Configure desktop (Desktop - System Settings) --> Desktop
Message indicates:
Compositing is not supported on your system.
Required X extensions (XComposite and XDamage) are not available.
I can't find XComposite or XDamage as a package to install with Software Management. code...
I have been going crazy for a few days trying to enable compiz on my tc1100. I have a GeForge 420 legacy card and I compiled the proprietary NVIDIA driver. I realize that this is an old card. So perhaps that is why NVIDIA compositing is not enabled by default. If I go to Desktop settings and try to enable 3D effects, it tells me that compositing is not enabled. So I figured I best go with xlg. I installed all that is necessary for compiz-fusion. However, the command glx is not recognised. I also cannot find a package called xlg. Only patterns-openSUSE-xlg. Shouldn t there be a package for xlg? How do I enable compositing??
This is the contents of my xorg.conf
Code:
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder63) Tue Jul 13 13:31:50 PDT 2010
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection .....
I cannot find workspace in kde4 under 11.4. I try to add from taskbar option, but find nothing.
View 3 Replies View RelatedJust got a VisionTek ATI Radeon HD2600Pro, which my Fedora 12 64-bit system seems to have no problem recognizing natively (though it is peculiar that it shows up in lspci as an a 'HD3600' instead of 2600), so things seemed fine ... til I tried to start X. To be thorough: I went from an nVidia Quadro NVS 285 in the system using drivers from rpmfusion, to this card in hopes of getting better graphics and compositing support. So I tried uninstalling the nVidia drivers and kmods, blacklisting radeon and radeonhd mods, installing the stock ATI driver straight from the ATI/AMD site (which included header compilation), and starting X ... no go. Then removed that, installed the OpenDrivers stuff ... still no good. Ended up removing all Xorg configuration (literally removing xorg.conf) and starting X with bare bones. And now X will indeed start up and go into my desktop environment (KDE), but as soon as I open more than a single application window, the system becomes virtually unusable, and compositing is completely out of the question.
Any advice for drivers/config/setup to get this working? Or do I need to go back to my crappy 128MB NVS card?
The title pretty much speaks for itself. All options in Desktop Effects are greyed out and a docking application called Docky asks me to enabled composite effects for it to function properly.
I haven't made any driver installs or anything as I have a knack for breaking video configurations in Linux. Also this might have to do with the problem, I have no xorg.conf file for some reason. I did some searching around but that pointed me into installing packages that I already have :S.
This is probably already on these forums, but I recently re-installed suse 11.3 and had the desktop effects working fine with the desktop cube animation and everything. But not the case this time...I resume compositing, and try my desktop effect shortcuts, but nothing happens and it comes up saying for me to press Alt+Shift+F12 to resume the compositing again. I do that, but still nothing, and I even re-apply the desktopct settings completely and restart the computer and it comes up saying that none of them were activated or something in the notifications pop-up on the bottom right of the screen. I thought I downloaded the right files (OpenGL??) from the repositories along with basically anything I thought would make it work.
View 3 Replies View RelatedI am receiving the following error when trying to enable Compositing in Desktop Settings for KDE4 in openSuse 11.3-Xen
Code:
Error: Compositing is not supported on your system. Required X extensions (XComposite and XDamage) are not available. I want to have desktop effects enabled but can't seem to figure out how to get this done. "Advanced" Tab is greyed out. "Enable desktop effects" is greyed out.
[Code]...
This worked to get X up and running in the Xen kernel. However, I'm pulling what hair I have left trying to figure out how to enable compositing in Xen. The entire motivation for my upgrade was this one feature (amongst some other things).
Please show me where I'm going wrong. I hope this is not a "live with it" type of scenario due to my using Xen.
Desktop effects are not enabled and in system settings there is the following message "Desktop effects are not available on this system due to the following technical issues: Required X extensions (XComposite and XDamage) are not available."
The nouveau driver is installed. Peering at /etc/X11/xorg.conf I get three pieces of information
- driver ="nv"
- composite ="off"
- threats of war, famine, death and the other one if I edit the file by hand
I tried Xorg -configure and tested the result as it prompts, but that file seemed to contain errors
I can't find anything in YaST to edit the file
- is "nv" correct?
Apart from backing up xorg.conf (which I have) and firing up a text editor to change "off" to "on" does anyone have any more intelligent suggestions?
I have recently updated my ATI drivers to Catalyst 10.10 (ati-driver-installer-10-10-x86.x86_64.run) from the AMD website and I have not been able to get KWin to enable compositing.
I am using:
openSUSE 11.3 x64
KDE 4.5.2
[code]....
I've set up a basic 11.4 server/workstation at my home and am having trouble post-nvidia install when it comes to dual-monitors and compositing. Now, I've looked at many posts here and have not found an answer, since most of the answers are obviously for single-monitor setups. The reason I think this is that all the solutions render my second monitor useless (ie, blackscreen/does not function).
Background: I've set up the nvidia 275 drivers via blacklisting neauveau(sorry if I have misspelled) and installing the package [nvidia drivers] from the nvidia website. Everything works great, the login screen comes up on the correct monitor! (I'm quite excited about this, for Ubuntu it took a startup script which, for some reason, rendered full-screen quakelive across two screens instead of one. It was win-lose).
The error I'm getting in the configuration utility for KDE is that compositing is not available because the extensions XComposite and XDamage are not available. These are available and effects work fine if I disable my second monitor. How can I enable for two?
Here's my xorg.conf. I've tried removing this and restarting KDE without and this disables my second monitor, but allows for compositing as mentioned before.
Code:
i am using FC11. I have installed GD and it is showing in RPM list. Copied libgd.so in php modules and made an entry in php.ini. php version is :
php -version
PHP Warning: PHP Startup: Invalid library (maybe not a PHP library) 'libgd.so' in Unknown on line 0
PHP 5.2.9 (cli) (built: Apr 15 2009 09:30:33)
Copyright (c) 1997-2009 The PHP Group
Zend Engine v2.2.0, Copyright (c) 1998-2009 Zend Technologies
[code]....
I am using RHEL 5. I have enabled rpmfusion, epel and rpmforge yum repositories and installed Audacious and dependecies. But I could not find any mp3 playback plugins. Installed Audacious plays ogg format but doesnt play mp3. How can i make Audacious play mp3 format ?
View 8 Replies View RelatedI don't see floppy drive in Nautilus. How to enable FDD support in Fedora?
View 5 Replies View RelatedI followed this tutorial [URL] to enable my TRIM support and now my fstab looks like this:
Quote:
# /etc/fstab: static file system information.
#
# Use 'blkid -o value -s UUID' to print the universally unique identifier
# for a device; this may be used with UUID= as a more robust way to name
# devices that works even if disks are added and removed. See fstab(5).
[Code].....
but when I follow the second half of the tutorial http://lightrush.ndoytchev.com/rando...bledandworking to check and make sure it's working I don't get all zeros like I'm supposed. I tried waiting a while like I saw in another tutorial as well and check it again.. Still random numbers and no zeros.
I need to use my TV as a monitor via DVI.
Using Meerkat 64. Here's some specs:
Code:
Because the Physical ID is 2.1, I'm fairly certain this is the DVI port. Do I need a driver for this to work?
first, sorry for my bad english, I am german I have a problem enabling IOMMU on my MSI 970A-G45 mainboard. I need the IOMMU support for PCI passthrough in KVM ( I need my DVB pci cards in the virtual machine).
I have installed Ubuntu server 11.04 and enabled IOMMU in bios. The first strange thing is, that when iommu is enabled in the bios i cant access network or USB devices in ubuntu. Only when its disabled in bios.
Well, i tried the tutorial from here: http://www.linux-kvm.org/page/How_to...th_VT-d_in_KVM and compiled a new kernel with "Support for DMA Remapping Devices", "Enable DMA Remapping Devices" and "PCI Stub driver" enabled and installed it (based on description in wiki)
[Code]...
How to install or enable freetype support in php version 5.2.2. I already installed gd support in php. I using RHEL4. I not able reinstall or recompile in my server.
View 1 Replies View RelatedHow to enable multiple language support in centos?
understand that we need to install scim (smart common input method)
but if I install and choose only one language, what should I do after installation
from http://www.centos.org/docs/4/4.5/rhel-ig-x8664-multi-en-4/s1-langsupport.html
I guess right now after i install scim, I'll still not able to view other language (Asian Language) web sites
i'm using pidgin 2.7.1
how do i enable video support for pidgin?, or is it on by default?? because when i click a chat room from yahoo's list of rooms(that say people have web-cams)i don't see any options to view any of the webcams.
trying to understand the two underlined sentences below I got to ask Step by step. I created a new group called usb. I inserted a usb printer and scanner. I tried to find the file usbfs and there is where get stuck already. I only can find a folder with that name. The sentence (3 -) makes almost no sense to me.
a) modify file /etc/fstab clear open terminal, go to etc, su gedit fstab
b) inserting a line yes I understand that!
c) the right path and the number corresponding the "usb" group :
none /sys/bus/usb/drivers usbfs devgid=503,devmode=664 0 0
2 - locate file usbfs: in my case is /sys/bus/usb/drivers (I suggest to find the file with a usb device inserted;
3 - modify file /etc/fstab inserting a line containing the right path and the number corresponding the "usb" group :
none /sys/bus/usb/drivers usbfs devgid=503,devmode=664 0 0
I think I have finally arrived at an insolvable equation:
Chromium v.7 + Ubuntu 10.04 + Sun Java 6 + Webcam + Facebook + Flash 10 = non-functional
All of those items listed above are potential points of failure in this situation, and any help narrowing them down would be fantastic. I am simply trying to enable webcame support directly through Facebooks website.
Forum searches and the usual googling turn up few posts related to this specific equation. Two of the major suggestions include:
1) Installing the Sun (I refuse to say oracle sob)-provided Java implementation instead of the OpenJDK normally installed in Ubuntu. And yes, after installing it, I did update all my default supports to use the sun commands over the openjdk.
2) Somehow enabling Facebook as a permitted site to access my webcam using Flash settings.
I have not been able to explore option 2 because I cannot find a way to adjust the Flash settings in chromium 7.
I have tried many ways to enable vdpau support in my machine but for no avail. A member here helped me very much but I couldn't manage to succeed. My system has Ubuntu 9.10 64-bit, Nvidia 8500GT 512mb, Intel Core 2 duo. I have installed Nvidia driver version 195 currently available from their site. I tried compiling mplayer with vdpau support from various tutorials thread here around in Ubuntu forums.
Is there anyone in this forum with Ubuntu 9.10 64 bit with the same other system requirements as mine who have successfully managed to make the VDPAU work?
I have ubuntu jaunty 9.04 installed in my system(thats my only OS.. no dual boot). When I tried to install hplip to enable hp printer driver, I understood that 9.04 is obsolete and no more support for it. I want to upgrade now. Update manager shows '10.04' for uogradation but it seems I cannot jump from 9.04 to 10.04 without getting into 9.10.
View 2 Replies View RelatedI'm experiencing a wierd bug. Been having it for some time now. I haven't posted about it before since its only been annoying, but not really setting me back. And I have trouble defining and explaining the bug. Today it crossed the line into actual annoyance.
The bug occurs when I'm writing, using the keyboard on my laptop. Both when I write in browsers, like when writing this post, and when I write in openoffice. So its not limited to one program. In webbrowsers what happens is that all of a sudden the browser loads the previous page in the tab. Like I told it to go one step back. In OpenOffice something similar happens. The curser jumps up in the document.
I used to have this bug when touchpad-tapping was enabled. I have a habit of drumming my thumbs on the touchpad when typing. Therefore I've disabled tapping on the touchpad. The bug is reocurring, however I have not found a way to reproduce it. It might be a key combination I accidentally hit when typing away, but I'm not sure.
I searched every which way I could to find this out, but to no avail. Can anyone address this query?
View 9 Replies View RelatedDon't know what happens, but I cannot update to KDE4.5 Neither zypper nor yast seem to see what is in that repo, even with higher priority.
[Code]....
The restricted format FAQ sticky (Restricted formats - openSUSE) mentions a package called "kde4-k3b", but this doesn't show up in my listing. Which repository does kde4-k3b reside in? 11.2 KDE
View 7 Replies View Relatedif the original 11.2 iso will be reworked to include KDE4.4 SC.
View 3 Replies View RelatedI've been experiencing a strange problem with Plasma locking up. Running system monitor it shows the KDE4 process using 20% CPU time, and Plasma around 10-15%. This seems way too much since on my six year old Laptop the cpu load of both processes is barely noticeable. My Laptop is an old single core 3000+ AMD Athlon 64, while my Desktop has a Quad core Xeon 2.33Ghz chip, so the fact that the KDE4/Plasma system load is many times higher than on the Laptop, indicates something is wrong.
I'm not sure what else to look for troubleshooting wise, any suggestions? *Actually, thinking about it, the KDE4 process is timing out one CPU core, which indicates to me something is really not right.
I am hitting a wall here - with the new 4.4 installed and working well, the one thing that is killing me is not being able to read the active taskbar item or the plasma peanut menu (see screenshot. You can see that the firefox and gimp are "active" and too dark to read, while kwrite is inactive and readable.They are BOTH too dark, and I cannot seem to find the option that controls those color elements.
View 9 Replies View Related