Ubuntu Installation :: /usr/lib/libgconf2-4/gconf-sanity-check-2 Exited With Error Status 256

Sep 6, 2010

yesterday i tried to install bt4 from alongside ubuntu 10.04. Unfortunately the DVD had some errors and the installation stopped. Everything was fine till then, even the GRUB was working(i guess!) but when i tried to log into my Ubuntu it gave me an error... " /usr/lib/libgconf2-4/gconf-sanity-check-2 exited with error status 256" also there was a popup like "gnome power management was not properly installed ....blah blah blah Contact you network admin"

i have only one user on that system. i tried the single user mode but no success... i then tried to Ctrl+Alt+F1-F6 no success... can't switch to command line(this is my display problem i guess)

i have now decided to install a fresh install but i do need to take the backup. What all should i copy to the new install so that i get the same feel as before?

View 1 Replies


ADVERTISEMENT

Ubuntu :: Error After Updates - Gconf-sanity-check-2 Exited With Status 32512

Jul 22, 2011

I ran update through the terminal and rebooted i get this error message on start up and again after I log in Please Help!! I'm running Ubuntu 11.04 using unity 2d and the latest version of Gnome 2 on a Dell Inspiron 5150 laptop There is a problem with the configuration server. (/usr/lib/libgconf2-4/gconf-sanity-check-2 exited with status 32512)

View 5 Replies View Related

OpenSUSE Install :: Not Working Right - Error "There Is A Problem With The Configuration Server (/usr/lib/Gconf-sanity- Check - 2 Exited With Status 256"

Jun 20, 2011

Having downloaded 11.4 Gnome, finding it did not install I bought it on DVD from ebay, when trying DVD installation my PC is displaying: There is a problem with the configuration server (/usr/lib/Gconf-sanity- check - 2 exited with status 256, I would like to install this rather then just run it off disk

View 9 Replies View Related

Red Hat :: Error: Mdadm Exited With Status: 127?

Jan 11, 2011

After installing a new Rhel6.0 64bit on VMWare i got the information:
{
disabling swap...
/dev/dm-1
unmounting filesystems...
/mnt/runtime done
code....

View 6 Replies View Related

General :: Configure: Error: C++ Preprocessor "/lib/cpp" Fails Sanity Check

Jan 1, 2011

when trying to install a tarball i am getting the following error when configuring:

configure: error: in `/home/server/tazzed/mkahawa-printer-0.0.1':
configure: error: C++ preprocessor "/lib/cpp" fails sanity check

View 2 Replies View Related

General :: Tools To Check An HD For Sanity?

Sep 10, 2010

Updating my kernel corrupted grub preventing me from booting. Running the grub shell to restore the primary stage bootloader, restored bootability. It is important to note, that several months ago, I had a similar failure that corrupted the MBR.Are there any Linux based tools to check an HD for sanity? By the latter I am not only understanding software integrity but also hardware sanity.

View 1 Replies View Related

General :: Lib/cpp Fails Sanity Check?

Mar 17, 2010

am trying to build some programs like lmms or qtraktorbut I often get the reported erro

View 3 Replies View Related

Programming :: Can't Compile C++ App *** Exited With Status: 77 ***?

Jan 7, 2009

I'm trying to compile a c++ application in KDevelop in Ubuntu 8.10. I get this error on Distclean:

aclocal
autoheader
automake

[code]....

View 19 Replies View Related

Programming :: C Preprocessor Fails Sanity Check?

Jan 31, 2010

Recently, every time I try to compile an app from its source code, after issuing the ./configure command I get this message:configure: error: C preprocessor "/lib/cpp" fails sanity checkSee `config.log' for more details.I check /lib/cpp but there is not directory named /cpp under /libthis problem occurs on all source packages.

View 3 Replies View Related

Fedora :: NBM Service Status Running / Exited

Jun 11, 2011

What is the proper way to make the smb and nmb services start (and keep running) automatically? I have successfully configured samba on my F15 box, but sometimes the other boxes cant see it. I check the status of smb and nmb and smb is running and active, but nmb status is "Running (exited)". If I manually restart nmb then nmb status changes to "Running (active)" and the problem goes away. However I want it to start (and keep running) automatically as it should. I am thinking maybe the problem is the way I set smb and nmb to start automatically.

I used
$chkconfig smb on
and
$chkconfig nmb on

Is this the correct way? if not, what is it? Maybe I need to be more specific about at which runlevels I want the services to start? I have googled, but found about 5 diferent methods to make this services start automatically, some with systemctrl, some editing files, chkconfig, and even the system-config-services app (which seems broken in f15 btw) and don't know which one to use.

View 9 Replies View Related

Fedora :: Compiling Code - Failing Sanity Check

Dec 7, 2009

Keep receiving the following error message when i try to compile any code:
Code:
checking how to run the C++ preprocessor... /lib/cpp
configure: error: C++ preprocessor "/lib/cpp" fails sanity check
logs test out some code with the C preprocessor and fail, thereby failing the "sanity check" I reinstalled cpp, but to no avail.

View 1 Replies View Related

Software :: Gcc Sanity Check Fails After Restore Tar Backup?

Jul 2, 2010

is I've restored a tar.bz2 backup I've made, all fine until it comes to configure/make.the backup was made on my laptop, the transferred to another computer, I used tarxvpf filename
and sure backup was madetar -zcvpf filename / (--exclude=dev etc)dist is lfs,he laptopstill works fine, file date, size, mods all the same so quite pu as to way I get"/lib/gcc failed sanity check"when running .configurep.s. laptop and computer both based

View 2 Replies View Related

Software :: C Preprocessor /lib/cpp Fails Sanity Check - Every Single Time

Aug 3, 2010

I have no idea what I've done but I can't compile from source anymore.
VectorLinux standard 6.0

everything I try to compile fails at ./configure with an error :

Quote:

The content of config.log: (kinda long)

Quote:

This file contains any messages produced by compilers while running configure, to aid debugging if configure makes a mistake.

It was created by mpc configure 0.8.2, which was generated by GNU Autoconf 2.65.

Invocation command line was:

configure: exit 1

I was intending to recompile gcc from source instead of the the one came with the distro, but to do so I need MPC, which I can't compile.

View 18 Replies View Related

Server :: Squid Parent: Child Process XXXXX Exited With Status 1?

May 24, 2010

I have a transparent proxy Squid-3.0 on Slackware 12.2. I used cron to restart squid every day at 7:30 AM (just /path.to.squid/squid -k kill && /path.to.squid/squid) Some days ago I saw in /var/log/messages that Squid was killed but haven't started. I started it manually and everything was OK. But today everything repeated. And the log file is interesting. I tried to find about it on http://squid-cache.org/ but al in vain. This is from /var/log/messages :

Code:

May 24 07:30:02 konura squid[17188]: Squid Parent: child process 17199 exited due to signal 9
May 24 07:30:02 konura squid[19038]: Squid Parent: child process 19040 started
May 24 07:30:03 konura squid[19038]: Squid Parent: child process 19040 exited with status 1
May 24 07:30:06 konura squid[19038]: Squid Parent: child process 19045 started

[code]....

I need to say that I haven't edited the config file for a long time, but this problem started to happen. ADDED, Solved: I'm not sure, but maybe I found the decision. I deleted about 400 mb of Sarg logs from /var partition. And now squid runs well. Besides, before deleting old logs, 'crontab -e' and 'pkgtool' didn't work And the system wrote me that it's no space left on device. At the same time, 'df -h' showed me that all partitions had enough free space. Seems strange, but that's it. After deleting old proxy statistics, generated by Sarg (this is about 400 mb) 1)squid runs OK and 2)there are no more that annoying messages about abscence of free space.

View 1 Replies View Related

Debian Installation :: Squeeze Dist-upgrade Exited With Error Continue From?

Apr 21, 2011

I was upgrading from lenny to squeeze. At the apt-get dist-upgrade step, at some point (after upgrading and configuring) it tried to create a new certificate for my mail server but creation of the certificate failed, dpkg reported an error and the whole process exited with error. So I rebooted the machine and issued again apt-get dist-upgrade but now the certificate was created successfully . After that it upgraded mysql-client and the process finished.

But I don't know if configuring of the upgraded packages has stopped at the point where dpkg stopped. I suppose so, because very few packages were configured at that point. Is the solution to run dpkg-reconfingure -a (or -u ?) or dpkg --confingure -a or something else ? (dpkg has the PACKAGE STATES)

dpkg --configure --pending gives me no package for configuration.PS: At least I hope that all packages were upgraded and a few were not configured. Is there a way to confirm that all packages were upgraded ?

View 2 Replies View Related

Ubuntu Installation :: Cant Upgrade 2.6.35-25 Kernel / Error Post-removal Script Returned Error Exit Status 1?

Mar 14, 2011

I dont know how to put this that somobody would understand my problem but here we go. I have problem like said in title.I am unable to upgrade my kernel. Sunaptics says that I have 2.6.35-28 installed. I tried to reinstall 2.6.35-28 via synaptics but it gives me error.

Thats what uname -a says:

pekka@pekka-laptop:~$ uname -a
Linux pekka-laptop 2.6.35-25-generic #44-Ubuntu SMP Fri Jan 21 17:40:48 UTC 2011 i686 GNU/Linux

Tried to install 2.6.35-27 via terminal thats what I get:

Code:
pekka@pekka-laptop:~$ sudo apt-get install linux-image-2.6.35-27
[sudo] password for pekka:
Reading package lists... Done
Building dependency tree
code....

dpkg: error processing linux-image-2.6.35-25-generic (--remove):
subprocess installed post-removal script returned error exit status 1
Errors were encountered while processing:
linux-image-2.6.35-25-generic
E: Sub-process /usr/bin/dpkg returned an error code (1)
pekka@pekka-laptop:

View 9 Replies View Related

Ubuntu Installation :: Device Busy Using Image Scan - Reports Could Not Send Command To Scanner Check The Scanner Status

Apr 9, 2010

Have Karmic 9.10 ,Changed from Epson RX595 all in 1 (uses a ton of ink)Got the Lexmark Pro 805 3 in 1 because it says it supports Linux and the ink cartridge only cost $5 downloaded drivers and printer works but using Xsane Image Scanner error reports

'Lexmark_1_0_0:libsub/001/009': Device busy Using Image Scan - reports Could not send command to scanner Check the scanner status. The RX595's scanner drivers had to been manually instatlled,, in the Printer box the Lexmark shows available..

View 3 Replies View Related

Debian Configuration :: Error Starting Domain: Internal Error Process Exited While Reading Console Log Output

Sep 9, 2010

I have mounted an NFS share with ISO images on my kvm Server. If i connect such a iso to a VM (using virt-manager) for installing a operating system i get the following error on startup: Error starting domain: internal error Process exited while reading console log output: char device redirected to /dev/pts/1 qemu: could not open disk image /mnt/iso/public/Linux/Distributions/Debian/debian-504-amd64-netinst.iso: Permission denied

The problem is definitly that kvm (or qemu or libvirt-bin, i don't know) tries to set permissions (rwx owner for libvirt-qemu, --- for kvm group, --- for other) on the file, although it has read permissions. Is it possible to change this behavior?

View 1 Replies View Related

Ubuntu Installation :: E: Sun-java6-plugin: Subprocess Installed Post-installation Script Returned Error Exit Status 2

May 6, 2010

I get this error whenever trying to update or install applications:

Quote:

E: sun-java6-plugin: subprocess installed post-installation script returned error exit status 2

What can I do here?

View 2 Replies View Related

Ubuntu Installation :: E: Lib32nss-mdns: Subprocess Installed Post-installation Script Returned Error Exit Status 2

Jun 4, 2010

Everytime I attempt to install anything, in any way, I'm given the following error message:

E: lib32nss-mdns: subprocess installed post-installation script returned error exit status 2
E: wine1.2: dependency problems - leaving unconfigured

I went into Synaptics Package Manager and told it to uninstall WINE in case that was what was causing the problems. It sort of half-uninstalled-it then gave me that exact same error message.I have two threads currently open on the forums - adjusting laptop brightness and flashing BIOS - and both problems hit a brick wall because of this same error message.

View 2 Replies View Related

Ubuntu :: Vidalia Error: 'Tor Software Exited Unexpectedly'

Feb 5, 2010

Everytime I shutdown/restart my computer without properly turning off the Tor network and get the following message from Vidalia:

"Vidalia detected that the Tor software exited unexpectedly"

The only way I can get Vidalia to work again is to reinstall Vidalia.

View 2 Replies View Related

Ubuntu :: Error: Unmount Exited With Exit Code 1

Jul 10, 2011

using 'ntfs-config' to make ntfs partitions mount on bootup so that I can access my data partition from Ubuntu. The first time I installed ntfs-config it would not run. I uninstalled and reinstalled it and then it ran, but it didn't seem to be responding very well. I attempted to tick the partition I wanted and set it to be writeable. After I closed the app ALL my ntfs partitions were mounted, even the windows and system reserved partitions, and when I attempted to unmount them I got the following error:

Unable to unmount Data
Error unmounting: unmount exited with exit code 1:
helper failed with
unmount /dev/mapper/isw_dfjjdefcdi_RAID5p4 is not mounted (according to mtab)

I tried rebooting. I tried uninstalling ntfs-config, then reinstalling it (now it wont run again). So I'm at a loss as to what to do. I simply want my data partition mounted on boot up and writable, not the others.

View 4 Replies View Related

Ubuntu Installation :: Backuppc Error Exit Status 1?

Jun 28, 2010

"E: backuppc: subprocess installed post-installation script returned error exit status 1"whenever I upgrade my system I get the above message Anyone know how to fix it? or if it's anything important ?

View 1 Replies View Related

Ubuntu :: How Can I Check Status Of User Partition

Nov 20, 2010

Ubuntu server, no GUI installed; two partitions: OS and user.How can I check the status of the user partition? E.g. Free space, directory, etc

View 2 Replies View Related

Ubuntu :: Error Mounting: Mount Exited With Exit Code 21

Oct 23, 2010

I have been running a live version on a 8 gig stick. Played nice for a couple of months but now when I try to access the native ntfs file system, I get the following error message.... Error mounting: mount exited with exit code 21: mount: according to mtab, /dev/sda6 is already mounted on /media/c

View 1 Replies View Related

Ubuntu :: Error Mounting: Mount Exited With Exit Code 2

Mar 26, 2011

My computer has been acting quite strange lately. It's been taking longer to boot, and my sound doesn't play anymore (Only a high pitched sound is heard, and no hardware for sound is detected). Just recently, my Windows 7 Partition returned the error of Disk Error Occured. Press CTRL+ALT+DEL to restart.

Any way I can fix my whole issue, I think my desktop is starting to die on me :O (And its only about 7 months old T_T)

View 4 Replies View Related

Ubuntu :: Error Mounting Mount Exited With Exit Code 13?

Mar 29, 2011

my windows xp system has recently been messed up, everytime i boot, i see the windows logo and then it reboots so i decided to liveboot ubuntu in order to recover the important files on my hard drive and then reboot. Problem is when i try to click on my "500GB Filesystem" I get this message.Unable to mount 500GB FilesystemError mounting: mount exited with code 13:ntfs_attr_pread_i:ntfs_pread failed:/input/output error Failed to read NTFS $Bitmap:Input/output error NTFS is either inconsistent, or there is a hardware fault, or it's a SoftRAID/FakeRAID hardware. In the first case run chkdsk/f on Windows then reboot into Windows twice.The usage of the /f parameter is very important! If the device is SoftRAID/FakeRAID then first activate it and mount a different device under the /dev/mapper/directory(e.g./dev/mapper/nividia_eahaabcc1). Please see the 'dmraid' documentationfor more details

View 1 Replies View Related

Red Hat / Fedora :: How To Check The Network Status

May 20, 2009

want to know what is the cmd to ping/check the link speed or something like Network Info. If for server checking (Show information CPI info) is (cat /proc/cpuinfo ) (correct me if im wrong)

View 4 Replies View Related

Hardware :: How To Check RAID Status

Jul 15, 2009

We have a Dell Poweredge 1750 server with 2 harddrives in RAID 1 running Debian Etch. Yesterday one of the hardrives stopped working but no error message appeared in syslog. The only indication was the amber LED diode. Is there a software way how to check that both disks are OK?

View 5 Replies View Related

Ubuntu :: Check The Status Of Software Raid Array?

May 21, 2011

In Zentyal, it showed me active drives, if the array was degraded, and if there was any syncing happening when the array was building. How can I check that without Zentyal? Is there a terminal command or an application I can install to tell me the same information?

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved