I am running an openSuse 11.1 server.
How easy is it to install a complete Bugzilla system for my own internal use?
Is there an rpm that will set it up automatically?
Is it part of the distro? Or 11.2 or 11.3?
What is the easiest way to install it?
Since having installed Lucid Lynx, I have several complete system crashes a day, no matter which applications I am using. Lucid crashes without any error message and the system reboots. I have had no problem whatsoever with Karmic Koala (also switched from ext2 to ext4 when installing Lucid Lynx). Is there any probable reason for that or a workaround? Can I paste any logs here for anybody to figure out what might be going on? When I try XP which is also install, the system won't crash (so far...), so I don't think it's a hardware problem.
My system:
Mainboard: Gigabyte GA-MA78G-DS3H, AMD 780G, ATX
Processor: AMD Athlon64 X2 4800+ AM2 box "EE" 65W, 2x512kB
Coolermaster Centurion5 Schw. CAC-T05-UW ohne Netzteil
ATX BE Quiet! Straight Power 400 Watt / BQT E5
2x2048MB DDR2 Aeneon PC6400 CL 5, PC6400/800
DVD: LG GH20N bare schwarz (SATA-II)
HDD: Seagate Barracuda 7200.11 500GB SATA II ST3500320AS
How can I install linux using an external hard drive? ANy help would be greatly appreciated. I dont have any CD's or anything and this is my only option.
SO how can I install linux FROM my external HDD ONTO my internal HDD?
In the past month my root folder has become corrupted 3 times. General system restore doesn't help and installing the default kernel doesn't help. I don't expect a forum to be able to help with the corruption issus but is there any way to restore root without a complete re-install? It's a little time consuming.
View 7 Replies View RelatedI am going to install 11.3 on a system with a Phenom X6 and 16 GB memory.I'm now unsure whether to set up a 64 bit system or a 32 bit system with pae.Are they equivalent what concerns use of the complete 16 GB memory? I assume 64 would be more effective?On the other hand there seem to be less problems with the availability and/or installation of applications on a 32 bit system.
View 3 Replies View RelatedI just installed Fedora 12 and while I was trying to install Skype, there was a system crash and since then I cannot install any other software or cannot even access 'add/remove software'. Whenever I try to install a software or try to open the 'add/remove software' or, 'Software Updates' I get the message
'An internal system error has occured'.
and inside it contains this-
Code:
Traceback (most recent call last):
File "/usr/share/PackageKit/helpers/yum/yumBackend.py", line 2956, in __init__
self.repos.confirm_func = self._repo_gpg_confirm
File "/usr/lib/python2.6/site-packages/yum/__init__.py", line 717, in <lambda>
repos = property(fget=lambda self: self._getRepos(),
File "/usr/lib/python2.6/site-packages/yum/__init__.py", line 496, in _getRepos
self.conf # touch the config class first .....
I tried these using the terminal-
yum clean all
yum metadata
sudo yum clean all
yum clean metadata
and all of these gave me the same result-
Code:
Loaded plugins: presto, refresh-packagekit
Config Error: File contains no section headers.
file: file://///etc/yum.repos.d/skype.repo, line: 1
"su -c 'yum -y install skype' "
Everything else is working fine, but I just can not install or update any more software.
I have been running 11.2 32bit on my IBM T43 laptop without issue. Tonight I downloaded 11.3 32bit and installed to HDD. On reboot into new system laptop has complete freeze. Can not do anything but power off to reboot. I also found the same situation if I try to run KDE live off the cd. Oh yes, I downloaded the openSUSE 11.3 KDE Live CD version.
So here is what I found. On bootup (either HDD install or Live CD desktop) I will goto to tty1 or tty4 to see the boot up process messages. And it get right up to the login prompt without issue. If I then switch back to tty7 (the normal bootup display) after a few seconds the screen and laptop itself completely lockup (freeze). So I power off to reboot.
this time I boot up in tty1 again until login prompt but this time I type root to login. Then I switch to tty7 and now I can see the desktop. I goto the menu to search and load up Kinfocenter but then its freezes again.
So its very frustrating as I can not use this new version of openSUSE on my laptop. It just keeps freezing. Whats worse is I cant see any logs or screen message in tty1 because once it starts to login to desktop it freezes. So I am not even sure how to troubleshoot any further what the issue is. I assume its KDE4 or XOrg server.
I want to install Bugzilla on ubuntu 9.10
All the tutorials I found ask to install bugzilla from source.
Is installing from synaptic not advisable?
I have installed openSuse 11.2 in vmware that is a virtual box on win7 ,last time when I logged in I tried to change some desktop effects. [COLOR="rgb(0, 0, 0)"]When I again started suse , up to login screen everything was working fine. but after logging in I am getting a COMPLETE WHITE SCREEN and everything gets stuck ...
[/COLOR]
latest update to 11.3 a complete failure afterwards on reboot I'm instructed that I must first install kernel and to strike any key to exit which return me to grub menu. thats it for me and Osuse. 11.3 has been one bug after another and to much for me overcome. I will return once a day to see if anyone can fix this/
View 9 Replies View Relatedinstalling Bugzilla on CentOS 5.5 step by step? I want to learn how to install on my own pc, cause I will have to install it later on this semester for my professor.
View 2 Replies View RelatedI initially installed OpenSuse on my Laptops internal drive (clean formatted) and everything worked fine. Later I took out laptop's hard drive and put it into a USB enclosure to use as an external drive.
View 1 Replies View RelatedI use web server apache use php fastcgi (Centos 5.2, apache 2.2.9 , php 5.2.5 and fcgi-2.2.4 ). I receive error : "The server encountered an internal error or misconfiguration and was unable to complete your request. contact the server administrator, no-reply@zz.vn and inform them of the time the error occurred, and anything you might have done that may have caused the error. I view log :
[code]...
How to install Bugzilla 3.6 on Ubuntu Lucid 10.4 through the Advanced Packaging Tool(apt-get install) ???
View 4 Replies View RelatedI am using RHEL5 64 bit. I am trying to install bugzilla. While installing i am getting error.
View 2 Replies View Relatedi have a system that consist of fedora and xp which is dual boot configured, every thing is fine .when i tried to install deepofix mail server ,it prompted to select entire hard drive or existing partition(free space) when i selected option as free space, suddenly it showed "installation is complete reboot the system " yet i have to configure a lot more things such as network,ip,dns. i dont know what is the problem .Nothing is installed after that ,the same process repeats every time, when i try to install. Still i have 8gb free space in my disk
View 1 Replies View RelatedI didn't back up the blasted /etc/httpd stuff.
I do a "clean" root-only install; i.e., the only partitions that are formatted are the root and usr partition leaving the others untouched (so I don't have to restore the entire thing every time or fiddle with updating). That leaves almost everything in place with only a few edits and additions to make to get back in business; smart and dumb and the same time, sigh.
The partitions look like this for what it's worth:
Code:
Anyway, my web server comes up just fine and other applications work as expected except for Bugzilla and I can't remember what the heck it is I have to do to get it going again. I add a file, httpd-bugzilla.conf in the extra directory and include it at the end of httpd.conf:
Code:
In the above, /var/www/htdocs/bugzilla is not a symbolic link, Bugzilla is actually installed there (and has worked just fine for a long, long time). And, yeah, I know I'm not really supposed to do that but there it is.
I also run checksetup.pl which completes cleanly (it also sets permission masks and group) and double-check that localconfig looks like it ought to.
Seems like that ought to do it, but...
Code:
Since a few days i can no longer use my external hard drive (USB). During my quest i noticed the following things: Running openSUSE 11.2 / KDE 4.4.3 / single boot My internal HD is on /dev/sda2 (mounted /) partition manager (YaST) or gparted don't start up (they just hang during start-up) I had to change permissions suddenly to read a CD (i was not in de cdrom group, but i have been using CDs for a while)
Code:
> df
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/sda2 113306052 84757232 22793136 79% /
udev 2052352 4140 2048212 1% /dev
[Code]....
to start: I am a 100% linux virgin. I have yet to boot once. I have a 1TB external HD bought today (), which I formatted to 32GB Fat32 and the rest NTFS. (The 32GB partition is the second in order) I tried installing 11.4 with the full release DVD, and managed to get through the 'partition' part of the setup without raging about losing valuable internal HD data. I changed / to the 32GB partition, and figured a native format was safer: formatted it in setup as Ext4, and installed after ignoring the under 128GB warning (the machine is only a few months old).
The installation seemed to go well. The loadup was unsuccessful. There were plenty of "fails". I was given a command screen with "Login:" and after, "Password:". It seemed to take the Login, however the correct password echoed back a "Login module failed" or something similar. Interestingly, an incorrect password yielded a "Incorrect Login". What I may need to do (?):
1. I did not specify a /home or swap during install
2. ?
3. ?
etc
I am having some issues getting Bugzilla setup, I have the software on the server and am trying to get the pre-rec's setup.
I am using RedHat 4.1.2-42.
I have all of the required perl modules save one:DBD::mysql
When I try:
I get the following response(this is only an excerpt):
Can't test without successful make Running make install make had returned bad status, install seems impossible.
When I tried to upgrade via DVD I had numerous problems and most of them were fixed by installing with automatic configuration. My laptop is a Pavilion dv2000. I added on the bluetooth 2.1 Internal module and it worked perfect in 11.2.
Anyway, bluez won't start and the bluetooth hardware is not recognized by USB.
My system decided to crash on me, hard. It was humming along happily for about 2 months and now doesn't boot. If I boot from hard-disk, I get grub. Launching the first kernel choice hangs. I thought maybe the install was corrupt, so I booted from usb install disk. The usb hdd didn't boot; something about an error trying to access /dev/sda . Unplugging the internal disk and plugging in the usb install disk does result in the system booting. Plugging in the internal disk in a running system usb-booted system does not result in the system detecting the disk.
How do I know if the disk is physically broken? This seems unlikely since it does manage to launch grub consistently. Or is this still possible? How can I try to mount whatever is left? The usb install disk doesn't even list the /dev/sd*. Any pointers on how to reformat the drive if it's not being mounted?
My problem is that I need to move a moderately complex system from an old system to a new system. The old system is a core 2 duo running on an asus p5k-se (p35 chipset) M/B, Nvidia 8500 gt, 3 x sata II hard disks, 1 x sata dvd, 1 x ide hd, 4GB ram. It runs opensuse 11.1 kde 4 as a desktop system + samba server, apache server, database server + other non-opensuse software. In addition some of the opensuse software is not the default 11.1 versions as later versions were required. The nvidia driver is from the nvidia repo. There are several file systems, some under LVM.
The new system will be a core5 760, asus p7p55d-e M/b (p55 chipset), nvidia 240, 3 x sata II HD, 1 x sata dvd, 4GB ram and possibly 1 x ide HD. This M/B also includes USB 3 & sata III. I have no USB 3 devices but this may eventually change. I have no plans for sata III and believe that it may be better to attach any sata III SSD to the sata II bus.
What I would like to do is to move the hard disks from old system to the new system. What I would like to know is, if the system is left at 11.1, is the system likely to work with the new hardware. If the answer is no, if the system was upgraded to 11.3, would the transfer of the hard disks then work? In order to upgrade from 11.1 to 11.3 using the DVD i believe I should get rid of all non-default repos. I assume that I should also get rid of anything that was installed from them, e.g. the nvidia driver and any software versions installed manually outside RPM. Also is there any default 11.1 software that should be removed either before or after the upgrade to 11.3
I removed windows completely from my Dell Inspiron N5010 and installed Ubuntu 10.04.1 64bit. In windows I have the option to create the system image of system's current state so that if something goes wrong I could easily restore my system using that image( I am not talking about windows Restore facility). I wanted to know that if there is something available in Ubuntu also. I cant use Dell recovery media creator as I have deleted recovery partition. I have already used Remastersys and it also did its job well but after restoring my Graphics card driver did not work well.
View 4 Replies View RelatedI get a complete system failure when my CPU is stressed. It's not the temperature because when it crashes the CPU temp is only ~55 C. When it crashes the video freezes but the sound repeats itself. Example. I start handbraking a movie, then open a tv show in VLC. This is what I hear.
Did you get that tire - then it freezes
get that tire
get that tire
get that tire
get that tire
... etc
That continues until I reboot my computer. This crash is pretty reliable, as every time I load my CPU that happens. If I don't do anything CPU intensive, I don't get the crash. Also, if I only load up one core of my CPU, then everything is fine. However if I run something such as prime95 or handbrake (which both utilize all 4 of my cores) the computer will crash within 30 seconds.
Ubuntu 10.04
Corsair 750 TX PSU
AMD Phenom x4 @ 2.3 GHz
4 GB G.Skill 1066 DDR2 Memory
Nvidia GTS 250 1 GB edition
Biostar AMD 770 AM2+/AM2 Motherboard
Three HDs, two are WD of 1 TB and 120 GB, and a 32 GB SSD.
I'm on ubuntu 10.04, and pretty new to it - over the last 2 weeks I've done probably 10+ fresh installs due to me not knowing the system, trying things. I looked for a way to back it up and found this guide - [URL]. When I use the feature as listet, it doesn't exclude the folders, and the system is "almost" the same as pre-recovery - and I'm copy/pasting. Is there a way to make a COMPLETE replica of my system, that I can launch when failed, so that - it's back to when I was "ok".. like all programs install post-copy to be gone..
View 2 Replies View RelatedMy laptop running Ubuntu 10.10 had suddenly go to a dark gray screen that will not take any kind of input other than holding to power button down for 5 seconds. I'm not running any new or odd programs just Firefox, Openofice writer, and Pidgin. When I turn the computer back on I do not see any kind of an error message. I'm looking for any advice that will help me find the cause of the problem.
View 9 Replies View RelatedBeginning on the release day for Firefox 4, my system has been encountering hard freezes (no responsiveness to any key entry and only way to restart is by hitting the reset button). I had installed firefox 4 with no issue, but once it was open, it kept freezing my system. Some addons weren't supported anyways, so I uninstalled it and got back my 3.6. At the time I was using rtorrent, but within minutes of using it since the firefox install, my entire system freezes up.
Naturally I suspect HDD or RAM, but both have been extensively tested. Next I began browsing forums and found some tricks like turning off IPv6 or changing settings via HDPARM, but none have made any difference. I have moved on to using Transmission, and the problem still exists, but it occurs much less frequently.
I have also since then noticed that transfers of files from my 500GB OS/Torrent drive to my RAID 5 array and vice versa moves at 2-4MBytes/s, much too slow. So next I set up my torrent client to download directly to my RAID array, and lo and behold no freezes! Also, while transfering data the system moves at an absolute CRAWL, as in browser windows turning gray, saying that they have stopped responding, etc. I ran a fsck on my 500GB drive, which instantly told me my file system was clean. I'm at my whit's end here! I hate re-posting on a topic, but I feel like I've tried everything!
System Info:
Ubuntu 10.04 32-bit
Kernel 2.6.32-29-generic-pae
AMD Athlon 4450e
1GB RAM, 2.5GB Swap
Gigabyte GA-MA74GM-S2 Motherboard
[Code]...
When I try to shut my PC down (press the shutdown button in KDE 4.3.4), the desktop quits, but the console screen does not appear (the CTRL+ALT+F1 screen). Well, technically speaking it appears but only a still (not blinking) cursor is shown, otherwise the whole screen is blank. This means that not only the X freezes but whole system, because the keyboard is unresponsive too. It happend multiple times now, and every time I reboot after such event, some kde rc files (amarokrc, kmailrc, etc...) get deleted due to the automated filesystem check (unclean umount), which means that I have to reconfigure these apps again.
My home partition is on a separate EXT2 partition (this way I have full r/w access from winxp) and every time this is the only one which gets corrupted. The system partition (which is EXT3) is always intact (no fsck starts on boot). I'm using Debian Squeeze by the way.
I would like to find out how to back up a complete Ubuntu system, and then restore it on a clean harddisk.I have been running dual booting with Win XP until now. I am running Ubuntu 10.04, but have installed quite few add-on. I would like to make an Ubuntu-only machine now, with all the same apps still there, but dont want to go and download everything again. I am looking for a way I can back this entire Ubuntu installation up, and then restore it to a clean drive.
View 2 Replies View Related