I am trying to connect my Asus EEEPC to an option icon 431 usb modem.
I have successfully installed the HSO driver however am unable to connect through network manager. I have successfully connected through Rhel Beta 2, Fedora 13 and Ubuntu 9+, however, desperrately want to be able to use centos 5..5
Here's some info up front code...
I have installed WvDial (apparently) but it has no icon or launcher to start it by default, how do i get it to run? I also need basic set up how to. I am running Ubuntu 9.10 (Karmic) and network manager doesn't seem to be able to use my modem to connect to the internet (set up wizard works, appears connected, but then I get page not found error). Hence I wish to use WvDial to try to connect instead.
View 9 Replies View RelatedI've FC10 installed. After updating a few days back, I'm unable to use Network Manager to connect to the net through my USB Modem. All the threads I've read say to do
Code: yum update NetworkManager but how can I do it without net connection? Can anyone post the exact link of the Network Manager's latest and BUG-FREE rpm so that I can directly run it?
I successfully installed openvpn and networkmanager openvpn plugin. Then I successfully added a PPTP vpn connection by networkmanager vpn tab which name is "vpn1". But now I don't know how to connect to this PPTP vpn connection. I tried bellow command but no luck.
openvpn --config vpn1.config
I installed Ubuntu 10.04. I was having many issues getting the modem to work. I have worked most of them out and was able to connect using KPPP. My issue now is that I can not find a version of Network Manager that allows me to configure to use the Modem connection. There is simply no modem tab in Network manager. So my modem is connected to the ISP but I can't configure the connection.
View 1 Replies View RelatedI have some CDMA USB modem, it's work perfectly using wvdial, but why my modem
not detected by network manager. I want using gwibber and empathy IM, and i read that's apps using network manager (ex:if i connect using wvdial, i can't update status using gwibber). How to make network manager recognize my USB modem?PS:
Code:
$lsusb
Bus 003 Device 004: ID 10c4:ea60 Cygnal Integrated Products, Inc. CP210x Composite Device
[code]...
I'm try to create a mobile broadband connection using my Huawei E 1550 medem. but in Network manager there is not way to select my modem in the first step ( device selection step ) the drop down menu is locked. what to do ? how to configure my modem with ubuntu ?
View 1 Replies View RelatedPl can anyone guide me to connect centos 5.5 using ethernet port to ADSL Broadband modem which is configured in PPPoe mode?
View 19 Replies View RelatedI just got connected to Charter Cable Internet service a few days ago and I'm having a weird problem with my home network. Prior to this my network worked fine. On my network I have a desktop running Ubuntu 9.10/64 and Virtualbox with WinXP installed, an HTPC with Ubuntu 9.10/32 installed and a laptop dual booted with Ubuntu 9.10/32 and WinXP. The desktop and HTPC are hard wired to a wireless router and the laptop is wireless. The cable modem is hard wired to the router. I have samba installed and UFW is disabled. The problem is: with the cable modem turned off or on standby, all machines connect to each other and can transfer files, etc just fine but when I activate the cable modem all of the machines can connect to the Internet but the machines running Ubuntu can't connect to each other on the home network. If I boot the laptop into Windows, it can connect to the Linux machines just fine but if I boot it into Linux, it won't connect to the Linux machines but it can connect to the Internet and as far as the desktop, Ubuntu won't connect to the network but Windows running in the Virtualbox with bridged networking can connect to all of the machines.
View 2 Replies View RelatedI have a k3806-z vodafone mobile broadband modem, on ubuntu 10.04. I have added the mobile broadband connection with the network manager wizard. But network manager does not list my connection. I installed usb-modeswitch and usb-modeswitch-data. Still nothing. The disc utility tells me it recognises the modem as a cd drive and a storage device. Evidently usb-modeswitch is not working.
View 11 Replies View RelatedI recently fixed an annoying problem and I thought it would be nice to share my solution here. The problem was that after a cycle of suspend/resume, Network Manager would only auto-connect to the same network as it was previously connected to. So, for example, if I suspended my laptop at home, and then I went to school and resumed it, it would try to connect to the home network, and then just give up. It would not connect to the school network unless I explicitly told it to.irst, I'll describe the fix. If you're having this problem, you can this. Copy the following:
Code:
#!/bin/sh
case "$1" in
[code]....
I have used ubuntu in the past but had a lot of hardware issues with it and unfortunately moved back to windows (( BUT i have tried Ubuntu again and all seems to work great except wifi My wifi connection is sort of working because when i run SUDO IWLIST SCAN it does pull up all available networks. But in the network manager icon on the panel i left click but i see no networks and can't connect to anything. I WOULD LOVE TO keep Ubuntu and use it permanently but I must get wifi working or else this won't be possible.
View 4 Replies View RelatedI recently put Linux on a Thinkpad T40 I got. The wireless card works out of the box--I can see nearby networks. However, I can't connect to mine. network-manager would try (spin spin spin), fail, ask for the password, and then go back to the beginning and repeat indefinitely. This happened to me on a different computer, and on that one all I had to do was use wicd instead of network-manager. So I installed wicd, but it's not working either--it hangs at "Obtaining IP address".
I've found many, many threads with people who had the same problem, but none of their fixed worked for me.
I also tried to get wifi going manually, using this guide, but that didn't work.
I'm running Ubuntu Karmic Server with Xfce desktop, the problem is the network manager, it says it is disconnected, even though I am connected to my network and getting an internet connection. It wouldn't normally bother me, but I'm trying to setup a VPN using the network-manager-openvpn plugin. I put in the required details for the VPN connection, but as soon as I tick the "apply to all users" box, the information is lost. The information will remain if I don't tick that box, but it will not connect. when I try to select the VPN connection I just setup, nothing happens.
I've tried the exact same configuration on another desktop, running Ubuntu Karmic with Gnome desktop, the network manager works fine, my ethernet connection is showing as connected, and I can connect to the VPN no problem, the problem lies with the network manager in Xfce. Is there anyway I can get it to show as connected? it wont allow me to connect to the VPN otherwise, it's silly, because that adapter has a full working network connection.
I'm trying to use wicd instead of network manager because I want a "no fuss" way to use wireless on wmii. However, wicd will not find any networks unless network-manager has been run and has connected to a network since startup. If it hasn't connected to a wireless network, the wicd will find no networks, and iwlist won't provide a list of networks either.
This seems to mean that network-manager is doing something to the interface when it connects that needs to be done to make it usable, but I'm not sure what it is or how exactly to find out. I do know that the interface (eth2) will not appear in ifconfig if network manager hasn't connected, which I assume means that it hasn't been brought up. ifconfig eth2 up makes it show up, but I still can't connect with wicd. What can I do?
I'm running Ubuntu 10.04, generic 2.6.32-22 kernel, MacBook 5,5 using the Broadcom STA driver. (more details below)
Code:
*-network
description: Wireless interface
product: BCM4322 802.11a/b/g/n Wireless LAN Controller
vendor: Broadcom Corporation
physical id: 0
bus info: pci@0000:03:00.0
logical name: eth2
version: 01
serial: 00:25:00:4b:df:4c
[Code]...
i was fed up after i can't connect to wifi using ubuntu. the problem happened after my router is being replaced to a new one because the old one got struck by lightning. good thing i dual-boot my laptop so i can access the internet using Windows 7 now.
i use the default network manager to connect to wifi before, but it all seem to be failed after the replacement of router. i also used Wicd but it failed to connect either. it says in the notification "disconnected: bad password" but the password was right. my wifi used WEP password with open authentication.
i even remove the WEP password and try to connect, but it failed. all i can do is to boot in windows 7 and surf internet there. what could cause this problem? is it the router, the telephone line? i can set the router settings if i want, but i don't know what causes the problem.
i'm running Kubuntu karmic and i've been using a 3G Huawei E1552 modem to connect to the internet, everything was going well when suddenly my modem stopped working. I've tried reconfiguring everything, i even reinstalled kubuntu from scratch with no success.Here's a part of my /var/log/debug
HTML Code:
Feb 8 17:14:01 alberto-laptop kernel: [ 1532.099883] usb-storage: device found at 7
Feb 8 17:14:01 alberto-laptop kernel: [ 1532.099888] usb-storage: waiting for device to
[code].....
I have updated the system this morning and the vpn stopped working!It gives me an error: invalid secrets.I use network manager to connect to a pptp vpn connection, I use fedora 12.Does anyone know the problem?
View 2 Replies View RelatedI followed (or at least tried to follow) tutorials on doing this. I installed network-manager-pptp and tried to configure network manager to connect to a VPN. In the settings when I select MPPE with 128-bit encryption, after I've selected it and applied it, I check the settings and it's invariably unchecked. I tried using KVpnc after getting frustrated with network manager, and I can't seem to get that working either. I've been trying to search for info on this, and I can't seem to find anything on why I can't select MPPE with 128-bit encryption. That seems like it might be why I'm unable to connect to the VPN?
View 1 Replies View RelatedI have a problem with network manager. I use Ubuntu 10.04 on a Dell Latitude D530. I used to have the same problem with Ubuntu 9.10 before I upgraded. I typically connect to two wireless networks: HOME and WORK. Both networks are set to automatic connection mode. I am at work, I connect to the network WORK. At the end of the day, I just close the lid and go home. At home, I open the lid and have the following problem: network manager still displays the network WORK whereas it is clearly out-of-range and it automatically tries to connect to it. It does so until network manager asks if the password is correct.
If I want to connect to HOME, I have to tell network manager to do so. Then, I receive a notification that I am disconnected to WORK. Next morning, I go to work, and I have the same problem, network manager tries to automatically connect to HOME. What I would expect from network manager: when I am at home, NM automatically connects to HOME and does not display WORK, when I am at work, NM automatically connects to WORK and does not display HOME.
I have ticked the box Connect Automatically in the OpenVPN setup I configured in the gnome network manager but it doesn't connect on startup. It connects perfectly ok if I manually select the VPN but i'd like it work immediately on launch.
I have autologin on Ubuntu but since there is no VPN password to decrypt I don't see why it should be a problem.
I have just started using fedora 13 and I am not sure if i am in the right area but here goes...today I was online in my fedora 13 partition on my laptop and I had been online for quite a while then I shut down my machine to recharge the battery then a couple hours later I turned it back on and all of a sudden my network manager applet was missing and I could not connect to the internet, I opened firefox and tried to get to my homepage but it basically just told me that I wasnt connected..
I suspected at first for some strange reason that MAYBE it was my NIC so I booted up into my vista partition and low and behold the internet works fine, so the problem is on the linux side, I have tried every command nm-applet but it just keeps saying an instance of nm-applet is already running, I have no clue how to restore the network manager and get my internet back and the only other piece of information I have is that earlier today I did do a bunch of security updates but the internet was working fine all day even after several reboots through out the day.
This is on Lucid, using a Dell Mini. I installed the required packages for a USB tether to my iPhone. Network Manager recognized it immediately as wwan0, but it doesn't connect. Also, it never asks me for the password to connect to the Personal Hotspot (as it does when I can connect from Windows).
View 3 Replies View RelatedI have a 5720 Mini PCIE broadband modem card and though it works, it won't connect automatically in a Ubuntu system. Network Manager says it is enabled when I right click on the icon, but when I do a left click it says it is disabled. I have to right click and disable and then enable before my Verizon connection will work.
View 1 Replies View RelatedI have been an Ubuntu user for a year or so. My level is still ultra n00b but I am trying. Whenever I update Ubuntu there is always a WiFi problem, always. So now I am having problems getting wifi to work in 10.10. In Network Manager I can view wifi networks fine but I cannot connect. I tried with wicd also but I got as far as "getting ip" and then it would hang up.
lspci
Code:
Code:
Code:
I am not sure what driver I am using as I don't know how to exactly ID my driver. I know there is a way to ID the driver using airodump-ng but I have yet to find it.
I have a feeling this is a driver issue as one time I was able to establish a connection that then dropped a few minutes later. I have a feeling I should be disabling/removing the current driver and replacing it with ipw3945 or possibly a driver ndiswrapped? The problem is I cannot figure out how to remove the current driver.
I was going to switch back to 9.04 but I thought I would try to manually figure this one out instead of taking the easy way.
So I just did a fresh install of CentOS 5.3 and ran an initial update how ever I cannot get the network manager to start. I found this page on the wiki - [URL]? highlight=(networkmanager) But when I try to run chkconfig NetworkManager on
View 9 Replies View RelatedI'd like to use NetworkManager on a freshly installed CenntOS 5 on laptop Lenovo ThinkPad T61p. I followed: [URL] Everything went OK, until I selected my active LAN connection in "Edit Connections". After clicking on "Edit", it's not possible to change anything - all is grayed-out. I'm guessing it's a permission problem. But I don't know the internal structure of NetworkManager and what files to look at. I was also expecting that after stopping the network service "Syetem->Admin->Network" would be inactive, but it isn't. Shouldn't the old network manager be uninstalled as well?
View 18 Replies View RelatedI'm using ubuntu karmic and I'm not able to connect to the internet with my reliance netconnect data card using network manager. Other distros like fedora, opensuse n sabayon connected easily with nm. Ubuntu detects the data card flawlessly but just doesnt connect.This problem has been persistent even in previous ubuntu versions, n I used to use wvdial. But downloading wvdial on some other comp with every dependency is really cumbersome.
View 6 Replies View Relatedwould like to connect my ZTE AC1710 usb modem to my computer. I use an Acer Aspire 5610Z.
View 1 Replies View RelatedIts my liillte headache with my hsdpa modem. using wvdial i can connect to the net huawei e220l but NetworkManager is a different story. # lsusb | fgrep HuaweiBus 001 Device 010: ID 12d1:1003 Huawei Technologies Co., Ltd. E220 HSDPA Modem / E270 HSDPA/HSUPA Modemi',m ok with wvdial and its gui wrapper(gnome-ppp) .i just would like it to be functional since my noob bro
View 2 Replies View Related