I have recently updated my ATI drivers to Catalyst 10.10 (ati-driver-installer-10-10-x86.x86_64.run) from the AMD website and I have not been able to get KWin to enable compositing.
I am using:
openSUSE 11.3 x64
KDE 4.5.2
[code]....
I was just curious for the ATI users out there that are running KDE on Fedora 14 have any of you experienced any performance issues? My systems desktop slows to a crawl when Kwin's compositing is enabled, however in KDE 4.4 there were no issues at all. My desktop I built is a rather modest build just for development nothing too High end on the machine, however KDE and it's effects surely should run. I also use xfce so I switched to that and gave up on KDE 4.5
View 14 Replies View RelatedI'm running 11.2 KDE 4.3.5, recently every time I've tried to use the Updater Applet I get this error after choosing to install an update: PackageKit Error internal-error: Installation aborted by user. Then I run YaST to try to manually install the update and get the following error:
Subprocess failed. Error: RPM failed: error: package kwin-4.3.5-0.2.1.i586 is not installed. Really unsure how to fix this but it's only blocking updates/patches, I can download new programs fine.
I'm learning to use openGL api for graphics. but before i begin i want to check whether my system has openGL installed in it. how do i do that?
View 7 Replies View RelatedAny one had any success enabling openGl in fedora 14? I tired and failed; as well, kmod seems to have disappeared and the resolution has dropped from 1920X1080 to 1280X1024, and stock there cannot be adjusted higher only can go down, as well the KRandRTray once clicked, ten to vanish.
View 5 Replies View RelatedI'm experiencing random lockups. There are 2 types.1st time this happened when I enabled Kwin compositing effects. The screen turned black and it froze, the mouse pointer froze. Nothing would move. 5 Minutes later I just hard reset the Laptop. I was afraid something could be corrupted as it was shutdown in a bad way. On boot up Kwin's compositing effects were in place.Randomly working on the laptop, everything will freeze except the mouse pointer. This happens like once in a while though.I have a feeling this has something to do with my Dell Studio 1555 Intel GM4500 MHD graphics.
View 5 Replies View Relatedanyone has experiment this? If I install KDE 4.5 on a PC without 3D support kwin crash, if I add a 3D capable video card it works O.o VampirD
Microsoft Windows is like air conditioning
Stops working when you open a window.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.15 (GNU/Linux)
Comment: Using GnuPG with SUSE - http://enigmail.mozdev.org/
[Code]...
I am trying to find out where in the system are the files that store information on the following: 1. keyboard shortcuts, and 2. which applications and which windows were open before the session ended. Regarding (2): I really like the fact that when I log back in, OpenSuse pops up all the windows that I had open before I last logged out. I know that this information must be stored somewhere. And most probably in my home folder. But I can't seem to find it in ~/.kde or ~/.kde4 Regarding (1): Again, I really like the Mac-OS style behavior that one gets with Ctrl+F9/F10. But sometimes I invoke it inadvertently when - as far as I can remember - my fingers were on the trackpad only. I have not been able to figure out how I do it. But I would like to be able to do it consciously - without pressing Ctrl+F9/F10. Does anyone know what could be happening. i have an HP Pavilion dv4 laptop with an otherwise annoyingly sensitive track pad.
View 3 Replies View RelatedI am using openSUSE 11.2 x64 with KDE 4.3.5.I am experiencing sudden, sporadic drops in performance due to the kwin and Xorg processes suddenly consuming large amounts of CPU for a few minutes (maybe 30-40% each) before dropping back to normal (1-3% each). I am seeing this using top.
View 8 Replies View RelatedIs there a way to disable window drag from within the window? I mean, I want the window to be movable only from the title bar. But now even if you drag the window from the content, the drag action is fired.
View 2 Replies View RelatedI have installed Gnome to KDE and above mentioned problem discovered. Kontact was over the whole screen and rotation of display was to the left and right not above and down. After uninstalling compiz the mentioned problems are away.
View 4 Replies View RelatedI have installed torcs (using sbopkg) and the dependencies plib, OpenAL, and freealut. On running it I get
Quote:
GLUT: Fatal Error in torcs-bin: failed to create OpenGL rendering context.
I am not sure if it is relevant but this is xorg.conf
Quote:
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder62) Tue Jul 28 19:48:57 PDT 2009
Section "ServerLayout"
[code]....
I have a clean new installation of openSUSE 11.4, but I can't enable the desktop effects in it. My video is nVidia GTS250 and I haven't any issues with enabling desktop effects in the past.
Code:
ilian@linux-home:~> su
Password:
linux-home:/home/ilian # cat /etc/SuSE-release
openSUSE 11.4 (x86_64)
[Code]....
suse 11.4 tumbleweed, kde 4.6.5, on laptop dell latitude E6510, with intel i7, 4Mb ram, NVIDIA 3100 Yesterday all effects was working well, no update and no changes, and today I dont know why but plasma crashed at startup, after a couple of try I login on gnome and renamed /home/.kde4 folder, now kde starts but when I try to enable some effects, cube, wabbling windows and others, kwin message appear sayng that effects cannot be enabled.
View 3 Replies View RelatedAccidentally I pressed alt-shift-f11 (instead of f12) and kde notified me that I switched the window manager layout to spiral: now my panel is not transparent anymore (obviously, with effects enabled). I have a standard desktop install of opensuse 11.4, with the kde themes I found out of the box. How can I restore the previous situation? If I press alt-shift-f11 nothing changes, except enabling or disablin the tiling (was it activated by default?).
View 6 Replies View RelatedI am running KDE 4.4.4 Stable from the openSuSE Repository for KDE 4.4.4 stable as included with 11.3.At first after initial installation Kontact worked and I could access Email, Address Book, Calendar, etc. from the icon bar. Now, Kontact starts, opens the Summary page, but no selections respond, only the Kwin responds to terminate the application, it just seems to hang and has to be killed to terminate. Anyone have similar issue or ideas on what may be causing it? I can start KMail, Kaddressbook, as separate applications and all respond as normal.
View 4 Replies View RelatedThis is probably already on these forums, but I recently re-installed suse 11.3 and had the desktop effects working fine with the desktop cube animation and everything. But not the case this time...I resume compositing, and try my desktop effect shortcuts, but nothing happens and it comes up saying for me to press Alt+Shift+F12 to resume the compositing again. I do that, but still nothing, and I even re-apply the desktopct settings completely and restart the computer and it comes up saying that none of them were activated or something in the notifications pop-up on the bottom right of the screen. I thought I downloaded the right files (OpenGL??) from the repositories along with basically anything I thought would make it work.
View 3 Replies View RelatedI have been going crazy for a few days trying to enable compiz on my tc1100. I have a GeForge 420 legacy card and I compiled the proprietary NVIDIA driver. I realize that this is an old card. So perhaps that is why NVIDIA compositing is not enabled by default. If I go to Desktop settings and try to enable 3D effects, it tells me that compositing is not enabled. So I figured I best go with xlg. I installed all that is necessary for compiz-fusion. However, the command glx is not recognised. I also cannot find a package called xlg. Only patterns-openSUSE-xlg. Shouldn t there be a package for xlg? How do I enable compositing??
This is the contents of my xorg.conf
Code:
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder63) Tue Jul 13 13:31:50 PDT 2010
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection .....
I just upgraded from FC8 (32-bit) to FC11 (64-bit). In doing so, I backed up my entire World of Warcraft folder so I could try to avoid having to download and install it all over again. However, I've now reinstalled wine (64-bit now), and the nvidia drivers from the rpmfusion repos (also 64-bit), and when I try to start WoW, it says it cannot load OpenGL. I'm wondering if anyone knows what's up, and if there's a solution that doesn't involve reinstalling WoW.
View 7 Replies View RelatedConfigure desktop (Desktop - System Settings) --> Desktop
Message indicates:
Compositing is not supported on your system.
Required X extensions (XComposite and XDamage) are not available.
I can't find XComposite or XDamage as a package to install with Software Management. code...
I am receiving the following error when trying to enable Compositing in Desktop Settings for KDE4 in openSuse 11.3-Xen
Code:
Error: Compositing is not supported on your system. Required X extensions (XComposite and XDamage) are not available. I want to have desktop effects enabled but can't seem to figure out how to get this done. "Advanced" Tab is greyed out. "Enable desktop effects" is greyed out.
[Code]...
This worked to get X up and running in the Xen kernel. However, I'm pulling what hair I have left trying to figure out how to enable compositing in Xen. The entire motivation for my upgrade was this one feature (amongst some other things).
Please show me where I'm going wrong. I hope this is not a "live with it" type of scenario due to my using Xen.
Desktop effects are not enabled and in system settings there is the following message "Desktop effects are not available on this system due to the following technical issues: Required X extensions (XComposite and XDamage) are not available."
The nouveau driver is installed. Peering at /etc/X11/xorg.conf I get three pieces of information
- driver ="nv"
- composite ="off"
- threats of war, famine, death and the other one if I edit the file by hand
I tried Xorg -configure and tested the result as it prompts, but that file seemed to contain errors
I can't find anything in YaST to edit the file
- is "nv" correct?
Apart from backing up xorg.conf (which I have) and firing up a text editor to change "off" to "on" does anyone have any more intelligent suggestions?
I've set up a basic 11.4 server/workstation at my home and am having trouble post-nvidia install when it comes to dual-monitors and compositing. Now, I've looked at many posts here and have not found an answer, since most of the answers are obviously for single-monitor setups. The reason I think this is that all the solutions render my second monitor useless (ie, blackscreen/does not function).
Background: I've set up the nvidia 275 drivers via blacklisting neauveau(sorry if I have misspelled) and installing the package [nvidia drivers] from the nvidia website. Everything works great, the login screen comes up on the correct monitor! (I'm quite excited about this, for Ubuntu it took a startup script which, for some reason, rendered full-screen quakelive across two screens instead of one. It was win-lose).
The error I'm getting in the configuration utility for KDE is that compositing is not available because the extensions XComposite and XDamage are not available. These are available and effects work fine if I disable my second monitor. How can I enable for two?
Here's my xorg.conf. I've tried removing this and restarting KDE without and this disables my second monitor, but allows for compositing as mentioned before.
Code:
I am having issues with 3d I am trying to start up a game called auteria but it displays this error "Could not find a compatible opengl display resolution. Please check your driver configuration. (Error: Couldn't find a matching GLX visual)" I am on ubuntu 10.10 could anybody give me a solution on how to fix this issue?
View 5 Replies View RelatedCode:
Failed to activate desktop effects using the given options. Settings will be reverted to their previous values.
Check your X configuaration.
You may also consider changing advanced options, especially changing the composting type. I cannot use OpenGL, hence my Compiz is useless.. I have ATI 5850s
I have got arch Linux dual booting with Win XP on my laptop. I have been getting a filesystem check error since yesterday and am unable to start Arch. Upon googling and searching the arch fora, I came upon some advice which I tried which has not worked yet. Hence the new post.Basically, I was attempting to print something off and accidentally chose a printer that was not connected to my laptop. After half a minute or so, it repeatedly started giving me notifications that the printer was not connected...in excess of 200 messages that the printer was not working which continued to pop up despite me canceling the print job. The whole system got really sluggish (for the first time in the last year) and I had to restart the laptop upon which the boot messages appear. It gets to the point where its loading the various filesystems. It mounts root and says it fine.
I tried fsck which tells me that home and boot are still mounted.So I booted up using an Ubuntu Live CD and checked and repaired each file system which it successfully did. Upon rebooting into Arch, I am getting the same message.I have not installed anything new and had upgraded the whole system a few days before the problem started.
I recently upgraded from 11.2 to 11.3. I had to manually install nVidia drivers to get the desktop working correctly (compiz was enabled), now the system runs fine except for cairo-dock which doesn't start on KDE boot.Running it from console and choosing Yes when asked for using OpenGL, it returns an error
djechelon@MONSTR:~> cairo-dock
============================================================================
Cairo-Dock version: 2.1.3-7
Compiled date: Mar 18 2010 20:45:24
Running with OpenGL: 1
============================================================================
cairo-dock: symbol lookup error: /usr/lib64/libgtkglext-x11-1.0.so.0: undefined symbol: GTK_WIDGET_NO_WINDOW
After upgrade to 11.3 I performed a full distro upgrade via YaST by updating all the packages if a newer version was available, so I'm using the latest version of all the packages on my system. I searched with YaST for the package containing that libgtkglext and forced its upgrade in order to reinstall it. No fix.Here is my repository list
Code:
[code]....
Last night I was playing around with Desktop Effects and set the composting engine to Xrender, it was openGL. And things started to slow down tremendously. There is now lag on Alt+F1, lag when mousing over hidden taskbar, lag when moving windows, etc. I was trying to get rid of a trail of images when moving windows around. I created more problems. Things got even better when I tried to change back to openGL:
"Failed to activate desktop effects using the given configuration options. Setting will be reverted back to previous values. Check your X configuration. You may also consider changing advancde options, especially changing the composting type." The same thing happens when I click on "Default", the default options disable desktop effects.
My system from and after that at startup as it was doing a file system check I got this:
Checking file systems ... fsck 1.41.3 (12-Oct-2008)
/dev/sda1: clean, 30/124496 files 34735/248976 blocks
/dev/hda1 contains a file system with errors, check forced.
[code]...
I've been a long time ubuntu/debian user, and I decided to give fedora a try. Durng my first set of updates after install, the updater (gpk) seemed to stall on an 'updating libraries' step (it lasted for over 12 hours). Anyway, I force quit the program, restarted the system, and all appears fine. What I wanted to ask is this; is there some way to check the yum log to see if the update completed successfully, or an equivalent to 'apt-get -f install' to fix any broken/partially installed packages.
View 3 Replies View Related