OpenSUSE :: Lvm2-clvm Will Not Install On 11.3 X86_64
Jan 4, 2011
Running 'zypper install lvm2-clvm' results in a message: Resolving package dependencies... Problem: nothing provides libcpg.so.2()(64bit) needed by lvm2-clvm-2.02.45-16.2.x86_64 Solution 1: do not install lvm2-clvm-2.02.45-16.2.x86_64 Solution 2: break lvm2-clvm by ignoring some of its dependencies So it cannot find the cpg library, which appears to be a part of openais (if I believe google). I have configured the following repositories:
[Code]....
What could be the problem here? Am I just missing a repository or is cluster LVM not supported on opensuse 11.3?
View 9 Replies
ADVERTISEMENT
Sep 7, 2010
I've got a big problem using lvm2 with pacemaker. My installed packages age:
lvm2-clvm v: 2.02.45-11.3.1
pacemaker v: 1.0.1-20.3
openais v: 0.80.3-26.2
I'm currently using 2 virtual machines with opensuse 11.2 (virtualbox). The network and the cluster is working fine, running /etc/init.d/openais start the cluster goes up and:
[Code]...
View 1 Replies
View Related
Jan 4, 2010
I have two ext3 partitions within an encrypted lvm2 volume. when i start up my system it says that there are 0.3% non contiguous blocks.
This is my steup:
When i want to repair with repair system from dvd it tells me that the repair and check operation for encrypted LVM devices is not supported. so how can i fix my filesystem?
View 4 Replies
View Related
Aug 3, 2010
Attempting to compile an application that is not located in any of the repos yet for 11.3 64 bit. I have downloaded the appropriate src and untarred it. However, when I attempt to run the ./configure command here is the error I receive. checking build system type... Invalid configuration `x86_64-unknown-linux-': machine `x86_64-unknown-linux' not recognized configure: error: /bin/sh ./config.sub x86_64-unknown-linux- failed
I have made sure that I have all kernel-headers packages installed and am unsure as how to proceed. I tried using the command "./configure --build=x86_64" and then receive an error stating that the "SYSTEM IS NOT SUPPORTED" and continued errors stating that gcc is not installed, eve though it is.
View 5 Replies
View Related
Aug 2, 2010
How can I install Mplayer for openSUSE 11.3 x86_64 The 1 click install from packman is not working and the download install is asking for libopencore-amrnb.so.0 but llibopencore-amrnb0(x86-64) = 0.1.2-1.pm.3.1 is installed
View 9 Replies
View Related
Mar 21, 2010
I was thinking of trying out the UEFI support that HP has in my laptop BIOS in the next few days. My reasons is that I get a custom boot logo... and (hopefully) a better boot-speed. What is the current state of affairs with the openSuSE UEFI/EFI install support on a empty hdd for x86_64 does anyone know? (badly worded I apologize) This may seem naive but I have struggled to answer this with most posts being about Mac's for obvious reasons.
Specifically, Do I have to have any custom knowledge on formatting the HDD with a GPT partitions or does the installer do this for you? Secondly, How well does the UEFI bootloader tie in with the config tools in YaST2? (I would like to have UEFI but if it turns into some headache in setting up the boot area by hand each time the kernel updates I will forget it.) I can safely say this will be a machine with only openSuSE installed as an OS, no need for any others or any dual-boot problems. This isn't overly urgent and I will dedicate (at least) a whole weekend to tweaking once I buy a new disk and install openSuSE on it. If nobody knows then I will dive in head first and report how I find it and any problems (and severity).
View 7 Replies
View Related
Jul 2, 2010
I can't install gnome-mplayer on my openSUSE 11.2 I used the " 1-click insall" I also tried manully installation, got below errors # rpm -ivh gnome-mplayer-0.9.9.2-9.1.x86_64.rpm gnome-mplayer-lang-0.9.9.2-9.1.noarch.rpm error: Failed dependencies: MPlayer is needed by gnome-mplayer-0.9.9.2-9.1.x86_64 libmusicbrainz3.so.6()(64bit) is needed by gnome-mplayer-0.9.9.2-9.1.x86_64
View 4 Replies
View Related
Feb 27, 2010
I tried installing the RPM from tcpflow website. error: Failed dependencies: libpcap.so.0.6.2 is needed by tcpflow-0.21-1.i386 I installed libpcap1-32bit, but doesn't help. I tried added soft-link to libpcap.so.1.0.0 from libpcap.so.0.6.2 to workaround, doesn't help. hen I DLed the tarball, ./configure gives an error, even after including --with-pcap=/usr/lib64/libpcap.so.1.0.0 checking for --with-pcap option... configure: error: /usr/lib64/libpcap.so.1.0.0 does not exist I CAN'T install the rpm, I CAN't compile from source. I can't find this program on any suse repo. I need to use this prog -- what can I do?
View 14 Replies
View Related
Mar 16, 2010
Yesterday I applied the su security patch to my openSuSE 11.2 x86_64 system.After applying the patch, any attempt at su failed, and after rebooting the system earlier this morning any login (root, user, otherwise) fails with a "Permission Denied".Is it possible that the su update somehow messed up my (standard) pam settings?
View 10 Replies
View Related
May 29, 2011
I've trouble compiling libeio on my openSUSE 11.4 x86_64:
[Code]...
View 9 Replies
View Related
Mar 15, 2010
What I did not realize was, that DLM uses the external Ethernet Interface even when talking to the local machine/node. So iptables was blocking my DLM daemon. With iptables down or the TCP port for DLM opened, cman starts, mount works.What I have here is a fibrechannel SAN which will be directly attached to several servers in the near future. Thise servers should be enabled access to a single filesystem on the SAN (shared).I heard that the right filesystem choice for this kind of setup would be GFS, because it has a Distributed Lock Manager and one FS journal for each node.
But I am having trouble setting up GFS. I have managed to create a GFS on a small testvolume (local HDD so far), but am unable to mount it. It seems that GFS/DLM needs a lot of cluster services to run, which I do not all understand / know how to correctly setup. Also: Will the lock_dlm stuff need Ethernet communications to handle file locks? And if so, will it fetch the node list from /etc/cluster/cluster.conf to determine who to talk to?
View 1 Replies
View Related
Nov 26, 2010
I have a working Fedora14 system. /boot is on sda1.
Here is my system:
Code:
I would like to install Grub2 to have /boot in LVM2 as well. Is there a guide for it or can someone help me with this task?
View 5 Replies
View Related
Jun 1, 2010
I've done a search thru the forums on a recent headache but couldn't find anything. now we all know that windows installations knackers the grub boot-up, and it becomes modus-operandi to repair the boot loader, with a live distro. however, in my current dual boot system (vista.sp2/fedora12), i've done a clean install of windows7 over the current windows ntfs partition. as standard, the boot menu would vanish. but when i put in the live-linux cd, gparted now shows the fedora partition (sda6) as LVM2. i'm somewhat of a neophyte with linux, but fedora12, suse11.2 and ubuntu don't seem to yet support this file system. since i don't have critical data on the fedora partition yet, i usually wouldn't mind reformating this part', but the wireless chipset on my laptop cost a fortune on cups of coffee and beer to install, and in addition i used the fedora12 FEL spin and want to keep the installation intact. is there anyway to make the LVM2 indentifier back to ext3 or 4 and repair grub form there (without loosing the current partition kernal etc.)?
View 2 Replies
View Related
Oct 14, 2010
Subprocess failed. Error: RPM failed: installing package xen-4.0.0_21091_06-0.1.1.x86_64 needs 27MB on the /boot filesystemI seem not to be able to change the size of the /boot, but 11.2 loads okay but not 11.3There only 19MB left from 66 and I can't make it bigger, I hope there is someone thathas seen this. I would like to see some of the update with XEN.
View 1 Replies
View Related
Feb 20, 2010
In installing 11.2M2 I get a message in the Installation Screen indicating that
booting sees an "Unsupported combination of hardware platform x86_64 and
bootloader grub".
View 1 Replies
View Related
Apr 18, 2010
I am planning to install 10.4 when it arrives. And am not going to upgrade because i upgraded from 9.04 to 9.10 so now i need to refresh the system.But I have all my partitions except root using lvm2 logical volumes. My question is : What is the safest procedure to install 10.4 on an existing lvm2 without losing my files/partitions
View 2 Replies
View Related
Aug 6, 2010
after random chashes of openSUSE 11.3 x86_64 on my Acer Aspire 5720z I found a lot of messsages on the log
Code:
mcelog: failed to prefill DIMM database from DMI data
dmidecode seem ok for me
Code:
sharwyn:/var/log # dmidecode
# dmidecode 2.10
SMBIOS 2.4 present.
[Code]...
View 1 Replies
View Related
Aug 10, 2011
on a newly installed opensuse 11.4 x86_64 I am unable to find the settings to switch keyboard layout from english to german to french or any other language .it used to be in the system settings Keyboard-->Keyboard layouts -->> activate german btw french etc...
View 2 Replies
View Related
Feb 10, 2010
I just tried to install mythvideo 0.22 from the packman repository and Yast tell me it requires python-imdb. Havent been able to track down an rpm for opensuse 11.2 x86_64. Is there any way to request that this rpm be built?
View 2 Replies
View Related
Jan 18, 2011
I am trying to install the ATI 10-11-x86.x86_64 But I have problems attached the installation log file
[Message] Kernel Module : Trying to install a precompiled kernel module.
[Message] Kernel Module : Precompiled kernel module version mismatched.
[Message] Kernel Module : Found kernel module build environment, generating kernel module now.
AMD kernel module generator version 2.1
doing Makefile based build for kernel 2.6.x and higher
[Code]...
View 2 Replies
View Related
Aug 3, 2010
I have a problem with monitoring CPU temperature on x86_64 OpenSUSE 11.3. It returns the following:
it8720-isa-0290
Adapter: ISA adapter
in0: +1.18 V (min = +0.00 V, max = +4.08 V)
in1: +1.58 V (min = +0.00 V, max = +4.08 V)
[code].....
I use a Core i5 750 on a Gigabyte GA-P55A-UD3 motherboard. I could not find anything useful neither by googling, nor by using the forum search.
View 1 Replies
View Related
Sep 29, 2010
I am using amarok-2.3.1-32.1.x86_64 kde45 repo 11.3 Tried OSS version too All other audio functions. Using Clementine ATM which is great.
View 4 Replies
View Related
Dec 16, 2010
I had a opensuse 11.1 X86_64 system with openoffice. This has been replaced by an opensuse 11.3 X86_64 system with openoffice 3.2.1.4. I have many pps files and these worked complete with sound on the 11.1 system but there is no sound on the 11.3 system. The 11.1 system has gone and was overwritten by Windows 7 so I can't verify the build. I know I made lots of changes to the 11.1 system in order to fix various problems and openoffice could well have come from a factory repo.
What I need to know is what is needed to make impress play pps presentations as it did on 11.1 and does on windows 7. I searched on the internet and it appears that the novell version of ooo may use gstreamer. I have loaded many gstreamer packages from packman including plugin-good but still get no sound. Starting impress from a command line does not produce any error messages.Does the novell openoffice use gstreamer or java multimedia? I have not yet tried the java option I could try downloading the novell openoffice source and try to work out what it is using. I am not sure that I have the time to go searching through the source and probably trying to compare it to the ooo source
View 9 Replies
View Related
Mar 15, 2011
It looks like the ocfs2console is broken on openSuse 11.4 64bit. I tested on several servers and my laptop. It works under 11.3 x86_64 but that uses Python 2.6. OpenSuse 11.4 uses Python 2.7.
I tried to submit a bug but I can't seem to get my email address verified so I can use the bug tracker.
Server1:~/python-gtk/pygtk-2.12.1 # ocfs2console
ERROR: Unable to initialize the windowing
system: The CObject type is marked Pending Deprecation in Python 2.7. Please use capsule objects instead.
Server1:~/python-gtk/pygtk-2.12.1 # uname -a
Linux Server1 2.6.37.1-1.2-xen #1 SMP 2011-02-21 10:34:10 +0100 x86_64 x86_64 x86_64 GNU/Linux
Server1:~/python-gtk/pygtk-2.12.1 # python
Python 2.7 (r27:82500, Aug 07 2010, 16:54:59) [GCC] on linux2
View 2 Replies
View Related
Aug 10, 2011
When I run the YAST Online Update OR Software Management OR Zypper, the Updates (or install of new software) fails when the download of the Delta RPM reaches 98%. I have added ALL of the community repositories and have Imported the appropriate certificates. When watching the DeltaRPM or normal RPM download, it starts the download at approx. 4Mbs/sec until it reaches 98% of file downloaded. Then, the speed drops to 0 B/sec and the file download fails. This then prompts a Retry which again fails when it reaches approx 98% download.
It does not matter if I am doing an Online Update, Doing a Software Management (to install new software) or using Zypper in a Terminal session, the result is the same. I have even gone so far as to connect the machine DIRECTLY to the internet, bypassing all firewalls so as to ensure it is not a firewall issue.
[Code]...
View 2 Replies
View Related
Aug 10, 2011
When I run the YAST Online Update OR Software Management OR Zypper, the Updates (or install of new software) fails when the download of the Delta RPM reaches 98%. I have added ALL of the community repositories and have Imported the appropriate certificates. When watching the DeltaRPM or normal RPM download, it starts the download at approx. 4Mbs/sec until it reaches 98% of file downloaded. Then, the speed drops to 0 B/sec and the file download fails. This then prompts a Retry which again fails when it reaches approx 98% download. It does not matter if I am doing an Online Update, Doing a Software Management (to install new software) or using Zypper in a Terminal session, the result is the same.
I have even gone so far as to connect the machine DIRECTLY to the internet, bypassing all firewalls so as to ensure it is not a firewall
[Code]...
View 4 Replies
View Related
Jan 19, 2010
I have followed the opensuse sound troubleshoot pages and can't get it to work. The onboard sound does work in Sudix, out-of-the-box so I know it's not me plugging in my headphones in the wrong socket. Maybe Sidux works because it's newer? I did update opensuse 11.2 before I started again and I did install the new alsa, but that still didn't fix it, I only installed the latest stable build. Is there a development branch that may support my sound card? Anyway, here is the vital info:
[Code]
View 8 Replies
View Related
Dec 10, 2010
Built a new machine 2 weeks ago and installed openSUSE 11.3 x86_64 on it using the express setup (or whatever it was called). I have always done a manual setup in the past, but wanted to try out the fast way. This is my first experience with openSUSE 64 bit (always used 32 bit in the past). I have used SLES 10 64 bit without problem.
When I shutdown openSUSE the machine does not power off. It has always done this from after the initial install and after any updates. It does reboot just fine. Same behaviour if I shutdown from the GUI or from terminal as root. I either get a General Protection Fault or an OOPS with PREEMPT SMP.I must power off the machine manually and disconnect from power before restarting. System is ASUS M4A78T-E Motherboard, AMD Phenom II X6 1055T CPU, 2 x Corsair XMS3 4GB DDR3 RAM, EVGA GeForce 8400 GS 512MB I have updated the motherboard BIOS - no change.
View 4 Replies
View Related
Nov 23, 2009
I am unable to get audio from flash videos on sites like ...... When I run firefox from the command line I get the following output.
> firefox
*** nss-shared-helper: Shared database disabled (set NSS_USE_SHARED_DB to enable).
ALSA lib conf.c:3009snd_config_update_r) Cannot access file /etc/alsa-pulse.conf
ALSA lib pcm.c:2205snd_pcm_open_noupdate) Unknown PCM default
ALSA lib conf.c:3009snd_config_update_r) Cannot access file /etc/alsa-pulse.conf
ALSA lib pcm.c:2205snd_pcm_open_noupdate) Unknown PCM plughw:0,0
I have tried reinstall of alsa, libasound. I was having 32-bit flash player; but there was no sound. Now I am using 64-bit flash player from adobe website, yet no sound still. I do not have pulseaudio. The file alsa-pulse.conf does not exist. Somehow, my system thinks there is pulse while I have it uninstalled.
View 9 Replies
View Related
Sep 8, 2010
How do I set up a 256mb ramdisk on opensuse 11.3 x86_64 ? - The /boot/grub/menu.lst content reads as:
# Modified by YaST2. Last modification on Mon Aug 30 11:33:28 EST 2010
# THIS FILE WILL BE PARTIALLY OVERWRITTEN by perl-Bootloader
# Configure custom boot parameters for updated kernels in /etc/sysconfig/bootloader
default 0
timeout 8
gfxmenu (hd0,1)/boot/message
[Code]....
View 3 Replies
View Related
