I tried to connect to the huawei cdma EC325 modem. using the network manager applet. System asked which tpe of connection i selected cdma and gave the username and password for the account and the password for my opensuse account.Still i cannot connect to the internet using huawei ec325 modem.How to rectify the problem What shall i do next.
View 2 RepliesI can not get NetworkManager to handle my Huawei E220 usb modem. I have searched forums and tried a lot of things. I have just upgraded from openSUSE 11.2 to openSUSE 11.3 using zypper. It seems to work fine except that umtsmon stopped to work, so for now my laptop has no connetion to internet at all. Here are some information about my settings:
I have used usb_modeswitch to make the device a modem. Am I right if I say that usb_modeswitch is a one time command, or does it swap the setting each time it is called? Anyhow lsusb states that the device is a modem. (All the time.) code...
I am trying to connect my huawei e160 usb modem but it keeps failing and does not show on the Network Manager, checking on /var/log/messages this it what I get:
Oct 5 15:31:30 LPKENBITD002 modem-manager: (ttyUSB1): re-checking support...
Oct 5 15:31:30 LPKENBITD002 modem-manager: (Huawei): (ttyUSB1) deferring support check
Oct 5 15:31:33 LPKENBITD002 modem-manager: (ttyUSB1): re-checking support...
Oct 5 15:31:33 LPKENBITD002 modem-manager: (Huawei): (ttyUSB1) deferring support check
Oct 5 15:31:36 LPKENBITD002 modem-manager: (ttyUSB1): re-checking support...
Oct 5 15:31:36 LPKENBITD002 modem-manager: (Huawei): (ttyUSB1) deferring support check
i'm running Kubuntu karmic and i've been using a 3G Huawei E1552 modem to connect to the internet, everything was going well when suddenly my modem stopped working. I've tried reconfiguring everything, i even reinstalled kubuntu from scratch with no success.Here's a part of my /var/log/debug
HTML Code:
Feb 8 17:14:01 alberto-laptop kernel: [ 1532.099883] usb-storage: device found at 7
Feb 8 17:14:01 alberto-laptop kernel: [ 1532.099888] usb-storage: waiting for device to
[code].....
i've just installed opensuse 11.2 everything is working fine but i'm unable to connect to the internet through my adsl modem the network is shown to be active but after i configure the dsl connection i can't see any option from where to connect
View 1 Replies View RelatedI have a lenovo desktop pc (WIN7) that I connect to the interrnet with. I have a custom built box (SuSE11.3). I have clear internet service and use a USB modem to connect to the internet. Clear does not make a Linux driver yet... I can connect to the Internet through VMware desktop with SuSE as the guest OS. However, I want to connect my other system to a router and my other PC. Would I be able to access the web with the linux box? I have a free NIC card on both pc's, I'm just not savvy enough to network them so if anyone could explain or tell me if it is even posssible to network the 2, My goal is to run SuSE on one, WIN7 on the other and access the internet from both.
View 3 Replies View RelatedMy machine is running on a dual-boot Windows Vista/openSUSE 11.2 scenario. I have been trying to get my Huawei E1550 to work on Linux for the past few days trying numerous methods suggested in other forums from people with the same problem, but I have not produced any fruitful results.
Plugging in the USB modem results in Linux detecting it as a CD-ROM. I have installed usb_modeswitch in attempt to switch it to a modem, but Linux still fails to recognize it. Windows Device Manager and lsusb both give ProductID=1001 and VendorID=12d1 connected to USB1. I'm guessing since Windows detects the correct IDs, the Linux versions should also be correct. In any case, I ran usb_modeswitch with the Default IDs for /etc/usb_modeswitch.conf, which gave 0x1446 as the ProductID, not 0x1001. Upon running usb_modeswitch, the product ID could not be found so the program fails and quits asking if it's connected (and it is).
Just to test, I also ran wvdial which unsurprisingly did not detect the modem and could not send the init strings. All commands were done using root privileges. Also note that when after usb_modeswitch is run and upon plugging in the USB, NetworkManager pops up near the tray saying "attached" but still shows the device as a CD-ROM.
I am new to Linux and opensuse is lovely to me . However i have a problem, I dual boot windows and OpenSuse 10.3(because it plays mp3 out of the box) I actually tried newer versions but the problem is that I cant install this Huawei E1752 usb modem. I have failed people. Please help me. I need to use it for internet.
View 1 Replies View RelatedI have a weird problem on my laptop. Everything works okey on PC though.
I'm using kNetworkManager on my OpenSuse 11.2 on PC.
Everything works fine there with the following settings:
1. Make a new GSM Connection in kNetworkManager and enter settings there
2. Edit etc/sysconfig/network/config file and set .....DNS_Policy from "auto" to ""
3. Enter openDNS to /etc/resolv.conf (nameserver xxx.xxx.xxx.xxx)
It works like that on my PC.
I did the same on my laptop. The modem connects fine, but the DNS'es ain't resolved. So skype etc will work, but no pages will open in Firefox for example.
What else should I need to do to make this work?
It's weird it works the SAME way on my PC, but doesn't on my laptop.
What include support a driver for USB modem Huawei E219 (HSDPA/UMTS) and Huawei EC226 (3G/EVDO)?
View 1 Replies View RelatedI installed today Slackware64-current on my laptop, but I can't get working internet connection. I have installed wvstreams 4.61 and wvdial 1.61, configured it right, it gets an IP address and connection but I can't get an access to the internet.
[Code]....
I am having desperate problems trying to connect to the net with a Huawei E173 USB modem. I was using Linux Mint 7 which I upgraded to version 9 today to see if that would fix the problem but it made no difference. Basically it seems the only time I can connect to the net in linux is if I use the modem in windows and then restart straight into linux, in that case it sometimes gets recognised and works. So at least I know it can work.
I've been trying loads of stuff like usb_modeswitch I found on the net but none of it has worked. Here is what ls-usb gives me -
[Code]....
I am unable to get any work done without the net and I will not have access to a wired connection til the new year.
i tried to connect whit this key on opensuse 11.3 but i can't the device is recognized i start to connect it and the system show me "activating" but the light never comes blue , it's always green and it's impossible go to internet i use kde..
View 1 Replies View RelatedI have installed WvDial (apparently) but it has no icon or launcher to start it by default, how do i get it to run? I also need basic set up how to. I am running Ubuntu 9.10 (Karmic) and network manager doesn't seem to be able to use my modem to connect to the internet (set up wizard works, appears connected, but then I get page not found error). Hence I wish to use WvDial to try to connect instead.
View 9 Replies View RelatedI have opensuse 11.1 Gnome on Lenovo S10e. I'm wanting to establish a mobile internet connection. I have tried so far...*UMTSMON but when I click on it nothing happens. I have reinstalled the program several times to no avail. *WINE to run the Optus program, however the program doesn't find the HUAWEI USB stick & *Via a Bluetooth connection (use mobile phone as a modem) didn't work either Anyhow, I have tried these and some other ways to get mobile to no avail.
Also, have gone to network connections-mobile broadband-add-configure it- but what am I forgetting to do? Need a path I can take to get mobile internet working. (I even have a direct SIM card slot in this laptop
trying to make my 3G modem (a ZTE MF622) work with OpenSUSE 11.2. KNetworkManager is recognizing it (so I suppose it's not on Storage Mode), I can create the 3G connection and connect, but I can't navigate on any sites (ping gives "unknown host" for any IP). Also, the KNetworkManager applet doesn't show anything on fields "Name servers" and "Domains" (they are blank). Tried some instructions from the internet here and there, but didn't have any luck.
View 9 Replies View RelatedI had an ATT "2Wire" modem/router that was working but connection to the Internet was often poor. An ATT technician came to my home and swapped out the modem/router for the identical model. I changed the ESSID and WEP code to match the new unit and everything was fine with the following wireless units: a wireless desktop, two cellphones, three wireless Archos tablets, and a couple of e-reader tablets. So all seemed to be fine wirelessly. However...
My laptop (SuSE 11.0, KDE3) simply won't connect no matter what I do. I changed the ESSID and WEP info in the lappy exactly as was done with the other wireless devices named above. But no good. The lappy does see the modem/router (a good, strong signal appears in KNetworkManager). But it seems as if the modem/router is rejecting the lappy's attempted handshake using the new ESSID and/or WEP information.
I thought that perhaps there was something wrong with the lappy's wireless card, so I took it to a Starbucks to see if it would connect there on an open network, and it did without problem. So the lappy's wireless card appears to be working fine. It just won't talk to the encrypted modem/router at home. Here are the settings on the lappy. Hopefully something here is easily identified as the culprit. With all the clicking I've done it certainly is possible that I ticked something that should not have been ticked and just don't realize what I've done.
Network settings screen:
Global options tab:
Network setup method: user controlled with Network Manager
Change default route via DHCP (ticked)
[code]....
Why won't the new modem/router which is exactly the same as the old one except for the ESSID and WEP work with my lappy yet it does work with a bunch of other wireless devices?
I'm using OpenSuse 10.3. I have a stick modem of Zain (Sudan), I use it for the internet. I need help on how to configure OpensUSE 10.3 so I can use it for the internet.
View 7 Replies View RelatedI recently installed Open SUSE 11.2. It's a pretty cool OS. Anyway,sadly enough, I cannot access my internet connection via my USB internet modem. Worst of all, Open SUSE cannot detect the USB modem device. I am currently new to Linux and I may be overlooking something. I also clearly figured that Linux online is better than Linux offline from what I read from blogs and numerous posts. So in essence, I cannot fully appreciate the true power of Open SUSE 11.2 offline. Would there be a way to install my USB modem device?
View 1 Replies View RelatedTrying to move from Windows to OpenSUSE. I have installed OpenSUSE 11.2, and am having a hard time trying to connect to the internet using my nokia E65. I have tried to configure the modem thru YaST and it keeps showing that my nokia E65 modem is not configured, but adds another modem every time I configure using the edit button i.e. modem0, modem1 etc.
When i finish the configuration I get pop ups on the bottom right conner:
Notification from network management
WLAN interface attached
Network interface attached
But nothing happens afterwards. When I connect the phone it shows that it is recognized as a modem (probably). but when I click on the icon so it connects to my service provider "econet" it just says activating with a red x in the conner, and still nothing happens!
The following are the screenshots (still not sure how to attach files on this forum), may someone assist, with that too.
I really want to move from Windows but this is what's stopping me. the sooner I connect to the Internet through my phone, the sooner I leave Windows, since it's the only way I can connect to the internet.
I have tried wvdial, and I got the following:
I am running OpenSUSE 11.4 on an HP 625 laptop and uses a Huawei EC1260 USB modem to connect to the internet. The configuration on NetworkManager worked prefect and the there is no problem connecting. The problem is when I disconnect the modem manually, I am unable to reconnect it via NetworkManager. I have to physically unplug the modem and insert it again, then only I can connect to the internet again
View 3 Replies View RelatedAre there detailed instructions for Suse 11.2, anywhere, on installing a hardware dial-up modem and configuring it to get an Internet connection?
View 2 Replies View RelatedMy router/adsl modem is not connected to a power supply so when power goes and comes the network will do a re-boot. Now the problem is my OpenSUSE network won't come back on! I set the static ip as Autoeth0 to eth0 however when network updates I losse eth0. Why is this happening? Why doesn't the PC simply re-connect? Can I do it via command line?
View 5 Replies View Relatedwith installing Modem Huawei E170. my modem can not connected and suddenly remove from my PC. i am using Ubuntu LTS 10.04.
View 1 Replies View RelatedI installed Suse 11.2 on clean HD. I cannot connect to the internet. Seems like Suse didn't install drivers for on board ethernet card. It is a Marvell Yukon 88E8056. I'm new to this and don't know how to install the drivers.
View 3 Replies View RelatedI have an adsl modem acting as a bridge to my router my setup was working well for more than year now , but then the internet went slow . I set the modem back to PPPoE the problem was with the DNS server of the ISP so using ifup i set the dns t 8.8.8.8 (google) the connection is back , but when i set the modem back as a bridge slow internet does the router know that my dns is 8.8.8.8 or i should set the dns on the router ? I can't see an option to set the dns on the router ( i just enter my username and password from the isp to use PPPoE mode ) by the way i called the isp support they kept telling me to restart , i told them i did but i never restarted my pc . I'm sure if i tell them i'm running linux they will blame the os !
View 2 Replies View Relatedhow to connect my network data card to run internet on openSuse..
View 4 Replies View Relatedthe thing is that I cant use Network Manager to connect to Internet, because it simply do not connect. The connection, although, awailable throught yast when i choose "traditional method with ifup", so everything is just fine, but if i need to reconnect, i have to reboot. How do I setup a !working! connection through Network Manager, or maybe i do not do something properly.
View 5 Replies View RelatedI use Ubuntu i can not work internet connection Please help me search for a solution but did not find
Use the USB modem model x060s.
I am trying Open Suse 11.2 KDE Live CD and don't know how to connect to the Internet. What do I do?
View 9 Replies View Related