Ubuntu Networking :: NDISwrapper "module Could Not Be Loaded"?

Feb 13, 2011

I am trying to set up wireless on my desktop. It has no internet whatsoever, I could hook up ethernet but I would have to transfer the whole computer across the house. I installed ndiswrapper from the installation CD. I also installed NDISGTK which is some GUI with the ndiswrapper. I clicked Install New Driver, I am pretty sure I have all the other necessary files along with the mn710.inf, but I get the error:"Module could not be loaded. Error was:FATAL: Could not read '/lib/modules/2.6.35-22-generic/kernel/ubuntu/ndiswrapper/ndiswrapper.ko': No such file or directory"After clicking ok, it shows the driver there, but my card is still not working, no lights or anything. Does anyone know what that error is and how I can get it working?

View 1 Replies


ADVERTISEMENT

Fedora Networking :: 14 X64 Ndiswrapper Modprobe Ndiswrapper Module Not Found?

Jan 28, 2011

i've patched the source files to be installed on f14 and finally got a succesfull install, ndiswrapper -l comes back with driver installed and presentwhen i run modprobe ndiswrapper i get "FATAL: Module ndiswrapper not found" after many hours of google searching and reading various threads i cannont seem to find a solution to this apart from manualy coping the ndiswrapper.ko file but when i use that solution modprobe starts ndiswrapper but there is no wlan0 present in iwconfig.now for some reason even wheni move the ndiswrapper.ko file manually it still is giving me that error. this worked earlier as i mentioned but then i reinstalled ndiswrapper hoping something went wrong but still got the same error so i tried that same fix and i'm still getting that error. i can't figure out what i migt've done differently earlier but i'm not having any luck.

View 1 Replies View Related

Networking :: Any Way To Load Ndiswrapper Module At Boot?

Jan 9, 2010

I'm running Fedora 12 LXDE spin on a netbook (Asus EeePC) and have successfully installed a wireless driver using ndiswrapper. The only problem is that every time I reboot, I need to use the "modprobe ndiswrapper" command to load the module.

Is there a way to load the ndiswrapper module during the boot process?

View 3 Replies View Related

Ubuntu Networking :: Bcm4318 And 10.04 Lucid / B43 Module Working Instead Of Ndiswrapper?

Jun 17, 2010

I have a broadcom 4318 chipset for my wireless card, but after an upgrade to lucid my system was acting funny. I did a complete reinstall and all the issues are resolved except the wireless card. I would like to get the b43 module working instead of ndiswrapper. How can i do this right in lucid?

View 2 Replies View Related

Software :: FATAL Module Ndiswrapper Not Found

Mar 2, 2010

Ok, I just upgraded from Slackware 13.0 to Slackware-current and now when I run modprobe ndiswrapper I get the following error.FATAL: Module ndiswrapper not found.Im not sure what happened on this. I did a search in google and couldn't find anything useful any help would be appreciated.

View 14 Replies View Related

Slackware :: Vboxdrv Kernel Module Is Not Loaded

Sep 9, 2010

I installed VirtualBox-OSE and VirtualBox-Kernel from the Slackbuilds at slackbuilds.org.When I start VirtualBox I get the following message on the CLI: Code: WARNING: The vboxdrv kernel module is not loaded.Either there is no module available for the current kernel (2.6.33.4-smp) or it failed to load.Please recompile the kernel module and install it by sudo /etc/init.d/vboxdrv setup.You will not be able to start VMs until this problem is fixed.I gave /etc/rc.d/rc.vboxdrv executable permissions, and then ran.The only issue is, I have to do this each time that I reboot, should I add 'modprobe vboxdrv' to one of the startup scripts or is something else wrong?

View 7 Replies View Related

Debian Configuration :: Error: Module Ndiswrapper Not Found

May 23, 2010

I installed ndiswrapper and tried adding a driver. Error: module ndiswrapper not found.So I recompiled my kernel, upgrading to 2.6.33.4 (no, I can't see the logical connection either) After a week, I got the new kernel working ( in the interim I reinstalled debian- it didn't survive my first kernel attempt. don't ask), and reinstalled ndiswrapper. Same problem. So I had a stoke of genius: download the source package!! So I did. Lo and behold, a new directory appeared in /usr/src/ : modules. I took a moment to admire my work, then I jumped in.I 'ls'ed to see what was going on, and found a Makefile. so I typed 'make'. First error: kernel source not found. So I entered the Makefile, found the(clearly marked)variable,and changed it to /usr/src/linux-2.6.33.4 , exited, and redid 'make' Second error: no wireless support in kernel. So I went to src/linux-2.6.33.4 and did a make menuconfig- loaded my current, threw in wireless, and exited.

[Code]...

View 1 Replies View Related

Fedora :: Fatal - Module Ndiswrapper Not Found (Need USBcore)

Nov 8, 2009

I'm trying to configure ndiswrapper but when I run
Code:
modprobe ndiswrapper
it says

Code:
FATAL: Module ndiswrapper not found.
I know it needs usbcore so I run

Code:
modinfo usbcore
modinfo: could not find module usbcore
So How should I get usbcore working?

View 6 Replies View Related

OpenSUSE Wireless :: 11.2 Repo - Module Ndiswrapper Not Found

Apr 24, 2010

I updated to the latest kernel from Suse 11.2 repo. My wireless device won't load firmwares, ndiswrapper won't be a module anymore etc. :

Code:
inux-kqzq:/home/olivier/T l chargement/fwextract3 # modprobe ndiswrapper
FATAL: Module ndiswrapper not found.
linux-kqzq:/home/olivier/T l chargement/fwextract3 # find /usr -name ndiswrapper
/usr/sbin/ndiswrapper
^C
linux-kqzq:/home/olivier/T l chargement/fwextract3 # find /lib -name ndiswrapper*
/lib/modules/2.6.31.5-0.1-desktop/updates/ndiswrapper.ko
linux-kqzq:/home/olivier/T l chargement/fwextract3 # uname -r
2.6.31.12-0.2-desktop
2.6.31.12-0.2-desktop is uname
and 2.6.31.5-0.1-desktop is the module

View 1 Replies View Related

General :: Is '0' At End Of Line Meaning That Module Is Not Successfully Loaded?

Aug 24, 2010

I am trying to see if a module that i loaded on Redhat succeeds.The module is from intel called vtune_drv-x32_64-2.6.18-194.el5smp.ko.When I run the script during the installation process, it shows that it is successful.Is the "0" at the end of line meaning that the module is not successfully loaded?

View 2 Replies View Related

General :: Making Sure A Module Is Loaded In The Kernel Upon Boot?

Dec 22, 2010

im doing a school assignement and i cant find any info about this anywhere. How do i make sure that a module is loaded into the kernel upon boot?

View 2 Replies View Related

Ubuntu Multimedia :: Sound Kernel Module Is Loaded, But Doesn't Works ?

Mar 30, 2010

I've Ubuntu 9.10 with 2.6.31-20 kernel.Sound kernel module is loaded, but doesn't works ;((. I have not got any errors and all programs (e.g. mplayer) thinks that sound driver is present and works OK but I can't hear a sound...A part from lspci -vvnn

Code:
01:00.1 Audio device [0403]: nVidia Corporation Device [10de:0be3] (rev a1)
Subsystem: Sony Corporation Device [104d:9067]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-[code]....

View 3 Replies View Related

OpenSUSE Install :: Raid10 Module Not Loaded In Installation Image?

Feb 13, 2010

I am trying to install 11.2 on a system with RAID-1 /boot partition and RAID-10 /(root) partition. I have done this before with 10.3 but am hitting a wall with 11.2. In particular, the boot image loads and then halts when it tries to load the RAID-10 root partition saying that the personality is not laoded. modprobe shows that the raid10 module does not appear to be part of the boot image. I cannot find anything in the installation that will allow me to specify a module to include in the init image. How do I tell the installer to include an additional module?

View 3 Replies View Related

OpenSUSE Wireless :: Ath9k Module Loaded But Can't Connect To 802.11n Network?

Jul 24, 2010

I have an Acer 1551-4755 notebook with AR5B93 wireless chipset. ath9k is loaded and my card is detected as Atheros AR928X PCI-Express wireless network adapter. However, the ath9k driver is only allowing me to connect at 802.11g speed in spite of the fact that my WRT310N loaded with DD-WRT is in mixed mode. I am able to connect at wireless N speed with my D-Link DWA-130 usb dongle, but this is a rather backward solution. Is there a way to work around this issue, ie an updated ath9k or other madwifi driver? I would hate to resort to ndiswrapper for a natively supported chipset. I am using openSuSE 11.3 for the first time, long time Fedora user.

View 1 Replies View Related

OpenSUSE Wireless :: Linksys WUSB600N V2 Module Doesn't Get Loaded

Jan 18, 2011

After much tiddling'n'fiddling I finally got my new Linksys WUSB600N v2 working. Contrary to many posts, mine did NOT work with either the standard rt2870sta module, nor the updated version from the driver:wireless repo. Also the rt2870 version from the ralink website didn' t work. After a days worth of Googling I came across this post. The bottom line?

1. Download rt3572 from the Ralink website.
2. Add {USB_DEVICE(0x1737,0x0079)}, /* WUSB600N v2 */ to common/rtusb_dev_id.c
3. Follow README_STA

I did not install firmware packages. And be sure the rt2800sta module doesn' t get loaded. (you could just remove it, I suppose.)

View 9 Replies View Related

OpenSUSE :: Can't Start Virtualbox PUEL In 11.3 - WARNING: Vboxdrv Kernel Module Not Loaded

Aug 8, 2010

I have installed Virtualbox PUEL in 64-bit 11.3. This is a fresh install. My computer has an onboard nvidia 8300GS graphics card. I do not think this is related to the issue. I added the virtualbox repository and installed the program via yast. when I type "VirtualBox" in the terminal I get the following output:

[code]...

View 4 Replies View Related

OpenSUSE Wireless :: Cannot Find Map File. No Module Symbols Loaded - Kernel Modules Not Enabled

Aug 3, 2010

Used to work perfectly. I attempted to install VPN client, result is can't connect to anything. Networks are seen by network manager, nothing happens when click connect. Results below:

Wireless LAN present in Hardware information. Atheros AR242x 802.11abg Wireless PCI Express Adapter (wlan0)
Kernel Driver: ath5k
168c:001c
/var/log/boot.msg

[code]....

Advice is to use output of dmesg command to find problem, but as above I don't get any results for this in terminal.

attempt to ping external site
linux-cfi6:~ # ping -c 66.70.73.150
Usage: ping [-LRUbdfnqrvVaA] [-c count] [-i interval] [-w deadline]

[code]....

View 1 Replies View Related

OpenSUSE Multimedia :: WARNING: Raw1394 Kernel Module Not Loaded Or Failure To Read/write /dev/raw1394

Jun 25, 2010

I get this error message with KINO.

WARNING: raw1394 kernel module not loaded or failure to read/write /dev/raw1394!

View 9 Replies View Related

Ubuntu :: Error Inserting Ndiswrapper (/lib/modules/2.6.12.9-386/kernel/drivers/net/ndiswrapper

Dec 18, 2010

I have a problem installing mi dlink dlw-g122 wireless usb adapter.I installed the drivers, in fact when executing

ndiswrapper -l
the output is
dr71wu driver present, hardware present
but when I try to execute
modprobe ndiswrapper

I have this error:

FATAL : Error inserting ndiswrapper (/lib/modules/2.6.12.9-386/kernel/drivers/net/ndiswrapper/ndiswrapper.ko): Operation not permetted

View 4 Replies View Related

Networking :: Rtl8187 Driver Module Load Error (Invalid Module Format)?

Jun 1, 2009

When I try to load the Realtek 8187 modules to kernel using the ./wlan1up command, I get the following error:

[root@localhost rtl8187_linux_26.1025.0328.2007]# ./wlan1up
insmod: error inserting 'ieee80211_crypt-rtl.ko': -1 File exists

[code]...

Can someone tell me how to correct the "Invalid module format"? I hope that correcting the "Invalid module format" error, I will not have the "Unknown symbol in module" error.

Note: I am using wlan1 for this module as I previously am online with the wlan0 network.The same error occurs if I use ./wlan0up.

View 3 Replies View Related

Ubuntu Networking :: Ndiswrapper On Startup (8.04)?

Jan 7, 2010

I'm currently using Ndiswrapper for my wireless usb card that uses the RTL8187B Chipset on Ubuntu 8.04. To get myself to connect I have to run "sudo modprobe ndiswrapper" everytime. Is there a way I can connect automatically?

View 9 Replies View Related

Ubuntu Networking :: Ndiswrapper Instead Of RTL8187 ?

Jan 9, 2010

I have Ubuntu 9.10. My USB WG111v3 Wireless Card uses the rtl8187 driver. This driver is buggy. I would like to use Ndiswrapper instead. How to make it so Ubuntu doesn't load the rtl8187 driver but Ndiswrapper instead?

View 2 Replies View Related

Ubuntu Networking :: Get Rid Of Ndiswrapper Completely?

Sep 18, 2010

So after a quick look around the forums, I haven't seen anything on removing ndiswrapper. What I have done is removed ndiswrapper via synaptic. Now in order to start my wireless card I have to issue:

rmmod ndiswrapper
modprobe ath9k
ifconfig wlan0 up

Basically this is a pain. Does anyone know how to get rid of ndiswrapper completely and set things up to use ath9k automatically?

View 1 Replies View Related

Ubuntu Networking :: Can't Make Ndiswrapper-1.56?

Jun 18, 2011

I recently installed Ubuntu 11.04 to run a Minecraft Server. Now against better judgement and seeing that it is only for 7 people, I decided to use a wireless usb card to connect to the internet. Well, I was told that I was going to have to install ndiswrapper. I downloaded it on my Mac and used a USB drive to transfer it to my desktop. I then double clicked and extracted. I then did this in the terminal:

Code:
To run a command as administrator (user "root"), use "sudo <command>". See "man sudo_root" for details.

[Code]...

View 2 Replies View Related

Ubuntu Networking :: Can't Connect After Using NDISWrapper / Make It Possible?

Jan 2, 2010

My wireless card (an Atheros AR928x) was not performing very well. At the suggestion of a friend I tried to use NDISWrapper (using the ndisgtk GUI interface) to see if a Windows driver would work better. I found the XP drivers online, tried several versions and, after none worked, I decided that I might as well settle with the crappy quality of the Linux driver and let it go. Sadly, that may not be possible.

I removed the drivers (again via ndisgtk) and now the laptop can't use the card at all. It won't detect any networks (even when just five feet from the router) and I'm not sure what's causing this. I've tried rebooting and rebooting into an older kernel. I checked lspci and it still recognizes the card.

Any idea what's up and how I could fix it?

View 8 Replies View Related

Ubuntu Networking :: Ndiswrapper - Connect To The Internet

Mar 21, 2010

I have tried to get ndiswrapper to work on an ubuntu 9.04 32 bit system but have yet to succeed. After installing the windows driver, the usb wireless network adapter is recognized but will never connect to the internet. I have disabled the driver included with jaunty. Now what makes this strange (at least to me) is that ndiswrapper works perfectly with ubuntu 9.04 64 bit. It could very well be something that I am not doing in the 32 bit system (but I don't know what that might be).

I have tried ndiswrapper with several other distros with the same result. So, I don't think it is specifically related to ubuntu however, since ubuntu is what I am using, I am posting in this forum hoping that someone might be able to help me. I have several 32 bit machines I would like to set up but cannot until I get this resolved. I have also tried downloading and compiling a native driver with no success either. Anyway, here is my setup:

PC with AMD64 dual core processors running at 2Ghz and 3 GB ram.
Belkin N150 Enhanced Wireless Router
Belkin N150 Enhanced Wireless USB Network Adapter

And an aside: I am using WICD network manager and would like to know what the tray icon means when it says it is connected at say 54%. My question is, 54% of what? In windows this info is given in Mbps which is more meaningful.

View 3 Replies View Related

Ubuntu Networking :: Reverting Back From Ndiswrapper?

Apr 20, 2010

Using karmic on acer aspire 5332.Wifi was working from fresh install but would drop out often and sometimes freeze laptop resulting in hard reset.Installed Ndiswrapper to try windows wireless drivers unfortunately i can't get them to work. How can i revert back to original supplied drivers?

View 2 Replies View Related

Ubuntu Networking :: Get Ndiswrapper To Start At Boot-up?

Jun 6, 2010

I had been having problems with my Asus wireless card connecting to my router. Turns out, using ndiswrapper and the XP driver solved the issue. Based on my title of the thread, the driver worked, I turned off computer at night, next day, I can't seem to start the wireless driver again. How would I go about doing this? I am running Ubuntu 10.04, Asus PCE N13 wireless card.

View 3 Replies View Related

Ubuntu Networking :: Can't Configure Or Delete Ndiswrapper?

Jun 23, 2010

cant continue when i install or delete ndiswrapper I got this message:

Errors were encountered while processing:
ndiswrapper-dkms
Setting up ndiswrapper-dkms (1.56-1) ...
Removing old ndiswrapper-1.56 DKMS files..
Deleting module version: 1.56
completely from the DKMS tree.

[Code]...

View 1 Replies View Related

Ubuntu Networking :: Can't Locate Ndiswrapper Query

Sep 25, 2010

I am trying to install windows wireless drivers using ndiswrapper to have better connectivity around my house(I can only currently get online in certain rooms, very restricted). I have ndiswrapper installed OK, but I am a bit lost on the step where I have to browse to my windows wireless driver(a .inf file I believe), my question is how do I know where this is? I can't seem to locate it at all. I'm running on windows vista.

View 6 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved