I cannot install lm_sensors-2.5.5-3.i386.rpm nor lm_sensors-2.5.5-6.i386.rpm on RH 7.1.
The files complained by "failed dependencies" are present on my computer.
Why it fail to install?
Please help to fix the problem. code...
I was following a simple tutorial on how to program and compile a hello world program using assembly when I got this error;Quote:ld: i386 architecture of input file `hello.o' is incompatible with i386:x86-64 output.The tutorial told me to make two files;Quote:hello.asmsection .data;section declaration
msg db "Hello, world!",0xa;our dear string
len equ $ - msg ;length of our dear string
section .text;section declaration
[code]....
I'm running CentOS 5.4 on an Atom 230-based MSI MS-7418 motherboard. I'd like to monitor this host' CPU temperature as well as the HD's temperature, but can't get lm_sensors to work:Code: # uname -aLinux msi.workgroup 2.6.18-164.9.1.el5 #1 SMP Tue Dec 15 21:04:57 EST 2009 i686 i686 i386 GNU/Linux
# cat /etc/issue
CentOS release 5.4 (Final)
Kernel
[code]....
Trying to find the CPU temperature, I found this lm_sensors is what I need..I do this;
wget http://dl.lm-sensors.org/lm-sensors/releases/lm_sensors-3.2.0.tar.bz2
bzip2 -dv lm_sensors-3.2.0.tar.bz2
tar xvf lm_sensors-3.2.0.tar[code].....
I managed to get lm-sensors working it has no initialization at bootime:Quote:Do you want to generate /etc/sysconfig/lm_sensors? (yes/NO): yCopy prog/init/lm_sensors.init to /etc/init.d/lm_sensorsfor initialization at boot time.You should now start the lm_sensors service to load the requiredkernel modules.I've already copied 'prog/init/lm_sensors.init' to '/etc/init.d/lm_sensors' but it doesn't work. I still have i manutally have to load 'coretemp' to be able to have a temperature output from the command "sensors"
View 5 Replies View Relatedhow should I read below output of lm_sensors ? Im interested ONLY with temp1 and temp2.I suspect that temp1 presents motherboard chipset temp and temp2 CPU temp. I hope this is like this... but I have no 100% assurance.
Code:
~# /usr/local/bin/sensors
w83697hf-isa-0290
[code]....
I need the nspluginwraper.i386 how can i install it
View 1 Replies View RelatedI have a Intel machine and what do i do? I install the AMD64 and not the i386. DO i need to uninstall the AMD and instal the i386 for my 64 bit machine?
View 10 Replies View RelatedI have a problem when install Cenos5.5-i386-dvd.iso on VMware6.5. My host os is Windows2003 sp1 and I installed Centos via VMware on host windows2003. After powering on VM, it loaded the ISO file but showed me an error like that " Could not fine kernel image : linux " then boot process failed.
View 1 Replies View RelatedI have a problem with monitoring CPU temperature on x86_64 OpenSUSE 11.3. It returns the following:
it8720-isa-0290
Adapter: ISA adapter
in0: +1.18 V (min = +0.00 V, max = +4.08 V)
in1: +1.58 V (min = +0.00 V, max = +4.08 V)
[code].....
I use a Core i5 750 on a Gigabyte GA-P55A-UD3 motherboard. I could not find anything useful neither by googling, nor by using the forum search.
I am operating openSUSE 11.2 x86_64 KDE4.3 after installing sensors then adding
Code:
acpi_enforce_resources=no
to my optional kernel parameters and running
[code]....
With kernel 2.6.35 I get wrong readings on lm_sensors. They are about 20C off than the real values (e.g. if the CPU is at 50C, lm_sensors will show 70C). If I boot with any other kernel (like 2.6.32) I get the correct values. I'm using the 'coretemp' module on an Acer 7720 laptop. My distro is 64-bit Arch Linux.
View 2 Replies View Relateddownloaded the install dvd mounted it and ran it but I am getting an error line 55 of the kickstart file: section does not end with %%end install exited abnormally.
View 3 Replies View Relatedafter download CentOS-5.5-i386-LiveCD-Release2 i did not found install option ? how can i install it ??? on my laptop ?
View 3 Replies View Relatedlm_sensors failed after configuration by sensors-detect.
server3:~ # rclm_sensors start
Starting up sensors: failed
/etc/sysconfig/lm_sensors
[code]....
I recently built a cluster with Centos 5.3 and nodes that used different versions of the w83627ehf sensors chip. On some nodes sensors-detect detected the chip:
Found `Winbond W83627DHG Super IO Sensors' Success!(address 0x290, driver `w83627ehf')
But starting lm_sensors returned the error: Starting lm_sensors: No sensors found!
On other nodes sensors-detect did not detect the chip at all: Found unknown chip with ID 0xb073(logical device B has address 0x290, could be sensors)
[Code]....
Installing f10 on an x86_64 platform from CD or netinst. I can't seem to find a way to have it install i386 compatible (32-bit) software at the same time. Is there a repo that has to be enabled? In f8 i think it was just a box to click somewhere.
View 13 Replies View RelatedI would like to try out fc10 on an old, k6-2 pc. Last night I tried to download the dvd, but firefox 'completed' the download with only 1.2/~3xg, and of course it didn't work.
I am trying a test net installation in VirtualBox, so far so good.
However, I would rather have a more complete installation on hand and I'm looking at the full install cd's --there are 6 of them.
[url]
Are all 6 required for a minimal install, or could I get by with one (or two, etc)? For example, with debian installation cds you can use just the first one -- the rest are just a complete set of packages for everything +kitchen sink.
I have VISTA home installed in my HP DV5 laptop and I have installed MS Virtual PC. When I try to install Fedora 11 i386 get stop at "SMP alternatives: switching to UP code" and won't proceed.But I installed Fedora 11 i386 in my desktop using same steps it work fine.
View 2 Replies View Related Im trying to install iseriesaccess for linux. I've had to use the i386 version and the 64bit says it has not 5250 emulator which is the reason im installing it. I have had a good look and cant get it to solve these dependencies. Has anyone else tried and got this working?
[ltodd2@zeus Downloads]$ rpm -ivh iSeriesAccess-5.4.0-1.6.i386.rpm
error: Failed dependencies:
libodbcinst.so.1 is needed by iSeriesAccess-5.4.0-1.6.i386
libodbc.so.1 is needed by iSeriesAccess-5.4.0-1.6.i386
libstdc++.so.5 is needed by iSeriesAccess-5.4.0-1.6.i386
[Code]...
Fails to insatll from a SD card using USB, it looks for a CD rom when there is none... will not allow me to go on without a CD rom? i need to encrypt my drive? why don't the normal cd do this just like the other linux sysetems? hide it if you have to.
View 1 Replies View Relatedim trying to install wine1.3 and i need to upgrade libc6-i386 so i let apt-get try to do it, but it hangs at unpacking the deb, normally it has no problem no error occurs just sits there like its a huge deb but its only 3mbs. ive tryed using synaptic and doing the following.
sudo rm /var/lib/dpkg/lock
sudo dpkg --configure -a
sudo rm /var/cache/apt/archives/lock
sudo apt-get check
sudo apt-get clean
[Code]..
Code: [root@test ank]# uname -a
Linux test.testbox.com 2.6.9-67.0.0.0.1.ELhugemem #1 SMP Sun Nov 18 00:31:12 EST 2007 i686 i686 i386 GNU/Linux I am unable to install glibc-2.3.4-2.41.i386.rpm
ode: [root@test ank]# rpm -Uvh glibc-2.3.4-2.41.i386.rpm
warning: glibc-2.3.4-2.41.i386.rpm: V3 DSA signature: NOKEY, key ID b38a8516
error: Failed dependencies:
glibc-common = 2.3.4-2.41 is needed by glibc-2.3.4-2.41.i386
glibc = 2.3.4-2.39 is needed by (installed) glibc-headers-2.3.4-2.39.i386
glibc = 2.3.4-2.39 is needed by (installed) glibc-devel-2.3.4-2.39.i386
glibc = 2.3.4-2.39 is needed by (installed) glibc-utils-2.3.4-2.39.i386
I wrote a script which send email from linux box.
While i am execute this script i am getting the following message.
/usr/sbin/sendmail: No such file or directory
after searching some posts , i got to know that we should install an rpm file required for sendemail.
i downloaded the file from well known websites. and tried to install using rpm command
rpm -U --nodeps <rmpfilename> --force.
I am unable to install the rpm file, even i am not getting the error meesage on the prompt.
Is there any way to check why the rpm is not getting installed.or there are any pre requisites to install this send email rpm.
prior to this i installed mail rpm on th linux Box
There's a certain program I'm trying to run that will only work with the 32-bit version of a certain library - the 64-bit version included in the repository won't work for it. I found an i386 .deb package online (made for ubuntu but it should work with regular debian), but when I try to install it, it says incorrect architecture, use amd64 version instead.
How can I force it to accept the i386 version of this package?
I got a i386.bin software,but I can't installed it on my amd64 Debian.
Quote:
#dpkg -i --force-architecture .i386.deb
can install i386.deb software,but how to install the i386.bin?
startx does not successful,see following for details:
X Window System Version 7.1.1
Release Date: 12 May 2006
X Protocol Version 11, Revision 0, Release 7.1.1
Build Operating System: Linux 2.6.18-164.6.1.el5 i686 Red Hat, Inc.
[code]....
waiting for X server to shut down FreeFontPath: FPE "unix/:7100" refcount is 2, should be 1; fixing.
It seems I have some problem with glibc i686 on my VIA CPU. How can I force to install glibc i386.rpm instead of i686 in the clean installation process?
View 1 Replies View RelatedI am having problems installing Debian 7.7 i386 on the newest HP DL380 GEN9 server with P440ar storage array. The disk detection during installation fails to detect the array.
I have pinpointed the problem to hpsa.ko driver to be outdated as I need a minimum version from September 2014. I have already tried following the guide on " [URL]" but the driver compiling from sources fails (guide is from 2012).
Here is where I got the latest sources: [URL]....
Is there any possible way to install this debian version with this storage array? Newer kernel version is really not an option for me.
"3.2.0-4-686-pae #1 SMP Debian 3.2.65-1+deb7u2 i686 GNU/Linux"
when trying to install bibblelite-4.10.1-1.i386.rpm on my brandnew openSUSE 11.2 system I get
error: Failed dependencies:
libstdc++.so.5 is needed by bibblelite-4.10.1-1.i386
libstdc++.so.5(CXXABI_1.2) is needed by bibblelite-4.10.1-1.i386
libstdc++.so.5(GLIBCPP_3.2) is needed by bibblelite-4.10.1-1.i386
libstdc++.so.5(GLIBCPP_3.2.2) is needed by bibblelite-4.10.1-1.i386
Is there a general problem with Bibblelite on 11.2 or shall just install the packages listed in the error message? Where do I find libstdc++.so.5 for 11.2