that asks for the phone number, provider, user name and password. When I enter those, it goes to a screen that wants "Connection Parameters", with default settings and the "buttons" at the bottom of the screen "muted," or flattened out, i.e. unusable. That makes it impossible for me to set the information as saved, so it's back to the beginning and sart over, with the same results over and over. How do I get the modem so it dials out?

View 9 Replies View Related

OpenSUSE Network :: Hardware Modem Will Not Configure

Oct 18, 2010

I have a Zoom 2920 internal hardware modem that worked well with Suse 10.0. In Suse 11.3 the modem config. overview lists 2 modems for this one board; #1- AT Modem and #2- Venus Modem (v90, 56K Flex). With #1 "edit" brings up modem parameters and the modem device line is blank. With #2 the device line shows /dev/ttys4.

When the provider parameters are entered, for either #1 or #2, the modem overview continues to list them as not configured but a third line "modem 0" is configured with the provider information at /dev/ttys4. The modem will not function.

View 3 Replies View Related

OpenSUSE Network :: New Cable Modem Kills DNS

Nov 13, 2010

I got a new cable modem so I could get rid of the one I've been leasing from the cable company. It is a Motorola sb6120. Everything is fine with the ISP, it's approved for operation on their network, the only hitch was I had to use my Windows laptop to run their activation software.

At any rate, with the new modem installed, I hop on my Linux box and go to work. I'm seeing some terrible delays in looking up names. When I look with firebug, all the dns lookups for new names are taking 15+ seconds. First I just think maybe the names aren't cached or something is weird for a minute and it will get better, but no. After several restarts and then a couple days persevering with the new cable modem, all DNS queries are still terribly slow (including zypper, mail client, web client).

Suddenly I remember an issue I was having with, I believe version 11.1 when I first installed it. For just the computer on my network with a fixed IP address, DNS resolution was slow like this and if I disabled IPv6 then all was well. I believe there was even a patch issued back then for gethostbyname() that was supposed to fix the issue? So, when I disable IPv6, DNS lookup is back to normal. The two Linux computers on my network had been working fine with IPv6 and the old modem, though, and the Windows box is still working fine even with the new modem.

I can disable IPv6 and make it fast again, but really why should I have to?

View 6 Replies View Related

OpenSUSE Network :: Resolver With Os 11.2 And Wireless Or 3g Modem (pppd)?

Feb 20, 2010

If I connect with a 3g modem or with wireless sometimes the resolving does not work. This happens on opensuse 11.2. nslookup and dig works but nor ping nor ssh nor any other network application does work If I modify the /etc/resolv.conf after connecting to a wireless network for example it does not work even the dns are known And more strange if the resolver works and I modify /etc/resolv.conf with known dns the resolver does not work anymore. BTW: the dns entry from the wireless is 192.168.1.1 and I do not have any idea how the wireless ap is configured... so it could be in this case that dns is not forwared only allowed to use 192.168.1.1 but the other case is a 3g modem which not even the propagated dns entries works in the bad case

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved