I am going to install 11.3 on a system with a Phenom X6 and 16 GB memory.I'm now unsure whether to set up a 64 bit system or a 32 bit system with pae.Are they equivalent what concerns use of the complete 16 GB memory? I assume 64 would be more effective?On the other hand there seem to be less problems with the availability and/or installation of applications on a 32 bit system.
View 3 Replies
I took out this 120gb HD from an old computer which I recycled. I took out the SATA cable and an IDE cable just in case I would need them for the installation. This would work great as a backup HD for my current 320gb HD. I have never had a backup HD, so I don't know how it works. I have numbered my concerns to make for easy reference.
1. First, however, is one concern I forgot to address. When I looked up the documentation for my computer (Inspirion 530), it mentions that "NOTE: For additional drives, extra screws are not shipped during initial purchase of the computer, but are shipped with the additional drives." This is terrible! Had I known, I would have taken out some screws from the old computer, but now it is gone, and I don't know what kind of screws I need. I don't even know where to buy them.
2. In terms of installing the new HD, I read that all I need to do is connect the SATA cable and the power, and then boot up to BIOS, where I would "activate" my drive. Then, Ubuntu should be able to identify it immediately. Since I am thinking about doing a fresh install to 10.04, I am thinking about formatting this new drive to ext4, and then backing up my important documents/pictures/music onto this second drive.
Finally, I would boot up to the 10.04 live disc, and simply do a fresh install onto the 320gb HD, knowing that my files are backed up on the 120gb one. Would this procedure work fine, or would Ubuntu have trouble identifying the HD?
3. My final concern is regarding automatic backups. Assuming that I am able to install the HD perfectly, and get a fresh install of 10.04, I want a program or mechanism to help me backup on a regular basis. I know that Mac users have a convenient program called "Time Machine" but there is no such counterpart for Linux. I also know that there are some command-line utilities that I can use, but I would like to stick with a GUI.
I just wanted to install Kdenlive and I added the requested repositories. The one called "packman" included unsigned files that were labelled "untrusted" by the installer. Is it still safe to install it? What's your opinion?
View 1 Replies View Relatedwe found that if we use 'top' to show the memory usage of a server (SuSe Linux 10), we can get virtual memory usage as well as 'Resident memory' usage. For virtual mem or a particular process, it is around 1.1GB, which is large but for resident memory, it only consumes 300MB. Are there anyone who knows what the differences are? I would also like to know whether the difference (1.1GB - 300MB) = 800MB are actually available for use by other applications in the system.
View 1 Replies View RelatedIn the past month my root folder has become corrupted 3 times. General system restore doesn't help and installing the default kernel doesn't help. I don't expect a forum to be able to help with the corruption issus but is there any way to restore root without a complete re-install? It's a little time consuming.
View 7 Replies View RelatedI am running an openSuse 11.1 server.
How easy is it to install a complete Bugzilla system for my own internal use?
Is there an rpm that will set it up automatically?
Is it part of the distro? Or 11.2 or 11.3?
What is the easiest way to install it?
I have been running 11.2 32bit on my IBM T43 laptop without issue. Tonight I downloaded 11.3 32bit and installed to HDD. On reboot into new system laptop has complete freeze. Can not do anything but power off to reboot. I also found the same situation if I try to run KDE live off the cd. Oh yes, I downloaded the openSUSE 11.3 KDE Live CD version.
So here is what I found. On bootup (either HDD install or Live CD desktop) I will goto to tty1 or tty4 to see the boot up process messages. And it get right up to the login prompt without issue. If I then switch back to tty7 (the normal bootup display) after a few seconds the screen and laptop itself completely lockup (freeze). So I power off to reboot.
this time I boot up in tty1 again until login prompt but this time I type root to login. Then I switch to tty7 and now I can see the desktop. I goto the menu to search and load up Kinfocenter but then its freezes again.
So its very frustrating as I can not use this new version of openSUSE on my laptop. It just keeps freezing. Whats worse is I cant see any logs or screen message in tty1 because once it starts to login to desktop it freezes. So I am not even sure how to troubleshoot any further what the issue is. I assume its KDE4 or XOrg server.
I have installed openSuse 11.2 in vmware that is a virtual box on win7 ,last time when I logged in I tried to change some desktop effects. [COLOR="rgb(0, 0, 0)"]When I again started suse , up to login screen everything was working fine. but after logging in I am getting a COMPLETE WHITE SCREEN and everything gets stuck ...
[/COLOR]
latest update to 11.3 a complete failure afterwards on reboot I'm instructed that I must first install kernel and to strike any key to exit which return me to grub menu. thats it for me and Osuse. 11.3 has been one bug after another and to much for me overcome. I will return once a day to see if anyone can fix this/
View 9 Replies View RelatedI have two Ubuntu PCs at home and I found out about apt-cacher as a means of reducing internet usage for updates. (my connection speeds aren't that good). When I install apt-cacher, is it possible for anyone on the internet to use my PC as a repository? If so, how can I allow only computers on my LAN to access the apt-cacher cache?
View 9 Replies View RelatedWhen there is a total of 2 GB of physical RAM, how much RAM would you give to openSUSE-11.2 (i586) with KDE as a VirtualBox guest in Vista? There is no intention of running a second VM at the same time.
View 6 Replies View RelatedOn my windows console, i have installed sun virtualbox. I only have 768MB ram and so i downloaded a trial version of eboostr. I thought it would work, but when i tried an install of 11.2, also, i tried a debian install, it did the same thing, it froze up in the middle of the install with the error Code: unable to allocate and lock memory. I guess that eboostr doesn't work, but is there a way to use a flash drive as ram in virtual box?
View 5 Replies View RelatedopenSUSE 11.2 installed on machine with 5GB memory but System Information in KDE desktop shows only 3GB total memory. Just added a further 4GB but no change shown in System Information.
Is there something I must do to have sysinfo report true value and does this mean that memory not shown is not being used?
POST BIOS check shows 9GB installed.
I am getting a "No devices matches MBR identifier 0x8c71ad6e!" message along with a reboot in 120 seconds message. This occurs after kernel load and at the start of openSUSE boot.
I have tried both the 64bit and 32bit downloads
openSUSE-11.2-KDE4-LiveCD-i686.iso
openSUSE-11.2-KDE4-LiveCD-x86_64.iso
I have checksum checked both images after download. I have attempted the install on CD and USB stick with both images and the result is always the same.
I've included a screen image on my site: No Devices Matches MBR Identifier | Badzilla
When the systen is running there is a program/utility/kernel-driver? kthreadd in system monitor all the following programs are a child process of kthreadd. Is kthreadd part of elevator=cfq and can kthreadd be influenced by params. kthreads uses no cpu time memory or shared memory so it must be in kernel. is there any documentation on this subject? System 11.3 on quad processor 8 gb mem nvidia-card and driver.
View 3 Replies View RelatedI have OpenSuse11.4 32bits, 4Gb of RAM
[code]...
I would like to add the option mem=4096M to make some software works. but as long as I try with more than 512M, I have the error: error 28 selected item cannot fit into memory.
I'm trying to install oracle (11g R2) on my OpenSuse (11.3), but when I do startup nomount, I got an error:
ORA-00854: MEMORY_TARGET not supported on this system
On web, I found that I need to increase tmpfs because of my memory_target oracle init parameter. I do it with:
mount -t tmpfs shmfs -o size=3G /dev/shm
(previous value to tmpfs (df -h) is 2G).
After that 'startup nomount' runs well, but after reboot, values are the same. So, how to 'save' this new value?
Until now I have been running a single threaded cpu at single channel speed but yesterday I bought a 3.2 gig p4 for 20 bucks. It has hyperthreading and an 800 mhz fsb which supports dual channel speeds on the chipset. It hasn't arrived yet so I haven't put it in the system but what I would like to know is whether 11.4 work properly with these changes, and will it detect and implement them properly or will I need to reinstall it?
View 5 Replies View Relatedwhen i do a paravirtualised install coz fully grey out (how do you get round this) and ftp install path is ftp://192.168.1.1:65354/bie764.iso
i get error:
Unable to complete install 'exceptions.ValueError Invalid install location: Opening URL ftp://tj:tj@192.168.1.1:65354/bie764.iso failed.
Traceback (most recent call last):
File "/usr/share/virt-manager/virtManager/create.py", line 724, in do_install
dom = guest.start_install(False, meter = meter)
[code]...
does it not accept ftp passwords.. what ftp server program (with autostart so it works with crossover linux as i know no other way start apps with that. can try to insta wine but need rpm) will work
When I boot into Debian 8, I pull up a terminal and as root enter "apt-get install xfce4"... It then tries to install but asks for the install DVD. When I insert the USB it will not install from it. It doesn't even acknowledge that it was inserted. It is only looking for a DVD drive. How can I make it pull the files from the usb installer stick?
View 2 Replies View RelatedI am running Fedora 8. Each time I run a YUM command, I get the message that there are unfinished transactions, and to run yum-complete-transaction. Upon running yum-complete-transaction, it fails with this error. How can I remove this uncompleted transaction so I can finish the last one?
View 2 Replies View RelatedWhen I start bluej and try to open files from my memory stick the memory stick is not available. Is there any way that I can open files directly in bluej from my memory stick.
View 3 Replies View RelatedI want to install fedora 14 completely to a USB drive, not the live USB but a complete installation. I am using linux after a long gap of 9 years and have forgotten most of the things.
View 1 Replies View Relatedi'm using Ubuntu 9.10. I just installed koffice (Version 1.x) which includes kformula.
Then i realized that koffice 2.x is already available which seems to be called "koffice-kde4" in the repositories... But koffice-kde4 doesn't have kformula included - where is it?
how i could install the complete koffice 2?
I wanna install flash in my machine.... from where do I install complete flash in my ubuntu.
View 3 Replies View RelatedI've tried about a billion times to get this to install correctly to no avail. This is the amd64 desktop edition, but I've tried with the 32 bit as well. I have a lenovo W500. The system never boots off the USB. It gets through a bit, with text output, and then stops. Sometimes it doesn't even give an error message, and other times I get something like udev failed while loading some pci device. I've tried re-downloading the iso several times, different USB keys, different USB key creators, CDs, to no avail.
I then thought, well, heck with it, I'll just install 10.10 and upgrade. Nope, there's a GPG key error for some bizarre reason, which is tripping up apt, but it's not going to tell me what key that is so I can go and get it (and apt-key update does nothing). Command line upgrades fail similarly. So finally, I go for broke and try to just install the thing with Wubi. Of course, that eventually crashes too.
Looks like I waited too long to upgrade from 9.04 to 9.10. Now the Update Manager wants to take my system to 10.04, but then says it is 'not supported with this tool'.Do I need to do a complete re-install of the OS? Is there a reasonable way to get to 9.10 without a complete re-install?
View 2 Replies View RelatedI'm trying to get my bearings in Fedora 13 (64-bit) in a virtual machine.I'm using the version with the Gnome DE.Now I'd like to install Koffice. But when I got to the package manager to select packages to install, I get a huge list of components to select for installation -- Kwrite, Kspread, Core support for Koffice, Libraries needed for Koffice, etc.Is there any way to select the version of Koffice that I want and have the whole set of necessary packages automatically be selected too?
View 3 Replies View RelatedMy routing table does not get complete for some reason. I'm using a Huawei E220 USB modem on openSUSE 11.3 using NetworkManager to connect.When I connect to the net the routing table looks like
Code:
/home/freefox # route
Kernel IP routing table
[code]....
Decided to upgrade my 8.04 server to 10.04 today. Everything went smooth when I tried to install in vmware. When I tried to install it on my real machine the installation hangs at 74% Storing Language...
I've checked the disk and I tried different ways to install (different language, both keyboard and system). The first two attempts the installer just turns off and the computer reboots. This third time it just hangs. how to debug and solve this problem?
It's the x86_64 version. I'm using the standard options all the time including LVM on whole disk.
