OpenSUSE Hardware :: Kde Unvoluntarily Set Kwin Layout To Spiral
May 6, 2011
Accidentally I pressed alt-shift-f11 (instead of f12) and kde notified me that I switched the window manager layout to spiral: now my panel is not transparent anymore (obviously, with effects enabled). I have a standard desktop install of opensuse 11.4, with the kde themes I found out of the box. How can I restore the previous situation? If I press alt-shift-f11 nothing changes, except enabling or disablin the tiling (was it activated by default?).
With my other computermore or less the same.Its a desktop PC with an spanisch keyboard. But i thinck i picked German keyboard during installation and now it starts always with german with some sort of 5 secs delay when setting it. I have to pick spanisch and i always delete the german layout, but after some time having it running, it resets to the previusly deleted german layout.
I'm experiencing random lockups. There are 2 types.1st time this happened when I enabled Kwin compositing effects. The screen turned black and it froze, the mouse pointer froze. Nothing would move. 5 Minutes later I just hard reset the Laptop. I was afraid something could be corrupted as it was shutdown in a bad way. On boot up Kwin's compositing effects were in place.Randomly working on the laptop, everything will freeze except the mouse pointer. This happens like once in a while though.I have a feeling this has something to do with my Dell Studio 1555 Intel GM4500 MHD graphics.
anyone has experiment this? If I install KDE 4.5 on a PC without 3D support kwin crash, if I add a 3D capable video card it works O.o VampirD
Microsoft Windows is like air conditioning Stops working when you open a window. -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.15 (GNU/Linux) Comment: Using GnuPG with SUSE - http://enigmail.mozdev.org/
I am trying to find out where in the system are the files that store information on the following: 1. keyboard shortcuts, and 2. which applications and which windows were open before the session ended. Regarding (2): I really like the fact that when I log back in, OpenSuse pops up all the windows that I had open before I last logged out. I know that this information must be stored somewhere. And most probably in my home folder. But I can't seem to find it in ~/.kde or ~/.kde4 Regarding (1): Again, I really like the Mac-OS style behavior that one gets with Ctrl+F9/F10. But sometimes I invoke it inadvertently when - as far as I can remember - my fingers were on the trackpad only. I have not been able to figure out how I do it. But I would like to be able to do it consciously - without pressing Ctrl+F9/F10. Does anyone know what could be happening. i have an HP Pavilion dv4 laptop with an otherwise annoyingly sensitive track pad.
I am using openSUSE 11.2 x64 with KDE 4.3.5.I am experiencing sudden, sporadic drops in performance due to the kwin and Xorg processes suddenly consuming large amounts of CPU for a few minutes (maybe 30-40% each) before dropping back to normal (1-3% each). I am seeing this using top.
Is there a way to disable window drag from within the window? I mean, I want the window to be movable only from the title bar. But now even if you drag the window from the content, the drag action is fired.
I have installed Gnome to KDE and above mentioned problem discovered. Kontact was over the whole screen and rotation of display was to the left and right not above and down. After uninstalling compiz the mentioned problems are away.
I have recently updated my ATI drivers to Catalyst 10.10 (ati-driver-installer-10-10-x86.x86_64.run) from the AMD website and I have not been able to get KWin to enable compositing.
I have a clean new installation of openSUSE 11.4, but I can't enable the desktop effects in it. My video is nVidia GTS250 and I haven't any issues with enabling desktop effects in the past.
suse 11.4 tumbleweed, kde 4.6.5, on laptop dell latitude E6510, with intel i7, 4Mb ram, NVIDIA 3100 Yesterday all effects was working well, no update and no changes, and today I dont know why but plasma crashed at startup, after a couple of try I login on gnome and renamed /home/.kde4 folder, now kde starts but when I try to enable some effects, cube, wabbling windows and others, kwin message appear sayng that effects cannot be enabled.
I am running KDE 4.4.4 Stable from the openSuSE Repository for KDE 4.4.4 stable as included with 11.3.At first after initial installation Kontact worked and I could access Email, Address Book, Calendar, etc. from the icon bar. Now, Kontact starts, opens the Summary page, but no selections respond, only the Kwin responds to terminate the application, it just seems to hang and has to be killed to terminate. Anyone have similar issue or ideas on what may be causing it? I can start KMail, Kaddressbook, as separate applications and all respond as normal.
I'm running 11.2 KDE 4.3.5, recently every time I've tried to use the Updater Applet I get this error after choosing to install an update: PackageKit Error internal-error: Installation aborted by user. Then I run YaST to try to manually install the update and get the following error:
Subprocess failed. Error: RPM failed: error: package kwin-4.3.5-0.2.1.i586 is not installed. Really unsure how to fix this but it's only blocking updates/patches, I can download new programs fine.
Running Ubuntu Lucid Lynx, GNOME 2.3Keyboard Preferences utilityAdding any Spanish language keyboard layout makes my Alt_R not work in ANY layout! I see that it changes Alt_R to "Iso_L..." for all/both layouts, including USA layout. When I click "Reset to Defaults" it's fine again, USA layout shows Alt_R again. I've tried all the variants of the Latin American layout and the Spain layout and they all do the same thing.What is "ISO_L..." and what's going on?i DESPERATELY need my Alt_R to work!
having problems with my keyboard layout since upgrade from F11 to F12. When I reboot and login into gnome I have to switch back to my layout as it has been set to USA default layout.
I have setup different identities in Kmail to deal with multiple gmail accounts so I have a different set of inbox, sent mail and draft folder for each account.In the message layout, I have chosen to display the columns - subject,sender/receiver and date. For one of my email accounts, kmail does the job perfectly. The inbox foler shows subject, sender and date, whereas the sent-mail folder shows subject, receiver and date. However, this order is not maintained for my other email accounts. The inbox folders show subject, sender and date(which is correct); the sent-mail folder shows subject, sender and date - instead of subject, receiver and date which is what should be displayed.
I use 2 keyboard layouts. But when I change setting from the YaST interface in KDE, setting save only for the short time (may be some hours). Then I can't switch between layouts and have to use YaST again. What is it?
I'm using Gnome and OpenSUSE 11.2, and my keyboard layout changes USA from Finland every time I reboot my pc. I have to delete USA-layout from keyboard preferences every time after reboot.
I have a UK keyboard, so I selected the United Kingdom layout on installation of OpenSUSE 11.3.However, something keeps automatically adding the USA layout, and switching to it ! How can I prevent this annoying and intrusive behaviour ? Deleting the USA layout is not enough, it seems. It just restores it again.
Having selected 'Landscape', when printing using 'File|Print' in KWrite, the text is presented in landscape but formatted to a size of approximately 105mm x 590mm (bottom half of a landscape page and stretched to twice the width, printing only the left hand side). I have a similar issue with some other programs too, but not Open Office.Having configured 'cupsd.conf' to log in debug mode it would seem that the problem I'm getting may be to do with applications that output in 'application/pdf' format, because in the CUPS log for Job 57 line 479 seems to indicate that KWrite has output a PDF file:
Code:[Job 57] File of type application/pdf queued by "root". Then at line 490 there's a line that seems to indicate no landscape, even though this was selected through the user interface of KWrite (and works in Open Office)!:Code:[Job 57] argv[5]="document-name=4b69b8710002c media=A4 nolandscape job-uuid=urn:uuid:5c6fae2f-ad2f-3364-5f04-bb5500d1eabc" I would have attached the various 'log' and 'conf' files but I'm new to this and I just can't find a way to get attachments enabled for my login!I've spent hours on this, if anyone can give me any pointers I would be most grateful, however I am no Linux system administrator I'm afraid.Current system: openSUSE 11.2 x64, Kernel 2.6.31.8, CUPS 1.3.11, gutenprint 5.2.4, KWrite 4.3.1 release 6, KDE 4.3.1.1Old system (that worked with this printer): openSUSE 11.1 x32, gutenprint 5.2.2
I recently switched my openSUSE 11.1 install from KDE 3 to KDE 4.4 via the one-click-install from [URL]... I was trying to add a German keyboard layout to the default US layout. But as soon as I enable keyboard layouts (via Configure Desktop-> Language & Regional -> Keyboard Layout -> Enable keyboard layouts), the default layout gets messed up (arrow, pos1, end keys etc. no longer work). I'm running openSUSE 11.1 on a Lenovo Thinkpad T61. Several keyboard layouts worked fine with KDE 3. Could it be that some KDE 3 settings are interfering with the KDE 4 settings?
I've been using using Ubuntu and Arch with gnome for ages, but after the whole gnome3 and unity hubub, I decided to go with kde and openSUSE. and I'm completely loving it. However, I have one problem Ubuntu (gnome) has the option to choose the Faroese keyboard layout, but in openSUSE with kde, it's not an option. Now I really need to be able to write a lot, so I need the regular Faroese layout, otherwise I'm missing the letter "ð". openSUSE should really implement Faroese into the keyboard layout options
I have a problem with keyboard layout and only happens with KDE applications. If I type at Firefox or Eclipse everything works fine. I already tried few stuffs like this How to enable Keyboard Layout on OpenSuSE 11.4 (Updated) but no luck so far. When I type ' + c in KDE applications I got:
ć
I was hoping ç
At Yast2 I tried: Portuguese (Brazil -- US accents) and others. Unfortunately I didnt found anything close to US - intl, US with deadkeys, etc
I just switched to xorg version wich has dropped HAL support. I was wondering how i can change keyboard layout as the default isn't correct. Should I add an udev rule, create a file in xorg.conf.d or can I enter the right layout anywhere in an existing config file xorg do reads that i'm missing?
