OpenSUSE Install :: Not Working Right - Error "There Is A Problem With The Configuration Server (/usr/lib/Gconf-sanity- Check - 2 Exited With Status 256"
Jun 20, 2011
Having downloaded 11.4 Gnome, finding it did not install I bought it on DVD from ebay, when trying DVD installation my PC is displaying: There is a problem with the configuration server (/usr/lib/Gconf-sanity- check - 2 exited with status 256, I would like to install this rather then just run it off disk
yesterday i tried to install bt4 from alongside ubuntu 10.04. Unfortunately the DVD had some errors and the installation stopped. Everything was fine till then, even the GRUB was working(i guess!) but when i tried to log into my Ubuntu it gave me an error... " /usr/lib/libgconf2-4/gconf-sanity-check-2 exited with error status 256" also there was a popup like "gnome power management was not properly installed ....blah blah blah Contact you network admin"
i have only one user on that system. i tried the single user mode but no success... i then tried to Ctrl+Alt+F1-F6 no success... can't switch to command line(this is my display problem i guess)
i have now decided to install a fresh install but i do need to take the backup. What all should i copy to the new install so that i get the same feel as before?
I ran update through the terminal and rebooted i get this error message on start up and again after I log in Please Help!! I'm running Ubuntu 11.04 using unity 2d and the latest version of Gnome 2 on a Dell Inspiron 5150 laptop There is a problem with the configuration server. (/usr/lib/libgconf2-4/gconf-sanity-check-2 exited with status 32512)
I developed a java application to organize the articles and notes for what I need for my work reports. The path appear in a jlist component and by clicking on I'd like the file opened. The application works fine in /home side.
In /root side I get this message error:
"GConf Error: Failed to contact configuration server; the most common cause is a missing or misconfigured D-Bus session bus daemon." I work in KDE (OpenSuse 11.4). Why I need a configuration tipically of GNOME?
i been getting errors when trying to use zypper from the console. This happens in 2 pcs, and errors seem to be the same,One has 11.4 + gnome 2, standar installation (with gnome) from 11.4 DVD. The error i get whenever i run something like zypper install xxxyyy.rpm or zypper update is:
GConf Error: Failed to contact configuration server; the most common cause is a missing or misconfigured D-Bus session bus daemon. See GConf configuration system for information. (Details - 1: Failed to get connection to session: The connection is closed)
I dont know if its related, but the one with gnome 3 constantly gives me (what i think is) a kernel panic when i shut down the system, it happens fast and the text on the screen is not "linear" but spread all over the screen, so i cant read the whole message, but it does say something about glib and corruption.This is actually the first time(s) ibe seen a kernel panic ever since i used ubuntu.
Anyone what this gksu error is about (it repeats it three times)
gksu-2.0.0-1.el5.rf.x86_64.rpm # gksu ls
GConf Error: Failed to contact configuration server; some possible causes are that you need to enable TCP/IP networking for ORBit, or you have stale NFS locks due to a system crash. See [URL] for information. (Details - 1: Failed to get connection to session: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.)
I have a transparent proxy Squid-3.0 on Slackware 12.2. I used cron to restart squid every day at 7:30 AM (just /path.to.squid/squid -k kill && /path.to.squid/squid) Some days ago I saw in /var/log/messages that Squid was killed but haven't started. I started it manually and everything was OK. But today everything repeated. And the log file is interesting. I tried to find about it on http://squid-cache.org/ but al in vain. This is from /var/log/messages :
May 24 07:30:02 konura squid: Squid Parent: child process 17199 exited due to signal 9 May 24 07:30:02 konura squid: Squid Parent: child process 19040 started May 24 07:30:03 konura squid: Squid Parent: child process 19040 exited with status 1 May 24 07:30:06 konura squid: Squid Parent: child process 19045 started
I need to say that I haven't edited the config file for a long time, but this problem started to happen. ADDED, Solved: I'm not sure, but maybe I found the decision. I deleted about 400 mb of Sarg logs from /var partition. And now squid runs well. Besides, before deleting old logs, 'crontab -e' and 'pkgtool' didn't work And the system wrote me that it's no space left on device. At the same time, 'df -h' showed me that all partitions had enough free space. Seems strange, but that's it. After deleting old proxy statistics, generated by Sarg (this is about 400 mb) 1)squid runs OK and 2)there are no more that annoying messages about abscence of free space.
I have mounted an NFS share with ISO images on my kvm Server. If i connect such a iso to a VM (using virt-manager) for installing a operating system i get the following error on startup: Error starting domain: internal error Process exited while reading console log output: char device redirected to /dev/pts/1 qemu: could not open disk image /mnt/iso/public/Linux/Distributions/Debian/debian-504-amd64-netinst.iso: Permission denied
The problem is definitly that kvm (or qemu or libvirt-bin, i don't know) tries to set permissions (rwx owner for libvirt-qemu, --- for kvm group, --- for other) on the file, although it has read permissions. Is it possible to change this behavior?
Updating my kernel corrupted grub preventing me from booting. Running the grub shell to restore the primary stage bootloader, restored bootability. It is important to note, that several months ago, I had a similar failure that corrupted the MBR.Are there any Linux based tools to check an HD for sanity? By the latter I am not only understanding software integrity but also hardware sanity.
Recently, every time I try to compile an app from its source code, after issuing the ./configure command I get this message:configure: error: C preprocessor "/lib/cpp" fails sanity checkSee `config.log' for more details.I check /lib/cpp but there is not directory named /cpp under /libthis problem occurs on all source packages.
What is the proper way to make the smb and nmb services start (and keep running) automatically? I have successfully configured samba on my F15 box, but sometimes the other boxes cant see it. I check the status of smb and nmb and smb is running and active, but nmb status is "Running (exited)". If I manually restart nmb then nmb status changes to "Running (active)" and the problem goes away. However I want it to start (and keep running) automatically as it should. I am thinking maybe the problem is the way I set smb and nmb to start automatically.
I used $chkconfig smb on and $chkconfig nmb on
Is this the correct way? if not, what is it? Maybe I need to be more specific about at which runlevels I want the services to start? I have googled, but found about 5 diferent methods to make this services start automatically, some with systemctrl, some editing files, chkconfig, and even the system-config-services app (which seems broken in f15 btw) and don't know which one to use.
Keep receiving the following error message when i try to compile any code: Code: checking how to run the C++ preprocessor... /lib/cpp configure: error: C++ preprocessor "/lib/cpp" fails sanity check logs test out some code with the C preprocessor and fail, thereby failing the "sanity check" I reinstalled cpp, but to no avail.
is I've restored a tar.bz2 backup I've made, all fine until it comes to configure/make.the backup was made on my laptop, the transferred to another computer, I used tarxvpf filename and sure backup was madetar -zcvpf filename / (--exclude=dev etc)dist is lfs,he laptopstill works fine, file date, size, mods all the same so quite pu as to way I get"/lib/gcc failed sanity check"when running .configurep.s. laptop and computer both based
I'm having an issue when I'm trying to install SuSE linux onto my desktop.I go through all the steps and everything looks okay, but when it starts to install the packages, I get an error message that basically says:kernel.desktop - unable to install, exit status 127.I have a ATI X1950 video card in the computer, as well as a AMD 64 FX CPU in the system.
I would like to implement something when a server is offline for whatever reason. For example. I got my own DNS servers and webservers. I would like it if the users goes to www.somedomain.com and the server it is actually on is down for maint. or For whatever not able to respond. What can be done so that if the server isn't able to be contacted that it can point to either a another server or the dns somehow can display a page stating who to contact to report a problem or to let them know its down for maint. And can goto a site to check the status or whatever.
I've just made the switch from Ubuntu to Debian Squeeze and am having trouble connecting external media (be it a USB stick or an ext HD). The error I am getting when I connect anything via usb is the following:
Error mounting: mount exited with exit code 1: helper failed with: mount: wrong fs type, bad option, bad superblock on /dev/sdc1, missing codepage or helper program, or other error.
Heare i come with Nagios Problem, When ever i stop nagios it say's
[root@x292 ~]# service nagios stop Stopping nagios: No lock file found in /usr/local/nagios/var/nagios.lock When ever i restart nagios it say's [root@x292 ~]# service nagios restart Running configuration check... CONFIG ERROR! Restart aborted. Check your Nagios configuration. my nagios.cfg file is # 'Nagios CFG 1'
during an "apt-get install" the filesystem of a virtual machine filled up and so it failed. I have now increased the file-system size but running the same "apt-get install" again results in this error: "E: dpkg was interrupted, you must manually run 'sudo dpkg --configure -a' to correct the problem." However when I try to run 'sudo dpkg --configure -a' I get this error: "dpkg: failed to write status database record about 'libxmuu1' to '/var/lob/dpkg/status': No space left on device" How can I recover from this situation?
Newbie (again) trying to break the ties with Microsoft.Installed 11.2 this afternoon and have been fighting it ever since.I had an issue with the HLPIP Status Service stating "No system tray detected on this system. Unable to start, exiting". When I clicked "ok" I was presented with a blank destop and the widget icon in the corner.As I'm dual booting I was able to get back to M$ and determine this is an issue with the HP drivers and that I could add widgets to the desktop in order to use the OS. I've done that and have been able to get Yast running to update the drivers, didn't help, so I deleted the HP drivers for now.I can now boot into OpenSuse but I'm presented with my desktop full of widgets.
I recently installed this awesome distribution - Fedora 15 x64 because of the Gnome 3. I love it. But i have problem with adding music library folders to rhythmbox. I' ve been using gconf-editor for that on all debian based distributons i worked until this. I installed gconf-editor 3.0.0-2 but cannot find the entry for rhythmbox player. Can you tell me how to fix this ?
i have centos 5 running with apache, mysql, php and phpmyadmin. phpadmin is working well but it is showing the following error on the page:- Cannot load mcrypt extension. Please check your PHP configuration.i just try to install mcrypt but it is asking for required dependencies libmcrypt.