I want to configure the Huawei E220 modem I recently bought in Fedora 10. I read lot of detail documents in the internet. All were interesting and explaining the wvdial.conf file. The problem I have is that, the file asks for the phone # to dial, username & a password. I don't have these information since my ISP didn't provide those. It works perfectly in Windows, in which above information are not needed, because when plugged in Windows, a software installation launches, which does the job to connect to the internet. So, is there a way to configure the modem to connect to the internet without those information. Because my ISP refuses to provide those, when I called there customer services.
I can not get NetworkManager to handle my Huawei E220 usb modem. I have searched forums and tried a lot of things. I have just upgraded from openSUSE 11.2 to openSUSE 11.3 using zypper. It seems to work fine except that umtsmon stopped to work, so for now my laptop has no connetion to internet at all. Here are some information about my settings:
I have used usb_modeswitch to make the device a modem. Am I right if I say that usb_modeswitch is a one time command, or does it swap the setting each time it is called? Anyhow lsusb states that the device is a modem. (All the time.) code...
I have a weird problem on my laptop. Everything works okey on PC though.
I'm using kNetworkManager on my OpenSuse 11.2 on PC.
Everything works fine there with the following settings: 1. Make a new GSM Connection in kNetworkManager and enter settings there 2. Edit etc/sysconfig/network/config file and set .....DNS_Policy from "auto" to "" 3. Enter openDNS to /etc/resolv.conf (nameserver xxx.xxx.xxx.xxx)
It works like that on my PC.
I did the same on my laptop. The modem connects fine, but the DNS'es ain't resolved. So skype etc will work, but no pages will open in Firefox for example.
What else should I need to do to make this work?
It's weird it works the SAME way on my PC, but doesn't on my laptop.
I have two laptops, all using Ubuntu Lucid. Just now I tried using a USB Modem Huawei E220 in both but was not detected as a modem. Why? Would have Lucid Ubuntu does not support Huawei E220? If yes, why? Whereas the older Sierra 881 could be used. For the record, before I use Ubuntu Karmic on both the laptop and all could use. Huawei E220
I have installed the 3 following pakages of Fedora 13 ozerocdoff-0.4-1.fc11.i386.rpm usb_modeswitch vodafone-mobile and after that I have given the command
vodafone-mobile-connect-card-driver-for-linux-debug /usr/lib/python2.6/site-packages/twisted/persisted/sob.py:12: DeprecationWarning: the md5 module is deprecated; use hashlib instead
[Code]....
GConf Error: Failed to contact configuration server; some possible causes are that you need to enable TCP/IP networking for ORBit, or you have stale NFS locks due to a system crash. See [URL] for information. (Details - 1: Failed to get connection to session: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.)
i have E220 usb modem which i managed to crack and make it work on the Airtel network here in india.The problem is i cant seem to make it work in ubuntu, the way it connects is as below :
i boot in windows and connect to internet Then reboot in ubuntu and then it works fine.and i have to do this everytime. appears like the device gets initiated by booting in windows.
I use Hauwei E220 modem to connect to the internet but for some reason it doesn't want to connect anymore. It works perfectly in XP, it picks just about every wireless network in my area (which I have no access to), it works beautifully if I plug it in before switching on my PC. If, however, I plug it in when the PC is on then nothing
Strangely, it used to work fine then somehow forgot what its supposed to do...
i'm running Kubuntu karmic and i've been using a 3G Huawei E1552 modem to connect to the internet, everything was going well when suddenly my modem stopped working. I've tried reconfiguring everything, i even reinstalled kubuntu from scratch with no success.Here's a part of my /var/log/debug
HTML Code: Feb 8 17:14:01 alberto-laptop kernel: [ 1532.099883] usb-storage: device found at 7 Feb 8 17:14:01 alberto-laptop kernel: [ 1532.099888] usb-storage: waiting for device to
I am trying to get a Vodafone USB modem to work - Huawei K3765 (which is a rebranded E169). It's supposed to be recognized by the kernel and just added through Network Manager, but - no luck. I also installed vodafone-mobile connect from here: [URL] (as well as the other packages). What happens when I start it - it doesn't see the modem. It's seen as a CD drive, and clicking "eject", "unmount" or "remove safely" on it doesn't help - it disappears, then several seconds later appears as a CD drive again.
I have fedora 14 and reliance netconnect Huawei EC325 modem. I am not enable to configure it. How to configure the modem by providing step-by-step instruction
I've been trying to make my FC13 Dell d620 work with a Huawei 3G usb modem mode E173. I can not switch the device to modem instead of storage with usb_modswitch. This is what I get on lsusb:
Where can I find details of how to set up a Huawei E173 on Natty? The network interface's status icon shows first "waiting for authorization" then it goes to "not connected" The modem hardware is showing up when it is plugged in:
I moved from Debian to Ubuntu a few months ago, with everything working fine, except my 3G modem (which worked with wvdial and umtsmon in Debian).
The packaging claims that it is a Huawei E160, but lsusb says different: E220 (12d1:1003).
I've followed various instructions from these forums and the wiki, and it seems to be being recognised as a modem (I can set up an O2 prepaid (UK) connection), but it refuses to connect.
My machine is running on a dual-boot Windows Vista/openSUSE 11.2 scenario. I have been trying to get my Huawei E1550 to work on Linux for the past few days trying numerous methods suggested in other forums from people with the same problem, but I have not produced any fruitful results.
Plugging in the USB modem results in Linux detecting it as a CD-ROM. I have installed usb_modeswitch in attempt to switch it to a modem, but Linux still fails to recognize it. Windows Device Manager and lsusb both give ProductID=1001 and VendorID=12d1 connected to USB1. I'm guessing since Windows detects the correct IDs, the Linux versions should also be correct. In any case, I ran usb_modeswitch with the Default IDs for /etc/usb_modeswitch.conf, which gave 0x1446 as the ProductID, not 0x1001. Upon running usb_modeswitch, the product ID could not be found so the program fails and quits asking if it's connected (and it is).
Just to test, I also ran wvdial which unsurprisingly did not detect the modem and could not send the init strings. All commands were done using root privileges. Also note that when after usb_modeswitch is run and upon plugging in the USB, NetworkManager pops up near the tray saying "attached" but still shows the device as a CD-ROM.
ubuntu I can not use a wireless modem huawei 160.type can only be used in windows.well to be used in my ubuntu linux? whether there is a script that used.
Apparently it works with >Ubuntu 9.04, but I need 8.04..I'd had an older modem working on the same system, so its really something to do with this newer ones.
Symptoms:
lsusb shows little, no /dev/ttyUSB* devices lsusb Bus 004 Device 001: ID 0000:0000 Bus 003 Device 001: ID 0000:0000
I am running OpenSUSE 11.4 on an HP 625 laptop and uses a Huawei EC1260 USB modem to connect to the internet. The configuration on NetworkManager worked prefect and the there is no problem connecting. The problem is when I disconnect the modem manually, I am unable to reconnect it via NetworkManager. I have to physically unplug the modem and insert it again, then only I can connect to the internet again
I am trying to connect my huawei e160 usb modem but it keeps failing and does not show on the Network Manager, checking on /var/log/messages this it what I get:
Oct 5 15:31:30 LPKENBITD002 modem-manager: (ttyUSB1): re-checking support... Oct 5 15:31:30 LPKENBITD002 modem-manager: (Huawei): (ttyUSB1) deferring support check Oct 5 15:31:33 LPKENBITD002 modem-manager: (ttyUSB1): re-checking support... Oct 5 15:31:33 LPKENBITD002 modem-manager: (Huawei): (ttyUSB1) deferring support check Oct 5 15:31:36 LPKENBITD002 modem-manager: (ttyUSB1): re-checking support... Oct 5 15:31:36 LPKENBITD002 modem-manager: (Huawei): (ttyUSB1) deferring support check
I am new to Linux and opensuse is lovely to me . However i have a problem, I dual boot windows and OpenSuse 10.3(because it plays mp3 out of the box) I actually tried newer versions but the problem is that I cant install this Huawei E1752 usb modem. I have failed people. Please help me. I need to use it for internet.
This is really weird, and I would like just this question answered: I've spent like 2 hours by plugging, unplugging, rebooting, and doing everything I could, but the modem wasn't working. When I did ls /dev/ttyU* it was showing up a list of 6 usb devices.
Code: /dev/ttyUSB0 /dev/ttyUSB1 /dev/ttyUSB2 /dev/ttyUSB3 /dev/ttyUSB4 /dev/ttyUSB5 And when I sent the command wvdialconf after looking into all the devices, it didn't recognize any modem.
The thing is, that by the time I was writing here for a solution, I disconnected the modem, and when I reconnected it I did a ls /dev/ttyU* just to copypaste the info, and Voil! there were just 2 devices, and wvdialconf worked out just fine! I would like to know what I was doing wrong, so I make sure it won't happen again.
I recently received my Ubuntu 9.10 CD, Kubuntu 9.10CD and Server Edition. I was recommended to do so by a friend because my computer Running on Windows Vista Home Basic with 512MB RAM has been extremely, unbearably slow for the last month or so I got the CD's yesterday and I ran the Ubuntu CD and everything was fine, I rebooted the Computer and it started up! It was great!! Really quick and responsive and easy to use and i LOVE it's features...
My only problem is my Broadband. I live in Ireland and I have my broadband with o2, it's quick and sufficient for my needs. I have a Huawei E270 usb modem (It's wireless broadband). And it wouldn't Work. I plugged it into my pc with Ubuntu up and running and it opened the File for o2 rather than the Interface for it. When I plugged the modem in there was a green lock symbol on the top right of the screen. Is Ubuntu even compatible with the E270 modem?
I've been trying out the netbook remix of 10.04 but I've been having some issues getting my Huawei modem to work. It detects the install cd and usb storage but it does not discover the modem.
This is the dmesg output after connecting the device:
Code: > [10540.912126] usb 1-4: new high speed USB device using ehci_hcd and address 9 > [10541.055850] usb 1-4: configuration #1 chosen from 1 choice > [10541.060834] scsi12 : SCSI emulation for USB Mass Storage devices > [10541.061799] usb-storage: device found at 9