Ubuntu Multimedia :: Sound Kernel Module Is Loaded, But Doesn't Works ?
Mar 30, 2010
I've Ubuntu 9.10 with 2.6.31-20 kernel.Sound kernel module is loaded, but doesn't works ;((. I have not got any errors and all programs (e.g. mplayer) thinks that sound driver is present and works OK but I can't hear a sound...A part from lspci -vvnn
Code:
01:00.1 Audio device [0403]: nVidia Corporation Device [10de:0be3] (rev a1)
Subsystem: Sony Corporation Device [104d:9067]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-[code]....
View 3 Replies
ADVERTISEMENT
Jun 25, 2010
I get this error message with KINO.
WARNING: raw1394 kernel module not loaded or failure to read/write /dev/raw1394!
View 9 Replies
View Related
Sep 9, 2010
I installed VirtualBox-OSE and VirtualBox-Kernel from the Slackbuilds at slackbuilds.org.When I start VirtualBox I get the following message on the CLI: Code: WARNING: The vboxdrv kernel module is not loaded.Either there is no module available for the current kernel (2.6.33.4-smp) or it failed to load.Please recompile the kernel module and install it by sudo /etc/init.d/vboxdrv setup.You will not be able to start VMs until this problem is fixed.I gave /etc/rc.d/rc.vboxdrv executable permissions, and then ran.The only issue is, I have to do this each time that I reboot, should I add 'modprobe vboxdrv' to one of the startup scripts or is something else wrong?
View 7 Replies
View Related
Dec 22, 2010
im doing a school assignement and i cant find any info about this anywhere. How do i make sure that a module is loaded into the kernel upon boot?
View 2 Replies
View Related
Jan 18, 2011
After much tiddling'n'fiddling I finally got my new Linksys WUSB600N v2 working. Contrary to many posts, mine did NOT work with either the standard rt2870sta module, nor the updated version from the driver:wireless repo. Also the rt2870 version from the ralink website didn' t work. After a days worth of Googling I came across this post. The bottom line?
1. Download rt3572 from the Ralink website.
2. Add {USB_DEVICE(0x1737,0x0079)}, /* WUSB600N v2 */ to common/rtusb_dev_id.c
3. Follow README_STA
I did not install firmware packages. And be sure the rt2800sta module doesn' t get loaded. (you could just remove it, I suppose.)
View 9 Replies
View Related
Dec 5, 2014
I have an nvidia card and a motherboard with an internal sound card.
The nvidia card hogs alsa, and it's really obnoxious because I don't use hdmi for audio (or video, for that matter, crt all day)
I would normally just blacklist the module that the card is using, but I hit a hiccup...
This is the readout for the gfx card from lspci -v
Code: Select all01:00.1 Audio device: NVIDIA Corporation Device 0fbc (rev a1)
Subsystem: ASUSTeK Computer Inc. Device 84bb
Flags: bus master, fast devsel, latency 0, IRQ 25
Memory at fe080000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [60] Power Management version 3
Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+
Capabilities: [78] Express Endpoint, MSI 00
Kernel driver in use: snd_hda_intel
And this is the readout from the motherboards internal audio card
Code: Select all00:14.2 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 Azalia (Intel HDA) (rev 40)
Subsystem: Gigabyte Technology Co., Ltd Device a132
Flags: bus master, slow devsel, latency 32, IRQ 16
Memory at fe500000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Kernel driver in use: snd_hda_intel
Since they have the same kernel module, all the internet advice is pretty much moot, because I can't figure out how to effectively shut off one without killing the other as well. Huge PITA.
View 1 Replies
View Related
Aug 8, 2010
I have installed Virtualbox PUEL in 64-bit 11.3. This is a fresh install. My computer has an onboard nvidia 8300GS graphics card. I do not think this is related to the issue. I added the virtualbox repository and installed the program via yast. when I type "VirtualBox" in the terminal I get the following output:
[code]...
View 4 Replies
View Related
Aug 3, 2010
Used to work perfectly. I attempted to install VPN client, result is can't connect to anything. Networks are seen by network manager, nothing happens when click connect. Results below:
Wireless LAN present in Hardware information. Atheros AR242x 802.11abg Wireless PCI Express Adapter (wlan0)
Kernel Driver: ath5k
168c:001c
/var/log/boot.msg
[code]....
Advice is to use output of dmesg command to find problem, but as above I don't get any results for this in terminal.
attempt to ping external site
linux-cfi6:~ # ping -c 66.70.73.150
Usage: ping [-LRUbdfnqrvVaA] [-c count] [-i interval] [-w deadline]
[code]....
View 1 Replies
View Related
Jun 4, 2015
I am runnig Jessie with the default GNOME. Every thing has been perfectly smooth, but for the audio line in. First you should now the same hardware was working well with Wheezy. Then the hardware card is RealTek ALC887-VD and I am using the analogic part (both for in and out lines).
Below I will write some command results, but first, it seems important to describe the problem. I can hear the audio line in. If I blow in a mic, I definitelly hear the sound of it in the output. With alsamixer I can toggle the line in level and it works fine. By the way, with pavucontrol, it is the same I have access to the line in. but when I look in the Gnome setting for the sound, input, no card is available, then no volume setting is available.
--> as a result, I can't record the sound from the mic. it is sent directly to the output without been taken into account in the system. So no comment on video making, no skype …
On the web, the problem is always "no sound with this card" "No sound after upgrade to Jessie"… but Card is working fine but no seen on a upper level…
Code: Select allroot@Desktop:~# lsmod |grep snd
snd_hda_codec_realtek 67127 1
snd_hda_codec_generic 63142 1 snd_hda_codec_realtek
snd_hda_codec_hdmi 45118 1
snd_hda_intel 26327 12
[Code].....
View 1 Replies
View Related
Dec 21, 2009
Sound disappears as soon as I try to use an application e.g. News Video Fox, CNN, BBC or playing a video disk or cd disk, and a kernel module crash is reported (listed below from logs) After this happens no sound, and the desktop freezes (X11 only Linux is fine). Restarting X obviously do not solve the problem.
It seems that Fedora 12 has sever problems with Intel Sound cards.
I guess it is not really a Kernel developers problem but more the authors for the sound module causing the crash. I already reported it through the popup to "kernel-oops" by clicking on the "black screen" popup reporting the crash on FC12.
Here follows the logs containing the crash info.
WARNING: at sound/pci/hda/hda_intel.c:565 azx_send_cmd+0x36/0x1df [snd_hda_intel]() (Tainted: G W )
Hardware name: Macmini2,1
BUG?
[Code]....
View 2 Replies
View Related
Nov 6, 2010
I have installed xubuntu version 10. My sound card is a Yamaha dS-1S, and seems to be properly configured. Alsa mixer doesn't indicates any error. However, I can't manage to get any sound. I have checked that jacks are correctly plugged.
View 4 Replies
View Related
Feb 26, 2010
I think I know quite well what my problem is. However, I'm still too much of a newbie to know how to solve it.My problem: I no longer get a login screen on my server after I ran a yum update which updated my kernel (thank god, vnc server still works).Cause: During startup Fedora complains that it can't load the module nvidia.ko. Reason: The module doesn't match the current kernel.
View 5 Replies
View Related
Jul 5, 2011
Running Compiz as a standalone WM.Managed to get Slim working, will post how later, but have no sound. If I boot using gdm3 the sound works. Obviously gdm3 loads something Slim doesn't, but can't workout what!Tried adding /usr/bin/pulseaudio --start --log-target=syslog & to my script - no dice, still no sound
View 2 Replies
View Related
Sep 8, 2011
I can play sound files with aplay, esdplay, and vlc, but I don't get any sound from iceweasel and chromium.
I installed a squeeze base system (without gnome and without the standard system utilities), then added (using --no-install-recommends) xserver-xorg-core, xdm, fluxbox, alsa-base, alsa-utils, alsa-oss, iceweasel, chromium-browser. Here I checked for sound and there was none from the browsers. I have since installed vlc, esound-clients, alsaplayer-esd, gstreamer0.10-alsa, and other software that didn't look sound-related and didn't change the symptoms.
Setting ICEWEASEL_DSP to "aoss" or "esddsp" doesn't help. Neither does "chmod -R 777 /dev/{audio,dsp,midi,mixer,snd}". snd-pcm-oss and snd-mixer-oss are loaded. Both my account and root are in group "audio". Running the browsers as root doesn't help.
This is the output of chromium:
In case it makes any difference, all of this happens in a qemu-kvm virtual machine with an emulated es1370 soundcard. Same with sb16 soundcard.
I would prefer not to install everything vaguely related to sound in the repositories in the hope of things fixing themselves. That's just ugly, plus I have only 200MB free space left.
View 1 Replies
View Related
Mar 17, 2010
I am using Ubuntu 9.10..My sound works fine unless I have headphones plugged in. I've tried 2 sets of headphones, and it doesn't work with either set, so it's not the headphones. The volume is not muted (it's at 100%) for the headphones either in alsamixer. How can I diagnose and fix this?
View 8 Replies
View Related
Jun 14, 2010
been running Lucid & Karmic for a while now, after an update last week (with kernel) & reboot sound no longer works.Results of 'sudo aplay -l':
Code:
**** List of PLAYBACK Hardware Devices ****
card 0: NVidia [HDA NVidia], device 0: ALC888 Analog [ALC888 Analog]
[code]....
View 3 Replies
View Related
May 1, 2010
I have upgraded to Ubuntu 10.04. The upgrading process went fine but i have some problems now. Firstly, in the tray icon space i don't have sound tray icon and the Ubuntu One icon neither. Moreover, the Firestarter doesn't works and says that probably i don't have internet connection though the internet works fine.
View 2 Replies
View Related
May 8, 2011
I've been trying to get my HP dc5750 computer to produce sound, but so far there hasn't been any joy.That is until today! I found out that there isn't a sound module for the card that is in the computer. I know that is no reason to be happy, but at least now I know the reason why the sound doesn't work.My sound card is an HBA ATI SB.How do I go about finding a sound module?If that module can be found, how would I go about installing it?I'm new Linux and don't know anything about programming.
View 5 Replies
View Related
May 2, 2011
I have a sony laptop VGN FS315M, i recently installed Ubuntu 11.04, and i really love the unity interface.
But i have a few issues as well:
1. Vaio FS315M has Nvidia graphics card, ubuntu suggested a video card driver which i installed but didn't work well so i switched to the another one and it worked generally well but that too has problems like if my computer goes to sleep upon closure of lid, it cannot wake up again. it shows only a white screen and only way to get out of it is to restart the computer by manually pressing start button.
2. Sound card works generally ok but mic doesn't work on startup but when i click sound preferences and mic selection from analog microphone to another one and then again to analog microphone, it works but not the first time. Sound output is low compared to windows.
3. Arabic/persian fonts generally are not shown well in firefox?
4. Computer seems to be slow in unity compared to 10.10, may be because of high demand on graphics or the graphics card is not optimized?
5. Skype won't start automatically and there's no option in this skype to do so and also it doesn't save password?
6 . Ubuntu doesn't connect to net connection unless i connect manually, i want it to connect automatically to internet
7. This issue is not related directly to ubuntu. My system is a dual boot system with windows xp as well. Before windows xp, i tried windows 7 beta and then later removed it but it left its bootloader at startup. since my CDROM drive is also out of order so i tweaked BIOS by installing PLOP to install ubuntu. Now i have 3 startup menus if i want to run windows xp, one for ubuntu, then windows 7 with option for earlier version, when i select earlier version then windows xp or PLOP installer. so its a mess. I want PLOP to appear at the beginning (so that i can have boot option from USB available), then ubuntu and if i select windows it should go directly to xp not thru others.
View 1 Replies
View Related
Oct 29, 2010
When I started using Slackware I've been using USB headset. Everything ran perfectly fine. They got recognized, I could use all of it's functions and so on. Unfortunately volume control on them stopped working so I had to service them, and like in every third world country, yay I need to wait minimum three weeks just so they can press a button and say "Yup, they don't work".
I bought normal headset to use them while other one is getting fixed, and didn't expect any problems with them considering they are "old" technology, normal audio input and output.
Now problem is following, sound works fine but microphone doesn't. Once I managed to "fix" it by switching audio input from mic to something else and then back to mic, now even that doesn't work. Another... "problem" is if I leave my USB webcam plugged in while booting computer, there is no sound at all, ether on line ones or USB ones but I can easily solve that problem by unplugging webcam, rebooting and plugging it back in later.
Now everything ran fine until my computer shutdown while I was sleeping. Don't know why, but it started happening recently, don't see anything smart in logs so I assume its... something, read it could be cache, HDD, temperature and so on but since logs don't write down anything smart... will deal with it some other time.
When I talk I can actually hear myself on the headset, which probably means that they work. If I put mic boost all the way up, I can hear myself perfectly clear, but somehow... seems that that information just doesn't get to Slackware, well it gets somewhat considering that it reacts to me adjusting mic boost on KMix, but everything else... no.
Arecord doesn't record anything, TS register as microphone isn't plugged in at all, skype doesn't get any input ether.
Code:
View 1 Replies
View Related
Aug 17, 2010
I have had this error for way too long. This post will be done in parts. I've had it for months now and I'd like to solve it. Every suggestion on linux forums, ubuntu forums, or some XYZ-linux blog seems to either work for just one boot or none at all. since I have updated my kernel on several occasions, I have also re-installed my NVIDIA kernel module by downloading the run file from NVIDIA's website. It also follows instructions from this post. I have installed the linux header files and the xorg-dev files from repository
I have also tried this.
My hardware (Alienway m17x - VGA compatible controller: nVidia Corporation GT200 [GeForce GTX 260M])
Code:
00:00.0 Host bridge: nVidia Corporation MCP79 Host Bridge (rev b1)
Flags: bus master, 66MHz, fast devsel, latency 0
00:00.1 RAM memory: nVidia Corporation MCP79 Memory Controller (rev b1)
Flags: bus master, 66MHz, fast devsel, latency 0
[Code].....
View 3 Replies
View Related
Sep 29, 2010
Problem: computer and graphics card had been running for months without problem. For some reason, last night, things locked up...wouldn't think it's related, but happened when I noticed I was locked out of creating new folders on my usb attached My Book storage drive. So, from terminal I tried to sudo change permissions to read/write. Everything locked up. Now, every time I reboot it states needing to use low graphics mode "Screen, graphics card, and input device settings could not be detected correctly."
When I check the error log I see: "(EE) Failed to initialize the NVIDIA kernel module.."(EE) NVIDIA(0): ***Aborting* Screens found but none have a usable configuration. Fatal Server Error - no screens found"
If I try to then start in safe low graphics mode or restart X, I get the Ubuntu splash screen with the 5 dots that turn red to show progress...but nothing ever happens. I can switch to VT 1, login at command line, and type "startx" and then the graphical desktop loads just fine. Video playback, etc. is perfect and fine - not in low graphics mode at all. System seems totally normal.
However, I have to go through these steps each time I reboot. Also, I noticed that when I try to boot from Ubuntu Live CD I can't. I get as far as picking English as a language, then screen goes blank and goes to power saving mode (no signal being sent). This greatly concerns me as even though I have a work around for now - getting to command line then startx'ing - if I ever needed to reinstall from the CD, it seems I can't.
Some info on my pc:Running 10.04 on Compaq Presario SR1950NX AMD 64 GeForce 6150 LE/PCI/SSE2/3DNow! <- believe built onto motherboard on what I can do to fix? Is this a sign that something is wrong with my video card?
View 3 Replies
View Related
Feb 26, 2011
before i get a lot of annoyed responses, I did check the forum and found a couple older previous threads on this topic, but they don't seem to really explain any real solutions to the problem im having.Here's the story- I was looking around for instructions and found this "howto guide" on installing nvidia display driver [URL]I went through the steps he listed:
downloaded the driver packages, install the dependencies from the shell, and then i pressed CTRL+ALT+F2 to get out of X and into text mode. I stopped my gdm with the command: sudo /etc/init.d/gdm stopand then i tried to install the driver using: sudo sh (on my NVIDIA driver- his version was a bit outdated compared to the one I downloaded)But here is where the problem starts, as I go through the installation process and click yes, i reach the "progress bar" then the screen says "unable to build the NVIDIA kernel module". and then it just exits. What is going on here? Am I missing some other package or file?
View 1 Replies
View Related
Jun 7, 2011
I am using Ubuntu 10.04 LTS.With the last update, I have installed the kernel 2.6.32-33.And I have the message "module nvidia failed to load" in Xorg.log.0 My "current" nvidia module is 195. I have tried without success to reinstall nvidia. What I must do ? Wait for a new update of nvidia ?
View 3 Replies
View Related
Aug 24, 2010
I am trying to see if a module that i loaded on Redhat succeeds.The module is from intel called vtune_drv-x32_64-2.6.18-194.el5smp.ko.When I run the script during the installation process, it shows that it is successful.Is the "0" at the end of line meaning that the module is not successfully loaded?
View 2 Replies
View Related
Oct 15, 2010
I am running my PC on Lucid. It has been working fine, but suddenly the other day I got an error message when booting, saying that Nvidia kernel module failed to load. I had to boot in low graphics mode. The only thing i can think of that had changed is that I had recently upgraded to latest Linux kernel 2.6.36-25.I have tried carefully following tips on numerous threads on this forum and others, but still no go. I have purged nvidia drivers and reinstalled nvidia-current (also tried nvidia-glx-185). However, when I then do <sudo modprobe nvidia>, I get this message:
WARNING: All config files need .conf: /etc/modprobe.d/lrm-vide, it will be ignored in a future release.
WARNING: All config files need .conf: /etc/modprobe.d/blacklist, it will be ignored in a future release.
WARNING: All config files need .conf: /etc/modprobe.d/bad_list, it will be ignored in a future release.
[code]....
When I go to System>Administration>Hardware Divers, it shows Nvidia-current as present but not currently activated.I have blacklisted vga16fb and nouveau in blacklist.conf, done <sudo nvidia-xconfig> etc.I am at a loss as what to do next, and am still new enough to Linux to not be in a position to fiddle to try fix it myself.
View 1 Replies
View Related
Mar 15, 2010
I have no problem playing all videos and sound files. I have installed most codecs and propriety software. I can play all downloaded .flv videos from all the sites except one. When I open the .flv file from this site, I get "internal data stream error."
View 2 Replies
View Related
Mar 24, 2010
I have Ubuntu 9.10. Clean install. I have a cheap headset but can't get sound to come thru the headset. The mic works, but sound only comes from main speakers.
I do not have a HP, SONY or anything like that. I bought my pc barebones and built myself. So there doesn't seem to be any easy fix for my pc. Here are the specs:
Gigabyte MB model# GA-M61SME-S2 code...
View 9 Replies
View Related
Jul 8, 2010
Since upgrading from 9.10 to 10.04 sound now only works some of the time. One boot it will work perfectly and another boot it wont, the gnome sound mixer basically says that it can't detect a sound card.
I've compared lsmod when it does vs doesn't work and I've noticed...
Working:
Code:
Not working:
Code:
So it seems like the driver/module isn't detecting or initialising my card on some boots.
View 7 Replies
View Related
Jan 8, 2011
I have a Zotac Mag Atom computer with Nvidia ION graphics. This computer i use as a HTPC hooked up to my 42" LG flatscreen via HDMI. The problem i have is that after have installed de correct graphics drivers the graphics chip only sends picture over HDMI whilst there allso is going sound.
View 2 Replies
View Related
