Red Hat :: Error: Mdadm Exited With Status: 127?

Jan 11, 2011

After installing a new Rhel6.0 64bit on VMWare i got the information:
{
disabling swap...
/dev/dm-1
unmounting filesystems...
/mnt/runtime done
code....

View 6 Replies


ADVERTISEMENT

Ubuntu Installation :: /usr/lib/libgconf2-4/gconf-sanity-check-2 Exited With Error Status 256

Sep 6, 2010

yesterday i tried to install bt4 from alongside ubuntu 10.04. Unfortunately the DVD had some errors and the installation stopped. Everything was fine till then, even the GRUB was working(i guess!) but when i tried to log into my Ubuntu it gave me an error... " /usr/lib/libgconf2-4/gconf-sanity-check-2 exited with error status 256" also there was a popup like "gnome power management was not properly installed ....blah blah blah Contact you network admin"

i have only one user on that system. i tried the single user mode but no success... i then tried to Ctrl+Alt+F1-F6 no success... can't switch to command line(this is my display problem i guess)

i have now decided to install a fresh install but i do need to take the backup. What all should i copy to the new install so that i get the same feel as before?

View 1 Replies View Related

Ubuntu :: Error After Updates - Gconf-sanity-check-2 Exited With Status 32512

Jul 22, 2011

I ran update through the terminal and rebooted i get this error message on start up and again after I log in Please Help!! I'm running Ubuntu 11.04 using unity 2d and the latest version of Gnome 2 on a Dell Inspiron 5150 laptop There is a problem with the configuration server. (/usr/lib/libgconf2-4/gconf-sanity-check-2 exited with status 32512)

View 5 Replies View Related

OpenSUSE Install :: Not Working Right - Error "There Is A Problem With The Configuration Server (/usr/lib/Gconf-sanity- Check - 2 Exited With Status 256"

Jun 20, 2011

Having downloaded 11.4 Gnome, finding it did not install I bought it on DVD from ebay, when trying DVD installation my PC is displaying: There is a problem with the configuration server (/usr/lib/Gconf-sanity- check - 2 exited with status 256, I would like to install this rather then just run it off disk

View 9 Replies View Related

Programming :: Can't Compile C++ App *** Exited With Status: 77 ***?

Jan 7, 2009

I'm trying to compile a c++ application in KDevelop in Ubuntu 8.10. I get this error on Distclean:

aclocal
autoheader
automake

[code]....

View 19 Replies View Related

Fedora :: NBM Service Status Running / Exited

Jun 11, 2011

What is the proper way to make the smb and nmb services start (and keep running) automatically? I have successfully configured samba on my F15 box, but sometimes the other boxes cant see it. I check the status of smb and nmb and smb is running and active, but nmb status is "Running (exited)". If I manually restart nmb then nmb status changes to "Running (active)" and the problem goes away. However I want it to start (and keep running) automatically as it should. I am thinking maybe the problem is the way I set smb and nmb to start automatically.

I used
$chkconfig smb on
and
$chkconfig nmb on

Is this the correct way? if not, what is it? Maybe I need to be more specific about at which runlevels I want the services to start? I have googled, but found about 5 diferent methods to make this services start automatically, some with systemctrl, some editing files, chkconfig, and even the system-config-services app (which seems broken in f15 btw) and don't know which one to use.

View 9 Replies View Related

Server :: Squid Parent: Child Process XXXXX Exited With Status 1?

May 24, 2010

I have a transparent proxy Squid-3.0 on Slackware 12.2. I used cron to restart squid every day at 7:30 AM (just /path.to.squid/squid -k kill && /path.to.squid/squid) Some days ago I saw in /var/log/messages that Squid was killed but haven't started. I started it manually and everything was OK. But today everything repeated. And the log file is interesting. I tried to find about it on http://squid-cache.org/ but al in vain. This is from /var/log/messages :

Code:

May 24 07:30:02 konura squid[17188]: Squid Parent: child process 17199 exited due to signal 9
May 24 07:30:02 konura squid[19038]: Squid Parent: child process 19040 started
May 24 07:30:03 konura squid[19038]: Squid Parent: child process 19040 exited with status 1
May 24 07:30:06 konura squid[19038]: Squid Parent: child process 19045 started

[code]....

I need to say that I haven't edited the config file for a long time, but this problem started to happen. ADDED, Solved: I'm not sure, but maybe I found the decision. I deleted about 400 mb of Sarg logs from /var partition. And now squid runs well. Besides, before deleting old logs, 'crontab -e' and 'pkgtool' didn't work And the system wrote me that it's no space left on device. At the same time, 'df -h' showed me that all partitions had enough free space. Seems strange, but that's it. After deleting old proxy statistics, generated by Sarg (this is about 400 mb) 1)squid runs OK and 2)there are no more that annoying messages about abscence of free space.

View 1 Replies View Related

Ubuntu Servers :: Interpreting Mdadm RAID1 Status?

Feb 7, 2011

I have a RAID1 array, where mdadm states that one of the disks is "removed." Naturally, I assume one of the drives has failed. The mdadm --detail command tells me that the sda drive has failed. However, further inspection from the mdadm -E /dev/sdb1 command says that sdb1 disk has been removed. I am a bit confused. Can someone clarify which drive is failed? Am I misreading the command outputs?

Code:
sudo fdisk -l
Disk /dev/sda: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes

[Code]...

View 3 Replies View Related

OpenSUSE Install :: Dmraid Vs Mdadm And RAID Status Monitoring?

Apr 22, 2011

I'm pretty new to FakeRAID vs JBOD in a software RAID, and could use some help/advice. I recently installed 11.4 on a brand new server system that I pieced together, using Intel RAID ICH10r on an ASUS P8P67 Evo board with 2500K Sandy Bridge CPU. I have two RAIDs setup, one RAID-1 mirror for the system drive and /home, and the other consists of four drives in RAID-5 for a /data mount.

Installing 11.4 seemed a bit problematic. I ran into this problem: [URL]... I magically got around it by installing from the live KDE version with all updates downloaded before the install. When prompted, I specified I would like to use mdadm (it asked me), however it proceeded to setup a dmraid. I suspect this is because I have fake raid enabled via the bios. Am I correct in this? Or should I still be able to use mdadm with bios raid setup?

Anyways, to make a long story short, I now have the server mostly running with dmraid installed vice mdadm. I have read many stories online that seem to indicate that dmraid is unreliable versus mdadm, especially when used with newer SATA drives like I happen to be using. Is it worth re-installing the OS with the drives in JBOD and then having mdadm configure a linux software raid? Are their massive implications one way or another on if I do or do not install mdadm or keep dmraid?

Finally, what could I use to monitor the health and status of a dmraid? mdadm seems to have it's own monitoring associated with it when I was glazing over the man pages.

View 9 Replies View Related

Ubuntu Servers :: Mdadm Incoonsistent Status On Disks In Same Array

Jan 21, 2011

when I start my raid5, only 2 disks of 3 are active on md0. The 3rd disk is inactive on md_d0.When I do mdadm --examine, the two active disks report 2 active, 2 working, 1 failed. the inactive disk resports 3 active, 3 working, 0 failed.

View 2 Replies View Related

Fedora :: MDADM On 12 64bit - Error "mdadm: Cannot Add Disks To A 'member' Array, Perform This Operation On The Parent Container"

Nov 22, 2009

Here's a brief description of my system:

120GB Sata HDD - Primary OS drive
3 x 1.0TB Sata HDD - Raid 5 array

This is on a C2D MSI P35 Platinum board. Anyway, did a fresh install of F12 on the 120GB, which I had problems with - Anaconda refused to see the drive. Fedora Live could see it fine, and it was listed as an 'nvidia_raid_member' - no idea why, but I completely erased the disc under the Live CD and proceeded to install F12.

Once F12 was installed, I loaded up mdadm to re-activate my Raid 5 array, using 'sudo mdadm --assemble --uuidthe uuid) - and it started with only 2 of the 3 drives. My /dev/sdb drive did not activate into the array, due to what mdadm said was a mismatched UUID. Ok, so I erased /dev/sdb, intending to rebuild the array. Erased /dev/sdb, and then attempted 'sudo mdadm --add /dev/md0 /dev/sdb' and I get this error: "mdadm: Cannot add disks to a 'member' array, perform this operation on the parent container" - I can find NO information on this error message.

[Code].....

I don't believe the hard drives are connected in the exact same order they were in before - I disconnected everything in the system and blew it out (it was pretty dusty)

View 1 Replies View Related

Debian Configuration :: Error Starting Domain: Internal Error Process Exited While Reading Console Log Output

Sep 9, 2010

I have mounted an NFS share with ISO images on my kvm Server. If i connect such a iso to a VM (using virt-manager) for installing a operating system i get the following error on startup: Error starting domain: internal error Process exited while reading console log output: char device redirected to /dev/pts/1 qemu: could not open disk image /mnt/iso/public/Linux/Distributions/Debian/debian-504-amd64-netinst.iso: Permission denied

The problem is definitly that kvm (or qemu or libvirt-bin, i don't know) tries to set permissions (rwx owner for libvirt-qemu, --- for kvm group, --- for other) on the file, although it has read permissions. Is it possible to change this behavior?

View 1 Replies View Related

Ubuntu Installation :: Mdadm Using "sudo Apt-get Install Mdadm" - Error "Generating Array Device Nodes"

Jan 11, 2010

I am planning on setting up a 4x1TB RAID5 with mdadm under Ubuntu 9.10. I tried installing mdadm using "sudo apt-get install mdadm", all worked fine except for the following error: Code: Generating array device nodes... /var/lib/dpkg/info/mdadm.postinst: 170: /dev/MAKEDEV: not found failed. The end result is the /dev/md0 device has not been created, as can be seen here:


Code: windsok@beer:~$ mdadm --detail /dev/md0 mdadm: cannot open /dev/md0: No such file or directory After googling, I found the following bug which describes the issue: [URL] However it was reported way back in April 2009, and it does not look like it will be fixed any time soon, so I was wondering if anyone knows a workaround for this bug, to get me up and running?

View 4 Replies View Related

Ubuntu :: Vidalia Error: 'Tor Software Exited Unexpectedly'

Feb 5, 2010

Everytime I shutdown/restart my computer without properly turning off the Tor network and get the following message from Vidalia:

"Vidalia detected that the Tor software exited unexpectedly"

The only way I can get Vidalia to work again is to reinstall Vidalia.

View 2 Replies View Related

Ubuntu :: Error: Unmount Exited With Exit Code 1

Jul 10, 2011

using 'ntfs-config' to make ntfs partitions mount on bootup so that I can access my data partition from Ubuntu. The first time I installed ntfs-config it would not run. I uninstalled and reinstalled it and then it ran, but it didn't seem to be responding very well. I attempted to tick the partition I wanted and set it to be writeable. After I closed the app ALL my ntfs partitions were mounted, even the windows and system reserved partitions, and when I attempted to unmount them I got the following error:

Unable to unmount Data
Error unmounting: unmount exited with exit code 1:
helper failed with
unmount /dev/mapper/isw_dfjjdefcdi_RAID5p4 is not mounted (according to mtab)

I tried rebooting. I tried uninstalling ntfs-config, then reinstalling it (now it wont run again). So I'm at a loss as to what to do. I simply want my data partition mounted on boot up and writable, not the others.

View 4 Replies View Related

Ubuntu :: Error Mounting: Mount Exited With Exit Code 21

Oct 23, 2010

I have been running a live version on a 8 gig stick. Played nice for a couple of months but now when I try to access the native ntfs file system, I get the following error message.... Error mounting: mount exited with exit code 21: mount: according to mtab, /dev/sda6 is already mounted on /media/c

View 1 Replies View Related

Ubuntu :: Error Mounting: Mount Exited With Exit Code 2

Mar 26, 2011

My computer has been acting quite strange lately. It's been taking longer to boot, and my sound doesn't play anymore (Only a high pitched sound is heard, and no hardware for sound is detected). Just recently, my Windows 7 Partition returned the error of Disk Error Occured. Press CTRL+ALT+DEL to restart.

Any way I can fix my whole issue, I think my desktop is starting to die on me :O (And its only about 7 months old T_T)

View 4 Replies View Related

Ubuntu :: Error Mounting Mount Exited With Exit Code 13?

Mar 29, 2011

my windows xp system has recently been messed up, everytime i boot, i see the windows logo and then it reboots so i decided to liveboot ubuntu in order to recover the important files on my hard drive and then reboot. Problem is when i try to click on my "500GB Filesystem" I get this message.Unable to mount 500GB FilesystemError mounting: mount exited with code 13:ntfs_attr_pread_i:ntfs_pread failed:/input/output error Failed to read NTFS $Bitmap:Input/output error NTFS is either inconsistent, or there is a hardware fault, or it's a SoftRAID/FakeRAID hardware. In the first case run chkdsk/f on Windows then reboot into Windows twice.The usage of the /f parameter is very important! If the device is SoftRAID/FakeRAID then first activate it and mount a different device under the /dev/mapper/directory(e.g./dev/mapper/nividia_eahaabcc1). Please see the 'dmraid' documentationfor more details

View 1 Replies View Related

CentOS 5 :: "Error Creating Live CD : Mksquashfs Exited With Error (1)"?

Jul 16, 2009

ivecd-tools mksquaush error on centos5.2I want to make a custom livecd. But I can't."Error creating Live CD : mksquashfs exited with error (1)"What shuld I do?hat log shuld I check?I did like this...centos5.2/i386Access livecd project site.Install livecd repo's syslinux and livecd-tools.download centos-livecd-minimal.ks project site.I have centos5.3 machine on vmware server install above 5.2 physical machine.But the 5.3 machine said same messages(mksquashfs exited ...)

View 2 Replies View Related

Debian Installation :: Squeeze Dist-upgrade Exited With Error Continue From?

Apr 21, 2011

I was upgrading from lenny to squeeze. At the apt-get dist-upgrade step, at some point (after upgrading and configuring) it tried to create a new certificate for my mail server but creation of the certificate failed, dpkg reported an error and the whole process exited with error. So I rebooted the machine and issued again apt-get dist-upgrade but now the certificate was created successfully . After that it upgraded mysql-client and the process finished.

But I don't know if configuring of the upgraded packages has stopped at the point where dpkg stopped. I suppose so, because very few packages were configured at that point. Is the solution to run dpkg-reconfingure -a (or -u ?) or dpkg --confingure -a or something else ? (dpkg has the PACKAGE STATES)

dpkg --configure --pending gives me no package for configuration.PS: At least I hope that all packages were upgraded and a few were not configured. Is there a way to confirm that all packages were upgraded ?

View 2 Replies View Related

Ubuntu :: External Drive - Message - Error Mounting: Mount Exited With Exit Code 32

Mar 31, 2010

Accidentally the usb plug on my WD "My Book" got halfway unplugged and I didn't notice it. when I rebooted it, it wouldn't read the drive. I tried using G Parted to repair it but no success, it just runs forever accessing the drive and never finishes. (I left it running an entire weekend and it didn't finish) the drive is formated ext3.

When I try to mount the drive in Ubuntu 9.10 it gives this error message:

Strangely if I boot into Windows and use the ext driver I can access the drive just fine. is this something I can fix? if needed I can use Windows to do any repairs.

View 4 Replies View Related

General :: Error Calling Get_folders: Launch Helper Exited With Unknown Return Code 1

Jul 18, 2010

hi..
I'm using ubuntu 10.04 and whenever i start nautilus from command line it shows error:

Code:
root@aduait-laptop:~/Desktop# nautilus
Initializing nautilus-gdu extension
** (nautilus:9990): WARNING **: Error calling get_folders: Launch helper exited with unknown return code 1
** (nautilus:9990): WARNING **: Error calling get_folders: Launch helper exited with unknown return code 1
** (nautilus:9990): WARNING **: Error calling get_folders: Launch helper exited with unknown return code 1
** (nautilus:9990): WARNING **: Error calling get_folders: Launch helper exited with unknown return code 1
** (nautilus:9990): WARNING **: Error calling get_folders: Launch helper exited with unknown return code 1

View 5 Replies View Related

Debian Hardware :: "Error Mounting: Mount Exited With Exit Code 1: Helper Failed With

Feb 12, 2011

I get the following message when trying to access my 1tb usb drive "Error mounting: mount exited with exit code 1: helper failed with: Error opening '/dev/sdr1': Permission denied Failed to mount '/dev/sdr1': Permission denied Please check '/dev/sdr1' and the ntfs-3g binary permissions, and the mounting user ID.More explanation is provided at [URL].. Really wierd thing is Linux Mint Debian reads it just fine

View 1 Replies View Related

Ubuntu :: Expansion Drive Disconnecting - Error: Mount Exited With Exit Code 13: $MFTMirr Does Not Match $MFT (record 0)

Jun 1, 2010

I slipped on my expansion drive cable and it disconnected quickly, when I reconnected I got this error: Error mounting: mount exited with exit code 13: $MFTMirr does not match $MFT (record 0). Failed to mount '/dev/sdb1': Input/output error NTFS is either inconsistent, or there is a hardware fault, or it's a SoftRAID/FakeRAID hardware. In the first case run chkdsk /f on Windows then reboot into Windows twice. The usage of the /f parameter is very important! If the device is a SoftRAID/FakeRAID then first activate it and mount a different device under the /dev/mapper/ directory, (e.g. /dev/mapper/nvidia_eahaabcc1). Please see the 'dmraid' documentation for more details.

View 1 Replies View Related

Ubuntu :: Error: Subprocess Installed Post-removal Script Returned Error Exit Status 1?

Apr 21, 2011

I can't get any updates for my system and keep getting the errors shown below, and suggestions peeps?

E: linux-image-2.6.28-11-generic: subprocess installed post-removal script returned error exit status 1
E: linux-image-2.6.28-13-generic: subprocess installed post-removal script returned error exit status 1
E: linux-image-2.6.28-14-generic: subprocess installed post-removal script returned error exit status 1
E: linux-image-2.6.28-15-generic: subprocess installed post-removal script returned error exit status 1
E: linux-image-2.6.28-19-generic: subprocess installed post-removal script returned error exit status 1

View 9 Replies View Related

Ubuntu :: Unable To Mount Internal Drive - Error: Mount Exited With Exit Code 1: Helper Failed

Aug 5, 2010

I have 2 internal drives. One is for the OS and one is for the Data. I tried to get the Data drive to mount automatically at login using some crap I found on a linux blog. Safe to say it didn't work and now I can't mount it with the OS on the OS Drive.

It mounts from a live CD and all the data is perfectly safe. When I try to mount the drive I get this error message: "Error mounting: mount exited with exit code 1: helper failed with: mount: only root can mount /dev/sdb1 on /media/data" What have I done wrong and how can I make it mount again? Preferably this time at login.

View 2 Replies View Related

Ubuntu :: Cannot Mount Partitions Anymore - Error Mounting: Mount Exited With Exit Code 1: Helper Failed

Aug 24, 2010

First of all: it's been more than 12 years ago since I worked with Linux, and a lot has changed in the meantime. But I considered it a challenge to install Ubuntu 9.10 and lateron upgraded to 10.04 LTS without any troubles, until now:

Except my main partition ("/") all other partitions fail to mount. All NTFS partitions from my other OS and also 2 other linux ext4 partitions I've made are not accessible anymore. and, what bothers me the most: I deleted those 2 new linux partitions in the meantime because I couldn't access them initially because Root was the owner (Duh! root is standard disabled in Ubuntu, right?). After an attempt to try to automount all partitions following the help guides I got now big grey errors on my splashscreen while booting, telling that an error occured with e.g. /media/Backup because it is missing or it cannot be mounted, with 3 options below: waiting, skipping or using a command prompt to solve this. I always choose Skip for safety.

Now if I want to see the content of all my other partitions I got a popup telling me unable to mount e.g. /media/Downloads and the message included:

[Code]....

View 9 Replies View Related

Ubuntu Installation :: Cant Upgrade 2.6.35-25 Kernel / Error Post-removal Script Returned Error Exit Status 1?

Mar 14, 2011

I dont know how to put this that somobody would understand my problem but here we go. I have problem like said in title.I am unable to upgrade my kernel. Sunaptics says that I have 2.6.35-28 installed. I tried to reinstall 2.6.35-28 via synaptics but it gives me error.

Thats what uname -a says:

pekka@pekka-laptop:~$ uname -a
Linux pekka-laptop 2.6.35-25-generic #44-Ubuntu SMP Fri Jan 21 17:40:48 UTC 2011 i686 GNU/Linux

Tried to install 2.6.35-27 via terminal thats what I get:

Code:
pekka@pekka-laptop:~$ sudo apt-get install linux-image-2.6.35-27
[sudo] password for pekka:
Reading package lists... Done
Building dependency tree
code....

dpkg: error processing linux-image-2.6.35-25-generic (--remove):
subprocess installed post-removal script returned error exit status 1
Errors were encountered while processing:
linux-image-2.6.35-25-generic
E: Sub-process /usr/bin/dpkg returned an error code (1)
pekka@pekka-laptop:

View 9 Replies View Related

General :: MDADM Error: Creating A RAID 1 RAM Disk?

Apr 7, 2011

I am trying to create a Raid 1 ram disk. Below are the commands I used:

[root@abidbodal dev]# mke2fs -m 0 /dev/ram8
[root@abidbodal dev]# mount /dev/ram8 /mnt/rd8
[root@abidbodal dev]# mke2fs -m 0 /dev/ram9

[code]....

View 3 Replies View Related

Debian Hardware :: DVD Slower System - Error Benchmarking: "helper Exited With Exit Code 1: Device /dev/sr0 Is Too Slow To Benchmark"

Oct 25, 2010

when i want copy something from dvd my debian squeeze is total slow cpu ussage is 100% and write 2.2 mb/s and musick is stop and play. This same is on burning cd /dvd the device buffer is an about 10-15% this dvd is Pionier 116D on windows xp work perfect. I try benchmark dvd form gnome-disk-utility but i got Error benchmarking: helper exited with exit code 1: Device /dev/sr0 is too slow to benchmark

[Code]....

( everything works on debian lenny on the old kernel 2.6.26 ) I instaling a few kernel and compiling 2.6.35.7 with .config file form ubuntu on finaly didn't help

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved