openSUSE 11.4 64 bitsI have "sensors" package installed and configured with sensors-detect.The cpu temperature monitor plasmoid worked on kde 4.6.0 without problems but after installing 4.6.2 the monitor do not show any info.By running "sensor" from konsole I can see the temperature for both processors so it seems to be something related with the kde update
View 9 RepliesI have a problem whit this plasmoid.If I add this plasmoid while amarok runs, It works correctly.But if I close Amarok e then I run it again, plasmoid doesn't work.
View 2 Replies View RelatedI'd like to install the following plasmoid HDAPS monitor KDE-Look.org. For some reason it is no longer available for openSUSE.
how I should compile this and then install it.
EDIT: should have specified I'm using 11.4 and KDE4.6.3
I had to reload my openSuSE 11.1 and reloaded KDE 4.3.4 from KDE Repositories and did an unconditional update on KDE Core and Community to ensure I got all the current versions back.
I am now having an issue with at least two plasmoids that is regularly used. When I attempt to add them to the desktop, I get the message "component not found". This happens to at least these two, yasp and yawp for system status and weather. It may happen to others, I haven't tried.
They are both loaded and both are present in /usr/share/kde4/services. I removed them using YaST, then rebooted, then re-added them, then rebooted and still get the same result, component not found.
I'm just curious as to where I can find an Eye Dropper plasmoid for my KDE 4.4 Desktop. I'm pretty sure I had one installed and working a few weeks ago before I reinstalled, but I can't seem to find one anywhere.
So, do any of you have a link or anything to where I can find an Eye Dropper / Color Chooser plasmoid? It doesn't actually have to be a plasmoid, I just need one that isn't tied to a specific application.
Every time I get an email, I receive a couple of notifications for that email and the notification sound plays twice as well. If I disable the notifications for gmail plasmoid, I don't get any notifications at all - which means that the double notifications are really triggered by gmail plasmoid.
View 1 Replies View RelatedI had some difficulty getting Plasmoid to work on to connect to a WPA2-Enterprise Network. The Cert file is in DER format which is something like this "XXXX.cer" After I filed a bug report I got a respond to try the updated Plasmoid from this Repo:
Index of /repositories/KDE:/UpdatedApps/openSUSE_11.4 To use it you have to first install your certificate in openssl using terminal. First copy the certificate into the ssl directory (In OpenSUSE it is /etc/ssl/certs/)
1) sudo cp path_to_file /etc/ssl/certs/Then install it (If you don't do this it will fail) Source:http://gagravarr.org/writing/openssl...tml#Installing
2)sudo ln -s filename_of_certificate `openssl x509 -hash -noout -in filename_of_certificate`.0
3)Then after that when using Plasmoid to connect check the box use system certificate.
It should work like it worked for me but I still think certificate handling needs a lot of improvement.Pointing the cert directly from plasmoid does not work.
I received an update yesterday and now my analog clock plasmoid is no longer functional. It's strange too because when I change a setting in the plasmoid, it'll magically come to life. I ran plasma-desktop in terminal to catch an error output, but nothing came up.
Useful info:
Running KDE 4.4.0 release 223
Opensuse 11.2
After digging around in vain in my local .kde4 I am unable to find where the RSSNow plasmoid stores the feeds. It apparently wants to keep them secret forever.
(Man - Plasmoids are okay, but the utter lack of documentation for them makes them far less useful than then could be.)
I'm trying to monitor the temperature of my GPUs (multiple ATI 5970) in my computation cluster. Problem is that the aticonfig tool does not work in headless mode
# /usr/bin/aticonfig --od-gettemperature No protocol specified ERROR - X needs to be running to perform ATI Overdrive(TM) commands
and even worse if I try to run aticonfig with my monitoring user (munin) it will ask to be executed as root. Is there a simple way to read the temperature of the GPUs without having to resort to X?
There is a question, i'd like to ask: is there any decent program to monitor HDD temperature for linux? WHy are they so few? Suse Install repositories do not show any that could be installed. I used to use hddtemp on my previous 11.2 gnome installation, but it seems now something gone wrong, and i cant get this program anymore through: "sudo apt-get install hddtemp" and receive "sudo: apt-get: command not found", so as i am a newbie i can barely guess what is wrong. maybe there are any other programs to get this thing running. Its really puzzling because every laptop user need such tool badly, and i do not understand why is there so many monitor tools for cpu temperature and not a single good for hard drive which is far more important than cpu temperature, that rises and drops constantly as soon as your fans are fine???
View 2 Replies View RelatedI installed opensuse 11.3 to my laptop.Toshiba L505-13w satellite. core i5 2.27 ghz , 4gb ram, 1gb ati display.I can't measure cpu temperature. I tried "acpi -t" and sensors but nothing happened.I also tried system information widgets from plasma menu.Still I can't see my cpu temperature. Can anyone help me about this problem? I want to see my cpu temp.
View 1 Replies View RelatedI'm using default KDE openSUSE 11.3 64 bit In windows I can see the temperature of my HP laptop (cpu I suppose). Is there a facility for viewing that in Linux / openSUSE. Maybe in KDE, maybe in Yast, wherever?
The reason is that my laptop's temperature and fan speed increases slowly when I convert large video files from one format to another and the computer eventually shuts down spontaneously when the temperature becomes critical. I'd like to watch this so I can prevent it. So I need the app.
I have a problem with monitoring CPU temperature on x86_64 OpenSUSE 11.3. It returns the following:
it8720-isa-0290
Adapter: ISA adapter
in0: +1.18 V (min = +0.00 V, max = +4.08 V)
in1: +1.58 V (min = +0.00 V, max = +4.08 V)
[code].....
I use a Core i5 750 on a Gigabyte GA-P55A-UD3 motherboard. I could not find anything useful neither by googling, nor by using the forum search.
I have a dual boot with xp and opensuse 11.4. There has been an annoying 'system fan has failed' error message that was dealt with by replacing a fan and installing speedfan and hardware monitor on the windows partition, but my opensuse installation has no such programs running, and I want to keep things cool while I'm running opensuse. Speedfan is a program that tells the fans to turn on and off. Usually according to the temperature that the sensors are reading. The program shows temperatures and fan speeds and allows you to have control.Is there a fan speed/temperature monitoring program for opensuse?
View 7 Replies View Relatedcpu temp in Suse 11.2 is over than 55 C (sysem don not have any task) , but in windows 7 temp is 42 C
in fedora is 46 C I have new fresh install of suse 11.2 my cpu is : AMD Phenom(tm) II X2 550 Processor
what my system working warm ?
I have just recently installed opensuse 11.3 on my computer. I have switched from Ubuntu and have been trying to get things configured similar to what it was. One problem I have encountered is with installing sensors and k10temp, the module needed to monitor my CPU temp. within Linux. I have an AMD sempron and a biostar mcp6p m2+ motherboard. I have installed package "sensors" and have run the sensors-detect and it went through and found k10temp that I would need to load within the kernel for this to work properly. I had this working in Ubuntu, but not sure how to do it in openSuse. I have tried compiling the k10temp source, running modprobe k10temp and received no output, and looked around the conf files, but not sure how to go about doing it?
View 2 Replies View RelatedTemperature monitoring in 11.4 + GNOME 3?
View 7 Replies View RelatedI am looking for a daemon that will set the CPU to lower frequency if its temperature is going too high. I used an application like this in Windows.
View 3 Replies View RelatedWhat is the procedure to install the qalculate plasmoid? I followed the procedure given at the developer's site , [URL] but the install fails at the cmake step.
KDE official site says that it 'd be included by default in KDE 4.4+ but it is not there in kubuntu 10.04
When kubuntu is installed, there is a plasmoid desktop (a kind of transparent window that enables one to create and store links to applications). Nice and convenient.
Alas, the special desktop is easily hidden - permanently... Soon after the installation I inadvertently clicked the X on the plasmoid desktop pop up menu and that hid this special desktop.
In the file manager (Dolphin) I can still see the Desktop with all the links to applications, which are still active (I can run the applications by clicking their icons).
Surely there is a simple way to restore this plasmoid again to the view, but I just do not find how..
If you have kubuntu, you too can have "the fun" of hiding the plasmoid dekstop and then finding how to show it again. Just place you mouse pointer on the plasmoid desktop. That will pop up the menu with X, shift-spanner, turning and resize buttons. If you are brave, try to click X on the pop up menu. Bingo, the plasmoid disappears. Surely fingers more nimble than mine, would find out how to get it back... I can not.
how did you restore the plasmoid to the view.
The Community plasmoid widget thingy is broken on my 64-bit Kubuntu 11.04 system. The last time it worked was sometime in the 10.04 era. I will gratefully receive any suggestions for fixing it.The symptoms are these: It opens with three tabs: Nearby, Friends, Messages. I expect this.There are no entries in the "Nearby" tab. When I log into opendesktop.org w/Firefox, I can see about a dozen people nearby in my town.When I click on the configuration button, it shows me my username and obscured password for opendesktop.org.When I click on the widget again, it there are more tabs! "Friends" and "Messages" are repeated twice each, giving me seven tabs: Nearby, Friends, Messages, Friends, Messages, Friends, Messages.When I click on the configuration button again, the username and password fields are empty.
View 2 Replies View Related1. Is it possible to instead of using the Desktop Folder plasmoid, have a usual Desktop act as a file manager?
2. What is Akondi? There are tons of processes which have Akonadi in their name, and it seems to be using up lots of memory.Can I disable these somehow, or is it safe to do so?
3. Any general tips on how to reduce the amount ram that is used on startup? I am using somewhere around 750MB on startup, which is about double the amount Gnome uses. After a few hours of use, Xorg uses close to 1GB of memory.
4. Whenever I get a notification, they don't delete themselves, so when I click on the (i), I see tons of notifications. Is there a way to get them to delete themselves after they have been shown?
Running kubuntu 11.04x64 w/ xrender and folder-view plasmoid:
I cannot view "open with" for directories on the desktop (but it is visible w/in dolphin file structure) and whenever I try to rename folders on the desktop it crashes and restarts (but the rename is successful and no open windows crash).
This glitch is reproducible under OpenGL and Xrender; had to switch over to xrender after a recent system update that seems to slow my computer to a crawl after a little time and kept it cause it seems much smoother and crisper.
Is there any way to fix these issues or is there an alternative to the folder-view plasmoid to view a folder content on the desktop that is more stable?
In my system, the temperature of the CPU can be known from the file,/sys/bus/acpi/devices/LNXTHERM:00/ thermal_zone/temp . But I have found that not all systems have this file. Is there a generic method to get the temperature. Installing a package for this purpose won't be a solution as I'm building a simple gnome-shell extension. Something that comes along with the kernel would be perfect.
What could be other files that can possibly store temperature information, so that it would work on most atleast if not all? Any help like the file that stores temperature on your particular system only would also be highly appreciated.
Does anybody know wich temperatures a VIA C7 processor can tolerate (max) ?
If i let the server run without the top: ~40C (104 Fahrenheit)
If i let the server run _with_ the top on: ~65C (149 Fahrenheit)
Someone over at silentpcreview.com suggests that the C7 can easely tolerate temperatures of 100C (212 Fahrenheit)
I've recently installed Karmic on my new machine with the following specs;
Asus M4A785TD-V EVO Motherboard
AMD Athlon II X4 620 2.6GHz
Crucial 4GB (2x2GB) DDR3
Coolermaster Elite 330 Case
Western Digital WD5000AAKS 500GB
I'm looking to install some sort of temperature monitoring for my cpu and have had luck using either lm-sensors or acpi. With lm sensors, I've followed the various how to's on the forum and am still coming back with nothing. Trying to add hardware monitoring to panel brings up a 'no sensors found!' error, and x-sensors just starts up with a blank screen.
'sensors' in terminal spits back this -
Code:
lou@lou-quad:~$ sensors
No sensors found!
Make sure you loaded all the kernel drivers you need.
Try sensors-detect to find out which these are.
lou@lou-quad:~$
I've added the relevant lines into etc/modules as per the last question during configuration but still no joy. I've just run 'sensors-detect and had a gander at the output, and I'm wondering if its as simple as no one has written a driver for my mobo yet.
[Code]...
So I just got a MSI 870A-G54 and have been trying to get the CPU temperature on the command line. I ran the following
Code:
sudo apt-get install lm-sensors hddtemp sensors-applet computertemp
And ran sensors-detect
Code:
sudo sensors-detect
# sensors-detect revision 5818 (2010-01-18 17:22:07 +0100)
# System: MSI MS-7599
# Board: MSI 870A-G54 (MS-7599)
[Code].....
So I would like to check out my cpu temperature in function of time. I've followed [URL]...gpu-en-ubuntu/ but unfortunately in the description it was for the old version of Ubuntu and despite having downloaded the program, I simply can't add it in the taskbar. I did in a terminal: sudo apt-get install sensors-applet. Then I installed a few remaining packets from synaptic. Now how do I run the program?
View 6 Replies View RelatedMy nVidia graphics card gets too hot to touch very quickly. Below is current statistics, but it is usually 93C.Is this too hot? Should I speed up the fan? How I do this without risking frying the thing?
View 10 Replies View Related