Ubuntu Installation :: Get To 9.10 Without A Complete Re-install?
May 26, 2011
Looks like I waited too long to upgrade from 9.04 to 9.10. Now the Update Manager wants to take my system to 10.04, but then says it is 'not supported with this tool'.Do I need to do a complete re-install of the OS? Is there a reasonable way to get to 9.10 without a complete re-install?
View 2 Replies
ADVERTISEMENT
Apr 30, 2010
Decided to upgrade my 8.04 server to 10.04 today. Everything went smooth when I tried to install in vmware. When I tried to install it on my real machine the installation hangs at 74% Storing Language...
I've checked the disk and I tried different ways to install (different language, both keyboard and system). The first two attempts the installer just turns off and the computer reboots. This third time it just hangs. how to debug and solve this problem?
It's the x86_64 version. I'm using the standard options all the time including LVM on whole disk.
View 1 Replies
View Related
Nov 6, 2010
When I visit packages.ubuntu site, I see dapper, maverick etc. What are these? Also I need to install complete gcc, g++ and dependencies. How to do it?
View 2 Replies
View Related
Jan 7, 2011
I was installing 10.04 as a dual boot with Win7, the install was interrupted and now I can't do anything with it. Booting, I get as far as '[0.541227] kernal_thread_helper' and it stops there with or without a disc. How do I complete the install or strip out something so that I can start again?
View 6 Replies
View Related
May 24, 2011
I just installed ubuntu 11.04 (64-bit) on my system. I mounted / on my SSD and /home on my HD. The installation proceeded for a while and then I suddenly got a message that the installer crashed. Nevertheless the installed linux seems to work and I can boot in Ubuntu. Not sure what exactly is wrong now that the install didn't complete. Any way for me to check what went wrong and what exactly I can do to make sure my system is ok? All appears ok but appearances can be deceiving.
View 1 Replies
View Related
Jul 29, 2010
I'm trying to make a complete install of ubuntu 10.4 on an old PC.When I boot from the CD, a text screen is displayed: "PhoenixBIOS Utility"
Code:
BIODate: 09/14/99
CPU type:celeron
[code]....
View 3 Replies
View Related
Jun 1, 2011
I want to install fedora 14 completely to a USB drive, not the live USB but a complete installation. I am using linux after a long gap of 9 years and have forgotten most of the things.
View 1 Replies
View Related
May 7, 2015
When I boot into Debian 8, I pull up a terminal and as root enter "apt-get install xfce4"... It then tries to install but asks for the install DVD. When I insert the USB it will not install from it. It doesn't even acknowledge that it was inserted. It is only looking for a DVD drive. How can I make it pull the files from the usb installer stick?
View 2 Replies
View Related
May 30, 2010
I'm trying to install Ubuntu on an Aspire laptop with Windows XP. I downloaded 10.04 and burned an ISO image. I boot Windows and open the ISO disk. I open the first choice which is to try Ubuntu prior to a complete installation. The installation starts and proceeds for a few minutes. Then it stops and displays a message 'Permission Denied' and a suggestion to check the installation log. The last few lines are:
[code]...
View 1 Replies
View Related
Jan 23, 2010
i just installed ubuntu and i wanna put wine on so i can install my itunes and adapters an so on. but when i try to install through terminal it always reads that theres no file found or cant complete installation. and theres no net hooked up to it cuz the wireless adapter wont work.
View 3 Replies
View Related
Mar 15, 2010
I installed the Eclipse IDE using Ubuntu packages. (Version 3.5.1. Package name:eclipse).A few days back, version 3.5.2 was released. I would like to update, so I added the following websites to the list of available ones:
[URL]
I then tried with Check for Updates. While on my Mac installation this results in an update to 3.5.2, on Ubuntu the program says there is nothing to update.If I try to install manually, choosing Install New Software and the then selecting the Eclipse Platform 3.5.2, I get the following error:
Cannot complete the install because of a conflicting dependency.
Software being installed: Eclipse Platform 3.5.2.M20100211-1343 (org.eclipse.platform.ide 3.5.2.M20100211-1343)
Software currently installed: Eclipse Platform 3.5.1 (Eclipse Platform 3.5.1)
Only one of the following can be installed at once:
[code]....
it is possible to update the packaged verison of Eclipse or if I should install the binary from the website?
View 3 Replies
View Related
Feb 9, 2010
i have a system that consist of fedora and xp which is dual boot configured, every thing is fine .when i tried to install deepofix mail server ,it prompted to select entire hard drive or existing partition(free space) when i selected option as free space, suddenly it showed "installation is complete reboot the system " yet i have to configure a lot more things such as network,ip,dns. i dont know what is the problem .Nothing is installed after that ,the same process repeats every time, when i try to install. Still i have 8gb free space in my disk
View 1 Replies
View Related
Aug 28, 2010
when i do a paravirtualised install coz fully grey out (how do you get round this) and ftp install path is ftp://192.168.1.1:65354/bie764.iso
i get error:
Unable to complete install 'exceptions.ValueError Invalid install location: Opening URL ftp://tj:tj@192.168.1.1:65354/bie764.iso failed.
Traceback (most recent call last):
File "/usr/share/virt-manager/virtManager/create.py", line 724, in do_install
dom = guest.start_install(False, meter = meter)
[code]...
does it not accept ftp passwords.. what ftp server program (with autostart so it works with crossover linux as i know no other way start apps with that. can try to insta wine but need rpm) will work
View 1 Replies
View Related
May 25, 2010
I have Ubuntu 10.04 installed in my laptop through a windows installation and I want to make a new, complete, install so I can boot directly in Ubuntu (and change some configuration choices I didn't get right in the first place). Is there any (as simple as posible) way to save my actual data (users, software installed, personal files...) as a whole so I can "install" all that back to the "new" Ubuntu installation?
View 4 Replies
View Related
Jun 23, 2011
How will be complete windows login after installation wubi? How to make choice between load windows and linux?
View 3 Replies
View Related
Feb 11, 2010
i'm using Ubuntu 9.10. I just installed koffice (Version 1.x) which includes kformula.
Then i realized that koffice 2.x is already available which seems to be called "koffice-kde4" in the repositories... But koffice-kde4 doesn't have kformula included - where is it?
how i could install the complete koffice 2?
View 2 Replies
View Related
Apr 22, 2010
I wanna install flash in my machine.... from where do I install complete flash in my ubuntu.
View 3 Replies
View Related
Apr 28, 2011
I've tried about a billion times to get this to install correctly to no avail. This is the amd64 desktop edition, but I've tried with the 32 bit as well. I have a lenovo W500. The system never boots off the USB. It gets through a bit, with text output, and then stops. Sometimes it doesn't even give an error message, and other times I get something like udev failed while loading some pci device. I've tried re-downloading the iso several times, different USB keys, different USB key creators, CDs, to no avail.
I then thought, well, heck with it, I'll just install 10.10 and upgrade. Nope, there's a GPG key error for some bizarre reason, which is tripping up apt, but it's not going to tell me what key that is so I can go and get it (and apt-key update does nothing). Command line upgrades fail similarly. So finally, I go for broke and try to just install the thing with Wubi. Of course, that eventually crashes too.
View 1 Replies
View Related
Apr 7, 2010
I ran Ubuntu 9.10 back in the days and when 10.04 Beta 1 was released I upgraded it by using the update-manager -d. My question is, if I use the upgrade-manager -d feature will it be like an actual beta 2 when it gets released and later on will it be the same as the full final version. Or must I do a complete re-installation if I want to run the final version of 10.04?
View 1 Replies
View Related
Oct 15, 2009
I am running Fedora 8. Each time I run a YUM command, I get the message that there are unfinished transactions, and to run yum-complete-transaction. Upon running yum-complete-transaction, it fails with this error. How can I remove this uncompleted transaction so I can finish the last one?
View 2 Replies
View Related
Apr 26, 2010
I currently have Ubuntu installed on my laptop.I have it set up the way I like it. However, I want Windows on here too...the thing is, I dont want to have to format if possible, I know that you need to install windows before Ubuntu. I have ubuntu all set up how I Like it and it would be a shame to have to wipe it.Is there any way at all I can install windows along side it without having to do a complete format?
View 3 Replies
View Related
May 5, 2010
Since having installed Lucid Lynx, I have several complete system crashes a day, no matter which applications I am using. Lucid crashes without any error message and the system reboots. I have had no problem whatsoever with Karmic Koala (also switched from ext2 to ext4 when installing Lucid Lynx). Is there any probable reason for that or a workaround? Can I paste any logs here for anybody to figure out what might be going on? When I try XP which is also install, the system won't crash (so far...), so I don't think it's a hardware problem.
My system:
Mainboard: Gigabyte GA-MA78G-DS3H, AMD 780G, ATX
Processor: AMD Athlon64 X2 4800+ AM2 box "EE" 65W, 2x512kB
Coolermaster Centurion5 Schw. CAC-T05-UW ohne Netzteil
ATX BE Quiet! Straight Power 400 Watt / BQT E5
2x2048MB DDR2 Aeneon PC6400 CL 5, PC6400/800
DVD: LG GH20N bare schwarz (SATA-II)
HDD: Seagate Barracuda 7200.11 500GB SATA II ST3500320AS
View 4 Replies
View Related
Oct 28, 2010
I have a 40 gig external drive that I want to use for Linux. I want the complete install of Ubuntu 10.10 on it so that I can boot straight from there. I tried for hours to accomplish this. The instructions I saw for the issue were for an older version of Ubuntu, and the menus have changed since then. The furthest I got with the project is creating a bootable disk on my drive; it will boot from the drive, but not the full installation. It brings up the menu just like it was a live CD and gives you the options to either "Try Ubuntu" or "Install Ubuntu." I have installed it straight to the drive, but it will not boot from it. My computer does give me the bios option to select boot priority with USB external drives.
View 9 Replies
View Related
Apr 30, 2010
How can I be sure to complete the update?
Updating from 9.10 to 10.04 LTS with some 'stop'
new kernel not in use, and grub setup, using 'local'
the now new 10.04 LTS as it calls itself is loading and large parts working.
View 2 Replies
View Related
Mar 25, 2011
After I downloaded and installed the software "Aircrack" from the Synaptic Package Manager and restarted the PC, I still could not find Aircrack under Application or System. Can anyone advise me if I need to do more to complete the installation of Aircrack?
View 3 Replies
View Related
Feb 12, 2011
i am having a problem installing ubuntu 10.10. i had windows vista and used ubuntu inside windows with no problem. then, i wanted to reset my vista to its factory conditions (just to clean up space and get rid of hidden or unnecessary things) using the recovery disk - and the recovery disk partially worked, removed my os and didn't 'restore' anything. so i decided to just go all the way to ubuntu anyway, which was the plan all along, just sooner now.
i have the disk and i can easily make it to the 'try ubuntu' feature. however, when i try to actually install ubuntu, i make it all the way to the 'who are you page?' but the 'forward' button isn't accessible (which is how i noticed something might be wrong). this happens whether i try to install after trying ubuntu or if i try to direcly install without trying it first. i fill in the data, the installation says it's copying files, etc... and then, when it's done, it says 'ready when you are'. that's it. i can't click on 'forward', and none of the 'information about ubuntu' features and pics scroll by while the setup is taking place. i can't do anything at this point. the system isn't really frozen but it just does nothing. (i thought i might have to restart the computer but the only options i have are 'hibernate' and 'suspend'. also, once i manually restart everything it reloads all over again. when i take the disk out and restart, i see NOTHING. the vaio logo comes on, then the screen goes black and i see the cursor prompt but nothing else at all and i can't do anything at all.
View 5 Replies
View Related
Mar 3, 2011
I'm trying to install Ubuntu 10.10 on a computer that's already running Windows Vista. I used the Wubi installer and it seemed to go through the installation fine (using the desktop, amd64 iso file). After rebooting, I get the dual boot option. However, on Ubuntu start-up, I get a display with the message stating Verifying Installation Files. It seems to go through some verification, but then it gets stuck. I see a bunch of lines with the words "ubuntu ubiquity" with hexadecimal values and regular words. The last hexadecimal values to appear are: 7f2698c50d8e, 7f2698fca815; the last regular word is "_target".
If I quit out of the verification, I am able to get onto the desktop area, but a message appears stating a parted_server crash occured. Also, my wireless connection doesn't work, but I suspect I need to install a driver.
View 2 Replies
View Related
Sep 6, 2010
I'm trying to get my bearings in Fedora 13 (64-bit) in a virtual machine.I'm using the version with the Gnome DE.Now I'd like to install Koffice. But when I got to the package manager to select packages to install, I get a huge list of components to select for installation -- Kwrite, Kspread, Core support for Koffice, Libraries needed for Koffice, etc.Is there any way to select the version of Koffice that I want and have the whole set of necessary packages automatically be selected too?
View 3 Replies
View Related
May 10, 2013
I have downloaded the Wheezy DVD 1 and started the istallation process. The installation time is strangely very short in respect to the Squeeze release, anyway
The GRUB installation step fails. I terminated the installation without a bootloader and rebooted from DVD with the rescue boot option.
Now I asked for a console to try to manually install the bootloader but the following command:
# grub-install /dev/sda1
[where sda1 is my root partition]
gets the following message:
/bin/sh: grub-install: not found
What can I do?
View 14 Replies
View Related
Oct 26, 2010
I am trying to move my installation from my wubi drive to another drive, i use LVPM, but the listed partitions in LVPM, doesnt mention which partition is which , the available space in each partition is not listed, there are 5 partition in the MOVE section in LVPM, any clues of how to find out which is which, please urgent help, performance is not perfect with the WUBI installation.
View 1 Replies
View Related