Fedora :: Systems Desktop Slows To A Crawl When Kwin's Compositing Is Enabled
Jan 10, 2011
I was just curious for the ATI users out there that are running KDE on Fedora 14 have any of you experienced any performance issues? My systems desktop slows to a crawl when Kwin's compositing is enabled, however in KDE 4.4 there were no issues at all. My desktop I built is a rather modest build just for development nothing too High end on the machine, however KDE and it's effects surely should run. I also use xfce so I switched to that and gave up on KDE 4.5
View 14 Replies
ADVERTISEMENT
Aug 4, 2010
I started unarchiving a RAR file that this several gigabytes big. The computer is now going really slow, it's almost frozen. Sometimes I can move the mouse a little, but that's it. The unarchiving process seems to have halted, so now all I can do is restart the system. I don't think I can unarchive this file in Linux.
View 5 Replies
View Related
Jun 5, 2011
I noticed that sometimes my Linux server will randomly start to lag really badly, to the point where even a http request takes forever. It is an Intel Core2Quad with 8GB of ram running FC9. This is my "Everything" server so it does file, email, DNS, web (for local stuff only), VMs and so on. There are about 5-6 VMs running on it at any given time. I manage it through a VNC session and have some SSH consoles within that session. This way if I reboot my PC I don't lose all my SSH consoles. If I need to SSH to any server I do it from there. I treat it kinda like a terminal server to some extent.
When this slowdown happens, top is not really useful because I also do F@H so that will always be to the top, but it's low priority. The VMs are also always near the top. This does not change whether it's slow or not, so when it's slow, I have nothing to go by on how to troubleshoot. The load does seem to skyrocket though. Right now it's doing the slowdown thing and it's at 8.09. Normally it's at around 3 which imo is good as it it's under 4. I have 4 cores so anything more than 4 means it's queuing. At least that's how I understand it. This is the output of top:
Code:
[root@borg ~]#
[root@borg ~]#
[code]....
View 9 Replies
View Related
Oct 28, 2010
I have recently updated my ATI drivers to Catalyst 10.10 (ati-driver-installer-10-10-x86.x86_64.run) from the AMD website and I have not been able to get KWin to enable compositing.
I am using:
openSUSE 11.3 x64
KDE 4.5.2
[code]....
View 1 Replies
View Related
Jul 17, 2010
Whenever I have the composite manager setting ticked my videos get strange lines when I play them but when compositing is not enabled the videos are fine.
View 3 Replies
View Related
Mar 8, 2011
Acer 5742 laptop with Intel HD Graphics.In Xubuntu 10.10 whenever I have display compositing enabled, flash becomes slightly (but noticably and annoyingly) choppy. With hardware acceleration enabled, there's a horizontal line about an inch from the bottom of the screen that is fairly distorted, and with hardware acceleration disabled, it affects the whole screen but to a lesser degree.
View 3 Replies
View Related
Jul 18, 2011
I have a clean new installation of openSUSE 11.4, but I can't enable the desktop effects in it. My video is nVidia GTS250 and I haven't any issues with enabling desktop effects in the past.
Code:
ilian@linux-home:~> su
Password:
linux-home:/home/ilian # cat /etc/SuSE-release
openSUSE 11.4 (x86_64)
[Code]....
View 9 Replies
View Related
Jul 20, 2011
suse 11.4 tumbleweed, kde 4.6.5, on laptop dell latitude E6510, with intel i7, 4Mb ram, NVIDIA 3100 Yesterday all effects was working well, no update and no changes, and today I dont know why but plasma crashed at startup, after a couple of try I login on gnome and renamed /home/.kde4 folder, now kde starts but when I try to enable some effects, cube, wabbling windows and others, kwin message appear sayng that effects cannot be enabled.
View 3 Replies
View Related
May 11, 2010
I am new to linux and ubuntu, but it seems like this bloody bug has not been solved for years. There are many threads as i googled, back from years 2007, 2008... After lucid, i was hoping something (i do not know, if i should have) and googled recently. Found this:[URL].. That xserver thing (which i have tried before for 9.10) does not work!
What am i going to do about this? I cannot even use edge flipping because of that bloody resizing/maximizing problem. I cannot use stuff like docky. No compositing!
Until when should i wait? Is there a possibility of this bug being solved? Should i give my notebook to some windows user and get an nvidia one?
View 9 Replies
View Related
May 30, 2010
I attempted to install the mesa-dri-drivers-experimental package and my screen became unusable when I enabled desktop effects. I then uninstalled mesa-dri-drivers-experimental and tried to install the akmod before realizing that my card isn't supported yet. Now I can't seem to do anyting to get my screen back. I removed the blacklist on nouveau, but my screen still goes black after fedora boots. Is there any way I can just get things back to default without reinstalling the whole system?
View 1 Replies
View Related
May 21, 2010
installing the software BluePad, which allows a user to control their desktop environment with a Java-enabled mobile phone. I am still adjusting to Fedora (and some other Linux distros) from Windows and I am unfamiliar with installing and executing software programs. Also, if you could also include any pre-requirements involved in the installation..
View 3 Replies
View Related
May 24, 2010
I was installing cairo-deck and to get rid of the black rectangle i enabled compositing.I got bored of it so I uninstalled it but compositing was still there! I tried to disable it with
Code:
gconftool-2 -s '/apps/metacity/general/compositing_manager' --type bool false
but all i get is
Code:
# gconftool-2 -s '/apps/metacity/general/compositing_manager' --type bool false
Error setting value: Failed to contact configuration server; some possible causes are that you need to enable TCP/IP networking for ORBit, or you have stale NFS locks due to a system crash. See [URL]... (Details - 1: Failed to get connection to session: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.) I'm using fedora 12 32-bit full upgraded
View 2 Replies
View Related
Feb 23, 2010
Just got a VisionTek ATI Radeon HD2600Pro, which my Fedora 12 64-bit system seems to have no problem recognizing natively (though it is peculiar that it shows up in lspci as an a 'HD3600' instead of 2600), so things seemed fine ... til I tried to start X. To be thorough: I went from an nVidia Quadro NVS 285 in the system using drivers from rpmfusion, to this card in hopes of getting better graphics and compositing support. So I tried uninstalling the nVidia drivers and kmods, blacklisting radeon and radeonhd mods, installing the stock ATI driver straight from the ATI/AMD site (which included header compilation), and starting X ... no go. Then removed that, installed the OpenDrivers stuff ... still no good. Ended up removing all Xorg configuration (literally removing xorg.conf) and starting X with bare bones. And now X will indeed start up and go into my desktop environment (KDE), but as soon as I open more than a single application window, the system becomes virtually unusable, and compositing is completely out of the question.
Any advice for drivers/config/setup to get this working? Or do I need to go back to my crappy 128MB NVS card?
View 14 Replies
View Related
Apr 30, 2010
I've just completed a successful clean install of Ubuntu 10.04 LTS (32 bit).Out of the box, Desktop effects worked flawlessly.However, after installing the Ati driver from the Hardware Drivers utility, when I try to enable Normal desktop effects (Instead of None) I get a message saying "Desktop Effects Could Not Be Enabled". The Hardware Drivers utility says "Driver is installed and currently in use"
Installing and running glxgears from a terminal gives the error: "Segmentation Fault".The hardware in question is an Ati Radeon 4xxx series (I think it's a 4800 but can't remember exactly)
View 2 Replies
View Related
Jul 17, 2010
how do i enable visual effects. whenever i click to enable it says searching for available driver. then it says desktop effects can not be enabled. I am trying to enable them so i can do the cube and stuff.
View 5 Replies
View Related
Dec 20, 2010
For reasons I cannot fathom my desktop effects have stopped working in Ubuntu 10.10 64 bit, I have an Intel chipset and it was running fine, now they have stopped working.I have tried updating intel PPA's, Compiz PPA's and even X PPA's but nothing works
View 6 Replies
View Related
Feb 7, 2011
I can't enable my desktop effects. That is when I try to do so I get the error: Quote:Desktop effects can't be enabled.
View 9 Replies
View Related
Mar 15, 2011
I have to open another DECNBE thread just because I didn't manage to find a solution by studying all the other related stories that took place here in Ubuntuforums.org.Here is my output from Compiz-Check
Code:
paneas@ubuntu:~/Downloads/compiz-check$ ./compiz-check
Gathering information about your system...
Distribution: Ubuntu 10.10
Desktop environment: GNOME
[Code]...
View 4 Replies
View Related
May 10, 2011
Before i had problem with compiz in my laptop and i has solve it,but new problem found with driver of ATI HD 4650 in my laptop (Dell N4010),
View 1 Replies
View Related
Dec 7, 2010
I'm currently running Ubuntu 10.10 on VMware.My computeas a NVidia 8800GT graphics card.I'm trying to activate the Desktop Effects but keep getting the following error message: "Desktop Effects could not be enabled"I'm very new to Linux so I'm still in the extreme learning phase.My goal is to get Compiz to work. I was able to download/install it but I don't think it's working because of the Desktop Effects issue I have
View 4 Replies
View Related
Jul 6, 2010
I have an HP Proliant DL380 G6 server (relatively new), and I can't enable desktop effects. I'd think even a recent integrated GPU would be able to do this right? Why can't I do it?
View 4 Replies
View Related
Jan 16, 2011
am running Linux mint ver. 10 I can't enable desktop effects,where can i see which display driver i use ?Inside Additional driver all i see is VM VirtualBox Guest additional for linux module
View 2 Replies
View Related
Dec 21, 2010
I updated to latest -current last night and since then have not been able to login to my KDE desktop. After typing in the password, I get the starter icons come up, and just as the last one comes up, the desktop logs out to the login screen again. I worked out that it was because desktop effects were enabled - disabling these in kwinrc allows me to login, although without desktop effects.Using NVidia 256.53 binary drivers b.t.w.
View 3 Replies
View Related
Feb 24, 2010
1. When I try to enable Desktop Effects it says "Searching for Available Drivers" then says "Desktop effect could not be enabled".
2. When I play and game the has 3d Modeling, it chops to about 3 FPS and is completely unusable. But heres the deal, I have a ATI Raedon X850XT Platinum card, which I know can handle it. I'm using Ubuntu 9.10 and have everything up to date.
View 9 Replies
View Related
Apr 29, 2010
I go to preferences/appearance to set my visual effects at extra and get an arror message: desktop effects could not be enabled, I tried normal with the same result.
View 4 Replies
View Related
Oct 19, 2009
I've just added an extra 1GB of RAM memory to my laptop (HP 530). Now I have 2 GB. Everything runs great, except Compiz and 3D games. It looks like anything that's related to the graphics card now slows down. Rotating the cube lags badly, so does the Burn effect, and UrbanTerror is lagging too.
Before the upgrade, I had a Samsung 1GB SO-DIMM, 667 MHz. Then, I bought a Kingston 1GB SO-DIMM, 667 MHz too. When the laptop boots with either of the SO-DIMMs (only ONE GB at a time), everything runs smoothly, like before. But when I put both of them (regardless of the order in the sockets), my video card seems to slow down at nearly half of it's speed.
I haven't tried with Windows yet. Also, my graphics card has a dedicated memory of 256 MB, so there's no memory sharing between video and the RAM.
I just don't get it. Also, there are other people that seem to have slowdowns after upgrading the RAM, but usually the whole system is affected. For me, it's just the video. It actually boots faster with the 2 GB. Yet I found no clear solution to this.
Running Fedora 10 i686, on a 32-bit Intel Core Duo @2200 MHz, video card Intel 945GM Express, with 256 MB of dedicated memory. The swap partition is 2.8 GB in size.
View 2 Replies
View Related
Apr 30, 2010
I am getting following error while trying to enable 'compiz' in 10.4.
"Desktop effects could not be enabled"
Output of [URL]
Gathering information about your system...
Distribution: Ubuntu 10.04
Desktop environment: GNOME
Graphics chip: Intel Corporation 82G33/G31 Express Integrated Graphics Controller (rev 02)
[Code]....
So, it looks like my hardware support all what it needs for Compiz. What else is going wrong here?
View 9 Replies
View Related
Oct 18, 2010
I installed 10.10 (tried upgrade and clean install) on my thinkpad x40. I could not enable desktop effects and video playback is very sloppy. On 10.04 works fine. I tried compiz-check
Code:
Gathering information about your system...
Distribution: Ubuntu 10.04
Desktop environment: GNOME
Graphics chip: Intel Corporation 82852/855GM Integrated Graphics Device (rev 02)
Driver in use: intel
Rendering method: AIGLX
Checking if it's possible to run Compiz on your system...
Checking for texture_from_pixmap... [ OK ]
Checking for non power of two support... [ OK ]
Checking for composite extension... [ OK ]
Checking for FBConfig... [ OK ]
Checking for hardware/setup problems... [ OK ]
This is the output on 10.04
Code:
Gathering information about your system...
Distribution: Ubuntu 10.10
Desktop environment: GNOME
Graphics chip: Intel Corporation 82852/855GM Integrated Graphics Device (rev 02)
Driver in use: vesa
Rendering method: AIGLX
Checking if it's possible to run Compiz on your system... [SKIP]
Checking for hardware/setup problems... [SKIP]
At least one check had to be skipped:
Error: vesa driver in use
Would you like to know more? (Y/n) y
The vesa driver is not capable of running Compiz, you need to install the proper driver for your graphics card. I tried with newer kenel, but no luck. I tried to install the newer driver from intel. I am not quite sure I managed to install them properly, though. Is this the appropriate sub-forum for this topic, or "hardware and laptops".
View 6 Replies
View Related
Jan 19, 2011
Im a new member here.So please don't get mad at me.If i posted on a wrong section(Am I in the right section?) By the way,Here is my problem. My graphic card is Intel 82852/82855.And it passes the Ubuntu Desktop Effects requirement. I am aware of enabling the graphic card in Ubuntu 10.10, Since enabling the drivers was successful. I enabled the desktop effects.After i switched to Normal(Graphic Mode)the screen went blank. Then after i clicked ALT+TAB. there is an option to keep this option or not.I clicked Keep this settings. Then i proceeded in Web browsing(because i'm a web addict). Then i click CTRL+ALT+LEFT/RIGHT For the workspaces to switch. Then i found this 4 square transparent with black margin boxes.Which has a weird distorting effect.That effect is going crazy. Then i rebooted(Hoping to fix the problem).Then it is still there.
View 1 Replies
View Related
Apr 30, 2011
I just upgraded to unity and everything is fine. Then I accidentally enabled Desktop Cube and Cube Rotation. Suddenly, the top part of windows that you normally use to drag the window or close it etc. started disappearing. In a panic, I rebooted. Upon reboot I found myself in an even bigger mess than I could have imagined. Not only did this fail to fix the problem previously mentioned, it also caused the sidebar and the ubuntu bar at the top to disappear. Desktop icons still show, and my cursor is fully functional, but other than that, my system is unusable.
View 5 Replies
View Related
