OpenSUSE Network :: 11.3 - Windows7 - Clear Internet Service And Use A USB Modem To Connect
Jan 9, 2011
I have a lenovo desktop pc (WIN7) that I connect to the interrnet with. I have a custom built box (SuSE11.3). I have clear internet service and use a USB modem to connect to the internet. Clear does not make a Linux driver yet... I can connect to the Internet through VMware desktop with SuSE as the guest OS. However, I want to connect my other system to a router and my other PC. Would I be able to access the web with the linux box? I have a free NIC card on both pc's, I'm just not savvy enough to network them so if anyone could explain or tell me if it is even posssible to network the 2, My goal is to run SuSE on one, WIN7 on the other and access the internet from both.
View 3 Replies
ADVERTISEMENT
Jun 4, 2010
I tried to connect to the huawei cdma EC325 modem. using the network manager applet. System asked which tpe of connection i selected cdma and gave the username and password for the account and the password for my opensuse account.Still i cannot connect to the internet using huawei ec325 modem.How to rectify the problem What shall i do next.
View 2 Replies
View Related
Jun 11, 2010
i've just installed opensuse 11.2 everything is working fine but i'm unable to connect to the internet through my adsl modem the network is shown to be active but after i configure the dsl connection i can't see any option from where to connect
View 1 Replies
View Related
Aug 5, 2010
I can not get NetworkManager to handle my Huawei E220 usb modem. I have searched forums and tried a lot of things. I have just upgraded from openSUSE 11.2 to openSUSE 11.3 using zypper. It seems to work fine except that umtsmon stopped to work, so for now my laptop has no connetion to internet at all. Here are some information about my settings:
I have used usb_modeswitch to make the device a modem. Am I right if I say that usb_modeswitch is a one time command, or does it swap the setting each time it is called? Anyhow lsusb states that the device is a modem. (All the time.) code...
View 7 Replies
View Related
Feb 9, 2010
I have installed WvDial (apparently) but it has no icon or launcher to start it by default, how do i get it to run? I also need basic set up how to. I am running Ubuntu 9.10 (Karmic) and network manager doesn't seem to be able to use my modem to connect to the internet (set up wizard works, appears connected, but then I get page not found error). Hence I wish to use WvDial to try to connect instead.
View 9 Replies
View Related
Nov 29, 2009
trying to make my 3G modem (a ZTE MF622) work with OpenSUSE 11.2. KNetworkManager is recognizing it (so I suppose it's not on Storage Mode), I can create the 3G connection and connect, but I can't navigate on any sites (ping gives "unknown host" for any IP). Also, the KNetworkManager applet doesn't show anything on fields "Name servers" and "Domains" (they are blank). Tried some instructions from the internet here and there, but didn't have any luck.
View 9 Replies
View Related
Dec 1, 2010
I had an ATT "2Wire" modem/router that was working but connection to the Internet was often poor. An ATT technician came to my home and swapped out the modem/router for the identical model. I changed the ESSID and WEP code to match the new unit and everything was fine with the following wireless units: a wireless desktop, two cellphones, three wireless Archos tablets, and a couple of e-reader tablets. So all seemed to be fine wirelessly. However...
My laptop (SuSE 11.0, KDE3) simply won't connect no matter what I do. I changed the ESSID and WEP info in the lappy exactly as was done with the other wireless devices named above. But no good. The lappy does see the modem/router (a good, strong signal appears in KNetworkManager). But it seems as if the modem/router is rejecting the lappy's attempted handshake using the new ESSID and/or WEP information.
I thought that perhaps there was something wrong with the lappy's wireless card, so I took it to a Starbucks to see if it would connect there on an open network, and it did without problem. So the lappy's wireless card appears to be working fine. It just won't talk to the encrypted modem/router at home. Here are the settings on the lappy. Hopefully something here is easily identified as the culprit. With all the clicking I've done it certainly is possible that I ticked something that should not have been ticked and just don't realize what I've done.
Network settings screen:
Global options tab:
Network setup method: user controlled with Network Manager
Change default route via DHCP (ticked)
[code]....
Why won't the new modem/router which is exactly the same as the old one except for the ESSID and WEP work with my lappy yet it does work with a bunch of other wireless devices?
View 9 Replies
View Related
Feb 8, 2010
i'm running Kubuntu karmic and i've been using a 3G Huawei E1552 modem to connect to the internet, everything was going well when suddenly my modem stopped working. I've tried reconfiguring everything, i even reinstalled kubuntu from scratch with no success.Here's a part of my /var/log/debug
HTML Code:
Feb 8 17:14:01 alberto-laptop kernel: [ 1532.099883] usb-storage: device found at 7
Feb 8 17:14:01 alberto-laptop kernel: [ 1532.099888] usb-storage: waiting for device to
[code].....
View 4 Replies
View Related
Jul 27, 2010
I'm using OpenSuse 10.3. I have a stick modem of Zain (Sudan), I use it for the internet. I need help on how to configure OpensUSE 10.3 so I can use it for the internet.
View 7 Replies
View Related
Oct 5, 2010
I am trying to connect my huawei e160 usb modem but it keeps failing and does not show on the Network Manager, checking on /var/log/messages this it what I get:
Oct 5 15:31:30 LPKENBITD002 modem-manager: (ttyUSB1): re-checking support...
Oct 5 15:31:30 LPKENBITD002 modem-manager: (Huawei): (ttyUSB1) deferring support check
Oct 5 15:31:33 LPKENBITD002 modem-manager: (ttyUSB1): re-checking support...
Oct 5 15:31:33 LPKENBITD002 modem-manager: (Huawei): (ttyUSB1) deferring support check
Oct 5 15:31:36 LPKENBITD002 modem-manager: (ttyUSB1): re-checking support...
Oct 5 15:31:36 LPKENBITD002 modem-manager: (Huawei): (ttyUSB1) deferring support check
View 9 Replies
View Related
Feb 14, 2010
I recently installed Open SUSE 11.2. It's a pretty cool OS. Anyway,sadly enough, I cannot access my internet connection via my USB internet modem. Worst of all, Open SUSE cannot detect the USB modem device. I am currently new to Linux and I may be overlooking something. I also clearly figured that Linux online is better than Linux offline from what I read from blogs and numerous posts. So in essence, I cannot fully appreciate the true power of Open SUSE 11.2 offline. Would there be a way to install my USB modem device?
View 1 Replies
View Related
Jun 12, 2010
Trying to move from Windows to OpenSUSE. I have installed OpenSUSE 11.2, and am having a hard time trying to connect to the internet using my nokia E65. I have tried to configure the modem thru YaST and it keeps showing that my nokia E65 modem is not configured, but adds another modem every time I configure using the edit button i.e. modem0, modem1 etc.
When i finish the configuration I get pop ups on the bottom right conner:
Notification from network management
WLAN interface attached
Network interface attached
But nothing happens afterwards. When I connect the phone it shows that it is recognized as a modem (probably). but when I click on the icon so it connects to my service provider "econet" it just says activating with a red x in the conner, and still nothing happens!
The following are the screenshots (still not sure how to attach files on this forum), may someone assist, with that too.
I really want to move from Windows but this is what's stopping me. the sooner I connect to the Internet through my phone, the sooner I leave Windows, since it's the only way I can connect to the internet.
I have tried wvdial, and I got the following:
View 9 Replies
View Related
Feb 28, 2010
Are there detailed instructions for Suse 11.2, anywhere, on installing a hardware dial-up modem and configuring it to get an Internet connection?
View 2 Replies
View Related
Jan 29, 2010
I just got Clear mobile Wimax. It uses a Motorola USB stick modem that comes with a Windows driver. I didn't see a Linux driver and was wondering if I could expect to see one for openSuse moblin for netbooks?
View 4 Replies
View Related
Feb 5, 2011
My router/adsl modem is not connected to a power supply so when power goes and comes the network will do a re-boot. Now the problem is my OpenSUSE network won't come back on! I set the static ip as Autoeth0 to eth0 however when network updates I losse eth0. Why is this happening? Why doesn't the PC simply re-connect? Can I do it via command line?
View 5 Replies
View Related
Apr 12, 2010
I installed Suse 11.2 on clean HD. I cannot connect to the internet. Seems like Suse didn't install drivers for on board ethernet card. It is a Marvell Yukon 88E8056. I'm new to this and don't know how to install the drivers.
View 3 Replies
View Related
Jul 25, 2011
My landlord upstairs just got a new modem and WiFi by Clear.com and when trying to get the WiFi to work...it just wouldn't connect with my laptop. They have 2 computers upstairs, one laptop and one desktop that recognized the WiFi and don't have any trouble using it. Wondering if there is something I have accidently clicked or changed to make it not connect. It does not have an error message, it just does not connect completely.
View 1 Replies
View Related
Jun 19, 2011
I have an adsl modem acting as a bridge to my router my setup was working well for more than year now , but then the internet went slow . I set the modem back to PPPoE the problem was with the DNS server of the ISP so using ifup i set the dns t 8.8.8.8 (google) the connection is back , but when i set the modem back as a bridge slow internet does the router know that my dns is 8.8.8.8 or i should set the dns on the router ? I can't see an option to set the dns on the router ( i just enter my username and password from the isp to use PPPoE mode ) by the way i called the isp support they kept telling me to restart , i told them i did but i never restarted my pc . I'm sure if i tell them i'm running linux they will blame the os !
View 2 Replies
View Related
May 21, 2011
how to connect my network data card to run internet on openSuse..
View 4 Replies
View Related
Jan 10, 2010
the thing is that I cant use Network Manager to connect to Internet, because it simply do not connect. The connection, although, awailable throught yast when i choose "traditional method with ifup", so everything is just fine, but if i need to reconnect, i have to reboot. How do I setup a !working! connection through Network Manager, or maybe i do not do something properly.
View 5 Replies
View Related
Jun 14, 2010
I use Ubuntu i can not work internet connection Please help me search for a solution but did not find
Use the USB modem model x060s.
View 3 Replies
View Related
Dec 17, 2009
I am trying Open Suse 11.2 KDE Live CD and don't know how to connect to the Internet. What do I do?
View 9 Replies
View Related
Dec 18, 2009
I installed 11.2 on an older HP Laptop which was running XP without any issues. Durring the install, the update processe failed (presumably unble to connect to respository). I am usind a wired connection and the nic is connecting to my router and is recieving an address via DHCP. I am also able to ping the workstion from the router's Web interface. However I am unbale to connect to the internet.I have turned off the Suse firewall via Yast and checked the settings against another computer running ver 11.1 .Everything appears to be correct but no joy.
View 9 Replies
View Related
Feb 24, 2010
So here is what I am trying to do. I want to connect my Open Suse 11 machine to the internet. I am almost there.
1. I configured my network card and eth0 is up.
2. I configured my DSL with user name and password and I am authenticated.
3. An IP address is assigned to me and the DNS servers are retrieved.
However I cannot ping or visit any website I use the YAST automatic configuration and kinternet to connect. Here are the gritty details
[Code]...
I do see that kinternet has trouble reading /etc/resolv.conf. It says 'permission denied' although read permissions are set on both /sbin/route and the path that it links to. This should not matter however since the existing entries are already there and valid. I also tried to turn off the firewall suspecting it could be a problem.
So I am being authenticated successfully ( verified with the logs ); assigned an IP; the route seems ok; firewall seems ok. But I cannot browse or do internet things I have been tweaking settings for 3 days now and all seems in vain. Do enlighten me on what I am doing wrong. I bet its something silly that I overlooked. I have had success configuring the same thing in red hat linux and browsing the internet without trouble. Is there something OpenSuse specific that I am missing ?
View 6 Replies
View Related
Mar 15, 2010
since installing opensuse 11.2 KDE, is that I can connect to the local resources when I'm not connected via the pptp vpn to the Internet but as soon as I establish an Internet connection, I cannot. Under Windows and other distros I've tried, this has never been an issue, usually I can connect to either local or Internet resources, interchangeably. In a nutshell, I don't know how to troubleshoot this.
View 9 Replies
View Related
May 31, 2010
I just finished a brand new install of 11.2 on a workstation and it can't connect to the internet at all. I can ping Google and I can ping devices on my local network but I can't browse any web pages. I am able to ping the workstation with my windows 7 workstation. I tried disabling the firewall. I have it set to use DHCP.
UPDATE:
I can connect to google via IP. So it appears to be a DNS type issue, is there some settings I am missing?
View 9 Replies
View Related
Jul 17, 2010
installed openSUSE 11.3 and round that both wireless and ethernet connections could connect ok to my router but couldnt access the internet. I think its a bug because I didn't have this issue in previous versions of openSUSE.
The solution is to go into the ip settings in the wireless configuration, select the option to manually assign ddresses (not DCHP) and
- enter the ip address of your router in the default gateway and DNS server addresses
- manually assign an ip address to your computer rather than have the router do it
- it has to be in the same range as your router -n normally 192.168.1.x where x can be any number not already used.
View 2 Replies
View Related
Sep 3, 2010
I upgraded from 11.2 to 11.3, and now I can't seem to get my network/internet connection working. I am using a router and a cable modem, and the connection is of course DSL. I am using wpa2 for security. I can't even FIND where to enter my wpa2 key. When I upgraded from 10.x to 11.2, there was no such problem.
View 5 Replies
View Related
Dec 15, 2010
I don't know whats happened but yesterday when i logged in i was unable to load any web pages. Today login and the same.ifconfig shows connection, I can ping whoever i want just can't get any web pages to load, can't even login to my Thomson router. Have tried with firefox, google chrome and konquerer
View 9 Replies
View Related
Jan 21, 2011
I have an Intel Mac that I recently added openSUSE 11.3 to to have a dual-boot system. This has been working fine for me for the last 5-6 months. Then on 1/18/2011 I shutdown my system and totally disconnected everything and moved it all out of my office, so new carpeting could be installed. After it was installed, I reconnected everything and confirmed that everything on my Mac side works just fine. Then I rebooted into Linux and everything worked until I tried to run Firefox to connect to the internet. I'm told every time that it could not connect to the server for whatever I tried to connect to. I AM NEW TO LINUX AND ANY KIND OF NETWORK/INTERNET PROBLEMS, SINCE I'M USED TO MAC WHERE EVERYTHING JUST WORKS. But, I did click on "computer" in the lower left-hand side of the menu bar at the bottom of the screen. This shows on the right-hand side under STATUS "Network: none" and then it states to click this to get it started or connected (I don't remember which) so I click it. This brought up a window asking me for my password and then a new window where it went through a checklist of things and presented me my network settings, which
means nothing to me. However, after this I tried Firefox again with not luck.
View 5 Replies
View Related
