OpenSUSE Install :: Fatal - MBcache And Ahci Module Not Found
Nov 30, 2009
I am using openSuSE 11.2 on a VGN-AR41L. I have also erased the preinstalled Home Vista (what a pleasure). Now to my problem. My system boots correctly but if I press the <ESC> key while booting I can see the following messages:
"Doing fast boot
FATAL: mbcache module not found
FATAL: ahci module not found
"
and the boot process continues normally.
Why this happens? Does this mean that I have a problem that I haven't discovered yet? Is it something that I can ignore? I am using SUSE Linux from version SUSE Linux 8 personal and although I am not a power user I have done my two desertions on this system and I am very happy with SUSE. I have bought SUSE Linux 8 Personal and SUSE Linux 10 all the other versions until today have been downloaded.
I've updated my openSUSE 11.1 to 11.2 using installation DVD. After that, as system boots, I started to get lines like:
Code: FATAL: Module jbd not found FATAL: Module mbcache not found FATAL: Module ext3 not found and so on with different modules.. and this exact string several times:
Code: WARNING: All config file need .conf: /etc/modprobe.d/tv, it will be ignored in a future release. Finally I get:
while booting with bootsplash turned off there's a message "FATAL: Module ata_piix not found FATAL: Error running install command for ata_piix" .Though everything works fine i'd like to know what does this message mean and is there a way to disable loading of ata_piix whatever it means.
I downloaded the new Catalyst Package from ATI [URL] and I don't know what happened. Installed fine restarted. It starts loading fine then screen flickers like crazy Gnome Desktop won't load. Kicks me over to console type log in. Starting vmtoolsd FATAL : Module vmmemctl not found. gdm[1586]: WARNING: GdmDisplay : display lasted 2.12 seconds Gdm[1586]: WARNING: GdmLocalDisplayFactory: maxium number of X display failures reached: check x server log for errors. I type StartX and is states (ee) fglrx(0): iregl_setsuspendresumestate FAILED -9. Is it going to happen with every computer running 11.3?
On startup I get the following message: Code: Applying Intel CPU microcode update: FATAL: Module microcode not found. OK ERROR: Module microcode does not exist in /proc/modules Selfmade Kernel:
Code: [toby@sarah ~]$ cd /usr/src/kernels/linux [toby@sarah linux]$ cat .config | grep -i microcode CONFIG_MICROCODE=y CONFIG_MICROCODE_INTEL=y # CONFIG_MICROCODE_AMD is not set CONFIG_MICROCODE_OLD_INTERFACE=y
Code: [toby@sarah linux]$ rpm -qa | grep -i microcode microcode_ctl-1.17-1.53.fc12.1.x86_64 I found few links, saying that this is a Xen problem but I have no Xen.
This is the error I am getting: bert@mybook:~$ modprobe pciehp WARNING: /etc/modprobe.d/options.conf line 3: ignoring bad line starting with 'ProblemType:' WARNING: /etc/modprobe.d/options.conf line 4: ignoring bad line starting with 'Architecture:' WARNING: /etc/modprobe.d/options.conf line 5: ignoring bad line starting with 'DistroRelease:' WARNING: /etc/modprobe.d/options.conf line 6: ignoring bad line starting with 'Package:' WARNING: /etc/modprobe.d/options.conf line 7: ignoring bad line starting with 'ProcCmdLine:' WARNING: /etc/modprobe.d/options.conf line 8: ignoring bad line starting with 'ProcEnviron:' WARNING: /etc/modprobe.d/options.conf line 9: ignoring bad line starting with 'SHELL=/bin/bash' WARNING: /etc/modprobe.d/options.conf line 10: ignoring bad line starting with 'LANG=it_IT.UTF-8' WARNING: /etc/modprobe.d/options.conf line 11: ignoring bad line starting with 'ProcVersionSignature:' WARNING: /etc/modprobe.d/options.conf line 12: ignoring bad line starting with 'SourcePackage:' FATAL: Module pciehp not found. bert@mybook:~$
I am trying to make my card reader hot pluggable this lspci bert@mybook:~$ lspci 00:00.0 Host bridge: Intel Corporation N10 Family DMI Bridge 00:02.0 VGA compatible controller: Intel Corporation N10 Family Integrated Graphics Controller 00:02.1 Display controller: Intel Corporation N10 Family Integrated Graphics Controller 00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 02) ..... I am running ubuntu netbook remix on an acer aspire 532h.
I made some progress trying to get a host that has an Nvidia GeForce 6150 LE and running a liveCD version of Xubuntu 9.10... but "modprobe -i nvidia" returns "FATAL: Module nvidia not found."
Ok, I just upgraded from Slackware 13.0 to Slackware-current and now when I run modprobe ndiswrapper I get the following error.FATAL: Module ndiswrapper not found.Im not sure what happened on this. I did a search in google and couldn't find anything useful any help would be appreciated.
I want to activate cpu frequency scaling on my home computer. I have an athlon 64 3200+. I know that it supports frequency scaling, because when I got the processor I also got a CD with the Cool n'Quiet driver. I've tried with the powernowd service, but when I try to start it I get Code: * Starting powernowd... * CPU frequency scaling not supported...
and if I try to start cpufreqd I get Code: No cpufreq interface found, not starting cpufreqd In the meanwhile I've noticed that I also don't have powernow-k7 kernel module installed. If I try a modprobe powernow-k7 I get: Code: FATAL: Module powernow_k7 not found I have no ideea where I can get this kernel module.
I have a problem with loading the powersaving kernel module p4-clockmod.ko. When I try inserting the module (via modprobe or insmod) I get FATAL: Error inserting p4_clockmod (/lib/modules/2.6.31.8-mediaserver/extra/p4-clockmod.ko): Invalid module format The module has been compiled together with the kernel. Other modules load with no problem at all. I've tried recompiling the kernel (after re-installing the sources, make xconfig from scratch) - no avail. There's only one kernel source package installed. Searching the forum and google didn't yield a helping answer.
Boot up with 2.6.32 kernel. Get to login screen, X attempts to start and fails. I log in, execute startx and succeed. Yesterday, could not boot up at all with .30 kernel. Upgraded to .32, so partially fixed. Yesterday also un-installed Synaptics package, as do not have touch-pad on this machine (Thinkpad X40)
This from kdm.log: X.Org X Server 1.7.4 Release Date: 2010-01-08 X Protocol Version 11, Revision 0 Build Operating System: Linux 2.6.32-trunk-686 i686 Debian .....
I have just upgraded from 11.1 to 11.4. When I boot up, I get a command line, but when I do 'startx', I get 'Fatal server error: no screens found'. I have been looking for a solution and tried 'Xorg -configure' but this gives:
Code: Failed to load /usr/lib/xorg/modules/drivers/vboxvideo_drv.so: undefined symbol: resVgaShared
I have installed suse 11.2. Sometimes while using (firefox, okular, open office etc) x server restarts & comes to login screen. While checking Xorg.0.log i found i810 module is failed to load. Is this causing the x server restart?
I'm using openSUSE 11.1, KDE I'm trying to install the module Apache2::Request to my OS. After the gzip -dc libapreq2-2.12.tar.gz | tar -xof - I typed in Shell these (as shown in INSTALLATION document of module): perl Makefile.PL --with-apache2-apxs=/path/to/apache2/bin/apxs Then something goes wrong, make doesn't work saying: make: *** No targets specified and no makefile found. Stop..
I think the problem is in the command perl Makefile.PL --with-apache2-apxs=/path/to/apache2/bin/apxs in section .../path/to/apache2/bin/apxs . What does mean ./path/to/apache2/bin/apxs? Maybe I should write the path to apache2 which contains a file named apxs? I did not find such file apxs. My apache2 path is /etc/apache2, but there is no file named apxs... Result for perl Makefile.PL --with-apache2-apxs=/path/to/apache2/bin/apxs:
I am trying to install a Sunix 4018T dual parallel port card on a pc with Mandriva Linux 2010.1: Dealer told me that linux has driver for this card already so I inserted it and turned on my pc. Unfortunately when I try to install my Okidata ML320, cups it's not showing any parallel ports. I try to update all the system with last patches and packages :I tested the card on a pc with windows xp, installed my printer and it works perfectly.
I've installed openSuse 11.4 server-mode (text only) on my desktop, and I'm trying to configure IceWM so i'll eventually have it set up so it always boots into text only mode, but I could be able to quickly start icewm via the command line.using Yast, I installed the Xorg server, and icewm.when I type X, the screen goes black and it just doesn't seem to do anythingI found if I hit ctrl+alt+f1 it kinda puts me back into text only mode, but I can't put in commands anymore. The last thing it says on the screen is:
Failed to load module "fglrx" (module does not exist, 0)
I've goggled that error message and the discussions that popped up around it made no sense to me at all. I've never configured X from scratch before, can someone point me towards a tutorial or something?
OS openSuse 11.1 After boot its wrote: File system is clearn. bootsplash: status on console 0 changed to on. File system seems to have fatal corruptions. Running with --rebuild-tree is required - failed blogd: no message logging because /var file system is not accessible enci-hcd ohci-hcd uhci-hcd usb-jhce fsck failed for least one file system (not /). Please repair manually and reboot. The root file system is already mounted read-write. What file I have to correct?
When I deleted uninstalling and installing some packages in Yast2 I got this output:
Deleting mc Additional rpm output: rpmdb: PANIC: Invalid argument rpmdb: PANIC: fatal region error detected; run recovery error: db4 error(-30977) from dbcursor->c_put: DB_RUNRECOVERY: Fatal error, run database recovery error: error(-30977) storing record "4.0-1" into Requireversion rpmdb: PANIC: fatal region error detected; run recovery error: db4 error(-30977) from dbcursor->c_get: DB_RUNRECOVERY: Fatal error, run database recovery error: error(-30977) setting "3.0.4-1" records from Requireversion index rpmdb: PANIC: fatal region error detected; run recovery error: db4 error(-30977) from dbcursor->c_get: DB_RUNRECOVERY: Fatal error, run database recovery error: error(-30977) setting "" records from Requireversion index and on and on for 3 pages for every package.
I recently got a eSata docking station for hard drives and after deciding to make those volumes encrypted LVM's, I created my first logical volume. After setting it up in yast2 and rebooting I received a prompt for the lvm password, gave it and received:
Mar 17 13:38:21 blkdragon kernel: [ 1105.172687] padlock: VIA PadLock not detected. Mar 17 13:38:21 blkdragon kernel: [ 1105.313056] alg: No test for stdrng (krng) Mar 17 13:38:21 blkdragon kernel: [ 1105.323189] alg: No test for stdrng (ansi_cprng) Mar 17 13:38:22 blkdragon kernel: [ 1105.416892] padlock: VIA PadLock Hash Engine not detected. Mar 17 13:38:22 blkdragon modprobe: FATAL: Error inserting padlock_sha (/lib/modules/2.6.31.14-0.6-desktop/kernel/drivers/crypto/padlock-sha.ko): No such device
Boot resumed and I looked for the reason for this, the padlock-sha.ko module does exist in the appropiate place and the volume was mounted in spite of the error message. Lvmdump seems to indicate that the volume is, in fact, encrypted. My thoughts at the moment are that the volume was encrypted by aes, so the padlock-sha.ko was not necessary to mount the volume. Backtracking the message log the same error happened during the creation of the volume before rebooting. The kernel version gives it away but it's a 11.2 machine.
husam@ubuntu:~$ compiz setting manager compiz (core) - Error: Screen 0 on display ":0.0" already has a window manager; try using the --replace option to replace the current window manager. compiz (core) - Fatal: No manageable screens found on display :0.0
Launching fallback window manager Window manager warning: Buggy client sent a _NET_ACTIVE_WINDOW message with a timestamp of 0 for 0x1e000b4 (Mozilla Fi)Window manager warning: meta_window_activate called by a pager with a 0 timestamp; the pager needs to be fixed. Now, if i close terminal, window's will be bugged .
I just installed Maverick on a brand new system last Saturday. Everything worked, except dual monitors, so I activated the proprietary ATI/AMD driver. That allowed the dual monitors to work, except that it put a little "AMD unsupported hardware" watermark in the lower right-hand side of each screen. After a day or two, I decided to go back to the default driver while trying to figure out how to avoid the watermark.
I assumed that when I deactivated/removed the proprietary driver that it would automatically switch back to the default. Instead, my computer now boots to TTY1, and when I try to install xserver.xorg, etc., I get a lot of error messages,ike "No screens found" or "Screens found, but configuration is unusable," etc. The same messages show up in the logs.Can anyone help me get back to a useable desktop display? At this point, I don't care which one. erhaps the proprietary would be easiest since it seems to be holding my system hostage, but either one would work.