Ubuntu :: Error "Could Not Find A Compatible Opengl Display Resolution. Please Check Your Driver Configuration. (Error: Couldn't Find A Matching GLX Visual)"

Jul 22, 2011

I am having issues with 3d I am trying to start up a game called auteria but it displays this error "Could not find a compatible opengl display resolution. Please check your driver configuration. (Error: Couldn't find a matching GLX visual)" I am on ubuntu 10.10 could anybody give me a solution on how to fix this issue?

View 5 Replies


ADVERTISEMENT

Ubuntu :: ERROR: Couldn't Find Matching Glx Visual

Aug 4, 2011

When I try to play some OpenGL games, I get this error.How can I fix this? My graphics card is Nvidia, and I use the nvidia-current driver.Here's what it says under OpenGL/GLX Information. I don't know if this is the info you need, but oh well.

GLX_EXT_visual_info
GLX_EXT_visual_rating
GLX_SGIX_fbconfig
GLX_SGIX_pbuffer

[code]....

View 3 Replies View Related

Hardware :: ATI Mobility Radeon Legacy Driver / Error Couldn't Find RGB GLX Visual Or Fbconfig?

Apr 3, 2011

I'm having an issue and I'm trying to figure out if the proprietary driver from ATI is actually getting installed correctly or if I'm on the open source driver still. ...and whether or not there's an advantage to one over the other...

I'm on a Sager NP3790 with an ATI Mobility Radeon 9700 graphics card. I've got a fresh install of Ubuntu 10.10 and the basic 2d functions all seem fine, but any games I try to run with OpenGL simplt fail and "glxinfo" yields:

Error: couldn't find RGB GLX visual or fbconfig

lspci -k yields:

01:00.0 VGA compatible controller: ATI Technologies Inc RV350 [Mobility Radeon 9600 M10]
Subsystem: CLEVO/KAPOK Computer Device 0471
Kernel driver in use: radeon
Kernel modules: radeon, radeonfb

I have downloaded the latest legacy driver from ATI (ati-driver-installer-9-3-x86.x86_64.run) and I've not had any success running that directly. It appears to not knowingly support anything newer than Ubuntu 9.04. I have tried forcing that driver to build itself targeting 9.04 and I've tried installing the .deb packages that it produces, but with no luck there either.

If I recall this laptop's former lives, it has in the past run Eternal Lands without issue back when it was Ubuntu 8.x, but somewhere between a client update from them, some update from ATI or Ubuntu I seem to have lost my OpenGL capabilities.

View 5 Replies View Related

Ubuntu :: Couldn't Find Matching GLX Visual Would Installing Nvidia-glx-173 Package Be The Solution?

Dec 17, 2010

using nvidia_173 driver from repository with nvidia geforce fx5500 sping returns this:
Could not set video mode: Couldn't find matching GLX visual would installing nvidia-glx-173 package be the solution? just realized i had the nvidia_173 driver activiated, but not in use. ran "sudo nvidia-xconfig" boots in tty1, so i navigated to the X11 directory and deleted xorg.conf, boots to gnome now

how do i keep it from going to tty1? i know there are threads on this here and there, but most leave you with the default driver, and i want to keep nvidia_173

View 9 Replies View Related

Slackware :: 3D Acceleration With NVidia 8500GT PCI-E Graphics Card - Error: Couldn't Find RGB GLX Visual Or Fbconfig

Oct 20, 2010

I have a Slackware 13.1/64-current system running the 2.6.35.6 kernel that I have installed the most recent nvidia drivers for (as of yesterday or day before) 260.19.12. If I boot up into run level 4 after running nvidia-xconfig in a console and run glxinfo as root I get:

Quote:

bash-4.1# glxinfo
name of display: :0.0
Error: couldn't find RGB GLX visual or fbconfig

If I edit /etc/profile or /home/username/.bash_profile and add the following:

Quote:

export LIBGL_ALWAYS_INDIRECT=X

I have set both X=0 and X=1 as reported by [URL] I get the screen of information except it says

Quote:

direct rendering: No (LIBGL_ALWAYS_INDIRECT set)

my lspci -v for the graphics card looks like this:

05:00.0 VGA compatible controller: nVidia Corporation G86 [GeForce 8500 GT] (rev a1) (prog-if 00 [VGA controller])
Subsystem: XFX Pine Group Inc. Device 2353
Flags: bus master, fast devsel, latency 0, IRQ 16

[code]....

I am sure I missing something from my xorg.conf but at this point I am not sure what I have been searching on this for days to no avail. From the log the only thing that looks like is a problem is it doesn't load the keyboard and mouse but it gets loaded later on in the file.

View 13 Replies View Related

OpenSUSE Install :: Error In Installing Gcc 4.5.0 - Error Couldn't Find The C Compiler

Sep 9, 2010

i tried to install gcc-4.5.0 on opensuse 11.2 I gave ./configure but it gave the error couldn't find the c compiler.. the message was

[Code]....

View 2 Replies View Related

CentOS 5 :: Mounting Windows Share - Get An Error 'Couldn't Find "smb://blah/blah" , Check The Spelling And Try Again?

Nov 12, 2010

I'm trying to mount a Windows Server share from Centos 5.5 (kernel 2.6.18-194.26.1.el5). I've tried two approaches neither of which work.

1). Using Places->Connect To Server. This approach works fine on Ubuntu but not at all for Centos. Using the 'Windows Share' Service type, it allows me to see the remote directory - I can see all of the directories on the server. But as soon as I click one, I get an error 'Couldn't find "smb://blah/blah". Please check the spelling and try again. As I say, this worked fine on ubuntu. Tried loads of options but with no luck. I saw something on the web about leading slashes being a problem.

2). Using Mount . Tried to use mount to mount as a cifs filesystem, as documented on a number of web pages:

mount -t cifs //server/dir -o username=username,password=password /mnt/tmp

This completely hangs the machine.I means completely, no mouse, no nothing. I've seen some references to unstable cifs on the web but I believe that this kernel has the fix for this.

View 5 Replies View Related

Ubuntu :: 23.4618531 [drm] Nouveau 0000:01:00:0: Couldn't Find Matching Script Table

Nov 23, 2010

i just upgraded to 10.10 thru update manager, had problems upgrading, had to disable Nvidia - nouveau to upgrade and everything went well for 5 days but then i disabled backports in software sources then i changed visual affect from normal to extra and turned computer off. NOW i cant use ubuntu it just freezes on the purple ubuntu screen prior to login.have tried using safe mode and repair broken packages, which did a 21mb update but still nothing but freeze. i get this message in safe mode

23.4618531 [drm] nouveau 0000:01:00:0: couldn't find matching script table
24.514673 " "
24.514696 " "
24.752897" "

i can follow terminal commands BUT thats all i dunno how to use terminal by myself

View 1 Replies View Related

Ubuntu :: Nvidia, Unity, Glxinfo Couldn't Find RGB GLX Visual

Apr 5, 2011

Distro: Ubuntu 11.04-beta1 'natty'
Problem: 'your hardware does not support Unity; you will be using Ubuntu Classic.'
Installed: nvidia-common 0.2.28,
nvidia-current 270.30-0ubuntu3,
nvidia-settings 270.29-0ubuntu1,
linux-image-generic-pae 2.6.38.7.21,
linux-headers-generic-pae 2.6.38.8.22

[Code]....

After reading a few other threads on the matter, I suspect the problem is with the 'nvidia-current' package more than the libgl1-mesa-glx or unity packages. ... though it does seem odd that Unity doesn't have a non-OpenGL verison.

If I find a solution, I'll come back. I hope the answer isn't "ditch nvidia-current for the binary install script from nVidia direct." If someone found this thread in a search, the nVidia driver install scripts can be found at [URL]

View 6 Replies View Related

Ubuntu :: Apt-get Error / E / Couldn't Find Package

Apr 26, 2011

I have ubuntu intrepid installed in one of the amazon servers , when i try to install any software using apt-get i used to get the following error.Code: E: Couldn't find package E: Some index files failed to download, they have been ignored, or old ones used instead.

View 5 Replies View Related

OpenSUSE Network :: Couldn't Find Compatible GRE Between Version 1.9.2.3 And 1.9.2.3

Apr 29, 2010

I seem to have a problem with my Firefox upgrade. I am getting the following error: could not find compatible GRE between version 1.9.2.3 and 1.9.2.3.

View 9 Replies View Related

General :: Error: Couldn't Find Clock_gettime?

Jul 3, 2010

When i install libdrm, i get the following error:checking for clock_gettime... no.checking for clock_gettime in -lrt... no.configure: error: Couldn't find clock_gettime

It seems that it cannt find clock_gettime function, but i find it as follow:
$ grep clock_gettime /usr/include/time.h
extern int clock_gettime (clockid_t __clock_id, struct timespec *__tp) __THROW;

View 6 Replies View Related

General :: Runtest Error: Couldn't Find Library File Gcc-dg.exp

Sep 16, 2010

I am trying to run i386 in gcc_test-suite using dejagnu runtest and it fails with error given below. I can see that gcc-dg.exp is in folder gcc-4.6-20100911/gcc/testsuite/lib, but runtest is not searching in this folder.

how to resolve this issue and run only i386 tests.

$ cd /gcc-4.6-20100911/gcc/testsuite/gcc.target
$ runtest -a -tool i386 -verbose
....
....
Looking for library file /usr/local/share/dejagnu/lib/gcc-dg.exp

[Code].....

View 6 Replies View Related

Software :: Error: Couldn't Find End Of Start Tag Rpm:entry Line 15303

Feb 8, 2010

I am using preupgrade to update Fedora 9 -> Fedora 12 following these steps: -

Code:
yum -y update
yum clean all
yum install preupgrade
preupgrade-cli
preupgrade-cli "<FEDORA VERSION>"
reboot

I successfully upgraded this box from Fedora 6 => Fedora 9 and I guess I got too confident when this worked without a hitch and went straight from Fedora 9 => Fedora 12. Everything works up until the very end of the upgrade process when I get this error.

Code:
(process:2227): GLib-WARNING **: GError set over the top of a previous GError or uninitialized memory. This indicates a bug in someone's code. You must ensure an error is NULL before it's set. The overwriting error message was: Parsing primary.xml error: Couldn't find end of Start Tag rpm:entry line 15303

[Code]...

View 1 Replies View Related

Ubuntu :: Conky Weather Doesnt Work - Error - E - Couldn't Find Package Conkyforecast

Sep 23, 2010

My conky weather doesnt show any thing and I already got my Partner ID , License Key and Location ID and I tried to run the command below to install ConkyForecast: sudo apt-get update && sudo apt-get install conkyforecast

But I have got this error : E: Couldn't find package conkyforecast and I dont know what to do , Can you guys tell me what should I do ?

View 2 Replies View Related

OpenSUSE :: Error: Couldn't Get An RGB, Double-buffered Visual

Feb 7, 2010

Whenever I run glxgears or glxinfo from an ssh or vnc session, I get "Error: couldn't get an RGB, double-buffered visual". I can run glx stuff fine on the console under KDE, but that's not practical for the intended users. I've tried updating drivers (it's a Dell R610 w/ Matrox G200ew videa), firmware, rpms, etc., even running ssh with -X or -Y, but to no avail.

View 9 Replies View Related

Ubuntu :: X11 And OpenGL - Keep Getting Resolution Error

Jan 14, 2011

I was trying to get a game to work (scorched 3d) but I kept getting a resolution error. So I did some looking around and found that I had to do something with xorg.conf in /usr/bin/x11 (if I remember). Well I didn't have that file, so I installed a program that had it (and for the life of me, I don't remember what it was). Long story short, I tried to run a different game (foobillard) and it wouldnt run. So I ran from terminal and got an error saying that x11 is not configured with opengl. Now I am mad cuz that was my favorite game. Is there a way to reset x11 and opengl without losing everything?

View 2 Replies View Related

General :: Find/grep/wc Command To Find Matching Files - Print Filename And Word Count?

Sep 11, 2009

I am trying to do a find/grep/wc command to find matching files, print the filename and then the word count of a specific pattern per file. Here is my best (non-working) attempt so far:

wc `find . ( -name "*.as" -o -name "*.mxml" ) -exec grep -H HeightResizableList {}` ;

View 10 Replies View Related

Ubuntu Installation :: Error "Couldn't Find Package"

Aug 18, 2010

i have installed this Ubuntu in virtual-box running in windows xp. my INTERNET connection is working fine but i m using proxy for that. my problem is that when i want to install something through sudo apt-get install xxxx(whatever) it gives error "Couldn't find package".

Example:
#sudo apt-get install wine
Reading package lists... Done
Building dependency tree
Reading state information... Done
E: Couldn't find package wine

View 9 Replies View Related

Ubuntu :: Lkl Installation - Error "Couldn't Find Package Lkl"

Mar 7, 2011

I am not able to install linux key logger on my ubuntu 10.04 is my os this is the result that i got user36@lib-desktop:~$ sudo apt-get install lkl Reading package lists... Done Building dependency tree Reading state information... Done E: Couldn't find package lkl user36@lib-desktop:~$

View 9 Replies View Related

Ubuntu :: Install G++-3.3 In 10.04 - Error "Couldn't Find Package G++3.3"

May 6, 2011

g++4.4.3 has already been installed in Ubuntu 10.04. However, g++-3.3 is needed to compile a stupid source code (g++-4.4.3 does not work out).

[Code]....

Other g++ versions, including g++-4.1, g++-4.2, g++-4.3, and g++-4.4, are available. Why g++-3.3 is not on the list.....

View 5 Replies View Related

Debian Configuration :: Server Internal Error 500 - How To Find

Sep 6, 2011

i'm facing an error 500 internal error and i don't know where to start .... How can i get information about the error in order to fix it ???at /var/log/apache2/error.log i can't find anythingi have virtualmin installed , i searched at/var/log/virtualmin/domainname_error_log but nothing .... where is apache supposed to keep log for 500 errors ?

View 1 Replies View Related

Ubuntu Installation :: Error - (EE) No Input Driver Matching `fpit'

Apr 29, 2010

I've just finished installing lucid and started setting up my tablet and all went well until I tried to install the fpit driver. I tried installing it from synaptic but it says it has to remove ubuntu-desktop, xorg, xserver-core -- some very important things and then says "xserver-xorg-input-fpit: Depends: xserver-xorg-core but it is not going to be installed." I tried downloading the deb and extracting the driver manually but Xorg complains with:

Code:

(II) LoadModule: "fpit"
(II) Loading /usr/lib/xorg/modules/input/fpit_drv.so
(II) Module fpit: vendor="X.Org Foundation"

[code]....

View 7 Replies View Related

OpenSUSE Install :: Couldn't Find Live Image Configuration File

Aug 12, 2010

I'm getting this error trying to install Live GNOME 32bit v11.3 or 11.4 build 11:

Code:
Couldn't find Live image configuration file

I'm installing from a USB stick. I can install v11.2 the same way no problem. USB stick created using SUSE Studio Image Writer and Win32DiskImager give same results.

View 2 Replies View Related

Ubuntu Installation :: Video Driver On Cd No Go - Error Autorunning Software - Cannot Find The Autorun Program

Apr 1, 2011

I just installed Ubuntu on my brand new system that I built. I put in my cd for my HD 5770 video card, and an icon shows up on my screen XFX_VGA_V9.8C text under it.

However when I try to access it in anyway, I try to open with autorun prompt, I get a message "This medium contains software intended to be automatically started. would you like to run it?"

I click on run and get "Error autorunning software, cannot find the autorun program."

Is there anyway that I can run this disk. It's important for setup. I cant copy the disk to the desktop, I get errors.

View 5 Replies View Related

General :: GNU Find: Disable The Error When 'find' Finds No Matches

Aug 21, 2011

I've got a setup where I need to use 'find' to find 0 or more files in a certain directory, however, 'find' always produces an error when there are no files that match a certain check. Is it possible to run 'find' while having it omit errors when no files match the pattern?

View 2 Replies View Related

Ubuntu Installation :: Error - The Boot Configuration Data Store Could Not Be Opened - The System Cannot Find The File Specified

May 24, 2011

every-time i try to install, i get this

Error executing command
>>command=C:Windowssysnativecdedit.exe /create/d Ubuntu/application bootsector
>>retval=1
>>stderr=The boot configuration data store could not be opened
The system cannot find the file specified
>>stdout=

View 1 Replies View Related

Ubuntu :: Error: Could Not Find Expat.h, Check Config.log For Failed Attempts So I Downloaded Te Expat Library Sources I Cross Compiled

Feb 13, 2010

I am getting some error when i compile cross compile "dbus-1.2.20". error Code: checking for XML_ParserCreate_MM in -lexpat... no configure: error: Could not find expat.h, check config.log for failed attempts so i downloaded te expat library sources i cross compiled. But again i am getting same error. I think i have to add "-lexpat" in LDFLAG. But i dont know how to do that.

View 1 Replies View Related

Fedora :: Coin Error In Glxglue_init(): Couldn't Open NULL Display

Jan 23, 2010

I wrote a simple code using Open Inventor(OpenGL) classes to print a Sphere in a .png file.I tested it on Windows and it worked well.But when I run it on Fedora 10, I got the following error with no output .png file:

Coin error in glxglue_init(): Couldn't open NULL display. Coin warning in SoOffscreenRenderer::renderFromBase(): Could not set up an offscreen OpenGL context.
Segmentation fault

View 2 Replies View Related

Programming :: Find Command With Standard Error Output And Mail Error File

Nov 11, 2010

We make everyday a DB Mysql backup on Linux redhat Enterprise. We are using a bash shell script (and putting it in the crontab) to execute it automatically everyday. We added a line to this script telling, once the backup has completed, to find old backup files (stored on hard disk after each backup) older than x days to remove them. We use the find command (search for file type) with the mtime option and in combination with rm command. Everything runs ok but we also want to add some new code to the same line: If find command cannot find anything or fails, for example if it cannot delete file or fails, send the error message (standard error output) to an error file (like error000001 and increasing) and mail the errorxxxx file to an email address for example to admin@companyname.com. What would be the code for this issue to add it to our find command in the same bash shell script??

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved