OpenSUSE Install :: Apparmor Module Does Not Load On Kernel-rt?

Aug 6, 2010

I have just reinstalled OS 11.2 but this time the 64bit system variant. I installed the real-time kernel and saw that the apparmor module reported an error and wasn't loaded. I have never looked into apparmor and only knows it has something to do with security, and thus I wonder if it is important to do something with this issue? I plan to use the kernel-rt and have more or less always used a variant of this kernel flavour, often self built. Though I can not recall having seen that error before and I have not used a 64bit system before

View 2 Replies


OpenSUSE :: How To Recompiel The Apparmor Module

Sep 10, 2011

In case this is a thread in the wrong section please move it to the right one. Following situation applies.I am using openSUSE 11.1 with modified kernel. Code:# uname -aLinux linux-2c5j 3.0.4-41-desktop #1 SMP PREEMPT Sun Sep 4 18:51:01 CEST 2011 i686 i686 i386 GNU/Linux The compilation did run flawlessly with the SAKC script.However the module apparmor does not load. Infact:Code:# modprobe apparmorFATAL: Module apparmor not found. I understand that I have to recompile the module, right? There I have the first question: wasn't the apparmor module accepted into the kernel (and therefore should be already compiled and available with the normal kernel compile)? Or is this wrong. How can I recompile the apparmor module for my new kernel.

View 1 Replies View Related

OpenSUSE Install :: Failed To Load Module "fglrx" (module Does Not Exist, 0)

May 8, 2011

I've installed openSuse 11.4 server-mode (text only) on my desktop, and I'm trying to configure IceWM so i'll eventually have it set up so it always boots into text only mode, but I could be able to quickly start icewm via the command line.using Yast, I installed the Xorg server, and icewm.when I type X, the screen goes black and it just doesn't seem to do anythingI found if I hit ctrl+alt+f1 it kinda puts me back into text only mode, but I can't put in commands anymore. The last thing it says on the screen is:

Failed to load module "fglrx" (module does not exist, 0)

I've goggled that error message and the discussions that popped up around it made no sense to me at all. I've never configured X from scratch before, can someone point me towards a tutorial or something?

View 5 Replies View Related

OpenSUSE Install :: 11.2 From DVD - Load Kernel Operation Hangs At 97% (using Both Normal And Safe Kernel)

Feb 23, 2010

I am an experienced Linux admin and have been using SuSE for many years. My development machine has had every version of SuSE since '02 and although it is a little old, is in good working order. (AMD
2400, 2 gig RAM, 160 Gig IDE disks - SuSE on disk 2) (OpenSuSE 11.1 with the latest kernel works perfectly. This install is on a spare HDD prior to doing a full install on my usual HDD.)

When I try to install SuSE 11.2 from DVD, the load kernel operation hangs at 97% (using both normal and safe kernel), however, I can install from live CD without any problem. I have tried the same DVD on a few "older" machines and had the same problem. I initially thought it was the actual DVD but re-burning has the same problem. I have also tried another DVD writer - same problem.

View 1 Replies View Related

OpenSUSE Install :: While Checking Xorg.0.log Found I810 Module Is Failed To Load?

Dec 15, 2010

I have installed suse 11.2. Sometimes while using (firefox, okular, open office etc) x server restarts & comes to login screen. While checking Xorg.0.log i found i810 module is failed to load. Is this causing the x server restart?

View 9 Replies View Related

Debian :: Failed To Load Kernel Module

Jun 23, 2015

I'vd a problem with loading modules. Booting gives the this error:

Code: Select alllucas@debian8-1:~$ systemctl --failed
  UNIT                         LOAD   ACTIVE SUB    DESCRIPTION
● systemd-modules-load.service loaded failed failed Load Kernel Modules

LOAD   = Reflects whether the unit definition was properly loaded.
ACTIVE = The high-level unit activation state, i.e. generalization of SUB.
SUB    = The low-level unit activation state, values depend on unit type.

[Code] ....

Always the same error when booting. After a period of time, (Graphical User Interface) the mouse click no longer operates, also text input isn't possible.

I had no access to the system at all, even crt alt F1 stopped working, also text input was no't possible. so reinstall was the only option. Maybe there is a connection with this two errors.

I've reinstalled Debian 8 several times. Still, both errors stay.

The same happend again (in the GUI) is nothing possible, no txt input, no mouse click), but now I have access to the system, ctr/alt F1 is working.

View 12 Replies View Related

General :: Automatically Load Kernel Module?

Aug 6, 2010

I'd like openSUSE to automatically load a kernel module (e.g. libsas) at boot time even no device requires it. In Ubuntu, you would add the module name to the file /etc/modules. Is this the correct place for openSUSE as well?

View 1 Replies View Related

Ubuntu :: Load Scsi_mod Kernel Module?

Sep 2, 2010

xubuntu 9.10 I have a Drobo, sort of RAID storage device. It makes use of volumes of 2TB. Only the first volume (LUN) is shown up. According this information;[URL]... that happens if the scsi_mod kernel module is not loaded.

View 1 Replies View Related

OpenSUSE Install :: WPN111 Wireless Adapter And NETGEAR - Make The Module Load Automatically On Boot ?

Feb 14, 2011

Above adapter can be installed on v10.2 and 11.3 using ndiswrapper:-

1. Copy the 3 driver files from Windows:- like netwpn111.inf, WPN111.sys & ar5523.bin.
(Be carfeul about the exact names, because they have changed over time).

2. sudo ndiswrapper -i netwpn111.inf

3. sudo ndiswrapper -m

4. sudo modprobe ndiswrapper (the adapter should light up at this point and networks will be detected shortly after - see network manager). (Be careful of paths here - e.g. I had to use /sbin/modprobe - so 'whereis' may be necessary to find these commands).

2nd When I reboot, I need to run the modprobe command again. How do I make the module load automatically on boot? Also (and this is minor), can I bypass the KWallet, keyring thing? it seems silly to enter a password for the keyring and then click another password dialog, when I can just as easily enter the password for the network itself.

View 1 Replies View Related

Debian Configuration :: How To Load Own Kernel-module (KO) In Jessie

Mar 14, 2016

I built a kernel-module for a new usb wifi-card. This worked well and resulted in a 8821au.ko-file. But now I'm trying to load this kernel module since half an hour and it doesn't work. I copied the ko-file into /lib/modules/3.16.0-4-amd64/kernel/drivers/edimax. If I just type

Code: Select allsudo modprobe 8821au

I get a

Code: Select allmodprobe: FATAL: Module 8821au not found..

But if I enter the full path inside the /lib/modules/3.16.0-4-amd64-folder:

Code: Select allsudo modprobe -v ./kernel/drivers/edimax/8821au.ko

it seems to work:

Code: Select allbuiltin ./kernel/drivers/edimax/8821au.ko.

But lsmod doesn't show me the module after that.

I also added

Code: Select all./kernel/drivers/edimax/8821au.ko

to /etc/modules but this also doesn't seem to work. When booting I get an error-message, but it's too fast to read it and I can't find the right log-file, where the booting-part with the "[ OK ]"-messages is reported.

So my driver is ready, the onliest thing which I can't get working is loading it as a kernel-module.

View 3 Replies View Related

Fedora :: Unable To Load Kernel Module 'nvidia.ko'

Nov 29, 2009

im trying to install the driver for my nvidia GeForce 7300 GS.i have Fedora 12 installed in an Intel duo core 2 processor 64 bits.kernel installed is followed leigh's guide i did the 4 steps but after reboot screen goes blanck and X dont work.the log says:

-> Kernel module load error: insmod inserting './usr/src/nv/nvidia.ko'
-1 no such device

View 11 Replies View Related

Ubuntu :: Failed To Load NVIDIA Kernel Module?

May 11, 2010

My nvidia graphics driver was updated last night, and since then I've been unable to get into Gnome without resorting to low graphics mode. I have extensive knowledge of Windoze systems. Upon boot up, I get the following error:

(EE) NVIDIA(0): Failed to load NVIDIA kernel module!
(EE) NVIDIA(0): *** Aborting ***
(EE) Screen(s) found, but none have a usable configuration

I've tried some troubleshooting, including attempting to uninstall all nvidia drivers and reinstall (via synaptic).

Administration->Hardware Drivers reports that version 173 is installed loaded and active. Nvidia X Server Settings (nvidia-settings) gives me the "You do not appear to be using the NVIDIA X driver. Please edit your X configuration file (just run `nvidia-xconfig` as root), and restart the X server." error.

I've tried the nvidia-xconfig (both with gdm up and down) and it hasn't made any difference.

Oh, it's a GeForce 6200 wwith two Dell E193FPp monitors running on Ubuntu 10.04.

Here's my xorg.conf:

# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder75) Fri Mar 12 01:42:27 PST 2010
Section "ServerLayout"


View 9 Replies View Related

Ubuntu :: 10.04 - Failed To Load NVidia Kernel Module

Aug 8, 2010

My laptop broke beyond repair recently so I am stuck on a 6 year old hp pavilion zv5000 given to me by a friend and I thought I may as well give linux a go, I have been meaning to for years. I've installed xubuntu 10.04 as I heard it is less resource intensive than normal ubuntu but have been unable to configure the nvidia graphics card. I used the hardware drivers program which installed the nvidia accelerated graphics driver 96 (which was the recommended version) and then ran sudo nvidia-xconfig as instructed and got

Warning: Unable to locate/open X configuration file.
New X configuration file written to '/etc/X11/xorg.conf'

Which I presume means it worked correctly, but whenever I try to boot I get a message saying "failed to load nvidia kernel module", at which point I either have to restore the generic configuration or just start the session in low graphics mode. I have googled the problem and in a lot of peoples cases it seems to be linked to upgrading from a previous version whilst mine was a fresh install. I tried sudo modprode and it says the nvidia module isn't present. I tried installing the packages in synaptic which mentioned nvidia kernel modules but still no luck.

View 1 Replies View Related

Ubuntu :: 10.10 - Failed To Load NVidia Kernel Module

Feb 4, 2011

I am trying to fix my friends laptop and after the most recent upgrade she performed she got this error message when her laptop boots. Thing is that it stays frozen in that mode. I don't even see the grub boot loader. I know its the only operating system she has running on her laptop as well. The following error was encountered. You may need to update your configuration to solve this.

(EE) NVIDIA: failed to load the NVIDIA Kernel module.
please check your
(EE) NVIDIA: system's kernal log for additional error messages.
(EE) failed to load module "nvidia" (module-specific error, 0)
(EE) no drivers available
She is running ubuntu 10.10

View 5 Replies View Related

General :: How To Load A Kernel 2.6 Module With F Force Option?

Jan 21, 2010

I have a loadable module, simple enough I believe it should run on any 2.6 kernel. I want to force the load and test that assumption. How can I do it?

ismod does not seem to notice the -f in 2.7 modprobe has -f but cannot locate the module.No go. So I read the manpage for modprobe which says: modprobe looks in the module directory /lib/modules/'uname -r'.So I copied MYMODULE.ko to /lib/modules/2.6.(the only directory in here) and type: modprobe -f MYMODULE.ko.Still can't locate MYMODULE.ko.I notice there are no other .ko modules in that directory; so I go in deeper to kernel/drivers/char, guessing about the char directory, and copy MYMODULE.ko there.

View 1 Replies View Related

Software :: Failed To Load NVIDIA Kernel Module

Nov 26, 2010

So I just recently got my proprietary driver working yesterday (and enjoyed too many hours of Starcraft 2 afterwards) but today after I downloaded an Update Package and rebooted, it's telling me that it "Filed to load NVIDIA kernel module".So now I'm back to square one, I had to restart in the lower graphics mode or whatever it's called prior to logging in.When I go to System - Admin - Hardware Drivers, nothing shows up and it says no proprietary drivers are in use on this system.

When I try to change the resolution under System - Preferences - Monitors (since everything is so big) I get "It appears that your graphics driver does not support the necessary extensions to use this tool. Do you want to use your graphics driver vendor's tool instead?" I select "Yes" and I get "You do not appear to be using the NVIDIA X driver. Please edit your X configuration file (just run `nvidia-xconfig` as root), and restart the X server."I'm a total loss here, I'm assuming something from the update package has caused everything to go haywire and I'm hoping that if/when I get this fixed I don't have to keep doing this fix every time I use the Update Manager.I'm still fairly new to this whole Ubuntu thing, so any step-by-step instructions would be appreciated

View 6 Replies View Related

OpenSUSE Install :: 11.2 (64bit) - Kernel Module Will Not Start In Vbox

Jan 23, 2010

I Just loaded 11.2 64 bit, initially the kernel was "default", however, after I installed my Nvidia drivers it changed to desktop, I'm not sure I understand? In GRUB my screen lists it as desktop. Is "default" somewhere? Was it replaced? Things seem to be working alright in most cases although I'm having inordinate problems with "virtual Box" and Vmware server. In Vbox the kernel module won't start.

View 7 Replies View Related

OpenSUSE Install :: Kernel Upgrade On 11.1 - Cannot Find Module After Reboot

Nov 10, 2010

I've upgraded kernel to on openSUSE 11.1. Before I tried to upgrade to where I encountered the same issue. After reboot it can not find the modules for which puzzled me to no end. Now I have found that the /boot which is on separate partition of ext2 type is not mounted. The mount command does not recognize ext2 and xfs anymore.

Clearly the initrd does not have the right modules. Since this is standard zypper up process I would expect this to work without issues since it has worked until the kernel without issues. Has something changed with the last 2 kernel versions that requires some extra actions from me and if so what do I have to do.

View 1 Replies View Related

Fedora :: Updated Kernel / Now Nvidia.ko Module Doesn't Load

Feb 26, 2010

I think I know quite well what my problem is. However, I'm still too much of a newbie to know how to solve it.My problem: I no longer get a login screen on my server after I ran a yum update which updated my kernel (thank god, vnc server still works).Cause: During startup Fedora complains that it can't load the module nvidia.ko. Reason: The module doesn't match the current kernel.

View 5 Replies View Related

Fedora Installation :: How And When To Load Kernel Module In Boot Up Process?

Jul 19, 2010

For a diskfull node (the OS installed in a disk), I can use the 'insmod' command to insert a kernel module into the kernel. And after the reboot, the module is still in the kernel. I have a question here: how, when and which kernel module will be loaded in the boot up process for a diskfull node?And for the diskless node, can I use the chroot or some other ways to install the kernel modules into ramdisk, so that kernel module can work when the diskless node boot up? I think it needs certain mechanism to load the kernel like the boot up of diskfull node.

View 8 Replies View Related

Ubuntu :: ERROR: Unable To Load The Kernel Module Nvidia.ko

May 16, 2010

for the last few releases, starting with 9.04 i've been having serious crashing problems with the nvidia driver. whether i installed it manually using the latest drivers directly from nvidia, or installing them through the restricted driver option. after a few hours CRASH. it's been awful. and i tried everything from this side to the moon to fix this issue, all to no avail. no idea why i've even stayed with ubuntu after all these issues. came from the debian world back in 5.04, and almost moved back a few times. but i did a clean install of 10.04, and thought i'd give the nvidia driver one last chance... if it didn't work i'd be moving back home to debian (with the suspicion the issue would stay).

so after i tried the restricted driver and CRASH. nothing to fix it. then i thought ok i'll try to use the latest driver from nvidia. but ran into this error when installing it:

Quote: ERROR: Unable to load the kernel module nvidia.ko. This happens most frequently when this kernel module was built against the wrong or improperly configured kernel sources, with a version of gcc that differs from the one used to build the target kernel, or if a driver such as rivafb/nvidiafb is present and prevents the NVIDIA kernel module from obtaining ownership of the NVIDIA graphics device(s), or NVIDIA GPU installed in this system is not supported by this NVIDIA Linux graphics driver release. so after googling around i found a fix to this error i was getting during the install:

Quote: sudo nano /etc/modprobe.d/blacklist.conf

blacklist vga16fb
blacklist nouveau
blacklist rivafb
blacklist nvidiafb
blacklist rivatv


View 5 Replies View Related

Ubuntu Multimedia :: Module Nvidia Failed To Load With Kernel 2.6.32-33

Jun 7, 2011

I am using Ubuntu 10.04 LTS.With the last update, I have installed the kernel 2.6.32-33.And I have the message "module nvidia failed to load" in Xorg.log.0 My "current" nvidia module is 195. I have tried without success to reinstall nvidia. What I must do ? Wait for a new update of nvidia ?

View 3 Replies View Related

CentOS 5 :: Can't Install Nvidia Drivers (Unable To Load The Kernel Module "nvidia.ko")?

Jul 28, 2009

So I have been trying to install these drivers forever and after going through a million forum posts and Google searches I have been unsuccessful. The process I have been trying starts as such: I hit ctrl-alt-f1 and then login as root. i then change to run level 3 by doing /sbin/init 3. After that's done I cd to desktop and do sh --kernel-source-path /usr/src/kernel/2.6.18-128.2.1.el15-i686

If I don't give it the source path it can't find the source tree. Eventually I get the error: ERROR: Unable to load the kernel module 'nvidia.ko'. This happens most frequently when this kernel module was built against the wrong or improperly configured kernel sources, with a version of gcc that differs from the one used to build the target kernel, or if a driver such as rivafb/nvidiafb is present and prevents the NVIDIA kernel module from


View 5 Replies View Related

General :: Install Module U32 Into The Netfilter Module For Kernel 2.6.27

Jan 30, 2011

I need to install module u32 into the netfilter module for kernel 2.6.27.

I did not see the source code in the kernel version I have. where can I find the code for U32 module.

I have checked "" and looks like POM is discontinued. Is the u32 module committed to kernel version 2.6.27 or need to patch it. If yes, where can I find the patch?

I building the kernel for a MIPS processor.

View 3 Replies View Related

Debian Configuration :: Kernel 2.6.32-trunk Won't Load The Dkms Module And Virtualbox Will Not Run

Jan 22, 2010

My problem is that it won't load the dkms module and Virtualbox will not run.

View 14 Replies View Related

Ubuntu Multimedia :: Failed To Load Nvidia Kernel Module In Lucid

Oct 15, 2010

I am running my PC on Lucid. It has been working fine, but suddenly the other day I got an error message when booting, saying that Nvidia kernel module failed to load. I had to boot in low graphics mode. The only thing i can think of that had changed is that I had recently upgraded to latest Linux kernel 2.6.36-25.I have tried carefully following tips on numerous threads on this forum and others, but still no go. I have purged nvidia drivers and reinstalled nvidia-current (also tried nvidia-glx-185). However, when I then do <sudo modprobe nvidia>, I get this message:

WARNING: All config files need .conf: /etc/modprobe.d/lrm-vide, it will be ignored in a future release.
WARNING: All config files need .conf: /etc/modprobe.d/blacklist, it will be ignored in a future release.
WARNING: All config files need .conf: /etc/modprobe.d/bad_list, it will be ignored in a future release.


When I go to System>Administration>Hardware Divers, it shows Nvidia-current as present but not currently activated.I have blacklisted vga16fb and nouveau in blacklist.conf, done <sudo nvidia-xconfig> etc.I am at a loss as what to do next, and am still new enough to Linux to not be in a position to fiddle to try fix it myself.

View 1 Replies View Related

OpenSUSE Install :: Boot.preload Complains About The Missing Preloadtrace.ko Kernel Module?

Nov 23, 2009

I've built my own kernel and now boot.preload complains about the missing preloadtrace.ko kernel module.

Where can one find the source for this module?

View 1 Replies View Related

OpenSUSE Install :: How To Load Kernel

Apr 17, 2010

Following a zypper dup and turning my computer off for a few hours; when I rebooted, I got a message saying, "error: you need to load the kernel first press any key to continue . . . " And then it goes back to the grub menu for of the same if I select openSUSE 11.2.SystemrescueCD won't boot it. I've tried to "repair installed system" and "rescue" with my openSUSE 11.1 DVD -- it won't even acknowledge (as it were) the presence of 11.2 or the system on the other hard drive (though it does recognise the partitions).The PCLinuxOS 2009 KDE and GNOME live CDs will redo the MBR of installed systems (at least, as far I know, PCLinuxOS is one of systems). In my experience, the 11.2 live CD won't. I was hoping the 11.1 DVD would. What to do?

View 9 Replies View Related

OpenSUSE Install :: Kernel Load Live CD Then Blank Black Screen?

Mar 18, 2011

Apology for dual post I realized was in wrong place.Created verified 11.3 live CDInserted, restarted, welcome screen, choices next, I choose installation.Kernel loaded then black blank screen guess you call it a freeze upWindows 7 Home Premium 64-bit Edition Partitioned plenty room

View 9 Replies View Related

OpenSUSE :: Kernel Module / Building VirtualBox Guest Additions Kernel Modules - Failed?

Feb 10, 2010

I installed openSUSE 11.2 on virtualbox. My host is windows 7. I tried to install the guest additions, but i get an error saying

Building VirtualBox Guest Additions Kernel Modules...Failed
(Your system does not seem to be set up to build kernel modules)

How should i go about to let my system build kernel modules?

View 7 Replies View Related

Copyrights 2005-15, All rights reserved