I ran update through the terminal and rebooted i get this error message on start up and again after I log in Please Help!! I'm running Ubuntu 11.04 using unity 2d and the latest version of Gnome 2 on a Dell Inspiron 5150 laptop There is a problem with the configuration server. (/usr/lib/libgconf2-4/gconf-sanity-check-2 exited with status 32512)
View 5 Repliesyesterday i tried to install bt4 from alongside ubuntu 10.04. Unfortunately the DVD had some errors and the installation stopped. Everything was fine till then, even the GRUB was working(i guess!) but when i tried to log into my Ubuntu it gave me an error... " /usr/lib/libgconf2-4/gconf-sanity-check-2 exited with error status 256" also there was a popup like "gnome power management was not properly installed ....blah blah blah Contact you network admin"
i have only one user on that system. i tried the single user mode but no success... i then tried to Ctrl+Alt+F1-F6 no success... can't switch to command line(this is my display problem i guess)
i have now decided to install a fresh install but i do need to take the backup. What all should i copy to the new install so that i get the same feel as before?
Having downloaded 11.4 Gnome, finding it did not install I bought it on DVD from ebay, when trying DVD installation my PC is displaying: There is a problem with the configuration server (/usr/lib/Gconf-sanity- check - 2 exited with status 256, I would like to install this rather then just run it off disk
View 9 Replies View RelatedAfter installing a new Rhel6.0 64bit on VMWare i got the information:
{
disabling swap...
/dev/dm-1
unmounting filesystems...
/mnt/runtime done
code....
when trying to install a tarball i am getting the following error when configuring:
configure: error: in `/home/server/tazzed/mkahawa-printer-0.0.1':
configure: error: C++ preprocessor "/lib/cpp" fails sanity check
Updating my kernel corrupted grub preventing me from booting. Running the grub shell to restore the primary stage bootloader, restored bootability. It is important to note, that several months ago, I had a similar failure that corrupted the MBR.Are there any Linux based tools to check an HD for sanity? By the latter I am not only understanding software integrity but also hardware sanity.
View 1 Replies View Relatedam trying to build some programs like lmms or qtraktorbut I often get the reported erro
View 3 Replies View RelatedI'm trying to compile a c++ application in KDevelop in Ubuntu 8.10. I get this error on Distclean:
aclocal
autoheader
automake
[code]....
Recently, every time I try to compile an app from its source code, after issuing the ./configure command I get this message:configure: error: C preprocessor "/lib/cpp" fails sanity checkSee `config.log' for more details.I check /lib/cpp but there is not directory named /cpp under /libthis problem occurs on all source packages.
View 3 Replies View RelatedWhat is the proper way to make the smb and nmb services start (and keep running) automatically? I have successfully configured samba on my F15 box, but sometimes the other boxes cant see it. I check the status of smb and nmb and smb is running and active, but nmb status is "Running (exited)". If I manually restart nmb then nmb status changes to "Running (active)" and the problem goes away. However I want it to start (and keep running) automatically as it should. I am thinking maybe the problem is the way I set smb and nmb to start automatically.
I used
$chkconfig smb on
and
$chkconfig nmb on
Is this the correct way? if not, what is it? Maybe I need to be more specific about at which runlevels I want the services to start? I have googled, but found about 5 diferent methods to make this services start automatically, some with systemctrl, some editing files, chkconfig, and even the system-config-services app (which seems broken in f15 btw) and don't know which one to use.
Keep receiving the following error message when i try to compile any code:
Code:
checking how to run the C++ preprocessor... /lib/cpp
configure: error: C++ preprocessor "/lib/cpp" fails sanity check
logs test out some code with the C preprocessor and fail, thereby failing the "sanity check" I reinstalled cpp, but to no avail.
is I've restored a tar.bz2 backup I've made, all fine until it comes to configure/make.the backup was made on my laptop, the transferred to another computer, I used tarxvpf filename
and sure backup was madetar -zcvpf filename / (--exclude=dev etc)dist is lfs,he laptopstill works fine, file date, size, mods all the same so quite pu as to way I get"/lib/gcc failed sanity check"when running .configurep.s. laptop and computer both based
I have no idea what I've done but I can't compile from source anymore.
VectorLinux standard 6.0
everything I try to compile fails at ./configure with an error :
Quote:
The content of config.log: (kinda long)
Quote:
This file contains any messages produced by compilers while running configure, to aid debugging if configure makes a mistake.
It was created by mpc configure 0.8.2, which was generated by GNU Autoconf 2.65.
Invocation command line was:
configure: exit 1
I was intending to recompile gcc from source instead of the the one came with the distro, but to do so I need MPC, which I can't compile.
I have a transparent proxy Squid-3.0 on Slackware 12.2. I used cron to restart squid every day at 7:30 AM (just /path.to.squid/squid -k kill && /path.to.squid/squid) Some days ago I saw in /var/log/messages that Squid was killed but haven't started. I started it manually and everything was OK. But today everything repeated. And the log file is interesting. I tried to find about it on http://squid-cache.org/ but al in vain. This is from /var/log/messages :
Code:
May 24 07:30:02 konura squid[17188]: Squid Parent: child process 17199 exited due to signal 9
May 24 07:30:02 konura squid[19038]: Squid Parent: child process 19040 started
May 24 07:30:03 konura squid[19038]: Squid Parent: child process 19040 exited with status 1
May 24 07:30:06 konura squid[19038]: Squid Parent: child process 19045 started
[code]....
I need to say that I haven't edited the config file for a long time, but this problem started to happen. ADDED, Solved: I'm not sure, but maybe I found the decision. I deleted about 400 mb of Sarg logs from /var partition. And now squid runs well. Besides, before deleting old logs, 'crontab -e' and 'pkgtool' didn't work And the system wrote me that it's no space left on device. At the same time, 'df -h' showed me that all partitions had enough free space. Seems strange, but that's it. After deleting old proxy statistics, generated by Sarg (this is about 400 mb) 1)squid runs OK and 2)there are no more that annoying messages about abscence of free space.
when I execute the command from the shell command line - it works and no error code.if I do the exact same command from a perl file - it fails with code 32512.the file is created from the same perl script that runs the command that fails. file permission is 0664.
Code:
#! /usr/local/pkg/perl-5.8.8/bin/perl
print "Content-type: text/html
[code]...
Has anyone else had a gconf failure, Xserver fails to start after the last update with glibc etc.This machine is OK, but my dell laptop, 64 bit now has a gconf failure after login.The unit will still runs in init 1.Is there a nice yum command like yum undo screwup ?, else its a possible reinstall with no updates.
View 4 Replies View RelatedI'm running CentOS 5.4 and noticed that for the past month there haven't been any new updates showing up either on 'yum check-update' or 'yum update' (I'm interested in basic and security updates). Although this may be right, I wonder if there is an online reference where I can check the updates that are released for CentOS (security bulletins) and make sure if there is anything wrong with my update system.
View 11 Replies View RelatedI have mounted an NFS share with ISO images on my kvm Server. If i connect such a iso to a VM (using virt-manager) for installing a operating system i get the following error on startup: Error starting domain: internal error Process exited while reading console log output: char device redirected to /dev/pts/1 qemu: could not open disk image /mnt/iso/public/Linux/Distributions/Debian/debian-504-amd64-netinst.iso: Permission denied
The problem is definitly that kvm (or qemu or libvirt-bin, i don't know) tries to set permissions (rwx owner for libvirt-qemu, --- for kvm group, --- for other) on the file, although it has read permissions. Is it possible to change this behavior?
Everytime I shutdown/restart my computer without properly turning off the Tor network and get the following message from Vidalia:
"Vidalia detected that the Tor software exited unexpectedly"
The only way I can get Vidalia to work again is to reinstall Vidalia.
using 'ntfs-config' to make ntfs partitions mount on bootup so that I can access my data partition from Ubuntu. The first time I installed ntfs-config it would not run. I uninstalled and reinstalled it and then it ran, but it didn't seem to be responding very well. I attempted to tick the partition I wanted and set it to be writeable. After I closed the app ALL my ntfs partitions were mounted, even the windows and system reserved partitions, and when I attempted to unmount them I got the following error:
Unable to unmount Data
Error unmounting: unmount exited with exit code 1:
helper failed with
unmount /dev/mapper/isw_dfjjdefcdi_RAID5p4 is not mounted (according to mtab)
I tried rebooting. I tried uninstalling ntfs-config, then reinstalling it (now it wont run again). So I'm at a loss as to what to do. I simply want my data partition mounted on boot up and writable, not the others.
Ubuntu server, no GUI installed; two partitions: OS and user.How can I check the status of the user partition? E.g. Free space, directory, etc
View 2 Replies View RelatedI have been running a live version on a 8 gig stick. Played nice for a couple of months but now when I try to access the native ntfs file system, I get the following error message.... Error mounting: mount exited with exit code 21: mount: according to mtab, /dev/sda6 is already mounted on /media/c
View 1 Replies View RelatedMy computer has been acting quite strange lately. It's been taking longer to boot, and my sound doesn't play anymore (Only a high pitched sound is heard, and no hardware for sound is detected). Just recently, my Windows 7 Partition returned the error of Disk Error Occured. Press CTRL+ALT+DEL to restart.
Any way I can fix my whole issue, I think my desktop is starting to die on me :O (And its only about 7 months old T_T)
my windows xp system has recently been messed up, everytime i boot, i see the windows logo and then it reboots so i decided to liveboot ubuntu in order to recover the important files on my hard drive and then reboot. Problem is when i try to click on my "500GB Filesystem" I get this message.Unable to mount 500GB FilesystemError mounting: mount exited with code 13:ntfs_attr_pread_i:ntfs_pread failed:/input/output error Failed to read NTFS $Bitmap:Input/output error NTFS is either inconsistent, or there is a hardware fault, or it's a SoftRAID/FakeRAID hardware. In the first case run chkdsk/f on Windows then reboot into Windows twice.The usage of the /f parameter is very important! If the device is SoftRAID/FakeRAID then first activate it and mount a different device under the /dev/mapper/directory(e.g./dev/mapper/nividia_eahaabcc1). Please see the 'dmraid' documentationfor more details
View 1 Replies View Relatedwant to know what is the cmd to ping/check the link speed or something like Network Info. If for server checking (Show information CPI info) is (cat /proc/cpuinfo ) (correct me if im wrong)
View 4 Replies View RelatedWe have a Dell Poweredge 1750 server with 2 harddrives in RAID 1 running Debian Etch. Yesterday one of the hardrives stopped working but no error message appeared in syslog. The only indication was the amber LED diode. Is there a software way how to check that both disks are OK?
View 5 Replies View RelatedIn Zentyal, it showed me active drives, if the array was degraded, and if there was any syncing happening when the array was building. How can I check that without Zentyal? Is there a terminal command or an application I can install to tell me the same information?
View 2 Replies View RelatedI already checked the preferences of UM but the filtering is somewhat awkward -- i.e. you have choice to EITHER install silently security updates OR be notified about all updates. One does not exclude the other, but for UM apparently it does.
But I have similar yet different need -- be notified about ONLY security updates (so when I click to show the updates, I will see only them). The rest of the updates should be ignored -- unless the update is required by the other, security update package.
I want small facebook tab like widget on my desktop.It is available in kubuntu.Is there any way to create it??I should be able to view updates,update my status etc
View 1 Replies View RelatedI'm running CentOS 5.5 and have created an init script. The start of the script contains:
# Source function library.
if [ -f /etc/init.d/functions ]; then
. /etc/init.d/functions
fi
The start bit works fine, but I'm having problems with the status and stop part:
status)
echo -n "Status of script: "
status "/bin/sh /path/to/script.sh"
RETVAL=$?
echo
;;
In PS AUX the command appears as "/bin/sh /path/to/script.sh" and I can see the PID. But when I run:
./my_init_script status
It says the script is not running. Should I be using the /bin/sh bit, or just the full script path, or just the script filename?
The stop part of the init script utilises "killproc". Again what command should I be using to successfully kill all occurrances of the script?